TV out - Galaxy S I9000 General

I'm using TV out from Galaxy s.
All working well.
But when i screen off,Signal also stopped.
Works well when screen on.
But it drains the battery.
Any way to solve this?

is normal
just set the phone to be always on

svprm said:
I'm using TV out from Galaxy s.
All working well.
But when i screen off,Signal also stopped.
Works well when screen on.
But it drains the battery.
Any way to solve this?
Click to expand...
Click to collapse
What cable do you use?

Not original cable.
I want TV out to work when screen is off.
How to do?
Sent from my HTC Desire using XDA App

As far as I'm aware, the TV out comes from the screen feed and the audio feed. Therefore, if you do not have any feed to screen there is no feed to TV from the jack socket.
@borchgrevink,
The cable to use is a Nokia TV out cable, can be got in the UK from the bay for less than £2.00

Like this: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190466684348#ht_2626wt_1139

Mvideoplayer app developer responded my email when I asked him if this would be possible:
"...Made a test build with that feature which I tested on my Nexus One with 2.2. It didn't work, when I sat the brightness to 0 the playback stopped and the phone went to sleep (I didn't know that), I guess this is how it works and that means it's not possible. There is no other way in the API to just turn of the screen. It's not allowed. "
Bummer...
I've tried the Screen Filter widget, but it shades the TV screen a well, so, the only way to spend LESS battery is to set the brightness to minimum before switching to your player of choice (in Mvideoplayer you can easily set it via a slider in the GUI).
Sent from my GT-I9000 using XDA App

Related

Some NEWBIE question Please help!

