[BUILD]★09.29.2010★HyperDroidSenseV1.1★EVO★Hastarin# 4.1★F ast & Optimized,Minimalist - HD2 Android Q&A, Help & Troubleshooting and Genera

[BUILD]★09.29.2010★HyperDroidSenseV1.1★EVO★Hastarin# 4.1★F ast & Optimized,Minimalist★
Welcome to the HyperDroidSense: The Ultimate Sense Android Build for the HD2!​
Kernel version:
Hastarin#4.1 - Kindly built & optimized by hastarin (Check his thread for changelog and source code)
This is based on the latest Over The Air (OTA) Update for the HTC EVO. Thanks to phiredrop, mdeejay and mattc (1st EVO based builds I learned from) & myn for the Stock EVO OTA Update
First Boot Notes:
* First Boot will take about 20 minutes (or seem like it or longer) as the data.img is being unpacked.
* New EVO kernel uses the logo.rle in the initrd.gz (Black HTC Splash) that stays on while the Build "does its thing in the background"
* During setup, you may see that the "phone process" Force Closes (FC's) as a result of APN's now being Set during initial Setup
* If you rename the Buildfolder Android or anything else, DON'T FORGET TO CHANGE THE startup.txt OR ELSE you will not be able to boot properly.
If you don't like Sense, Feel Free to try my CM6 Based Build... The HyperDroid which can be found right HERE!
Features
* Deodexed
* Rooted
* Interactive and Powersave schedulers (Thanks to Hastarin)
* Perflock disabled (for underclocking via SetCPU) (Thanks to Hastarin)
* Market Fixed
* Zipaligned
* No Boot Sound
* Cool Blue Droid Eye to match the Rest of the Theme
* MattedBlues by Jabbawalkee Themed
Code:
Note: Due to its Bleeding Edge Nature, Some stuff may not work as you might expect.
Please follow the Bug Reporting Process I outlined on the thread.
Just to be sure, here it is right here:
How To File a Bug Report with Logcat:
Install android sdk
Install drivers for adb on PC
connect phone to PC
open cmd.exe
type 'adb logcat' without the quotes
start the app that causes the issues
wait for the app to close or get to the error
copy logcat contents and put in pastebin
copy pastebin links here
OR
Install "alogcat" from Market
Run it to get log until your Issue pops up
copy logcat contents and put in pastebin
copy pastebin links here
Before filing a bug report, please consider the answer to these:
1. Is the bug reproducible?
2. How do you reproduce it?
3. What is the expected behavior?
4. What actually happens?
5. Do you have a Task Killer running?
6. Are you on the default Kernel?
7. Did you restore using Titanium Backup?
Info Needed:
1. Are you using the default kernel? Y or N
2. If using a custom kernel are you loading the correct bcm4329.ko and tun.ko? Y or N
3. Are you using a fresh data.img created by the system on 1st boot? Y or N
3. Are you using the default Build Folder Name that came with your version? Y or N
What's New?
V1.1
- Fixed 3G APN's now set on 1st boot (Huge Shout Out to mdeejay, phiredrop and hastarin for helping me out here!)
- Added some Important Utilities like Term, GScript, etc.
- 240 set as default DPI
- ReadMeOrWeepInWinMoMisery Included
- Updated liblights latest fix by gauner1986
- Added Languages (Thanks for the tip mdeejay)
V1.00
- 1st Sense Build
- Fully Themed using MattedBlues + Matte Gray
- Using Hastarin#4.1 kernel as default
- Updated Maps
- Updated Street
- Updated Gmail
- Included Gallery3D
- Other tweaks and fixes
- Only English & Spanish languages Supported
Tips & Tricks:
Code:
Everything may not initialize properly on first boot. Reboot twice after the first successful boot.
Use all the defaults (including build folder name and kernel) before changing anything.
On First Boot, Install then Open Spare Parts and Disable Compatibility Mode to get Full Screen Apps in Older Apps that don't scale
Fully Charge while Device is Off before first boot, then upon first boot go to terminal and enter these (without the quotes) and press enter after every line.
su
rm /data/system/batterystats.bin
Ensure that Keypad Lights are on when Haret is launched.
Fixes:
To fix dialer from adding 011 every time a "+" precedes a number dialed, please refer to this.
Please read through the instructions on fixing the 011 bug... Its Right ABOVE THIS Sentence.
To get data working:
1. Go to Settings > Wireless & Networks > Mobile Networks > Access Point Names
2. Press the menu button and choose "New APN"
3. Enter your provider-specific information (Google for CyanogenMod APN as they have a whole list there)
4. Press menu and select "Save"
5. Press the radius button next to your new APN and you're good to go!
*Note: Data is quite picky on this build as its originally a 4G ROM and CDMA... If it doesn't work for you, then hopefully the next update fixes it.
The 3 Hyper Rules:
Rule#1 Please read & follow Instructions before reporting unknown bugs on the thread (Known Issues will not be responded to... If you're smart enough to load Android on your HD2, you're smart enough to search and read the stickied information) and not by PM... PM's will be ignored
Rule#2 If It can fixed, I will do my best to fix It... No Promises...
Rule#3 The Next Build will be released when its ready... No ETA's
Please Follow the Instructions:
1. Please read the OP... this serves as the README for this 1st build... next builds will have it included in the Zip.
2. Please Copy the HyperDroidSense Folder to the root of your SD card.
3. Run clrcad (to enable sound) THEN run haret (which will close the WinMo kernel and load Android).(OR do it Automatically by Using Exceller's Android Loader, which I highly recommend and use myself to Quad-Boot)
3. Wait about 15-20 minutes for the device to initialize
You want to use another Android loader? Simply rename the folder to Android and change the startup.txt to reflect the change... after booting successfully for the 1st time and letting the device "simmer" (e.g. "rel_path=Android")
Notes:
* Backup the data.img that comes with the build as creating a new data.img is NOT recommended
* If some apps don't look the way they should, download LCD Density app from market and change to default 240.
* The Blue Wallpaper may not be set by default... Go into /system/customize/resources and copy SPC_Wallpaper and set as Wallpaper using Astro
What's TESTED & working:
WiFi
USB Transfers (surprised it worked myself)
G-Sensor (Goodbye Freezing on PPP)
Bluetooth
GPS
Wi-Fi
PPP Data (3G + HSDPA)
LED Lights Notifications
What's NOT working:
EVOCamera Flash (kernel support is being looked into) turns pics with flash Black
Native Android Camcorder Crashes (Use EVO Camcorder instead)
4G and Sprint Specific Menus will NOT Work
Data (Out of the Box) does not work UNTIL you Manually enter your APN
Enabling and Disabling the Mobile Data Crashes the com.android.phone process (most probable cause is the CDMA origins of EVO builds)
Don't complain in the thread why any of the 5 things above don't work since its on the OP.
What could be working but has not been Tested:
MMS (Since I use WiFi only, I'm not able to test MMS Properly)
Wi-Fi Tethering (ditto)
USB Tethering (ditto)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
by Clicking the links below!​
V1.1
CLICK ME to Download NOW!
V1.00
CLICK ME to Download NOW!
Please DO NOT POST MIRRORS as I Want to Keep and Analyze the Stats. If you cannot Download from the Link above, let me know so I can Provide a Mirror.​
Latest Screenshots: MattedBlues by Jabbawalkee + Matte Gray Statusbar Icons by UltraLinx​
About this Build/Release:
In the spirit of the open source community, allow me to share and give back to something I enjoy participating in--- Tweaking my Gadgets to Death... yes, to death...
I am not a developer nor do I aim to be called as such. I believe this should be reserved for the real people who do the work behind the scenes and in the trenches of kernel hacking.
I am an extreme gadget enthusiast or simply a Gadget Geek... The work I do is to put together bits and pieces of what works and what looks good to create a gadget experience that is elegant, polished, minimalist and functional (E-P-M-F).
From my HyperROM WinMO ROM roots to today, I've always liked using and sharing a ROM that meets my E-P-M-F aspirations for a gadget. Today I bring you my personal twist on an Android ROM based on the latest EVO OTA Update (3.29.651.5)
Build Features:
1GB Data Image (included)
Latest Overclocked and Undervolted Stable Kernel by hastarin
Custom Modded Theme and Apps
Useful Tools/Utilities Included and easily updateable or removable
Changing Kernels:
Want to try out the latest and greatest kernels from GIT?
1. rename zImage to workingzImage
2. copy new zImage to "/HyperDroidSense" directory on the sdcard
3. copy bcm*.ko and Tun.ko to "/HyperDroidSense/root/system/lib/modules" on the sdcard (create the paths if its not there)
I sincerely hope you enjoy your HD2 as much as I have... Android has literally given my device a new lease on life...
Enjoy the HyperDroidSense for your HD2!
Code:
Props go out to the following:
for this excellent theme & mods used:
- Jabbawalkee
- UltraLinx
[B]for making all this possible:[/B]
- Cotulla
- dcordes
- darkstone
- danij3l
- gauner1986
- hastarin
- Cass67
- Markinus
- LeTama
- phiredrop
- mdeejay
- manusfreedom
- mattc
- zego
- ElBartoME
- shu8i
- cyanogen
- michyprima
- huanyu
- anyone else I've forgotten (silent contributors)
[B]for the learning:[/B]
-everyone on #htc-linux & #htc-linux-chat

