Related
Hello all,
I'm having some problems with the CE-Star suite.. After 2 resets, the chinese text would just become SQUARES and it could only be restored by reinstalling the CE-suite program. Anyone encountered this problem before and can it be resolved? i just installed it and has yet to get it registered, is this the cause?
Previously i installed maction monster chinese and after not being able to use any input or whatsoever of that program, I tried uninstalling it but its always there! how do i get rid of it?! when i run remove programs and clicked on it, it asks me to reset my unit to completely remove it but everytime i resets it its still there! HELP!!
tried using ActiveSync to remove it but still can't!
another problem with my activesync, everytime i sync and when it reaches to sync files, it would tell me that there is a unresolved item. i checked and delete the unresolved file to see if i can bypass it but it seems that every file is unresolved?!
it recomends to restart the computer and phone then sync again and i've been having this problem even after umpteenthed reboots..
any help would be appreciated!
cheers!
Joel
Which version are you using?
I got CE-Star v2.8 Beta 4 installed on my Wizard and it works fine. Chinese characters are properly displayed, some programmes like TMCP are displayed in Chinese now (which I was hoping it wouldn't btw lol) and input with PinYin works as well as drawing with your Stylus on the Touchscreen. Earlier versions of 2.8 didn't work, so give beta4 a try if you haven't yet.
i didn't buy a cestar ver 2.8 beta4. and just use a trial one. but when i wanna change the cestar back to keyboard mode. it was out of order. i don't think it's trail ver problem, it should be a bug. so i will not buy it before the final ver release.
if anyone can support a chinese rom or other way to change eng ver into chi ver, it should be the best news.
Well which Trial version are you using?
btw, it seems that v2.8R1 has been released and it seems to be more stable then the beta4. I haven't give it a try yet, will have to mail the developers about it I guess....
i'm using version 2.8 which is meant for WM5..
the problem is when u soft reset a couple of times then the chinese characters would display as squares.. kinda annoying as it can only be restored with a reinstall..
what about the monster chinese 5 problem? anyone encountered such a problem before? i can't uninstall it as it will ask me to reset the phone to fully uninstall but i have done it dozens of times and its still there, can't get rid of it.
by the way, i unlocked the extended rom and was wondering which of the files are safe to delete? anyone knows? i'm having the MDA vario by t mobile.. i can see that there are heaps of t mobile crap in there but not sure which are crap and which are essential..
There are several releases of v2.8
As I posted earlier, earlier beta releases didn't work, but beta4 did.
And it seems that R1 works fine. So What about give that info about which version you're exactly using? If you recently downloaded it, it should be R1, you might want to give beta4 a try
I have CE-Star running for some time now and had 20+ soft-resets and it's still working fine.
joelsoo said:
i'm using version 2.8 which is meant for WM5..
the problem is when u soft reset a couple of times then the chinese characters would display as squares.. kinda annoying as it can only be restored with a reinstall..
what about the monster chinese 5 problem? anyone encountered such a problem before? i can't uninstall it as it will ask me to reset the phone to fully uninstall but i have done it dozens of times and its still there, can't get rid of it.
by the way, i unlocked the extended rom and was wondering which of the files are safe to delete? anyone knows? i'm having the MDA vario by t mobile.. i can see that there are heaps of t mobile crap in there but not sure which are crap and which are essential..
Click to expand...
Click to collapse
Kage Musha said:
There are several releases of v2.8
As I posted earlier, earlier beta releases didn't work, but beta4 did.
And it seems that R1 works fine. So What about give that info about which version you're exactly using? If you recently downloaded it, it should be R1, you might want to give beta4 a try
I have CE-Star running for some time now and had 20+ soft-resets and it's still working fine.
thank you very much for your reply kage..
i just tried downloading the ce star again.. its still downloading now so i'm gonna have a go again with installing it later..
is yours registered or also a trail version?
Click to expand...
Click to collapse
trial...since I'm just testing it right now for viewing Chinese characters and it seemed unstable at first.
Seems only R1 is available for download, if you need beta4 to try, give me a PM
Kage Musha said:
Well which Trial version are you using?
btw, it seems that v2.8R1 has been released and it seems to be more stable then the beta4. I haven't give it a try yet, will have to mail the developers about it I guess....
Click to expand...