I just picked up the verizon tab. Need a little newbie help. Having a few issues
1- How do i prevent battery drain when the unit is off at night but not on a charger it seems i lost battery life
2- How do i know what data source is being used when 3g or wifi both icons are showing on at the same time. if i just want use wifi how do i turn off the 3g radio?
3- anyone get allshare to work? whats the best way to stream stuff from the pc to the gtab?
4- when the battery was at 10% i couldnt adjust the screen brightness anymore it was dark. is that normal?
5-Any battery life tips? get the most out of the battery?
thanks!!!!
sillyrabbitt123 said:
I just picked up the verizon tab. Need a little newbie help. Having a few issues
1- How do i prevent battery drain when the unit is off at night but not on a charger it seems i lost battery life
2- How do i know what data source is being used when 3g or wifi both icons are showing on at the same time. if i just want use wifi how do i turn off the 3g radio?
3- anyone get allshare to work? whats the best way to stream stuff from the pc to the gtab?
4- when the battery was at 10% i couldnt adjust the screen brightness anymore it was dark. is that normal?
5-Any battery life tips? get the most out of the battery?
thanks!!!!
Click to expand...
Click to collapse
1 - battery drain in standby shouldn't be significant but you can reduce it by turning off radios you don't need and/or reducing the update interval of any apps you have checking in the background.
2 - I'm not sure what's happening here, usually the wifi logo overwrites the 3g one so it is obvious which one is in use (at least it does on my UK SGT, might be different for CDMA). Either way switching on and off the various radios is easily done from the notification area, just swipe down from the top of the screen to show toggles for wifi, bt, gps, silent mode & orientation lock.
Edit: oops, I miss remembered, I don't know of an easy way to switch the mobile radio.
3 - I had a bit of a play with allshare day one but haven't had time to give it a proper workout yet.
4 - I haven't had mine run down that far but it sounds like a sensible power saving measure, better to see it dim for a while than bright for two minutes!
5 - the screen auto adjust in the display settings seems to help a lot. Other than that I've found the battery life to be very good for the most part. I tend to only switch on wifi if I have a big download to do so that might help in my case.
Welcome by the way, hope you enjoy the tab!
Bill
Sent from my GT-P1000 using XDA App
obzbdc said:
Edit: oops, I miss remembered, I don't know of an easy way to switch the mobile radio.
Click to expand...
Click to collapse
Hold the power button for a couple of seconds, you can toggle mobile data from the popup menu.
Sent from my Galaxy Tab
huggsy said:
Hold the power button for a couple of seconds, you can toggle mobile data from the popup menu.
Sent from my Galaxy Tab
Click to expand...
Click to collapse
I just found that myself and headed back here only to have been beaten to the punch!
Sent from my GT-P1000 using XDA App
obzbdc said:
1 - battery drain in standby shouldn't be significant but you can reduce it by turning off radios you don't need and/or reducing the update interval of any apps you have checking in the background.
2 - I'm not sure what's happening here, usually the wifi logo overwrites the 3g one so it is obvious which one is in use (at least it does on my UK SGT, might be different for CDMA). Either way switching on and off the various radios is easily done from the notification area, just swipe down from the top of the screen to show toggles for wifi, bt, gps, silent mode & orientation lock.
Edit: oops, I miss remembered, I don't know of an easy way to switch the mobile radio.
3 - I had a bit of a play with allshare day one but haven't had time to give it a proper workout yet.
4 - I haven't had mine run down that far but it sounds like a sensible power saving measure, better to see it dim for a while than bright for two minutes!
5 - the screen auto adjust in the display settings seems to help a lot. Other than that I've found the battery life to be very good for the most part. I tend to only switch on wifi if I have a big download to do so that might help in my case.
Welcome by the way, hope you enjoy the tab!
Bill
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
THANKS Bill! Appreciate the info/advice!
I guess I am getting confused between the 3g/ the strength bars. So if it doesnt say 3g but just shows signal strength then its probably using wifi?
Does anyone know if the SGT defaults to wifi first then to 3g? Just curious.
huggsy said:
Hold the power button for a couple of seconds, you can toggle mobile data from the popup menu.
Sent from my Galaxy Tab
Click to expand...
Click to collapse
THANKS. If you are home do you leave the 3g off? and just work off of you wifi connection? or do you leave them both running at the same time?
thanks
sillyrabbitt123 said:
THANKS. If you are home do you leave the 3g off? and just work off of you wifi connection? or do you leave them both running at the same time?
thanks
Click to expand...
Click to collapse
When wifi is on it turns 3g off. I use an app called tasker to save my battery. I have it set to turn wifi/3g off when the screen turns off, and if I place it face down it sets the device into airplane mode, left in this state the battery drains very slow when not in use. Tasker is not the cheapest app but you are only limited by your imagination what you can do with it.
Sent from my Galaxy Tab
Thanks for the info. I will check it out. Much appreciated!
Anyone else know how to use allshare? According to samsung you cannot stream from your pc to the tablet is this correct?
i am actually trying to do both stream from the pc to the tab and then seperately stream from the tab to the tv or blu ray player and or pc and nothing works any which way? not sure how to get this to work?
thanks
AllShare is an app that you can use to connect to other Samsung AllShare enabled divices like TV's. I removed the app. It is completely useless. (It would be so nice if there was an app by which I could connect to my homenetwork.)
Mado007 said:
AllShare is an app that you can use to connect to other Samsung AllShare enabled divices like TV's. I removed the app. It is completely useless. (It would be so nice if there was an app by which I could connect to my homenetwork.)
Click to expand...
Click to collapse
Not quite correct! It allows you to stream from/to other DLNA devices which includes some Samsung TV's, but plenty of other devices too.
For example, I use to it to stream from/to my PCs with Media Center.
Regards,
Dave
Mado007 said:
AllShare is an app that you can use to connect to other Samsung AllShare enabled divices like TV's. I removed the app. It is completely useless. (It would be so nice if there was an app by which I could connect to my homenetwork.)
Click to expand...
Click to collapse
I have been using allshare with my ps3. On the tab open allshare and select my device as a source. do not select a playback device. Then on the ps3 go to music / video /photo and select the tab
Sent from my GT-P1000 using XDA App
How do i connect eith all share to my pc? When i tried it only worked one way, from my Tab to the pc (and i like the other way around).
Another question: I removed OCLF can i flah a new rom (is it safe?) Thanks for answering.
Sent from my GT-P1000 using XDA App