reserved for later

reserved for later again

reserved for later again!

and again... of course

and another please...

last one... I promise...

pongster said:
last one... I promise...
Click to expand...
Click to collapse
i really need this one... to keep it more organized...

OMG, once again a perfect build from you? Thanks in advance. I'll download later as I'm going to work right now...
Sent from my HTC HD2 using XDA App

the tweaks and stuff could go here.. FAQ style

You are real awesome man ! Hey ...how about changing base for Sense later on to Desire HD ones ... are you thinking on same lines ?

v-b-n said:
You are real awesome man ! Hey ...how about changing base for Sense later on to Desire HD ones ... are you thinking on same lines ?
Click to expand...
Click to collapse
once it stabilizes and the next few OTA's are out after the release... yes

thanks for the new build! how's the speed on this? cm6 is so fast that i couldnt use sense anymore.

when will this be available for download ?

So this is a build for a future date? 9-28?

NickPP said:
So this is a build for a future date? 9-28?
Click to expand...
Click to collapse
thats what i was thinking, i hope he releases in a little tho lol i wanna test it out at school tommarow! but i shall be patient

i was hoping the same thing i wanna be able to dl before the site goes down for maintenance

I very like your build thank you

UPDATE: This short review is based on the release prior to releasing it to mass public. At this time, Pongster has only release to testers to ensure everything is working perfectly. A link to DL this build will be posted shortly.
---
Can't wait to try this build. I'll do a report soon.
Just Tested:
0) Use the stock data.img after extracting the folder.
1) Music does NOT studder like in Mattc's 1.0.1 evo build. I love music. It's a high priority.
2) Speed: It's fast and speedy and on par with the 1.5 hyperdroid build, however, though it chokes here and there more often.
3) Stability: Yet to confirm, but its stable so far for me. No crashes yet. Jayy got a "acore" crash. Poor you.
4) Quadrant scrore was at 1682. Nick got scores at 1700+
5) Upload and download speeds via wifi: 5.3Mb/p and 3.7Mbp/s It's good enough for me for regular browsing wifi.
**6) the stock 180dpi is very bad. everything is misaligned. i already confirmed with 3 other people (jay, nick, and robert). You must revert back to 240 for the best alignment, but for a working one, 200 "almost" fixes it.
Good build so far. but has a bit of improvements to work on.
I like the speed of it so far though