Click to collapse
i've tested beta4 beta3 and r1 as well, but as the results are b3 can't let me input anything except english, b4 can input once but after changing input mode it's dead. r1(from offical website) is same as b4. now i met one more problem is after i uninstall b4 and soft reset machine, the sms function lost. i can only hard reset machine. faint...... so the chinese rom looks like very important
Just wonder know, why not Maction Monster Chinese ? The v5.1 released and it work great with my kjam.
shentan said:
i've tested beta4 beta3 and r1 as well, but as the results are b3 can't let me input anything except english, b4 can input once but after changing input mode it's dead. r1(from offical website) is same as b4. now i met one more problem is after i uninstall b4 and soft reset machine, the sms function lost. i can only hard reset machine. faint...... so the chinese rom looks like very important
Click to expand...
Click to collapse
That's rather strange indeed. I Don't have this problem with beta4.
Although it is slow with switching to CE-Star keyboard :s
As for a Chinese ROM, maybe you should try and look up for the Dopod ROMS, Dopod 838.
I came across problems on Monster Chinese v5.1. I tried to add a speed dial and then in the middle of my input it just suddenly disappeared.
I am using O2 ROM on Dopod 838.
(By the way, Dopod ROM sucks, dont even try it... I tried O2 ROM and then I never want to use the original again)
i installed CE-suit, but how do you activate the input?
it said hotkey is CTRL and Shift, but i don't have CTRL. i tried the dot key, but still won't let me change the input.
So what is the latest stable CEstar for wm6? So many versions going around....and keygen doesnt work....arh....someone pls...
http://forum.xda-developers.com/showthread.php?p=1562212#post1562212
finding it hard to get good answers....so in anybodies opinion
the 02 xda mini s
is there any updates from the origonal 1.5.4.2 WWE? if so where can i get em from?
If no updates, maybe the 02 rom isnt the most up-to-date?? and it would be better to change to i-mate? or a q-tec?...if so...which would people recommend? and where could i find them? also...would they effect my being on 02 at all or would evrything stay the same and just the device will work better?!?
what do people think?
jamie
Hello jamie,
I would think that you should at least upgrade to the qtek9100 rom if u worry that u might not turn back to the O2 provided ROM. Or if you want even better performance, you can use the latest imate ROM. But i read in posts that you cannot downgrade as the loki wizard does not work in this rom.
Anyhow, i'm using an xda mini S and using the imate rom though.
Cheers
I was wondering about this as well. I've got an O2 XDA Mini S and it all seems to be working fine (so far). I don't use it for anything spectacular though phone, diary, notebook and I have a few other apps on it. I also run spb pocket plus and spb diary, again with no particular problems.
I know the old adage, "if it ain't broke, don't fix it", but are there any benefits from moving to the latest imate ROM, say?
tzehming,
You said you couldn't downgrade. Do you mean that once you put the latest imate ROM on, you can't ever go back to the original O2? Also, what's the deal with LokiWizard - is there something that needs to be done before the ROM can be upgraded?
(apologies for the dumb questions, I'm starting to get to know my way around the device)
Thanks,
John
jko said:
I was wondering about this as well. I've got an O2 XDA Mini S and it all seems to be working fine (so far). I don't use it for anything spectacular though phone, diary, notebook and I have a few other apps on it. I also run spb pocket plus and spb diary, again with no particular problems.
I know the old adage, "if it ain't broke, don't fix it", but are there any benefits from moving to the latest imate ROM, say?
tzehming,
You said you couldn't downgrade. Do you mean that once you put the latest imate ROM on, you can't ever go back to the original O2? Also, what's the deal with LokiWizard - is there something that needs to be done before the ROM can be upgraded?
(apologies for the dumb questions, I'm starting to get to know my way around the device)
Thanks,
John
Click to expand...
Click to collapse
Hello jko,
Yup u're right about having to use loki to unlock the rom. Search it in the forum and u'll find it. Just type loki.
After unlocking using the software, you can then install any rom for wizards, i.e. O2 mini xda s rom, imate rom or qtek 9100 rom. The one i'm using now is the latest one, which is the imate rom. I heard it cant be downgraded and we'll have to wait for an updated loki software to fix that. But the qtek 9100 rom can be downgraded again. I suggest u try the qtek rom as it makes the pda much faster. The O2 rom is really a turtle when opening the slider and closing it.
Hope this helps
Having read the advice above I'm going to unlock my device and flash it with the qtek 9100 ROM.
Once I've done that, what CAB files do I need to install in order to get O2 MMS and O2 GPRS working again?
Thanks,
Having read the advice above I'm going to unlock my device and flash it with the qtek 9100 ROM.
Once I've done that, what CAB files do I need to install in order to get O2 MMS and O2 GPRS working again?