LiveView

Hi all. I am planning to buy the Sony Ericsson LiveView as it is very cheap. I will not mainly use it with my phone. I will use it as a watch and calendar so is the clock and calendar good (with the latest update and without connecting it to the phone)? I will usw it sometimes with the phone for twitter, WhatsApp and calls. I have a Sony Xperia U so will it be good as mine is not an Ericsson? I will also play music. Please guide me mates as this is my first smartwatch.... Thanks in advance
Sent from my ST25i using Tapatalk 2
Yeah is there a gps abd sports tracker in the watch? Just asking.
Sent from my ST25i using Tapatalk 2
Hey I've got LiveView so I can tell you some about it. Price is very low but quality is very low too. Twiter, Facebook is not working (you can't log in). Music control works good. Call/SMS notifications works nice. I haven't any connections problem with Xperia x8. There are some sports trackers for example: SportyPal PRO or Microtracks (app for Google's My Tracks).
(with the latest update and without connecting it to the phone)
Click to expand...
Click to collapse
Hymm It can't even display time without connecting ;p. If you connect and disconnect it works only as a clock and showing right time (no any other functions) but if you just turn on it without connecting it shows only 0:00.
iks8 said:
Hey I've got LiveView so I can tell you some about it. Price is very low but quality is very low too. Twiter, Facebook is not working (you can't log in). Music control works good. Call/SMS notifications works nice. I haven't any connections problem with Xperia x8. There are some sports trackers for example: SportyPal PRO or Microtracks (app for Google's My Tracks).
Hymm It can't even display time without connecting ;p. If you connect and disconnect it works only as a clock and showing right time (no any other functions) but if you just turn on it without connecting it shows only 0:00.
Click to expand...
Click to collapse
Ok thanks. But can it show a map? Small one? And did it slip of the wrist strap while as a watch? Can i view a calendar mate? Lastly, are there WhatsApp notifications??
Sent from my ST25i using Tapatalk 2
I'm using microtracks and it shows distance, speed, time etc. I don't think there is usable plugin which shows map. Calendar: there is a calendar plugin but it in not working for me. WhatsApp: I have never used it but there is something about this app https://play.google.com/store/apps/...icsson.extras.liveview.plugins.customnotifier here http://forum.xda-developers.com/showpost.php?p=24009063&postcount=17
And did it slip of the wrist strap while as a watch?
Click to expand...
Click to collapse
Not much but this strap isn't the best but you can use any watch's strap which width is 20 mm.
Thanks, I'm satisfied...
Thread closed!
Sent from my ST25i using Tapatalk 2
Does it have a speaker for notifications ? ?? ??
Sent from my ST25i using Tapatalk 2
Nope, it has only vibrations and diode.
iks8 said:
Nope, it has only vibrations and diode.
Click to expand...
Click to collapse
Diode??
Sent from my ST25i using Tapatalk 2
Oh I mean LED, you know, It's that small light . Sorry I used google translate xD.
Ok thanks!
Sent from my ST25i using Tapatalk 2
where i can find usefull links to make my LiveView more exciting
btw, im using LT18i, UltimateHD 3.0.2 ROM + Vengeance kernel
Thy
More exciting? If you want to find plugins use live ware menager https://play.google.com/store/apps/...NvbS5zb255ZXJpY3Nzb24uZXh0cmFzLmxpdmV3YXJlIl0..
Is there any way to use it as a mouse
I need to control my computer through bluetooth, so I wonder if there is any way to use this watch as a bluetooth mouse. If not, please advice me about it. Thanks in advance.
Can you turn the watch's bluetooth off, and continue using it as a watch?
Not being able to do so is a dealbreaker for me, it's far cheaper than the pebble
csmiler said:
Can you turn the watch's bluetooth off, and continue using it as a watch?
Not being able to do so is a dealbreaker for me, it's far cheaper than the pebble
Click to expand...
Click to collapse
Sort of. When you connect to your phone with the LiveView, and then disconnect, the time will still be displayed on the LiveView. However, once you restart the LiveView, the time will disappear until the next time you reconnect with your phone
Sent from my LT29i using xda premium
Thanks!
No setting to turn BT off? Seems like it'd drain the battery quite a bit if it has it on all the time.
csmiler said:
Thanks!
No setting to turn BT off? Seems like it'd drain the battery quite a bit if it has it on all the time.
Click to expand...
Click to collapse
Not that I'm aware of
Sent from my LT29i using xda premium
Could use some advice.
This thing has a TINY battery and doesn't use that much power.
As a watch mode it's in the light all the time.
ebay has:
http://www.ebay.com/itm/PowerFilm-M...162?pt=LH_DefaultDomain_0&hash=item4172b2bb12
http://www.ebay.com/itm/PowerFilm-F...00918136469?pt=UK_Gadgets&hash=item2ec7a77695
and my favorite
http://www.ebay.com/itm/Thin-Film-F...489?pt=LH_DefaultDomain_0&hash=item3a81313771
for dirt cheap that puts out decent charge ... anyone have any ideas how to fashion one of these into a watchstrap?
Perhaps solder on a male micro usb that will couple to liveview on that side and then a regular watch pin on the other side.
Wouldn't this generate enough energy to never have to plug in and allow unlimited use?
50ma * 8hours a day??? for a 100mah battery?
Am I missing something here?
The only issue I see is the voltage... usb needs 5V +/- .25ish?
Would one use a voltage regulator?
Any input greatly appreciated. I'm more software than EE.
Thanks,
Frank
willfck4beer said:
Could use some advice.
This thing has a TINY battery and doesn't use that much power.
As a watch mode it's in the light all the time.
ebay has:
http://www.ebay.com/itm/PowerFilm-M...162?pt=LH_DefaultDomain_0&hash=item4172b2bb12
http://www.ebay.com/itm/PowerFilm-F...00918136469?pt=UK_Gadgets&hash=item2ec7a77695
and my favorite
http://www.ebay.com/itm/Thin-Film-F...489?pt=LH_DefaultDomain_0&hash=item3a81313771
for dirt cheap that puts out decent charge ... anyone have any ideas how to fashion one of these into a watchstrap?
Perhaps solder on a male micro usb that will couple to liveview on that side and then a regular watch pin on the other side.
Wouldn't this generate enough energy to never have to plug in and allow unlimited use?
50ma * 8hours a day??? for a 100mah battery?
Am I missing something here?
The only issue I see is the voltage... usb needs 5V +/- .25ish?
Would one use a voltage regulator?
Any input greatly appreciated. I'm more software than EE.
Thanks,
Frank
Click to expand...
Click to collapse
None of those will work. 5V or nothing.
I have tried a few of those on other USB powered devices and they never work. You would need two of them hooked up in series and that will give you 6V low amperage. Once you hook it to the device the voltage will essentially drop to 5.5V which is a outside the safe margin but a small chance of working.
Good luck.