just waiting to dl another build of yours..
thanks for your great work

Related

[ROM] LS 2.1 - Only the best for your Liquid! Eclair 1/8/10

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL ENGLISH TOPIC: http://android.modaco.com/content/a...-only-the-best-for-your-liquid-eclair-1-8-10/
OFFICIAL ITALIAN TOPIC: http://www.tuttoandroid.net/forum/ls-2-1-i...8-10-t3873.html
Lain & Suxem are glad to present their new ROM... LainSuxem 2.1!
SCREENSHOTS
.
.
.
.
.
.
.
.
This ROM for Acer Liquid S100 and Liquid E, has been created with a selection of the best ROM, LEAK and DUMP available today, adding powerful hack/scripts and an useful app to manage the ROM itself and get power, fluidity and a long battery life.!
Bugtraker
If you have any problem with the ROM, report it with the button "New Issue" in this page: http://code.google.com/p/lainsuxsem/issues/list
Thank you
VERSION 2.1
DESCRIPTION
- App LSsettings: Manage every side of your ROM in a simple and intuitive way (with a widget)!
Touchscreen sensitivity
Apps2SD
Themes Manager
Choose your camera app
Choose your faster net or come back to default settings
Backup SMS/MMS
Discover the free space in every partition of your ROM.
Other
Click to expand...
Click to collapse
- The ROM starts with preset settings for every app it contains, it's ready and optimized to use it!
- Based on the Liquid Ferrari's leak + bin 09's framework
- SMS App is fast and improved (SMS fix!)
- Phone App and Phone Book are faster and improved
- Wifi Tether
- Audio hack
- New libwebcore.so for a faster browser
- Touchscreen sensitivity increased
- Pack to OC kernel (880 mhz, 920 mhz, 998 mhz)
- Wi-Fi is more powerful
- It contains two camera apps, the default one and the awesome one took from the stream's dump (720x480).
- Many optimized gadgets: launcher pro, htc_ime v27, fancy widget, voice commands, froyo gallery, and many more;
- EVERY app has been updated
- Many useful apps pre-installed:
Barcode Scanner [Discover what's behind a barcode] {data}
Dolphin Browser [Internet at the speed of light!] {data}
Comandi vocali [Use your Liquid without hands] {data}
Dialer One [Calls and contact handy, anytime you want] {data}
ES File Explorer [Browse your phone] {data}
ES Task Manager [Close useless apps to increase phone's performance] {data}
Facebook [The app for your favourite social-network] {data}
Fancy Widget [Your city weathercast with a great widget!] {data}
Handcent SMS [Perfect management for your messages] {data}
kPL [Find your phone if it's lost!] {data}
Liquid Tether [Surf the net with your pc using your phone WI-FI] {system}
Media Server [your media contents available on the net] {system}
MusicMod [your music handy, anytime you want, with a beautiful widget!] {system}
Notes [Take notes and set reminders] {system}
Quick Boot [Reboot your phone in a flash] {data}
SetCPU [maximum control of your phone] {system}
YouTube [The best videos of the net on your screen] {system}
Other system's apps [Calculator, Calendar, Contacts, Email, Camera, Gallery, Gmail, Google Talk, Local Settings, Market, Messages, Clock, Voice Recorder, Alarm, Voice Search]
Click to expand...
Click to collapse
- Many stunnin' apps saved in your SD ready to install when you need them:
TitaniumBackup [Save and restore apps and settings]
CorpCal, MotoGAL, RS [For your company]
DTG [Open, customize and create office files on your phone]
Androidterm [The shell on your display]
NemoPlayer [The default liquid's player]
Cmplayer [Play dvx and other extension on your phone]
Click to expand...
Click to collapse
- Optimized System (zipalign, deodex, other) (100mb RAM at boot-time, 150mb OF FREE SPACE)
- Voice [Search Engine / Write Tool / Commands]
- Improved boot.img (ramzswap, TS fix)
- new live wallpapers added:
MagicSmoke
OceanWaves
DroidX
Aurora
BlueSea
Dandelion
Luminescence
Click to expand...
Click to collapse
-Many themes ready to install using LSsettings (Ls_Themes_pack is required):
Stock theme (included into ROM)
B_Elegance
Galaxy
Green_Android
NexTang
Smoked_Glass (edited by me - included into ROM - default theme)
Click to expand...
Click to collapse
- Ads Blocked
- Additional medias from the liquid ferrari's leak in /sdcard/LainSuxsemTools/audio
- Awesome boot image and animation
- Folder /sdcard/NOMEDIA to exclude medias from gallery and media player
- New xbin e bin script, updated lib and new busybox
- Extreme fluidity, Rom faster than light!
