Looking for the factory rom for my lg c900, as I flashed it to mango but cant restore nodo on it can someone help me out?
Here you go!
There are instructions and download links there.
When I flashed my Quantum, it took me a while to realise that (at the very very end), you need to press 'start' in the LGDP2 utility BEFORE connecting the phone. So watch out for that.
thnx for that, i've seen the thread and downloaded everything, but this step:
"2. Install LG United Modem Driver, connect the phone to PC through USB cable and let the drivers to be installed. USB 1.1 is recommended."
I dont get what to do, after I install the united modem driver, and not sure where or how to get the firmware that it lists in step 3:
3. You'll need firmware in DZ format and the correct DLL for your model.
2: You just download it and plug in your phone. Nothing really happens, but it's necessary because later, when you want to find out which COM port it's plugged into, you'll have to go into Device Manager and, under Modems, you'll find your phone and right-clicking it and selecting proprieties.
3: The DZ Firmware is the first file you downloaded (it's under FIRMWARES on the page I linked). You have to choose the right one for your phone (by carrier) and unpack the contents. In there, you'll find a .DZ file.
A link to the DLL files is also provided (the word DLL in that step is the link). Again, download the right one (the one with the letter at the end of C900 that corresponds with the Firmware you downloaded - nothing (US), C (Canada) or K (Australia or NZ).
If you have any more problems with the instructions, just ask. We'll keep them on this thread in case anyone else needs help with this in the future.
wow I cant believe I missed those links lol thnx alot, i got the dll and am downlading the DZ now, and ill let you know if i have any problems
Okay so I dl'ed the DZ file, but when i open the lgdp32 exe and select umts division, it gives me a fail to open dll file, and then has a ports selection screen with com 7 selected. And com 7 as IDLE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BTW this is with my phone unplugged, I noticed that nothing happened, and in device manager it just said drivers werent installed,but in emergency download mode it installs all drivers through the found new hardware wizard.
And got this during the installation:
though I'm not sure how to resolve that last issue, I do know how to fix the idle problem: ignore it. It took me forever to realize that: just press ok and then, in the main window, press start. Then connect the phone.
Also, are you sure that it's connected into port 7? Did you check in the device manager?
well the first time i plugged in the phone i was able to check and it said port 0, but I dont see that, but now that its giving me this INF message, when i click properties now the device manager just stops responding for some reason.
EDIT:when i have the phone plugged in normally, not emergency download, it says this:
Location 0 (USB Device)
for the port, but i dont see a com 0 option?
Oddly enough, my phone is now saying theres an update available, but it doesnt sync with the zune software for some reason.
EDIT:just got the installation fixed, and this is the modem page for the device manager.
I did everthing you told me, and found the com port(it was com 3), but when i hit start and plug in the phone in emergency download mode, nothing happens for some reason.
Are you sure that you're using the LGDP2_V36?
You said V32 earlier and I just noticed it. If that's the programme you've been using, try it with the V36 in its stead.
yeah I've been using the 36 one, sorry about misposting not sure what to do now though.
Could the error message "cant find monitor port" have anything to do with this?
Ok, so Today I had to flash my device anyway, so I went through the steps to get more insight into your problems.
What I learned is that you have to ignore all the problems.
So, once you've installed the LG drivers, plug the phone in in Emergency Download Mode and let the computer do whatever it needs to. If there's an error, that's fine. Next step.
Start the LGDP2_V36 UMTS and ignore any problem you're given once you've chosen the option UMTS.
In the bigger window that pops up, click ALL to select all the ports. It saves you the trouble of trying to find the port number of your Quantum.
Find the DLL and run the 'Download Configuration' and find the DZ Firmware. Press ok.
The 'Can't Find Monitor Port' doesn't mean anything. Press OK and continue.
Click Start first then plug in your phone in Emergency Download Mode.
Try this, then get back to me. I'll be checking the forum every 10-or-so minutes to help you resolve your problem as fast as possible.
okay im starting right now, ill just keep updating this post through out.
