[Q] eXpansys unlocked Focus. Data not fully working - Focus General

G'day all XDA'ers. I got my phone from eXpansys unlocked just a week or so ago. This is not my first Windows phone but my first WP7 device for sure. I have been using the forums and the wiki to get my Focus up and rocking.
All is going well except full data service. No i know it sounds odd but data service is "kinda" working. By that i mean that i can get my corporate Exchange email ok and for some reason m.cnn.com will come in ok. For a local newspaper site it will render about 1/4 of the main page and thats it and Fark i will get a logo. All other sites fail in either stock IE or Browser+. Its trying.......just not succeeding. Looks like GMail and Hotmail can't sync over this borked celldata connection either - company Exchange only.
Last phone was a Blackberry and verified with the carrier that no flags or anything needed to be changed on their end. I verified with the *#7465625# that all locks are disabled. Most annoying is that i popped my SIM into my gf's iPhone and everything works fine.....and it was unlocked and she is with a different carrier.
I put on Samsung's Network Profile tool but i don't have any other network profiles to select. Auto config is on.
Not sure where else to look. Calls work, SMS works, MMS isn't supported on my carrier so didn't test. I really thought i had it figured out until the iPhone test worked.
For reference carrier is M3 Wireless Bermuda but to keep it interesting my liveID is registered to Canada.
Thoughts?

Also i got the Device Info app from Marketplace and see i am getting an IP and it is from my carrier's range. And though i should add that APN settings have been triple checked.
The Network Selection type is manual with carrier network selected and roaming is enabled.
And as an update the Hotmail did eventually update.......no word on the GMail

Little more detail
This might be a carrier limitation......maybe. I noticed that when i popped my gf's SIM into my phone i see a Digicel network profile now in Samsung's tool. Even after swapping out my M3 SIM the Digicel profile is still there - no M3 profile loaded/created. I need to get the data service on my gf's phone reactivated for a test but there might be something here.
Again....a small handful of sites work and Exchange and Hotmail works. I can't see the rhyme or reason of it. Google.com mostly loads (no logo) but detects my gmail account....but m.google.com won't work. Mobile version of bermudasun works but not other paper. m.cnn.com is groovy but not m.youtube.com.
will post back with more detail. Wish i could see what the carrier proxy or dns information was......

Related

This could be a temporary problem or your SIM card may not be provisioned for data se