- A lot of fixes and much more! (multitouch, perfect 3g, APN list updated, Auto Brightness, much more)
INSTALLATION GUIDE
1) START HERE IF YOU JUST BOUGHT THE PHONE:
- Download and install usb drivers for your phone: http://global-download.acer.com/GDFiles/Ap...&SC=EMEA_27
- Flash a recent bin (I suggest the 39 'cause it has an updated baseband); you can download it from here: http://tinyurl.com/34tq4yp; somone else suggests the 09... you can download it from here: http://global-download.acer.com/GDFiles/OS...amp;SC=EMEA_17)
- Afer following the instructions you'll have an up to date bin.
2) START HERE IF YOU'VE GOT AN UPDATED ROM BUT WITHOUT MALEZ RECOVERY
- It's time to install the malez recovery
- If you didn't, install your USB drivers now...: http://global-download.acer.com/GDFiles/Ap...&SC=EMEA_27
- Download the malez recovery 0.5.4: http://www.multiupload.com/402AVV1SI9
- unzip the archive and click install-recevery-windows.bat while your phone is ON
- Your phone will reboot several times during this process
3) START HERE IF YOU'VE GOT AN UPDATED ROM AND THE MALEZ RECOVERY
- Almost done...
- Download ROM LS 2.1 (you'll find the links below)
- Connect your phone to the computer, activate the date-exchange by usb (once you've plugged in your phone a notification will appear, tap it)
- Copy the downloaded file in the main directory of your SD Card (Without extracting it) [Please Note: You've to copy this file in the MAIN DIRECTORY not in a sub-folder]
- Reboot your phone in recovery mode (If you did pass trought 'point 2', you'll find, in the malez recovery's pack, the file "reboot to recovery.bat" doubleclick it with your phone plugged in by usb, if you didn't, well, its better to download it from the point 2 or from this link if you're to lazy to scroll the page up: http://www.multiupload.com/402AVV1SI9 .
- Once you're on recovery's main screen you'll have to move through its menu by Volume UP/Volume Down buttons
- Go to "Flash/Test menu" and press the MENU button (the last touch button of your acer liquid, the one with three stripes)
- Press Menu once more
- Go to SDCARD:LS2.1 and press MENU
- press HOME (bottom left) and wait for the process to end
- Once this installation ends press BACK (the "<" button) to go back to the main menu, then press MENU to reboot your phone.
- If you want to delete added aps (the ones in /data) and to have a clean ROM it's the moment to do a "Wipe Data Factory", obviously the widgets of the removed apps won't work and you'll have to delete them from your home. I suggest to keep them cause they're very useful.
4) START HERE IF YOU ALREADY INSTALLED THE ROM LS
- Congratulations!
- The first boot will last a bit more than the usual, don't worry.
- Once you're phone is on, select your language and follow the setting wizard
- Once the wizard finised go to the apps menu and open LSsettings
- Here you can set the touchscreen sensitivity and many other things
- If you'd like to install the theme pack or an OC kernel (if you don't know what an oc kernel is don't install it, you don't need to); you'll find links below; every pack has got a README file explaining how to install it
- Tip: select HTC_IME keyboard by holding a textbox
- Once you've set the ROM reboot your phone.
- Now The ROM LS is installed and ready to use! Have Fun!
NOTES
- Once you've turned on your phone, tap the taskmanager widget to end every app you dont need
- Don't WIPE your phone after the installation or you'll lose every added app. If you accidently wipe it, simply re-flash this ROM.
- App + Data on SD may causes really problems to the system. Please, choose app on SD only
IF YOU NEED MORE INFORMATION, SIMPLY ASK HERE! WE'LL BE HAPPY TO HELP YOU!
PLEASE, We use tools to count our downloads, Don't upload this release on other mirrors, THANKS.
NO WAREZ, NO MALWARE, NO CRIME....JUST A SUPER ROM!
http://www.multiupload.com/SI74ZCREAK
http://www.multiupload.com/84OZHBOMCN
http://www.multiupload.com/PALFRSI315
http://cli.gs/DonateSuxsem
https://www.paypal.com/cgi-bin/webscr?cmd=_...d=KG2F29MFNSQX2​
*SPECIAL THANKS TO*
(All permissions have been requested to the authors with an MP by "conka20" user)
-LS team
-Suxsem: developer
-Lain: apps selection
-foreman: unix support
-Frapasce: translations
-yann73: economic support
-forum tuttoandroid: support, testing and fun
-leo: Liquid Ferrari's Leak
Click to expand...
Click to collapse
-malez: part of scripts and wifi optimization