Update:installed drivers correctly with phone plugged in, unplugged it and started up LGDP2_V36 UMTS, then picked all com ports, found the dll and selected the dz file, hit ok, ignored the cant find monitor port, hit start, then plugged in the phone again in emergency download mode, but when i plug it in, all the ports still read idle, and then the found new hardware wizard still pops up even though i already installed it, then it gives me that INF error. The program is still running and the phone is still plugged in. What do i do from here?
Update:Just noticed that the LG united modem driver says Win7 in the folder name, Do I have to have windows 7? cause Im running XP SP3. and also theres two installation packages, am i supposed to install them both?
Sorry for the delay...
I'm not certain... I have Windows 7 on my PC. I'll do some searching and get back to you.
Here, try this Driver and give me news on how it worked.
Link!
I downloaded the driver detective setup thing, but its asking for a registration code, and I dont have $25 to spend
Ah. Let's try something cheaper.
Update: How about this?
the drivers installed fine, but its still doing the same thing, after i get past the port selection and hit start, when i plug in my phone, all the tiles still read idle, but now the device manager doesnt crash when i select properties for it, and it still says its in COM3. also on the ports selection, am i supposed to check off usb mode?
USB is not supposed to be checked.
okay, its still doing the same thing. I really appreciate all the help with this BTW
Related
Hello,
Let me start by saying that I went over the other similar threads and couldn't find a solution to my specific problem.
As you'll see from the following sequence of Kies screen captures, when I try to upgrade my phone's firmware, when it's supposed to start downloading the new version, it loses contact with the phone, doesn't download anything and then crashes. Even if it doesn't crash, it just reconnects, only to tell me that my phone needs an upgrade (duh!!!!) and the process goes on again and again.
Phase 1 - Upgrade Notification:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phase 2 - Upgrade Confirmation:
Phase 3 - Backup Confirmation:
Phase 4 - Lost Connection:
Phase 5 - The crash:
I tried many times, with or without backups, rebooted both my phone and PC several times and it always failed.
Note that I upgraded Kies to the latest version today and that didn't help either.
Any relevant advice would be highly appreciated as I have no clue on how to solve this issue.
Thanks a lot,
David
Can you try on a different PC? Just install Kies and try to upgrade and see if the same thing happens.
Also, in KIES top menus, there's an option to force a driver reinstallation on Windows. Try that to see if is solves in your own PC
Good luck
I don't have another PC
This happened to me. It was most likely due to my 3g mobile broadband. Kies doesn't like having other devices connected through USB besides the phone itself.
If you are using mobile broadband, try accessing the Internet via wifi or ethernet. If not, maybe you have something else connected through USB?
try with a wifi connection
i had exactly the same problem when tried with usb internet connection(crashed everytime) but with wifi it all went fine........no problem afterwards....
You could also try turning off(temporarily) your anti-virus/malware software.
elkikin said:
This happened to me. It was most likely due to my 3g mobile broadband. Kies doesn't like having other devices connected through USB besides the phone itself.
If you are using mobile broadband, try accessing the Internet via wifi or ethernet. If not, maybe you have something else connected through USB?
Click to expand...
Click to collapse
I don't have anything else connected to my Laptop's USB ports.
Laptops may fail as not enough power to USB port .
Your AV or Firewall may be a problem turn off .
Likewise turn of all running applications on Laptop .
jje
I removed and reinstalled Kies and now it advanced another step, but although the battery is fully charged, it says that the battery needs to be charged
Any suggestions??
I have had problem with Kies for throughout the last year with my S8500, tried everything possible and failed each and every time. But still I can make some suggestions,
1- It is right, try to do it with a Desktop PC, but Not with a Laptop/Netbook.
2- Try to do the same with a different OS, I had problem with XP x86, but it was gone with Win 7 x64.
3- At the last picture I notice that the Phone icon has a Lock icon next to it, so does your phone have some kind of password/code? If it is there try to remove it.