Sleep on power removed

I'm planning on installing my Flo Nexus in my car to replace the outdated stock navigation system. I was quite interested in Timur's USB ROM but it doesn't support Flo and doesn't look like he'll be adding it after cancelling the indiegogo campaign he started to fund it.
I've spent some time searching and looking at the different kernels and roms available, and for now am running ElementalX 1.7beta with an older CM nightly.
I think this meets most of my needs, but I have one little nitpick - is there anything out there that separates the "Wake on plug" action into two separate functions? I'd like the screen to wake up when power is applied, but not when power is removed as this is going to leave the screen on when I get out of the vehicle. Ideally when power is removed I'd like it to go to deep sleep immediately.
Thanks.
I've never used the app Tasker. But isn't that what people use when trying to accomplish that?
Sent from my Nexus 7 using XDA Premium HD app
makers_mark said:
I've never used the app Tasker. But isn't that what people use when trying to accomplish that?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I've used tasker for different things, but have found it unreliable when it came to power events, at least in the past. I'll definitely give it a shot and see how it works for this scenario. Thanks for reminding me.
Any other suggestions out there in case Tasker doesn't do the trick, or other votes for Tasker?
I got an app called "Caffine" which keeps the screen on while plugged in/charging, and when I turn the car off I set the backlight to 15 seconds, that way it sleeps after 15 seconds. Works great.
If you don't mind me asking, how are you installing the tablet into your car?
Cl8rs said:
I got an app called "Caffine" which keeps the screen on while plugged in/charging, and when I turn the car off I set the backlight to 15 seconds, that way it sleeps after 15 seconds. Works great.
If you don't mind me asking, how are you installing the tablet into your car?
Click to expand...
Click to collapse
I have an '06 Acura TL with OEM Navi system. I'm having a car audio shop relocate the navi screen (as it's tied to climate functions but I don't need to see it) and they're putting the tablet in its place. The goal is to have things looking stock while be far from it.
r00ler said:
I have an '06 Acura TL with OEM Navi system. I'm having a car audio shop relocate the navi screen (as it's tied to climate functions but I don't need to see it) and they're putting the tablet in its place. The goal is to have things looking stock while be far from it.
Click to expand...
Click to collapse
How much are they charging you? Is it a common audio shop?
Cl8rs said:
How much are they charging you? Is it a common audio shop?
Click to expand...
Click to collapse
It's part of a complete stereo install I'm doing, and it's not cheap although it's not rip-off expensive either. I chose them because they are capable of doing good fabrication work and are going to need to put something together to hold the tablet securely in place behind the stock bezel.
Just wanted to update for people to know what I did. Tasker was the way to go to get exactly what I want, but I needed to add the Secure Settings plugin as well. With that plugin I was able to immediately turn on the screen when power is applied, as well as shut off the screen immediately when power is removed.
I've also attached other bits to these profiles, such as adjusting the CPU clock and disabling wifi/bluetooth when the screen is off. At this point I'm losing less than 10% battery for 24 hours of sleep, which is pretty good although I'd like to see if I can find any improvements. We'll see!