-xian: part of hacks
-phh: kernel
-gengaro86: wifi tether
-xaueious: v8 webkit
-D3StRoY: B_Elegance theme
-modaco e xda forum: Two big ROM sources
-You: To have tried this rom!
I will have forgotten 90% of people have contributed to this rom...the changes are really too many to remember them all...
If you think you have contributed to the ROM please REPORT IT TO ME and i will add you to special thanks.
If you want your link next to your name REPORT IT TO ME.
We are at your service
And what about that awesome orange theme, that we had in LS 2.0?
it's "NexTang" theme... you can find it in LS 2.1 THEME PACK
Thanks Suxsem
I faced with one small but very distressing problem. During typing SMS message I pushed Erase button several times and quickly. As result - a message receved by itself unfinished.(It happened again when I tested if i was wrong)
I newer saw this problem in LS 2.0. What's wrong with this one?
I have Acer Liquid E..
If I using this ROM, any problem???
and I need stable rom..
Now, I'm using LCR 1.8..
Some fitures like application on Acer Liquid E.. example: Camera, etc
Do you have it???
sry for my english
Ramdanih said:
I have Acer Liquid E..
If I using this ROM, any problem???
and I need stable rom..
Now, I'm using LCR 1.8..
Some fitures like application on Acer Liquid E.. example: Camera, etc
Do you have it???
sry for my english
Click to expand...
Click to collapse
Don't be sorry for your English, at least you try and we understand you just fine
I am using this ROM and have been since the release and it's as stable as they get. I recommend it my friend!
It does have Camera app.. was that your question?
hi Lain & Suxem this rom is really fast and stable,
there is a way to enable compcache in this rom at boot ?? or tiny swap??
thanks and really appreciate your hard work!!!
for me any overclock kernel broke compcache!!!!!!!!!!!
can someone help me?
I like this ROM...!!!!
thx suxem..
Sorry, double post..
my internet is slow..
the best work i've seen for an android phone !
themes apps overclocking.... everything sounds perfect
the only problem i am having is with launcher pro ! i have the app for the plus version and i cant install it with astro or any other file manager !
any solution for this
you use the unlock launcher pro plus from the preferences
if your trying to use an older version that you downloaded then not much i can do to help with that
i tried and its asking for a paypal account !!!!
yes
you understand that launcher pro plus is something you have paid for??
meaning that if you didnt pay for it you wont be able to unlock it?
that is not a bug and if your trying to get the pro version for free - that is why the app maker changed the way the pro version works and is no longer a seperate apk
so you cant steal pro anymore
pay for it or stop whining - its not a bug
i already paid for the app and i have a backup of the paid apk... thats why i want to use it and not pay for it again ... hope u can understand that
thanks for your work again..... but u have to work on your people skills
- App + Data on SD may causes really problems to the system. Please, choose app on SD only
how cn I use app on sd only?pls tellthanks
thanks man. i contacted the developer and he fix my account issue
still i think this is the best and most complete work for an android phone
yaseramin: open the LS program in the menu. choose APP2SD
Does the LS2.1 support Chinese language???
Hiya... I'm just wondering if this rom will support chinese language overall n is my current rom (Acer_LiquidE_1.100.09_AAP_GEN2) compatible to this? Beside, will it be possible to return to the stock rom afterward?
Much appreciate for your effort on this LS2.1 and looking forward for your advise, thx~
Question about swipe and voice to text...
Hi there, first thanks Lainsuxeian for the amazing rom, speedy and beautiful.
Now question - for member here, does this rom has swipe as in slide your finger on keyboard to type a word? cause I can't seem to activate it.
Question 2 - Does the voice to text work? the icon is in the keyboard. however when i touch it, nothing happend.
Question 3 - Has any1 overclock their phone yet? which 1 is best in your opinion, stability? 880? 920? or 998? ....since they lainsuxian post 3 option, that's suppose to work, i'm still a litto affraid so i am asking every1 in here to see how their is doing, about 5 vote is good, thank you very much