4- Battery doesn't need to be fully charged IMO, if it is over 50%it will do.
Regards.
Try a different microUSB cable.
Hi all,
After several reboots, I managed to download the firmware, but now it fails in the last phase, after it decompresses the binary files and is supposed to start the actual upgrade.
That's the screen I get:
It happened several times and I can't get past that point.
As for previous answers, I only have one laptop with a single OS, so I can't really try the other suggestions.
Thanks.
Well then yo have to get used with that problem. A Laptop is NOT recommended in these cases.
Why don't you go to a Internet Cafe and try it?
Regards.
why don't you flash with odin? you'll get the same result. and compared to kies - odin will work.
i have the same problems with Kies, for me Odin is not an option `cause i don't want to delete all the stuff in my phone
i get by the upgrade confirmation and then it fails, same error, already tried on my desk pc ( win 7 x86 / sp3 x86) and on my laptop (win 7 x64), same thing, the usb cable is brand new, i have both wifi and wired net connections, nothing works...
maybe someone will figure this **** out for us, is getting really frustrating...
I suffered this error also. After the first time I right-clicked the short-cut for Kies and set the program to Run As Administrator. Tried to update again - worked ok! Good luck!
I cannot see there being an issue with your laptop if it is plugged in and fully charged. Why not Backup your data using titanium, install the update via ODIN, restore data via titanium?, seems like a decent workaround?
For me there were two issues, Issue one was Microsoft .Net. I used Microsoft's removal tool to remove all .NET installations (Uninstall KIES first) then I reinstalled KIES. The second culprit was that I tried other USB cables before I actually used the included Samsung USB-cable, this was THE ONLY cable that worked for me.
My problem which was exactly the same as yours, was solved.
Try another usb port.
Sent from my GT-I9100 using Tapatalk
dstu69 said:
I removed and reinstalled Kies and now it advanced another step, but although the battery is fully charged, it says that the battery needs to be charged
Any suggestions??
Click to expand...
Click to collapse
I got the same problem thought there were only 10-15% battery left. I believe every updating process needs sufficient battery power to complete the process successfully. I just fully charged and tried again and got the thing right.
So I was attempting to load Lollipop onto my Nexus 4, and stupidly was multi-tasking at the time. I wiped the cache, data, the system, dalvik, etc in preparation for loading the new ROM, GAapps, etc. Then when I tried to install them from a zip, I realized the really stupid error I made - I had also wiped the sd card. So now I have no installed ROM, and a completely blank sd card and phone, and of course it is in a bootloop. I've looked all over, and all of the answers seem to be the same - either push the files on, use sideload, or if all else fails, use the Wugfresh toolkit to restore it to factory. Sounds great. Except now windows can't see my phone and I can't copy files to it, push files to it, reach it through adb, etc.
- The phone turns on, and I can reach the bootloader and recovery.
- Windows recognizes that a device is attached, but then tells me there is a problem with the drivers. I have run the full driver install from Wugfresh with the Google drivers, and it says it is fine, but any time I connect the phone, it has an error.
- Through device manager, I've updated drivers to various types (standard MTP, android ADB, etc) and it usually works successfully, but the phone still doesn't show in explorer and adb lists no attached devices.
Any ideas? Thanks for your help.
ahs646 said:
So I was attempting to load Lollipop onto my Nexus 4, and stupidly was multi-tasking at the time. I wiped the cache, data, the system, dalvik, etc in preparation for loading the new ROM, GAapps, etc. Then when I tried to install them from a zip, I realized the really stupid error I made - I had also wiped the sd card. So now I have no installed ROM, and a completely blank sd card and phone, and of course it is in a bootloop. I've looked all over, and all of the answers seem to be the same - either push the files on, use sideload, or if all else fails, use the Wugfresh toolkit to restore it to factory. Sounds great. Except now windows can't see my phone and I can't copy files to it, push files to it, reach it through adb, etc.