[Q] Has anyone used Screen Standby #root with G2?

Has anyone modified this app to work with the G2?
http://forum.xda-developers.com/showthread.php?t=1934495
I was wondering so I could use my phone in my car with ARLiberator or ARUnchained and have the screen turn off on my phone rather than just have to leave it face down all the time.
Thanks!
I have been using it on the sprint model. I did have an issue where after the screen turned off that video would stutter badly and.the phone.would freeze up badly. However after soing some research I found that if you go into settings >> screen off methods and uncheck the persistant blank frames setting that it fixes the problem. Its working well.
I use it for slimport connection and when streaming via miracast or dlna also. Saves battery quite a bit. Unfortunately it is now an open source.project and there is little or no development unless someone decides to do it. So I do not expect the app to work forever.
Is there any other apps like this that do work on a LG G2? I'd like to turn off my screen completely when using Slimport adapter to external display.

Turn off the Nexus Player?

Hi,
How do you turn off the Nexus player? I can't find an option for it, I had to just switch off the power instead.
Any ideas?
Thanks.
kaznad said:
Hi,
How do you turn off the Nexus player? I can't find an option for it, I had to just switch off the power instead.
Any ideas?
Thanks.
Click to expand...
Click to collapse
There is no "off" on the Nexus Player, just like the Chromecast. It goes into a low powered standby mode after a few minutes, waiting for any Google Cast connections to wake it up and start playing (with HDMI-CEC enabled on TV or receiver, it'll automatically turn on, switch inputs, etc to start playing your cast immediately).
kaznad said:
Hi,
How do you turn off the Nexus player? I can't find an option for it, I had to just switch off the power instead.
Any ideas?
Thanks.
Click to expand...
Click to collapse
Like @Elrondolio already mentioned, there is no "Power Off" feature (which I HATE!!!). However, you could look for some kind of switch that you could attach to the power adapter cord so that you don't have to unplug every time that you want to turn the device off...something like this: http://www.adafruit.com/products/1125 (though, I have no idea whether or not that specific cord actually will work...I'm just presenting the concept). I've done this with my raspberry pi and it's awesome!
Another option would be to plug the player into an outlet that is controlled by a light switch (which would be much nicer than the cord IMO).
bsara said:
Like @Elrondolio already mentioned, there is no "Power Off" feature (which I HATE!!!).
Click to expand...
Click to collapse
I'm truly not trying to be confrontational here, simply curious: why do you hate that it's always on (in low power mode) so much?
To me, I see it no different than another phone or tablet in my home as it has nearly the exact same innards... all of my family's phones and tablets are on 24/7 as well, either on battery or charging on the mains. Having to boot up the box for a quick cast to show a quick video/trailer/etc to the family or start playing some music would be an inconvenience, I'd think, as having to wait for a receiver to boot its OS every time would be.
Again, simply curious as to your reasoning is all. Thanks!
Thanks everyone for your explanation.
I also have a Chromecast installed on my TV and I don't have any problem with it being always on WHEN my TV is turned on. However for the nexus player it will be truly always on unless you switch off the main.
I just got my nexus player yesterday so I dunno if it will be warm/hot if it's always on even when not in use. Anyway if it's not warm/hot if not in use then I've got no problem with it.
Thanks again everyone!
I've had my lean back launcher crash a few times, losing recommendations. It would be nice to have reboot
volwrath said:
I've had my lean back launcher crash a few times, losing recommendations. It would be nice to have reboot
Click to expand...
Click to collapse
agreed, a reboot option would be nice. a 3rd party app can achieve this with root. such as: power menu
Elrondolio said:
I'm truly not trying to be confrontational here, simply curious: why do you hate that it's always on (in low power mode) so much?
To me, I see it no different than another phone or tablet in my home as it has nearly the exact same innards... all of my family's phones and tablets are on 24/7 as well, either on battery or charging on the mains. Having to boot up the box for a quick cast to show a quick video/trailer/etc to the family or start playing some music would be an inconvenience, I'd think, as having to wait for a receiver to boot its OS every time would be.