Hello
Just switched from symbian to android and now I really want to get some apps installed to my phone.
When I click the market app, I need to sign in with my gmail account.
But when I try this it gives me the message.
"Can't establish a reliable data connection to the server.
This could be a temporary problem or your SIM card may not be provisioned for data services"
The part with temporary I don't believe and the SIM card part I know is wrong as I can surf the net, sync my exchange company mail etc.
I have tried with WIFI also, but same message coming.
Living in Norway, using Netcom as carrier.
Does anybody have any clue on how I can get past this and log into market?
Best regards
TommyE
Remove the sim. Wifi should still work. Tested here fine, when I had a Hero. This will not be a data provisioning issue.
I can also confirm this. I didn't initially have a Google account, and when I tried to create one via the handset I got the data provisioning error. I master reset the phone, created a Google account online with my PC, and set the Google login details in the initial setup of the phone. After this I had no problems.
Good luck.
ditto, I didn't set up android account when I went through initial setup, and it wouldn't work later. Had to factory reset and do it during initial setup (it was happy enough using my wifi for this)
same problem on HTC Magic =(
I have HTC Magic, i purchased it several days ago and it was working just fine. Then i found out that i can't replace the google account from previous owner and decided to hard-reset.
After that I'm getting this (I'm on T-mobile USA and I have just internet for 5.99):
"This could be a temporary problem or your sim card may not be provisioned for data services, if it continues, call customer care"
Called customer care, they said it won't work without 24.99 data plan, but it WAS working before! I tried changing APN from epc.tmobile.com to wap.voicestream.com but it didn't help =(
Phone is unlocked. Without signin in to google I can't even use phone features.
Any ideas?
Thanks!
I am having this issue now. I bought my Hero last week and set it up with my China Mobile SIM card. Then I decided to switch to China Unicom because they offer WCDMA 3G service. I am able to connect to CU data just fine but none of my Google apps will function. I can check gmail through the browser but not the internal application. This happens on Wifi as well.
I have done several factory resets with no luck. Any ideas?
after more than 12 hours my problem just went away. i don't know why. my guess is google has a mechanism in place to lock out accounts from more than one source or something. it's strange that i never had the problem with my G1 as often as i changed ROMs and when I changed SIM cards with it.
after more than 12 hours my problem just went away. i don't know why. my guess is google has a mechanism in place to lock out accounts from more than one source or something. it's strange that i never had the problem with my G1 as often as i changed ROMs and when I changed SIM cards with it.
Click to expand...
Click to collapse
I've been having issues with getting signed into Google here in China as well. I had also just come back from vacation where I was using a different carrier.
I had been unsuccessful in getting a connection to the Google servers for the last 12+ hours. I have reflashed my ROM (actually three different ones) and reformated my SD card, all with no luck.
Just got to the office and connected successfully right away over our VPN wireless router, however I'm still having trouble getting Gmail to load all of my conevrsations.
So, my guess is the usual iffy Chinese connection.
billybot6000 said:
I've been having issues with getting signed into Google here in China as well. I had also just come back from vacation where I was using a different carrier.
I had been unsuccessful in getting a connection to the Google servers for the last 12+ hours. I have reflashed my ROM (actually three different ones) and reformated my SD card, all with no luck.
Just got to the office and connected successfully right away over our VPN wireless router, however I'm still having trouble getting Gmail to load all of my conevrsations.
So, my guess is the usual iffy Chinese connection.
Click to expand...
Click to collapse
it's very strange. I never had an issue with my G1 but hero has all kinds of connection issues whether on WiFi or 3G. I rarely get email notifications, this issue, and now I can't download ANYTHING from the market.
please help ! =[
someone please help i just bought a sony ericsson x10 mini pro yesterday and im not able to browse the net, use the market or anything without it saying
"This could be a temporary problem or your SIM card may not be
provisioned for data services"
what does this mean?, do i need a new sim card in order to use the functions on the x10 mini pro? if so what sim card and where do i buy it ?

just got data T8282...cant connect on ATT!