- The phone turns on, and I can't reach the bootloader and recovery.
- Windows recognizes that a device is attached, but then tells me there is a problem with the drivers. I have run the full driver install from Wugfresh with the Google drivers, and it says it is fine, but any time I connect the phone, it has an error.
- Through device manager, I've updated drivers to various types (standard MTP, android ADB, etc) and it usually works successfully, but the phone still doesn't show in explorer and adb lists no attached devices.
Any ideas? Thanks for your help.
Click to expand...
Click to collapse
Press and hold Volume + and Volume - with Power toghether.
Stay press until it don't self-reboot itself.
When the logo about bootloader will load up, you can choose what to do :
1 ) Reinstall the stock roms 4.4.4 (https://dl.google.com/dl/android/aosp/occam-ktu84p-factory-b6ac3ad6.tgz)
2) If you still have a modify recovery (CWM or TRWP) you can run it and install zip from sideload. Put the rom zipped you wanna install where did you have adb tools and run "adb sideload <file.zip>" and wait it should be install.
If that dosen't work, you need to use download mode from LG ( for the moment i can't found a guide to do it, check on XDA / Google).
Thanks LainX, but as I said in my original post, my pc can't see the phone, so ADB can't connect and I can't get the new files over to it.
ahs646 said:
Thanks LainX, but as I said in my original post, my pc can't see the phone, so ADB can't connect and I can't get the new files over to it.
Click to expand...
Click to collapse
Did you try download mode ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't think I've seen this "download mode." Where is this - on the phone (in recovery?) or through adb or sideload. The problem seems to be (and I see there are a few others right now with the same problem) that windows sees that the phone is connected, but then there seems to be a driver error such that the device doesn't show up in explorer, and abd and fastboot can't see the phone either.
I've tried different drivers, but haven't systematically gone through every single option so far, which is my next stop. Is any one driver option more failsafe than the others? Also, perhaps related - in the past, any time I've installed the drivers and connected to my phone from my pc, it never seems to "stick." Invariably, I can't access the phone through MTP after a short while (maybe after a reboot?). Recently I found updating the driver to just a Portable Device/Standard MTP USB device driver (i.e. not Google, Samsung, Android, etc) made it work. So now I feel the driver troubleshooting part is even longer and more complicated - go through all of the uninstall/reboot/install with the four Android options, then all of the generic Windows options. So I was just hoping that someone out there might have already cracked this and could point me in the right direction.
Also, in digging through some posts on reddit on related problems, someone said that Windows Media Player is somehow critical for MTP functionality. Is this the case? I had never heard this before. I don't have WMP installed, and in trying to install it, have come up with a Windows error. I'm not clear on the relationship between MTP and ADB/fastboot. Is MTP necessary for the file transfer, or is that not relevant here?
And one final question - to use adb/fastboot, do I need to be in bootloader or in recovery? To install the drivers, do I need to be in either bootloader or recovery?
Thanks so much.
Hi guys - please assist!
My wife's phone started to behave really strange:
- mic level during calls was super-low, but while recording vids: just fine
- started to be extra slow on simple tasks like opening sms messenger etc.
- sometimes I couldn't connect it to PC in order to transfer files
SO... I decided it's time to load new FW. It was also quite surprise because there was 5.0.1 release for her GT-I9506.
Declaimer: I have loaded FW via Odin multiple times for S3, S4, S5 and some other Samsungs so I consider myself quite semi-pro user.
I've downloaded proper software from site, new version of Odin and started the process. After just few seconds some error was displayed on Odin and it crashed. Phone stuck on Downloading phase with progress bar already displayed.