Thanks,
Can't answer your question, but just a request to post back your experience once you're done. It would be appreciated.
John
well, you could again search the forum for gprs settings. u may not get the automatic setup anymore, thereby may have to do it manually. search for O2 gprs in the forum. as for mms settings, someone made a cab file, I can't remember which forum , but again, it can be searched. Try O2 mms.
hope this helps
I've got the mini S too...
First thing I did when I got it was to get rid of all the o2 crap on it... couldn't believe how slow it was even in basic mode!
I did the whole hard reset then soft reset when it says "customizing..."
This basically leaves you with a bare o2 wm5 rom without any of the customiztion installed. MMS won't work and either will GPRS.
To get these working you need to install Total Commander on your mini S and browse to the /extended_rom/ directory.
The cab files in this directory are the files installed when it says "customizing..." on a hard reset.
You can then selectively install which ones you would like to install.
There is a brief outline of what each one is on the htc wizard page on the wiki but I've made a better one I'm gonna stick on there.
You also need to input the GPRS settings and MMS settings manually and install a cab from the extended rom that creates the MMS folder in the messaging application.
After you've done all this you'll notice a considerable improvement over the o2 rom with all the crapola installed.
I've also used lokiwizard to unlock it all.
Not tried the qtek rom or the new i-mate one... as I don't use push-email or the like and haven't found any considerable bugs yet I don't need to.
I have found naggaly features which after installing the RegistryWizard, NullKbd and a few others... they seemed to be solved!
I recently updated my O2 mini S 1.5.4.... rom to the new imate one and i must give my approval for upgrading to this rom. Its faster, more stable, is much better on battery life for some reason.
I recently updated my O2 mini S 1.5.4.... rom to the new iMate one
Click to expand...
Click to collapse
Where can I get this. It does not appear to be in the Rom download area (or is it under a different name?)
its in this thread http://forum.xda-developers.com/viewtopic.php?t=42638&postdays=0&postorder=asc&start=0
Well I successfully upgraded to the new i-mate ROM and it's MUCH faster. There's a lot less lag when sliding the keyboard in & out, and the general responsiveness of the device is considerably better.
I've managed to get GPRS working, and I've installed the MMS cab but I can't send or receive MMS's at the moment - it keeps telling me that it couldn't send the message. So I'm going to post elsewhere in this forum and check that I've got the correct MMS settings.
Overall though, I'd definately recommend upgrading to this ROM. Just remember to use Total Commander to take a backup of the O2 Extended ROM beforehand so that you've got the MMS cab-file available to install at a later date.
Excellent. Thanks for the feedback. I may well give it a go later today.
John
Code:
Just remember to use Total Commander to take a backup
Is this the one from Ghisler.com?
I downloaded this but cannot find any instructions or reference to backing up the Rom. Any idea where I can get the instructions (if there are any).
Code:
browse to the /extended_rom/ directory
I cannot see this in the Total Commander Directory list.
Any suggestions appreciated.
Just got my o2 mini s a couple of days ago and I am loving it soo far!!
However, I already encountered a couple of bugs - the system laggss REALLLI bad, like when the slider is pushed out, even when closing/running certain programs the device hangs. Also, I have seen a couple of times where the "phone" application will not load up. In all these cases I have had to do a soft reset on the device.
I am thinking of upgrading the rom - but this is my first pda, and i know nothing at all about fidgeting with the software. I don't want to mess up such an expensive phone so is it pretty easy to do?
w_2k20a:
I too want to be careful.
I have 2 phones, and my O2 Mini S is slow compared to my MDA Vario.
So I am going to try and run an update to replace the ROM on the O2 with the newer one on the Vario, and also get rid of the O2 add-ins which are what slow it down apparently.
I will try this first because I have read about so many problems with the latest I-mate one, and it is not easy to return to the original ROM if it does give problems (although it is possible it seems tricky) - I may the Imate one later if I need to.
The ROM for the Vario (along with others) is here:
ftp://[email protected]/Wizard/Roms/Tmobile/ - use password xda
Its the UK one.
But first I backed up my Mini ROM. I used awizard to do this. Read this thread:
http://forum.xda-developers.com/viewtopic.php?t=43399
I think that you will find that using the awizard (get it from this link)
http://forum.xda-developers.com/viewtopic.php?t=37386&postdays=0&postorder=asc&start=0
the backup part is easy. I have done that quite successfully.
Good Luck.