cant anyone help me out with this? i went through the AT&T fuze tutorial online yet it still cant connect.
i dont think its because my device is a -82 vs the newer -85 is it? i got this phone with the understanding that the -82 will work but not at full 3g speed. thanks!
ive downloaded/installed the proxy patch 2.1 and att wat medianet and mms cabs...to no avail
Is the phone running a stock HTC ROM? If so, just run the HTC Connection Setup Wizard from Start -> Settings -> Connections. It will detect your AT&T SIM, and configure the MEdia Net connection correctly.
Oh, and moving out of ROM Development.
yea i have that set with wap.cingular access point and it cant connect still....no usernames or passwords or domains.
this page to be exact
http://www.wireless.att.com/answer-center/main.jsp?t=solutionTab&solutionId=KB95893
got up to the proxy part since there is no proxy program thing my t8282
b-16707 said:
yea i have that set with wap.cingular access point and it cant connect still....no usernames or passwords or domains.
Click to expand...
Click to collapse
When you look at the advanced setting of the connection it created, make sure that under Proxy Settings only "This network connects to the Internet" is checked. "This network uses a proxy server to connect to the Internet" should be unchecked.
I've used the T8282 on ATT and am currently using T8285. Both worked without a problem. Is the phone detecting your sim card? Is ATT network set-up, but your just showing now service? Look at your phone settings and check to see if a band has been selected ie GSM 1900/2100, auto etc. I don't recall the stock rom as well, haven't used it in 6 months, but if I recall, go to settings tab in manila, select the phone, wifi, internet etc. option, then select phone. You should find an option that says change band. Select it and see what band your phone is set to. If anything, check auto, and see what happens.
NotATreoFan said:
When you look at the advanced setting of the connection it created, make sure that under Proxy Settings only "This network connects to the Internet" is checked. "This network uses a proxy server to connect to the Internet" should be unchecked.
Click to expand...
Click to collapse
yes those are done.
Sean3 said:
I've used the T8282 on ATT and am currently using T8285. Both worked without a problem. Is the phone detecting your sim card? Is ATT network set-up, but your just showing now service? Look at your phone settings and check to see if a band has been selected ie GSM 1900/2100, auto etc. I don't recall the stock rom as well, haven't used it in 6 months, but if I recall, go to settings tab in manila, select the phone, wifi, internet etc. option, then select phone. You should find an option that says change band. Select it and see what band your phone is set to. If anything, check auto, and see what happens.
Click to expand...
Click to collapse
if it doesnt detect the sim card i wouldnt be able to call right? i can call. phone functions fine (cant send txt messages though for some reason but can receive).
im looking under settings > phone
Current network: AT&T Wireless
network selection: automatic
band: both network and GSM/UMTS set to auto
Did you say above that there was no username or password set in the settings->connections->connections? In other words the required username and Pass of Medianet?
yes those fields are left blank as per atts support page i linked
Go ahead and select "manage connections" under Media Net. On the next screen choose edit and go through until you can add the user and pass
All caps
Username: [email protected]
Pass: CINGULAR1
I had to fill these in manually when I first received my T8285. My data worked thereafter.
You're configuring your unlocked HD via the set up of a carrier based ATT Fuze. I think may be some of the problem. I configured the settings on mine seemingly a hundred times, but never in the manner suggested by the linked support page.
yea i was reading that and just checked this thread
http://forum.xda-developers.com/showthread.php?t=447648
and did what you said....no luck
tried [email protected] and [email protected] too
this is stupid. haha shoudltn be this hard. thanks for all the support, i appreciate it
lady at att did say this plan took effective 1.5 weeks ago so even though i called in today to change my plan to a data one...it should be working...
probably be easier if i could screenshot my phone....
Mine is [email protected]. Out of curiosity, did you input it in "all caps"?
yep tried:
[email protected]
[email protected]
[email protected]
[email protected]
my sim card is really old...can that be a problem??
phone should be "dialing" wap.cingular correct?
i wonder if there are problems with my phone because i cant send text messages either and if i go to settings > phone > services tab > voice mail and text messages.... it cant get any info from the network...
Yes indeed. Mine is two years old. Some that still have the cingular card have had issues. I guess the quickest way to find out is pop someone else's sim in to see if it configures your setting properly. When you go through set up initially, your ATT settings should be populated automatically. I'd like to see you get this working.
well my sim card is way beyond that. it was before att changed their name to cingular (and apparently back to att again now). got it when i got the sony ericsson t610 when it was first released...2003???
i wonder if this truly is the problem and i wonder if i take it into a store will they help me out since i have an unsupported phone.
phone when i got it new was able to call right away when i first got it and first popped in this oldie sim...so as far as settings are concerned, its working in that aspect
A sim that old could most certainly be the problem. ATT should support you. If it's the sim, then it's a service related issue and not an issue with the device. It may be that you just run by att and have them pop one of theirs' in and see. Another thought, after inputing the username and Pass, are you soft resetting?
I've used this cab on some devices (e.g. xperia) to get the AT&T data to work.
http://forum.xda-developers.com/attachment.php?attachmentid=67434&d=1201326345
see if that helps for you. I believe it's designed for the Tilt but shouldn't do any harm on your HD...
ok i finally figured this out after going to the att store. it turns out it was indeed my sim card that was keeping me from sending text messages (back in this old thread i started http://forum.xda-developers.com/showthread.php?t=515288&highlight=send+text+messages).
the online issue was due to 2 things. the att lady told me she had added a data plan but turns out when i went to the store the dude there checked and there was no data plan. second was again because of the old sim card.
my sim card was from back in the days of the sony ericsson t610 back in 2003 before att became cingular (and now back to att again).
so hopefully this thread can be future reference for others that may have trouble with their blackstone! woohoo!! i am connected now. feels good to have internet everywhere i go.