After a while I rebooted it and got this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, I dig a net a bit and I've tried following:
1. I tried to recover my old software with KIESv3 but phone wasn't detected (used XDA tutorial)
2. Tried to reflash again with Odin, but I got "There is no PIT partition" error - I downloaded some pit file for S4(9506) from some Indian site, but I wasn't able to check it
After above I read a net a bit more and wanted to check that pit file I've downloaded and... since then I am not able to connect phone to PC. I contantly get "Unknown device" notification on my Windows. What I have tried:
1. Rebooting multiple times Windows and phone
2. To start a phone in Download and normal (well, not normal now because of the error state but still...) mode multiple times
3. Reinstall USB drivers multiple times
4. Change USB slots - right now I am NOT able to use different cable nor different pc
5. Manually update USB drivers via Device Manager (I extracted drivers from exe file, but I got "up to date drivers" message)
After all it seems I am done. No new ideas whatsoever.
Phone is dead now.
I cannot connect it PC.
Crap.
Any ideas folks? Anyone?
unster said:
Hi guys - please assist!
My wife's phone started to behave really strange:
- mic level during calls was super-low, but while recording vids: just fine
- started to be extra slow on simple tasks like opening sms messenger etc.
- sometimes I couldn't connect it to PC in order to transfer files
SO... I decided it's time to load new FW. It was also quite surprise because there was 5.0.1 release for her GT-I9506.
Declaimer: I have loaded FW via Odin multiple times for S3, S4, S5 and some other Samsungs so I consider myself quite semi-pro user.
I've downloaded proper software from site, new version of Odin and started the process. After just few seconds some error was displayed on Odin and it crashed. Phone stuck on Downloading phase with progress bar already displayed.
After a while I rebooted it and got this screen:
So, I dig a net a bit and I've tried following:
1. I tried to recover my old software with KIESv3 but phone wasn't detected (used XDA tutorial)
2. Tried to reflash again with Odin, but I got "There is no PIT partition" error - I downloaded some pit file for S4(9506) from some Indian site, but I wasn't able to check it
After above I read a net a bit more and wanted to check that pit file I've downloaded and... since then I am not able to connect phone to PC. I contantly get "Unknown device" notification on my Windows. What I have tried:
1. Rebooting multiple times Windows and phone
2. To start a phone in Download and normal (well, not normal now because of the error state but still...) mode multiple times
3. Reinstall USB drivers multiple times
4. Change USB slots - right now I am NOT able to use different cable nor different pc
5. Manually update USB drivers via Device Manager (I extracted drivers from exe file, but I got "up to date drivers" message)
After all it seems I am done. No new ideas whatsoever.
Phone is dead now.
I cannot connect it PC.
Crap.
Any ideas folks? Anyone?
Click to expand...
Click to collapse
You can calm down. Nothing wrong with the phone. This is just something that can happen.
In 99% of the cases this is solved by the following:
- use a different usb port when flashing with Odin
- Use a different usb cable when flashing with Odin.
Oh and for the low volume: Make sure the mic holes are clean. There could be dust in it.
unster said:
1. I tried to recover my old software with KIESv3 but phone wasn't detected (used XDA tutorial)
Click to expand...
Click to collapse
Kies V3 does not support S4. You can try recovery mode with the proper - former - version :
http://www.samsung.com/latin_en/support/usefulsoftware/KIES/
Lennyz1988 said:
- use a different usb port when flashing with Odin
- Use a different usb cable when flashing with Odin.
Click to expand...
Click to collapse
OK it's alive AGAIN! So... It seems that she isn't really taking proper care of her phone as she claims to, because its' charging port seems to be loose a bit. I changed cable, set myself in strange yoga position also changed port and after about 20x added/removed notifications it stopped and allowed me to upload a system.
Thanks!
Required tools:
1. Sp Flash tool mod edit - link removed
2. Drivers mod edit - link removed
3. Firmwares: K50a40mod edit - link removed
Other Varients:mod edit - link removed
4. Windows pc
5. Lenovo K3 Note(ofcorse )
Before doing this, Take Nvram(imei) backup:mod edit - link removed
Download all required files, then unzip.
install drivers, if device not showingin spflash tool(put your pc advanced startup with driver signature enforcement then install drivers)
Stock rom Installation process:
1.Open sp Flash tool.
goto options(located on top left corner)
then select download, in DA DL ALL checksum options tick on both>> USB checksum and Storage checksum(close this window)
2. select scatter-Loading-File from firmware folder.