[ROM] VEGAn-Tab Build, BETA 5.1.1 w/supplement (updated 02/12/11) Froyo

***ATTENTION IF YOU ARE COMING FROM A 4349+ STOCK ROM or MOD based off that PLEASE VISIT THE FOLLOWING LINK TO DOWNGRADE YOUR BOOTLOADER AND TNT VERSION BEFORE FLASHING CWM AND THIS OR ANY OTHER ROM****
http://forum.xda-developers.com/showthread.php?t=1036956
LINK TO NEWEST DEVELOPMENT: VEGAn-TAB GINGEREDITION: http://forum.xda-developers.com/showthread.php?t=1031250
VEGAn 1.00 beta 5.1.1 supplement - Thanks Roebeet for staying on top of it!
Link: http://www.mediafire.com/?jhq1cnu5wgkg3j5
md5sum: 7f3920a3ef2dabf264bfc8550d8f6d00
List of fixes / enhancements in this supplement:
- Maps 5.1 with the rotation fix
- Market 2.2.11
- Updated drivers that should bump up Quadrant slightly, and significantly improves Nenamark scores
- Frame rate change from 50 to 60
- Replaced the Froyo keyboard with the Gingerbread keyboard
- Added Adam Sniffer app, and their keyboard as an option
Quick instructions: This is a supplement, not a full firmware. You would run this like any other update.zip, but since the changes are small you shouldn't have to wipe data. You'd want beta 5.1 as your baseline, before running this, download link is further below for the full install of beta 5.1.
I know that the VEGAn users probably haven't been "feeling the love" the last few weeks, so we wanted to at least bump you up to some of the latest changes ported to TNTL. I have been plugging away hard on CM7 and VEGAn-TAB GingerEdition and rothnic's expertise with a lot of the these enhancements are the reason why they exist right now. The Nenamark bump actually originated from our Adam testing, believe it or not.
As Per usual USE THIS ROM AT YOUR OWN RISK. We highly recommend clockworkmod recovery as a pre-req. We are only testing for cwm users.
I would also recommend a full data wipe between updates, at least for now when we reach STABLE RELEASE stage this may not be always necessary. There is a great tool out there you can use if you don't know about it already called Titanium Backup it is on the market and there is a free version. It allows you to backup/restore all your apps and even save/restore data for those apps... the only caveat I will say is do not restore any system apps (ie. apps preloaded with our roms) this can cause issues.
****The First Boot after installing BETA 5.1 will take a few minutes to catch up and will feel "laggy" this depends on how much media you have on your device for it to scan in the first time****
**If you are having issues with the new market telling you you don't have enough space to download then your SD Partitions are incorrect and need fixed** -Boot Clockworkmod, select advanded, then partition SD, 2048 for first option, and 0 for second. process will take ~10 mins ******WARNING THIS WILL DELETE EVERYTING ON SDCARD (internal) MAKE A BACKUP!!!!******
Now that we are nearing a STABLE Release here are some new links you may not be aware of:
Build URL: http://vegantab.gojimi.com/
Downloads section: http://vegantab.gojimi.com/downloads
ON TO THE ROM:
***UPDATE***
1.0.0 Beta5.1 Link: http://vegantab.gojimi.com/download/gtab.VEGAn.1.00.beta5.1.user.final.zip
md5sum: a01171d77f25444088ecc884c793d105
This is an update.zip formatted file. You'd run this like you'd run any other update.zip file.
-----------------------------------------------
ONLY DO THIS IF YOU DO NOT CARE ABOUT G-SENSOR BEING RIGHT FOR MOST G-SENSOR GAMES & WOULD RATHER HAVE MOUSE SUPPORT BACK -- *****PATCH TO REMOVE G-SENSOR FIX AND RESTORE MOUSE SUPPORT***** - ONLY INSTALL THIS AFTER BETA 5: http://vegantab.gojimi.com/download/patch.VEGAn.BETA5.remove.Gsensor.zip **Flash this like you do the roms in clockwork**
This is a collaboration between myself, Roebeet, and Rothnic - The G-TabDevs Team.
BETA 5 changes:
* NEW KERNEL **Thank you Rothnic** We have compiled alot of new features in to this with more on it’s way at some point.
* LAG on WAKE FIX! woo hoo! no more laggy tablet after sleeping.
* CIFS support (allows mounting shared folders over a network) – search CIFS in the android market for apps
* NTFS support (this gives us the ability to mount drives formatted NTFS which is popular on Windows machines…. Larger File Support)
* Ethernet on DOCK Support (This will only work right now if the device is booted while connected to the dock to activate the port)
* ***UPDATED EVEN BETTER****G-Sensor Fix (this has been long awaited by many! Fixes most games that use the g-sensor for controls, etc.) **this is a DIRTY FIX but it works… only issue is it does mess up mouse usage… so if you are a mouse user and don’t care about the g-sensor being right for games there is a patch below that you can apply ***AFTER*** you install BETA 5.
* REBOOT OPTION has now been added to the power menu. Remember that popup menu is a scrollable menu so if you don’t see it all use your finger and scroll on down!