Good morning Everyone,
I was looking into information on updating my Cell phone ROM as after some reading and searching I found out that this phone is GPS capable (Why they would sell it with the functionality disabled is beyond me.) On the Official HTC website I did find a new update that was released 08/06/2008 at the following link. CLICKY! . I am wounder if anyone else is having a problem downloading this file and installing it? I receive an error saying the file is corrupt and I should download the file again. I have tried downloading the file from two separate computers, tried all three mirror sites (US, Europe, Asia) and last but not least tried using three different web browsers. Firefox, Internet Explorer, and Safari for Windows.
I am curious if anyone knows of another mirror site for this newly released update that is working? Or of another way I can update to the same version. I am unfamiliar with the ROMs that are on this website (I could figure it out but am uneasy about installing something unofficial.) Any help would be greatly appreciated.
PS: I also noticed that the file name "-HTC P4000 (Telus)-Telus_HTC_P4000_WM6_07252007.exe" Has an old date on it? I am hoping they just rebuilt a previous update, or they have not actually posted the new update and still have an old one which happens to not work. Just an observation I noticed.
PSS: I have sent in a technical help request through the online process of HTC asking for a link to a working .exe but I tend to find that out of the norm requests such as this do not turn out very well with corporations whose support team are really only knowledgeable in standard help desk things IE: I'm too stupid to turn on my phone can you help me?
Did you follow the instructions here?
http://www.telusmobility.com/on/business_solutions/htc_p4000_upgrade_xp.shtml
I did a while back and it worked. If not, just switch to DCD's, it's awesome. Telus's 6.1 ROM doesn't enable your GPS.
Ya that is currently the ROM I am running, Maybe I am just mixed up. I looked at the HTC website for the TELUS rom and noticed the date for release was 08/06/2008 so I was under the assumption they had released an updated ROM that was a newer version then 2.13.661.2 which I am already running. One that would also patch the GPS (just a guess). However, I guess I will look into the DCD roms and see if I can fumble through the guides to get it loaded. Thanks anyways.
telus p4000 rom
I have a P4000 running on DCD 3.2.2 and Radio 3.42.2 gps enabled internet sharing enabled and many other stuff... this is just roocking the place.. Just forgot the official Rom and go for dcd you just have to follow all instructions be aware and youll anjoye all youre gona do with your phone
HTC P4000 rocks again!
Being half way through custom install (with all nightmares and mistakes ) I found this official update too. Confirm too: everything works as expected.
Took a while for GPS to pick up in Richmond Hill, Ontario, but the it worked like a charm!
guig54 said:
I have a P4000 running on DCD 3.2.2 and Radio 3.42.2 gps enabled internet sharing enabled and many other stuff... this is just roocking the place.. Just forgot the official Rom and go for dcd you just have to follow all instructions be aware and youll anjoye all youre gona do with your phone
Click to expand...
Click to collapse
2nd that. Upgraded from the old v2 and now to this one GPS and everything worked great with Google Maps.. I didn't bother stopping that customization thing like I've read in other post. Loaded that HTC home Plugin v2.1 on it and its fine.
I realize this is probably going to be a simple fix. But after upgrading my ROM to the iphone 3.6 version (im running on a G3) some of the programs will not run. I get the not digitally signed message. I have tried to use regedit to make the change in some of the posts but even it wont run (same error). Just want to get rid of this security feature and be able to run what i want...... Any help is appreciated?
I get the same messages for all not standard programs (such as battery monitor and others) so that I would also appreciate if anybody could help us with this problem.
Regards,
Pavana
BTW, does anybody have a working link to the newest iPhone ROM from I3v5y?
First of all I would like thank Skywing for writing this GPS Application
Gateway for the xv6800 phone with stock rom or upgraded MR1 rom..
This thread is to show my thanks and to help new ppl like myself
find this app easer.. It took me about haft a day searching two forums
just to find what I was looking for .. so I hope this will help other
new ppl find what they are looking for much easer ..
Again this application was written by “Skywing” and someone wrote
the easy install CAB for his app .. also like thank “gc14“ for writing
the tutorial ..
This Application aGPS aka GPS Server aka (Valhalla Legends GPSServer.cab)
Will allow your 100% stock rom or MR1 rom on your xv6800 Phone
to access GPS signal via 3rd party application e.g. MS Live search, Google maps etc..
without the need to unlock the phone or do anything to the phone other than
simply loading the GPSServer.cab file ..