3. select Download only. (if u select format all+download your imei numbers will be gone)
4. Then click on download button.
5. switch off your mobile, then remove battery and re insert it, then connect
Big right mark will appear after success.
Follow all instructions carefully,
Don't blame me if anything went wrong.
plz download drivers from given link.
use latest spFlashTool.
Press Thanks if my process work.
Thumbs up.:good:
Hi man,
at first I want to thank you, this helped me to unbrick my phone, but ofcourse I did deleted my IMEI, SN and so on.
I know there are few ways how to change it, but none seems to work for me so far. I have the right drivers (v 1.1.13), but not any program is able to connect to my phone except to SP flash tool.
So my question is. Is there any way how to root this version of andriod?
I have already tried Kingroot, RomasteruSU, framaroot and not even MTK Engineering mode was not able to help me change IMEI.
Thanks in advance
M
enterthename said:
Hi man,
at first I want to thank you, this helped me to unbrick my phone, but ofcourse I did deleted my IMEI, SN and so on.
I know there are few ways how to change it, but none seems to work for me so far. I have the right drivers (v 1.1.13), but not any program is able to connect to my phone except to SP flash tool.
So my question is. Is there any way how to root this version of andriod?
I have already tried Kingroot, RomasteruSU, framaroot and not even MTK Engineering mode was not able to help me change IMEI.
Thanks in advance
M
Click to expand...
Click to collapse
https://forum.xda-developers.com/k3-note/help/null-invalid-imei-permanent-fix-100-t3472491
follow this tutorial..
panuganties said:
https://forum.xda-developers.com/k3-note/help/null-invalid-imei-permanent-fix-100-t3472491
follow this tutorial..
Click to expand...
Click to collapse
Hi,
tried to do exactly what is there, but still no luck. I had only APDB before, so I hoped to be successfull this time with MD1_DB.
But what happened. I already had drives and SN writer (2.1504), but downloaded older version (1.1728) anyway. Got into point where phone was connected and in meta mode. The newer version of SN Writer gave me error message pretty fast and calceled meta mode. See SN writers error message img. below.
I have also tried older version, it took bit more time, then it asked me to fill my IMEI for a second time, but ended up with error message again after that. The only thing different was that phone stayed in meta mode. Put second print screen error as well.
Any suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
enterthename said:
Hi,
tried to do exactly what is there, but still no luck. I had only APDB before, so I hoped to be successfull this time with MD1_DB.
But what happened. I already had drives and SN writer (2.1504), but downloaded older version (1.1728) anyway. Got into point where phone was connected and in meta mode. The newer version of SN Writer gave me error message pretty fast and calceled meta mode. See SN writers error message img. below.
I have also tried older version, it took bit more time, then it asked me to fill my IMEI for a second time, but ended up with error message again after that. The only thing different was that phone stayed in meta mode. Put second print screen error as well.
Any suggestions?
Click to expand...
Click to collapse
press and hold volume- and insert usb cable..
thread closed until the download links will be available
If you are getting the error as in the screenshot below, this solution is for you.
1. Download the attachment "Generic Driver.zip" and extract it
2. Click on "Update Driver" in the dialog in the screenshot.
3. Browse my computer for drivers
4. Let me pick from the list of available drivers
5. Show all devices
6. Have Disk
7. Point it to the extracted folder and click OK.
8. You will see 3 new items in the box now Choose "Android bootloader interface" in the list and click next
9. It will show you a warning. Ignore it and press Yes
That's all! Enjoy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oneplus USB drivers were not enough on my win11 pc but your method worked, thanks very much
Hi,
I am facing the same issue, after updating to windows 11 my one plus 7T driver stopped working...i tried all the possible solutions I the forums, from updating driver of Generic driver, Qualcomm drivers, and USB driver...nothing has worked...in fact I saw many members posting to update the android driver in device manager in the other devices tab which solves the issue...many have an android option but on my device there isn't any android option..i don't know what to do..I'm very frustrated and tensed as to what needs to be done...please if any on can help me personally it wud be really great.