Trouble Connecting to AT&T EDGE on my Topaz

Hi! I am experiencing trouble connecting to AT&T EDGE on my unlocked Topaz. I purchased this phone aware of the fact that I wasn't going to have 3G available but not having EDGE as well is very disappointing.
I have an AT&T GoPhone account and I have also installed the recommended settings from the Connection Wizard that popped up when I had inserted my SIM Card. However, I constantly have a gray E icon on my status bar and I am unable to access the internet. When I test the internet connection by trying to update the weather I get the following error: "The answering modem disconnected. To check your connection settings and change them if needed, tap Settings."
I have called AT&T they kept me waiting for an hour and were not able to help me. They were going to file a report for the tech support to review but they did not file the report that because I did not have another telephone number to give to them beside my cell phone for them to call me back(I am an international college student, I don't have a land line). I then tried to get help from their online chat support but their system won't allow me because my account is a GoPhone. So I am stuck here with my $450 dollar phone not able to enjoy its features to its full extent .
Is there anyone else that has experienced this problem? Or is there anyone that could help me configure the connection settings manually?
Thanks!
erdamn said:
Hi! I am experiencing trouble connecting to AT&T EDGE on my unlocked Topaz. I purchased this phone aware of the fact that I wasn't going to have 3G available but not having EDGE as well is very disappointing.
I have an AT&T GoPhone account and I have also installed the recommended settings from the Connection Wizard that popped up when I had inserted my SIM Card. However, I constantly have a gray E icon on my status bar and I am unable to access the internet. When I test the internet connection by trying to update the weather I get the following error: "The answering modem disconnected. To check your connection settings and change them if needed, tap Settings."
I have called AT&T they kept me waiting for an hour and were not able to help me. They were going to file a report for the tech support to review but they did not file the report that because I did not have another telephone number to give to them beside my cell phone for them to call me back(I am an international college student, I don't have a land line). I then tried to get help from their online chat support but their system won't allow me because my account is a GoPhone. So I am stuck here with my $450 dollar phone not able to enjoy its features to its full extent .
Is there anyone else that has experienced this problem? Or is there anyone that could help me configure the connection settings manually?
Thanks!
Click to expand...
Click to collapse
Check with your service provider that the edge service is enabled for your account. Then check you have paid for the correct plan (I don't know the procedure that applies to AT&T, but they may require all this).
If you have everything enabled/paid for then there is no technical reason why you should not be able to connect unless there is no service in your area!
pa49 said:
Check with your service provider that the edge service is enabled for your account. Then check you have paid for the correct plan (I don't know the procedure that applies to AT&T, but they may require all this).
If you have everything enabled/paid for then there is no technical reason why you should not be able to connect unless there is no service in your area!
Click to expand...
Click to collapse
pa49, thanks for your reply. I am sure that edge service is enabled for GoPhone accounts (not 3g though) and I am sure there is service in the area. If I am not wrong, the gray "E" icon on my status bar is telling me that there is edge available but that I am not able to connect to it.
I am just hoping that there is someone here that is using an unlocked HTC touch diamond2 in the united states that is able to access the internet via edge.
erdamn said:
Hi! I am experiencing trouble connecting to AT&T EDGE on my unlocked Topaz. I purchased this phone aware of the fact that I wasn't going to have 3G available but not having EDGE as well is very disappointing.
