[Q] ruu help - Click General

i want to unroot my htc tattoo and want it back to te original rom, is this possible with the ruu and without the goldcard because i lost my goldcard?? i also was forgotten to tell that i don't know which ruu i need i need a wwe edition but can someone help me to gat the latest
ps if i use an ruu will i lose my recovery because i don't need that anymore

yes with original ruu Rom u will get your warranty back
it will flash your recovery to original HTC
try your needed Rom at shipped-Rom.com / click

guuso50 said:
i want to unroot my htc tattoo and want it back to te original rom, is this possible with the ruu and without the goldcard because i lost my goldcard?? i also was forgotten to tell that i don't know which ruu i need i need a wwe edition but can someone help me to gat the latest
ps if i use an ruu will i lose my recovery because i don't need that anymore
Click to expand...
Click to collapse
If you need GoldCard to install the ruu,if you lost is as simple as re-create.

ok and which ruu do i need tu use?? because there are a lot to choose from

Related

I need help...

I heve a big problem...
When I unlock my SPV M650 by http://www.imei-check.co.uk/ i thing that it is unlocking CIDlock...
And when I upgrading to WM6 but I seen error... And i did reset and now I see only screen with Orange logop and OS information...
Plese help me
//sory to my english but it is wery low!//
you need to find your original rom, reflash that, then use USPL and unlock it, that route, then reflash the rom you want to use.
[email protected] said:
you need to find your original rom, reflash that, then use USPL and unlock it, that route, then reflash the rom you want to use.
Click to expand...
Click to collapse
Cen you give me instrucion..?
And do you thing that on orginal CD, a find ROM??

herald bricked,seems to be no way out....

using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.
pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.
okay thats good
crappy stuff, bricking
itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?
didn't think it was possible to brick a herald. def gonna b more carefull now
yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way
wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone

Help to send back my polaris....

hello,
i will send back my polaris to htc for repair but i have installed another rom on my device. do i need to install back the original rom?. I bought my device in norway , can i install original swedish rom and spl or do i have to install the norwegian rom, where can i find the original spl and rom?
have a look on this post:
http://forum.xda-developers.com/showthread.php?t=381600
and don't forget to thank fktsndr...
you'll find original swedish dumped rom, original spl...
after restore, you can send it to htc....
cheers!
do i need to install first hard spl olinex and efter riginal swedish rom and after that original spl???
spamb said:
do i need to install first hard spl olinex and efter riginal swedish rom and after that original spl???
Click to expand...
Click to collapse
I think you have hardspl on your machine, because you have not the original rom
So, just install the original rom, after the original spl.
my phone have from beggining norwegian original rom can i flash original dumped swedish rom and after hard spl , can them see that???
sorry my bad english
spamb said:
my phone have from beggining norwegian original rom can i flash original dumped swedish rom and after hard spl , can them see that???
sorry my bad english
Click to expand...
Click to collapse
I suggest use hard-spl if you want to install different rom than shipped with your pda.
i mean, my phone was shipeed with norwegian rom, i live now in sweden and have install original swedish rom and original hard spl to device , do i need to flash back to norwegian rom or can i sent to repair with swedsish rom, cant htc see that???
spamb said:
i mean, my phone was shipeed with norwegian rom, i live now in sweden and have install original swedish rom and original hard spl to device , do i need to flash back to norwegian rom or can i sent to repair with swedsish rom, cant htc see that???
Click to expand...
Click to collapse
Sorry but I do not understand
There is NO original hard-spl...There is hard-spl or and original spl.
If you want to sent it back to HTC you have to install shipped rom and spl.
If you want to install NOT the shipped rom, you sould install hard-spl first.
thanks all for the help. i get phone back today from repair ,they change mainboard and phone is okay now, befora i get problem with bt,camera, storage card and microphone

my htc tytn does not detect any sim !