anuahmed89 said:
Hi,
I am facing the same issue, after updating to windows 11 my one plus 7T driver stopped working...i tried all the possible solutions I the forums, from updating driver of Generic driver, Qualcomm drivers, and USB driver...nothing has worked...in fact I saw many members posting to update the android driver in device manager in the other devices tab which solves the issue...many have an android option but on my device there isn't any android option..i don't know what to do..I'm very frustrated and tensed as to what needs to be done...please if any on can help me personally it wud be really great.
Click to expand...
Click to collapse
[Guide] Fix Device Not Showing Up In Fastboot Mode (Windows 10/11)
You sir are saint...I've been trying to get fastboot to recognize my OP6T for the last 8 hours. Thank you so much!
forum.xda-developers.com
in my case, the other devices it doesnt show when i connect it with usb and it also doesnt show USB CONNECTED notification on my status bar? it would be really helpful if someone can help with the fix, Thankks and Appreciated.
I just went through the same exercise. However, I did not want to download drivers from unknown source (or even worse - run some *magical* driver fixing executable), right?
I am using Samsung Galaxy Tab A7 Lite and the ADB drivers came from Samsung and adb was working.
However, once I put the tablet in fastboot mode the USB re-enumerated and Samsung drivers didn't cut it!
Inspecting DeviceManager gave me the USB\VID_18D1&PID_4EE0 and Google search shows this is actually a Google VID. The rest is history: Downloaded (signed!) driver from Google (specifically this) and voila - life is good!
I hope this may help others avoiding wizardry with unsigned drivers.
I didn't think I'd get to ask something like this but here I am:
I can't get the phone to be detected while it is bootloader mode to my PC. I always updated and rooted my phone without any issue but with f.15 I can't.
All drivers are fine because I've rooted f.13 like one month ago so i really don't know what to do.
I remember once I had to install "Android Bootloader Interface" but now when I'm in bootloader mode my PC doesn't see the phone. No "unknown android" under window devices manager, nothing.
When the phone is ON I see "ADB Interface" in devices manager, when it's OFF nothing shows up in the list like the PC doesn't see I've plugged my phone.
What am I missing?
Thx in advance
Dieppy said:
I didn't think I'd get to ask something like this but here I am:
I can't get the phone to be detected while it is bootloader mode to my PC. I always updated and rooted my phone without any issue but with f.15 I can't.
All drivers are fine because I've rooted f.13 like one month ago so i really don't know what to do.
I remember once I had to install "Android Bootloader Interface" but now when I'm in bootloader mode my PC doesn't see the phone. No "unknown android" under window devices manager, nothing.
When the phone is ON I see "ADB Interface" in devices manager, when it's OFF nothing shows up in the list like the PC doesn't see I've plugged my phone.
What am I missing?
Thx in advance
Click to expand...
Click to collapse
Not sure if this will help but I would run "usbview" to see what is enumerated. Since the tree is very bid these days with many hubs and USB devices already connected you might first plug-in anything known to the same USB port to see where on the tree it sits. Then plug-in the phone and look at the same spot ("bark at the same tree" ;-) )
If you nave a NIX system "lsusb" will do you similar service. Both are driver independent. Then (if the phone is recognized) get the VID and PID and google what got enumerated and you may end-up with the right driver.
In the case nothing is detected at this low level the only explanation I would have is that the boot doesn't initialize the USB interface on the phone. That would be weird and nasty.
Hey
While trying to install drivers using have disk I encounter a problem. After navigating to the android-usb.inf file I press ok and it rolls back to asking me where is the disk. I tried disabling driver enforcement but to didn't work. It's like windows doesn't want to work. I am using a win 11 copy via parallels on an M1 Mac.