I have an AT&T GoPhone account and I have also installed the recommended settings from the Connection Wizard that popped up when I had inserted my SIM Card. However, I constantly have a gray E icon on my status bar and I am unable to access the internet. When I test the internet connection by trying to update the weather I get the following error: "The answering modem disconnected. To check your connection settings and change them if needed, tap Settings."
I have called AT&T they kept me waiting for an hour and were not able to help me. They were going to file a report for the tech support to review but they did not file the report that because I did not have another telephone number to give to them beside my cell phone for them to call me back(I am an international college student, I don't have a land line). I then tried to get help from their online chat support but their system won't allow me because my account is a GoPhone. So I am stuck here with my $450 dollar phone not able to enjoy its features to its full extent .
Is there anyone else that has experienced this problem? Or is there anyone that could help me configure the connection settings manually?
Thanks!
Click to expand...
Click to collapse
Go into Settings\Connections\Connections\Advanced and make sure both networks are set to MediaNet and take out the proxy server if there is one.
Bruce Inman said:
Go into Settings\Connections\Connections\Advanced and make sure both networks are set to MediaNet and take out the proxy server if there is one.
Click to expand...
Click to collapse
It didn't work
erdamn said:
It didn't work
Click to expand...
Click to collapse
Ok. Make sure you have the correct settings. Then in Manage existing connections tap and hold the modem connection and delete the entry. Reset the phone and then input the settings again manually. Don't let the phone run the auto connection setup.
pa49 said:
Ok. Make sure you have the correct settings. Then in Manage existing connections tap and hold the modem connection and delete the entry. Reset the phone and then input the settings again manually. Don't let the phone run the auto connection setup.
Click to expand...
Click to collapse
Unfortunately what you have suggested is not working also :S.
Maybe I have something wrong with my settings. Even though I have done a lot of searching in order to find the correct settings for an Unlocked Diamond2, I have not been able to find the settings specifically for an Unlocked Diamond2 with WM6.1/6.5. The settings I found were for previous versions of WM or were for another HTC model.
erdamn said:
Unfortunately what you have suggested is not working also :S.
Maybe I have something wrong with my settings. Even though I have done a lot of searching in order to find the correct settings for an Unlocked Diamond2, I have not been able to find the settings specifically for an Unlocked Diamond2 with WM6.1/6.5. The settings I found were for previous versions of WM or were for another HTC model.
Click to expand...
Click to collapse
What radio are you running?
I hate to say it but I don't think your going to get it to work. And I'm sorry because its all my fault! See for the past 4 years I have been a DM for AT&T and one day I was braging to our "smartphone support team" about how with my 8925+WMWifi+PayGo account with the 19.95 unlimited data package I could brodcast 3g wifi speeds through out my entire house with no need to worry about being charged overages for the 5GB soft limit (simply because no "real" info is needed to create a paygo account you can just say your name is Jon Doe and the give you one)
Two days later I got an email that the prepaid unlimited internet service had been disscontinued forever :-(..... And much more security was added to the system....
Your best bet to get internet working on the device is to put your sim card in an old moto razor (this way your razr IMEI doesn't flag you as a "smartphone" ) dial 611 and subscribe to the highest data package you can which is like 200MB or something.
Then you can put your sim card back in the TD2 and you should be good to go... for 200Mb's that is.... then your SOL...
and again sorry... you know what they say "loose lips sink ships"
or if you have a credit card or bank account switch to Pick-Your-Plan its a lot cheaper minute wise in the long run and you can have unlimited data just make sure to give them a bogus IMEI to some crappy razr you can find in every household....

