[Q] stuck on recovery screen - Legend General

Hey forum
first time posting but i'm stuck on the recovery screen on my htc legend and the recovery-windows.bat is no longer doing it's job it crashed on me right after i performed a wipe to install a new rom now i can't boot to any rom as there is none and i can't get past the recovery image screen.
Regards scott
some extra information i can still get to the bootloader menu and navigate through that. when i turn on i see htc logo then screen goes black

Read this - [HOWTO] USB Unbrick

hey forum
anyway update turns out the boot animation wasn't show so when i left it alone to do some research it booted into the rom. now my problem is that it my phone will no longer see my sd card i tryed grabbing a spare one i had and wouldn't reconise it ether any help would be great
regards scott
btw the rom i got from: http://forum.xda-developers.com/showthread.php?t=679122

Related

Splash screen hang

Hello,
I've got a 32B version of the HTC Magic/Sapphire.
I got Rooted by this tut: http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
And i tryed to update it with this tut: http://theunlockr.com/2009/08/29/how-to-load-a-custom-rom-on-your-htc-magic/
But after rooting and rom updating he doesn't start normally anymore.
He's got stucked with the Vodafone splash screen...
I can only enter recovery mode and fastboot.
I searched on the internet but i didn't find a solution.
Can someone help me, i can do nothing with my phone right now.
Thank you!
same thing happened to me yesterday
I had the same thing happen to me yesterday following the unlockr methods.
it just hung on the splash screen on boot, i was able to get into recovery mode, but if i tried to flash a rom from there just got "E:Can't open /sdcard/update.zip (bad)" messages. finally i just restored from my nandroid backup.
I have MT3G.
How long do you wait on the splash screen? Some roms, you may have to wait several minutes.

My HTC Hero have problems with booting

Hi ,
Since Friday I have problems with my phone.
Friday morning I couldnt turn off my alram clock, screen wasnt responding. I pull battery and phone was rebooting all the time (Hero logo -> htc logo -> hero logo etc.. ).
I have turn it on by pressing power button and menu key to launch safe mode. I have launched it then I have uninstalled freshly installed application rebooted the device and it start working properly again.
Today the same thing happend. But this time I cant turn on safe mode.
The proces of rebooting take few minutes not normal amount of time(very very long) .
I have tried solution from this post
forum. xda-developers .com / showthread.php?t=556038
that didnt helped ... just make the rebooting sequence longer
I dont know what to do next.... please help
Phone info
HBOOT- 1.76.0004(hero10000)
RADIO- 6.35.04.25
Do you have a custom ROM or the stock one ?
I have stock rom .
But I have used the recovery img to upload(executed) the rom that was in the soultion in this post
forum. xda-developers .com / showthread.php?t=556038
I dont know what it did it just upacked and loaded the custom rom I think....
I have put originally RUU and still my phone doesn't turn on.
It still doing boot loop, this takes about 15 minutes.
I think I will call HTC support and return the phone for repair
Have you tried to boot WITHOUT SD in phone?

[Q] Black screen after downgrade

I was running Cyanogen 6.1 on my HTC Dream fine, after that i decided for full downgrade. So i searched google for it and found the cyanogen wiki for doing it. I followed each step and after flashing DREAIMG.NBH to my phone, it restarted. And so it entered a boot loop. I took off the batery and then tried to enter recovery or the bootloader.When powering the phone normally, i see the T-Mobile logo, and after that, the screen turns black. Whenever i try Camera + Power, after the logo it goes to black screen. Home + Power points the same thing and so does back + power. Fastboot doesn't seem to work even though i have all drivers properly installed and the Android ADB Device shows under Device Manager.
I know i messed up because i didn't wipe before the downgrade. If there is any possibility to repair it? If so..what is to be done?
Thank you in advance!

[Q] Cyanogen Mod - Help - Zte Blade stuck at Green Andoid Image at startup-Won't Boot

Hi, first time modding and I've come up with a problem.
Baisically what's wrong now:
Phone is stuck at large green android logo when I turn on the phone.
Can't boot into Cyanogen
Can't get Clockworkmod to open
Phone only turns off with a battery pull
How I got the phone to this point:
Followed the instructions at wiki.cyanogen
(Backed up with titanium backup pro)
The first time I installed the mod I got stuck in a boot loop. But I fixed this by deleting data and cache in Clockworkmod and going through the steps again.
The phone and it's new mod seemed to work. I installed the google apps.zip, via CLockwork, still fine.
Then I tried to reinstall apps from Titainium Backup.
Some of these went well, but I started to get 'com.google.process.gapps' stopped working force close notifications.
I rebooted to see if that would make them stop.
But I got stuck in a boot loop of the Cyanogen animated logo, where it would boot, show me the unlock screen, I would unlock it, get another 'com.google.process.gapps' message and the phone would then freeze and reboot. The sequence then continued.
I tried battery pulling and tried to boot into Clockwork by holding down Menu Up and Power. But not after a while it just shows the green android logo. HELP.
I didn't read all!
So...
this problem is easy fix!
I spent 3 Hours with my blade to get my Blade II to work!
you have same problem which some other has posted somewhere here...
search on google or on Modaco: ZTE Blade TPT GEN1 or GEN2...
follow instructions!
now Blade II needs to work!
http://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/

[Q] Stuck on ALL Splash Screens after Installs

Hi everyone, took a friends Nook Color after showing him mine with MIUI on it (1.9.16). Told him I could get his 1.2 or 1.3 refurbished Nook to MIUI or CM7, and after using a SD Card CWR to install either (with wiping all data/cache/system/etc.), I can get the install to perform fine in CWR. However, upon booting, I get loops at any and all splash screens, MIUI stays on orbiting planet, CM7 stays on Nook Color rainbow screen, none can actually get into the OS. I've tried to replace partition with boot zip around here, to no avail. Anyone have any ideas what the problem is?
Also, when trying to restore 1.2 or 1.3, the keyboard will flash onscreen when trying to type info to register, then immediately hide; I'm unable to input text before it disappears again! Thanks for your help.
Nobody has any ideas about how to COMPLETELY format, and not get the boot loop? I can install any ROM fine, I just get stuck on the boot logo. Also, I tried the boot partition zip. Thanks in advance.
Turns out, because the keyboard was wonky, I couldn't ever get past the registering in 1.2 or 1.3, which for some reason, kept me in a boot loop after installing a different ROM. I guess, you either need to register, or bypass the Oout of Box Experience, in order to keep out of this boot loop. All fixed now!

Categories

Resources