hello,
my htc tytn does not detect any sim I don't know if it's a hardware or software problem, but when I go on device informaion that displays:
radio version: NONE
protocol version: NONE
what's you think?
r u having a bad flash? what r doing actually?
try to re-install the SHIPPED STOCK ROM. It may fix but may not also.
Good luck...
ultramag69 said:
try to re-install the SHIPPED STOCK ROM. It may fix but may not also.
Good luck...
Click to expand...
Click to collapse
how to re-install SHIPPED STOCK ROM?
connect with activesync and click on the RUU_Wrapper.exe file.
You need to find the stock rom first. Flash the shipped stock rom. It has to be the shipped rom or upgraded wm06 shipped rom so the cid will match and it MIGHT reflash the radio rom successfully. If you try ANY stock rom it WON't work.
Cheers...
Make sure you Hard SPL your Hermes after. It makes it easier to fix if something goes wrong with a flash , I'd suggest trying to fix first then install Hard SPL V7.
ultramag69 said:
connect with activesync and click on the RUU_Wrapper.exe file.
You need to find the stock rom first. Flash the shipped stock rom. It has to be the shipped rom or upgraded wm06 shipped rom so the cid will match and it MIGHT reflash the radio rom successfully. If you try ANY stock rom it WON't work.
Cheers...
Make sure you Hard SPL your Hermes after. It makes it easier to fix if something goes wrong with a flash , I'd suggest trying to fix first then install Hard SPL V7.
Click to expand...
Click to collapse
I can not install any wm06 shipped Roms, the download stops at 11% to 12% or 13%, I even installed (HTC_Hermes_SIM_CID_Unlock_v3a) but downloading continues to stop I understand nothing !
Please help me, I do not sleep more than anything to retrieve my radio!
Sorry mate, if you can't flash the shipped rom it means the radio has been corrupted and so can't be used as a phone anymore. Flash Hard SPL V7 then any cooked rom of your choice to use as a PDA but the phone can't be recovered...
ultramag69 said:
Sorry mate, if you can't flash the shipped rom it means the radio has been corrupted and so can't be used as a phone anymore. Flash Hard SPL V7 then any cooked rom of your choice to use as a PDA but the phone can't be recovered...
Click to expand...
Click to collapse
First, thank you for your interest in my problem
and how can I fix my rom radio now is that corrupted? for use as a phone

HELP required urgently !!!

Hello anyone,
i just have done some bull****, i guess...
yesterday evening i copyed "EnterBootloader.exe" via USB to my VPA compact 4 & run it from over there. meanwhile this step i was connected to USB (maybe the fault [?])! the SIM-card was inside the device, but no SD-Card.
next a whitescreen popped up and i waited 1.5min... i couldn't wait any longer, so i pressed on-/off-button...
nothing happened if i press the on-/off-button again, nothing happens! no LED is blinking any longer, even i connect it to 230V.
my situatin is really uncomfortable to me - please help me to get back the manufacturers settings!
thx in advise
Beli
why did you copy "EnterBootloader.exe" to your device and run it? What where you trying to do?
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Belisario said:
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Click to expand...
Click to collapse
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
ace10134 said:
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
Click to expand...
Click to collapse
It was not my intention to flash any ROM...
Thanks for the advice, but for now i'm unable to flash any provider ROM, because i don't have any!
...i guess it should be a GERMAN vodafone ROM, because that was the last runnig stable.
now a few questions, which the WIKI was unable to answer:
where to get this unknown ROM?
over here?
how to install (guide/tut would be nice...)?
what about the two different "goldcard"-methods?
Elf-Goldcard
Herald-Goldcard
what about the so-called "Unbricker"?
over here
thewingster.com is the best place. check it out
Brandonii said:
thewingster.com is the best place. check it out
Click to expand...
Click to collapse
Well it's not going to solve his problem.
I wish my website could fix his phone in an instant, but it can't He'll have to do the Goldcard, most likely
So, if the Goldcard is the best solution for my Herald, i have to try it... otherwise there is no way out.
BUT:
The website "hides" a link to the official ROM of T-Mobile Wing (US).
I've modified the link, but i don't know if i'm at the right place over HERE.
Maybe i should try it, but they need the so-called IMEI... i don't want to offer it to them, only if it would solve my problem!
As far as i know, i need to download the official ROM of Vodafone Germany with SPL-version 1.09.
If any of you has this ROM or something that could help my to find it, please post a "hint" for me where to get
Thanks in advance
Beli

Categories

Resources