Working carrier unlock, CID, tether on Optimus 7

I have successfully done the following:
1. Carrier Unlocked a Telus branded LG E900h Optimums 7
2. Connected the phone to Fido
3. Use 3G on Fido
4. Fixed broken Call Display problem
5. Tethered E900h to laptop
6. Set up Wireless Zune sync
I thought I would share my experience to reduce frustration that any others may encounter.
Unlocking the phone
Because my local phone unlock guy was closed the day I purchased the Optimus 7, I tried instantunlockcodes.com and purchased an unlock code for $10. I received 2 codes the next day, but neither worked. I recommend not using this website, as tech support responses were next day, and they were never able to get the code working (after 3 days).
I took the phone to my local unlock guy, who unlocked it successfully. He charged me $65.
For anyone who is trying to unlock the phone, when you insert a foreign SIM, the Optimus 7 asks you for a PIN. This is where you enter the service provider unlock code. When I tried either of the codes that instantunlockcodes.com gave to me, it said, "SIM ERROR". After looking around on the Internet, it seems that this is the message that comes up when it's the wrong code.
Getting Data on Fido
Telephone/voicemail automatically worked on Fido. To get Data to work (ie 3G) I had to change the APN setting.
Go to SETTINGS -> Cellular -> edit apn
"edit apn" is the button at the bottom of that screen. The settings should be:
APN: internet.fido.ca
User name: fido
Password: fido
Have Data connection ON and 3G connection ON.
Internet now worked for me, including browser and Outlook. Outlook connected to Exchange flawlessly.
Incidentally, the first time I set up my phone, I set up Windows Live immediately (startup wizard), and then Outlook Exchange. My appointments from Exchange were all in bright pink.
Because Windows Live was giving me a sync error, I did a factory reset, and set up Outlook first this time. Now, my Exchange appointments are in red. No idea how to change the color, but I prefer red. In both cases, the Windows Live account's appointments are in Blue.
Call Display and MMS
Call Display and MMS did not work. Frankly, I don't care about MMS (there is another thread on how to fix this), but Call Display is quite important.
Specifically, Call Display worked when land lines called me, but did not call when most cell phones called me. They would read, Unknown.
The solution to this was through Fido: I had to call them and change my Call Display from "Call Display with Name Display" to "Call Display WITHOUT Name Display". Evidently, this problem has manifested in other unlocked phones, such as some Blackberries as well.
A point of interest: when I put in the original Telus SIM, the call display also did not work properly. They must have given me Call Display with Name Display as well.
Tethering and Wireless Sync
Tethering is a really handy thing for me. I use it infrequently, but it's really invaluable when I need it.
I've modified the solution that's been posted around, to be specific to Fido, but to clarify a couple of the screens, as well:
1. If you haven't already, install Zune first. While tethering is enabled, Wired Sync on Zune won't work. But Zune has wireless synch, which is way cool anyhow.
2. Set up Wireless Sync on Zune. I won't go into all the details, but basically, make sure that the phone is connected to the WiFi network, that your PC has access to the same network (it can be hardwired, as long as it has access to the same IP subnet). If you have a guest/work router, make sure that both your phone and PC are on the same network. With your phone plugged in, run the Wireless Sync wizard on Zune. It's painless.
3. Unplug your phone.
4. Press Phone, and dial ##634#, then press the Call button. This makes visible a hidden app called "MFG". Go to the list of all your apps, and you'll see a new icon with a hammer, wrench and screwdriver lablelled MFG. Open it.
5. You'll be asked for a password. Enter 277634#*# -- you'll need to enter this password every time you want to go into MFG, which is a good thing, because I think you can seriously mess up your phone if you play around in there.
5. Go to Engineer -> Port Setting
6. Select the QC COMPOSITE and validate. The phone will automatically reboot.
7. VERY IMPORTANT STEP: This is totally counter-intuitive, but you must go to SETTINGS -> Cellular and turn OFF Data Connection.
Note that once you're done tethering, you need to turn it back ON in order to use Internet on the phone.
8. Connect the phone with a USB cable.
9. Windows will automatically detect the phone, and if you're using Windows 7, will prompt you with a popup with the download link for the LG driver. It says LG CDMA driver, but it works. The full file name is LGUSBModemDriver_Eng_WHQL_Ver_4.9.4_All.exe
10. Once the drivers are installed, click start, and type "Modem", click Phone and Modem.
11. Click Modems, double-click LGE CDMA USB MODEM, click the Advanced tab.
12. Under Extra Initialization Commands, enter:
+CGDCONT=1,"IP","internet.fido.ca"
Replace internet.fido.ca with a different provider APN, if you're not with Fido, obviously.
13. Close the Modems screen, click Start, type "Dial" and click Set up a Dial-up Connection.