Again, simply curious as to your reasoning is all. Thanks!
Click to expand...
Click to collapse
No worries about being confrontational, everybody has there own likes/dislikes...nothing wrong with that. Part of it is the made desire for efficiency that I have...why have something consuming power and bandwidth when it's not being used? Also, the amount of time that I and my family are using it is far less than the time that we aren't using it, if I was using it all day, I might not mind so much. Also, it's nice to do a reboot without unplugging the device, especially since I want to put it in a cabinet that is somewhat of a tight space. But, probably one of the biggest things that comes to my mind is connection to the internet on a 24/7 basis really bugs me. I know that my phone and my wife's phone is always connected...but it needs to be to notify me of things, my TV isn't notifying me of anything, I just want to use it when I want some good old couch potato entertainment, so why take up my bandwidth (I assume that it does some kind of check) and use any amount of power (which I do pay for, no matter how little the power usage is) when it isn't needed?
Personally, I believe that the following principle (highly advocated by Google) should have been followed: "Decide for me but let me have the final say" (http://developer.android.com/design/get-started/principles.html#decide-for-me). In other words, give the option to leave it on all the time for those that want it...but allow for powering off for those who don't. That way, everybody is happy.
I know this isn't an on-device fix, but if you're seriously concerned about your TV accessories only being on when the TV is on, there are many power strips out there that have a "master" outlet that toggles power to the rest of the outlets based on when the master device is on. So turning your TV on and off will switch power to the rest of your devices.
A reboot option would be nice. As for turning the NP off, I am using a TRIPP LITE TLP76MSG Eco Green Switched 7 Outlet Conserve Energy Surge Protector from Amazon.
Just an update, I found that when not in use the player is cool to the touch. As such I believe it goes into a low power/power saving mode. I have no issues with it being always on now. Way to go, google/asus. :good:
Confirmation of sleep mode
My nexus player's light is always on. Does anyone know if this means the unit is on or in sleep mode after the 30 minutes of inactivity? I have set it to 30 minutes and daydream does come on. Based on the manual, when the light is on the unit is on.
Thanks
https://support.google.com/androidtv/answer/6123074?hl=en&ref_topic=6121506
I think the light just means it has power, so it can be in sleep mode even when the light is on.
This was my main concern yesterday.
(I had since a week ago the Nexus Player but due my Internet provider's laziness, it was not until last night I could FINALLY setup my account and the device).
I noticed the DayDream options but I agree that the same OS needs an reboot option.
Mine doesn't switch back on when the TV is turned on again. Just a black screen and doesn't respond to pressing buttons on the remote.
wotandsdwys said:
Mine doesn't switch back on when the TV is turned on again. Just a black screen and doesn't respond to pressing buttons on the remote.
Click to expand...
Click to collapse
I recently brought a Nexus Player, I am having the same problem like you. Is this a problem with the software?
Understand that you can't power off the Nexus Player, but will it damage the internal components of the player (flash drive, etc) in the long run if you just simply cut off the power supply, which is apparently the only way to off the device?
Blank screen
xblues said:
I recently brought a Nexus Player, I am having the same problem like you. Is this a problem with the software?
Click to expand...
Click to collapse
Me too.. Screen is blank and will not come back to the launcher when a remote button is pressed. Does anyone know why? is it a hardware fault? Thanks in advance
shabba007 said:
Me too.. Screen is blank and will not come back to the launcher when a remote button is pressed. Does anyone know why? is it a hardware fault? Thanks in advance
Click to expand...
Click to collapse
I actually got it exchanged at the store. The problem disappeared with the new one (also using 5.1.1). So get a replacement!
kaznad said:
Hi,
How do you turn off the Nexus player? I can't find an option for it, I had to just switch off the power instead.
Any ideas?
Thanks.
Click to expand...
Click to collapse
yeah i can't find it too. i switch off instead power off

Categories

Resources