For step-by-step install info. go to: http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
To download the CAB go to: http://rapidshare.com/files/165096506/Valhalla_Legends_GPSServer.cab
Show your thanks to Skywing, go to his thread: http://forum.xda-developers.com/showthread.php?t=424387
I have personal testing this code on my xv6800 with stock ROM, then I
upgraded to the MR1 ROM from HTC for the xv6800 with WM 6.1 and
install the GPSServer.cab and it works perfect for both ROMs without
doing any unlocking or running anything else other then just the GPSServer.cab
BTW for anyone with the stock ROM running WM 6.0 and would like to
upgrade to Windows Mobile 6.1 .. you can download the MR1 ROM direly
from HTC
Again this is the, Verizon XV6800 ROM MR1
Release Date: 2008-08-23
go to: http://www.htc.com/us/SupportDownload.aspx?p_id=82&cat=2&dl_id=99
If this link does not work you may need to set your “country” first, (top right of the page “select country” set to “United States”
wow .. update: also found out that gc14 made the CAB file as well..
Thanks again gc14
gc14 post: http://forum.xda-developers.com/showpost.php?p=2625473&postcount=113
Thanks! It works very good with Google Maps
Is your WIFI works with WM6.1? After I installed MR1, my WIFI is not working anymore. I hope you might be able to help me.
TIA
to all that created this thank you, works flawless on the stock mr2 rom
can't get it to work..
Hi all! I followed this method a while back and had Google maps working great for quite some time! This past weekend I tried to use it with GPS and it couldn't find any satellites. I figured it was maybe too much cloud cover or other interference related to my location. Anyhow, yesterday I updated my XV6800 to MR2, installed the latest Google maps (3.0.0.12) and still cannot get it to find any satellites. after playing with the COM ports and location setting (currently COM4 and Loc ON) without success I installed GPS Toggle, which also cannot find any satellites.
Anyone have any suggestions to get this working again? Does this even work with MR2? I'd be happy to go back to MR1, though MR2 seems to be a little smoother and faster.
Thanks!
Bugsy68 said:
Anyone have any suggestions to get this working again? Does this even work with MR2? I'd be happy to go back to MR1, though MR2 seems to be a little smoother and faster.
Thanks!
Click to expand...
Click to collapse
Read the last couple of pages
http://forum.xda-developers.com/showthread.php?t=424387
thanks drewcam888. I'll check it out this afternoon and let you know how I make out.
BTW, I was looking around my device and I found a different version of gpsapi.dll (hidden) in the Windows directory. I'm thinking this may be the problem. It won't let me modify it though, as it's a system file. I can view it using SKTools, but not modify it.
Can you recommend a file manager program that'll let me move / copy / replace system files?
Thanks!
You can't modify a rom file or one that is created by the rom itself. Or at least I don't know how
Hello,
I'm pretty new here and new to the XV6800. I have a rom version that I downloaded from htc site that under device info reads 3.57.605.1 I don't know what MR1 or MR2 is or is mine an MR3?? Also I have a Radio version of 3.37.75?? My question is can I install this to get GPS or AGPS working on my device? Do I have to install a different radio to get it working?
Thanks,
Chris
cdeleoxda said:
Hello,
I'm pretty new here and new to the XV6800. I have a rom version that I downloaded from htc site that under device info reads 3.57.605.1 I don't know what MR1 or MR2 is or is mine an MR3?? Also I have a Radio version of 3.37.75?? My question is can I install this to get GPS or AGPS working on my device? Do I have to install a different radio to get it working?
Thanks,
Chris
Click to expand...
Click to collapse
Read the thread for a while that drewcam8888 lists above "adapter program to ......" and then make sure you change the registry settings as it describes for Valhalla in the posts from the past couple of days. I believe I posted #627 which has the places to edit for Valhalla. Listen to what others say to make sure you have everything right.
mine failed around the same time but using a different set of cab files which had worked flawlessly on both previous installs of MR1 . Is this perhaps something from verizon?....Anyway having not installed from a wrar file before how do you install the valhalla cab when the redirects disconnect from the server?
I have a xv6800 and i got it last week, the person that i got it from updated the rom. a couple days ago i cleared the storage, which i guess is a hard reset, but i wanted to know if that resets my Rom
thanks
Tyve
resets to a fresh install of your current rom. It removes all none rom files.
so do i hav to re-hack the rom to use google maps?
i have no idea wut im doing,
thanks
Yes you do
dang, that sux. thanks a bunch
my ROM version is 3.57.605.2 does anyone know if that is hacked or not?
Not it is stock verizon MR2
ok, do u know an easy way to hack it, im only 14 and i suk at hacking it