14. Enter your home area code because Windows forces you to, and go to the next screen. Then enter as the dialing number:
*99#
Leave the login/password blank. Click connect -- and PRESTO! Tethered Optimus 7.
* IMPORTANT *
Once you're finished tethering, you need to turn Data Connection back on. For some reason, when Data Connection is on, tethering doesn't work. Fortunately, it's a pretty simple toggle to switch.
I hope that this is helpful!
This was very helpful thank you!
I want to get an optimus 7 and unlock it but i was counting on a website since i don't have an unlock guy. Is your guy by any chance in montreal?
And if not then do you think unlockallcellularDOTcom will work?
Also, how are you liking the optimus 7's hardware(not wp7's missing features)?would you pick it over the surround?
Unfortunately, my guy is in Vancouver, and I have no experience with unlockallcellular.
I love the Optimus 7's build -- it is an extremely well built, sturdy device. I chose it over the surround (basically the same price) because I don't have occasion to use the slideout speaker, and the LG is thinner.
The only hardware aspect I don't like is the micro-USB plug on the side.
Try typing "LG Optimus 7 Unlock" in Ebay.ca, there only option there is mobilexpresscanada, which charges $25 right now to unlock it, and that is the price through ebay. On their site, the price is at $40. I have used their services in the past, and they are often very reliable and fast. I have yet to unlock my own Optimus 7, as I see no need for it yet (I travel to Europe and Middle East after May, so the price and need might be different then), however, there are possitive reviews regarding the unlocking of the Optimus 7 on their Ebay page. Good luck.
I'm having a problem with the same model phone. I've put a bell SIM that I just picked up in the phone and it's not prompting me for an unlock code. I've purchased an unlock code from a site I trust, but it's kind of hard to enter it with no prompt.
Did you have to do anything special for the unlock prompt to appear?
I'm having issues... I walked through the APN settings and all on the E900h but I still get that triangle which basically says no data. I have the phone unlocked and all... thought maybe I need to put some setting in the MFG up or something? Really confused... I get cell coverage but zero/nada on Data/3G.
There's any way to set the MMS server of a carrier that's not preset on the "Profiles" of MFG App?
Thanks
jessiethe3rd said:
I'm having issues... I walked through the APN settings and all on the E900h but I still get that triangle which basically says no data. I have the phone unlocked and all... thought maybe I need to put some setting in the MFG up or something? Really confused... I get cell coverage but zero/nada on Data/3G.
Click to expand...
Click to collapse
Can anyone confirm this?
Does an unlocked Telus Optimus 7 think it's roaming when it's on the Fido network?
I know that was an issue with older GSM phones due to the Rogers/Fido network code renaming...
no power supply while tethering
I noticed when I left my optimus in tethering mode the battery kept going down even while connected to computer via usb. There seems to be power because when it got down to zero, the usb kept powering my optimus. Is the power supply in tethering mode reduced? Anybody with similar experience?
any idea how to take the menu MGF back again to "normal" ? because sometimes we could have to send back to LG and they will notice, after i did this (only put that engenier code the phone unlocked for any network ) hahahaha is this possible ? how back to normal anyway ?
Well, the MFG app can be deleted like any other app. So there is that. And I am pretty sure your phone is NOT unlocked for all networks when you put in ##634# and then enter 277634#*#
I would like to ask the OP if he attempted to input the unlocking codes he received from the website, more than 3 times?
I also received codes from a website and after 3 attempts at inputting them at the pin screen, the phone now asks for a PUK code?
I thought this odd.
I put my sim that came with the phone back into it and it did not ask for any other code.
I have now tried sims from 4 other networks, from friends etc, and every time it asks for a puk code.
Any info you can provide would be great. I have gone to hell and back with this phone I plan to make a big tutorial at the end so that nobody else has to go through the same.
There is so much mis-information on the internet about these handsets, its unreal
Cheers
TLw
radeon_x said:
Can anyone confirm this?
Does an unlocked Telus Optimus 7 think it's roaming when it's on the Fido network?
I know that was an issue with older GSM phones due to the Rogers/Fido network code renaming...
Click to expand...
Click to collapse
Confirmed: The phone is always roaming on Fido. So it's a bit of a hack in that you have to enable data while roaming - just need to be careful to disable data in case you are ACTUALLY roaming.
Sent from my GT-I9000M
Thanks!!!
The hint with setting Data-Connection to OFF was the clue.
Works now also with vodafone in Germany!
U.
You can obtain your unlock code in fastgsm.com with your IMEI, and change your APN Settings to your new carrier network..
Can you tether this phone with a mac? And please don't start this fanboy thing...

[Q] Problems with Receiving SMS

Dear Samsung Focus users,
I really need your help and suggestions. I bought an unlocked samsung focus last week and I love it! But I have this problem:
- I cannot receive text messages until I reboot the phone
- After I reboot the phone, text messages will start flying in to my inbox
- Then the problem starts again and I have to reboot the phone to retrieve new text messages
I live in the basement but I have no trouble calling or sending and receiving SMS with my previous phone.
I hope it has something to do with the OS thus they can fix it.
Thanks!
Sometimes I get it where the device thinks it's on the network, but won't use cellular data or SMS. I'll see this after being in the basement for a few hours with a signal that fades in and out.
Try turning on Airplane mode, wait 5 seconds, and turn airplane mode off. It should reconnect to the network and start running again.
I've seen this on 'droids, WinMob 6, and on the iphone 3 as well. I've just sort of figured it was the radio chip giving up on retries. I could be wrong, but recycling the radio seems to work for me.
koornneef said:
Sometimes I get it where the device thinks it's on the network, but won't use cellular data or SMS. I'll see this after being in the basement for a few hours with a signal that fades in and out.
Try turning on Airplane mode, wait 5 seconds, and turn airplane mode off. It should reconnect to the network and start running again.
I've seen this on 'droids, WinMob 6, and on the iphone 3 as well. I've just sort of figured it was the radio chip giving up on retries. I could be wrong, but recycling the radio seems to work for me.
Click to expand...
Click to collapse
when you have no signal, the operator will keep trying several times during different time spaces until your phone gets it. the problem with focus is that they quit trying to received. i dont know but only works after a reboot. In other phones you just need to wait till next carrier push try. i think its a bug, probably to unlocked phones. I have an At&T unlocked focus.
I am having the exact same problem. I dont know what to do
Count me in.
I am also experiencing this issue.
Here are my thoughts on the issue.
1. I bought the phone from Rogers (GSM)
2. I bought an Unlock code from the web (SIM Unlock only)
- You know you're device is carrier locked if you cannot run Samsung's Network Profile App, or if it shows no other profiles in the list. The app is available on the marketplace.
3. I use the phone on SaskTel's 4G network (Saskatchewan UMTS/HSPA+)
Now my thought is this.
Whichever settings are not provided by SIM are set by the Network Profle xml that is specific to each carrier.
My assertion is that if you cannot change Network Profiles via Samsung's app, you cannot use your 'carrier free' (AKA SIM unlocked) device on another network without some hiccups.
If someone can figure out how to enable Samsung's Network Profile on a carrier purchased device, I'd be happy to hear how it's done.
I should also note that I've since developer unlocked via Chevron's WP7 tools with no change (Installed NoDo right after).
If someone knows what the network profile xml actually sets and can figure out an alternate way to set the settings..... ie Registry editor, etc. We would appreciate this.
dead_on_the_floor said:
I am also experiencing this issue.
Here are my thoughts on the issue.
1. I bought the phone from Rogers (GSM)
2. I bought an Unlock code from the web (SIM Unlock only)
- You know you're device is carrier locked if you cannot run Samsung's Network Profile App, or if it shows no other profiles in the list. The app is available on the marketplace.
3. I use the phone on SaskTel's 4G network (Saskatchewan UMTS/HSPA+)
Now my thought is this.
Whichever settings are not provided by SIM are set by the Network Profle xml that is specific to each carrier.
My assertion is that if you cannot change Network Profiles via Samsung's app, you cannot use your 'carrier free' (AKA SIM unlocked) device on another network without some hiccups.
If someone can figure out how to enable Samsung's Network Profile on a carrier purchased device, I'd be happy to hear how it's done.
I should also note that I've since developer unlocked via Chevron's WP7 tools with no change (Installed NoDo right after).
If someone knows what the network profile xml actually sets and can figure out an alternate way to set the settings..... ie Registry editor, etc. We would appreciate this.
Click to expand...
Click to collapse
you may try the fix posted on page 2 of this forum for sms not receiving. It worked for me and not having any problems since.

Categories

Resources