* I increased the DELAY for the LONGPRESS Power button to bring up the menu… it is now a full second. This has dramatically decreased the number of time the power menu has accidentally popped up when trying to wake the device.
* Added the Tablet Compatible Stock Calendar that I dropped on you guys at Christmas on the Website.
No Major theme changes, nor some of the other fixes that I have been having issues with. The next release should include those. This is the LAST BETA I believe. The next release will take some time so settle in for a bit while we work on Release Candidate 1.
-------------------------------------------------------------------
Benefits to us
- Soft buttons, like TnT. But no TnT UI layer getting in our way. So, for example, keyboard replacements should work.
- Just as fast as the new builds we have if not FASTER.
- Vega build has a bootup script where we can install user-based apks, after a data wipe. So, for example, Flash is now added to the build.
- Vega firmware development is probably more active than the official TnT development, at least from the little I've seen so far (though TnT have been fairly active lately).
Known issues
- Videos are not being automatically scanned on the EXTERNAL SDCARD.
*****FIXED**** Weird orange bar is showing up in the stock Calendar app *****FIXED****
- The newest Market apk seems to have issues with any device that's been re-partitioned outside of the default of 2048. The "fix" is to re-partition your SD back to the default of 2048, in clockworkmod. Thanks to proengin for informing us of this.
Changelog
- (a2) We are using alpha1 as our "base" image, and then a modular format on top of that. So, alpha2 is a full update.zip package.
- (a2) VOLD should be fixed using a hack. 30 seconds after bootup, SDCARD2 should start working. Or, it may not work. It's an alpha.
- (a2) Vega user apk script has been added, which is supposed to add Flash on a newly wiped system. But it's spotty at best.
- (a2) Camera should be fixed.
- (a2) We're deleting some of the unneeded system apps like Twitter, Facebook, the Htc stuff in gapps and talkback. You can always add these back via the Market. The reason is to keep the image a little cleaner.
- (a2) Audio fix added.
- (a3) Added changes to the framework for smaller status bar and VEGAn boot screen.
- (a3) Added Gingerbread keyboard.
- (b1) SSL bug fixed. Also, added the latest YouTube and Gmail apps. Removed the user apk script for now, as it's really buggy.
- (b2) VOLD post-boot replaced with a mount commend. Should be more stable and might fix the disappearing apps, I hope. New Gmail, adhoc wireless support added, adfree hosts file removed (get "adfree android" app in the market to get it back), removed the Phone apks which should improve battery life.
- (b3) Mounting issues should be completely corrected, audio issues are corrected, new rothnic theme added, new Gmail and Voice apps, new Settings app with advanced Wifi (and policy is set to "never sleep" by default).
- (b4) A New Cleaner Base System Image with the addition of files from new Advent Vega Release (we can finally get rid of the hacked together Image That I originally created for VEGAn)
- (b4) New Kernel (from latest unreleased TNT Update kernel version #15)
- (b4) New Boot Logo(replaces G-Tablet on white background)
- (b4) New VOLD Binary and MediaProvider(allows media to be seen from External SD Card as well as internal)(videos are not being automatically found on SDCARD2 ATM I am working on that)
- (b4) Settings app no longer has Call Settings option or mobile networks as it is not a phone
- (b4) New Market (We have got it showing even more apps... but still not all. Still need to do the market hack.)
- (b4) Some Graphics and Performance Improvements reduces video tearing issue among other improvements (G-TabDevs Performance Pack)
- (b4) New Music Player(pulled the one from CM6.1 and got it running on VEGAn)
- (b4) framework laid for bluetooth HID(not sure if it is fully functional yet please let us know if it work for you)
- (b4) laid the framework for POSSIBLE OPENVPN support(not fully functional yet sure if I can get it to work yet)
- (b4) New Theme Improvements - Switched to a more Cyan color highlights (the previous green may be available as a small update at a later date.
- (b4) Flash now auto installs on first boot up usually after about 15 secs so the tablet can finish booting
1.0.0 Beta 5:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------------------------------------------------------------
Archives:
1.0.0 Beta3 Link: http://www.mediafire.com/?tt3n3njojetnscx
Alternate link: http://www.megaupload.com/?d=3KJ799TZ
md5sum: fea915609ab56aa233fabcfff3bcc2a3
1.0.0 Beta2 Link: http://www.mediafire.com/?c9a1c11zz1wgza9
Alternate link: http://www.megaupload.com/?d=MKKNTZP1
md5sum: 1b16d0cf7f02702a6796914195d8339b
1.0.0 Beta1 Link: http://www.mediafire.com/?5hr09gj53ut1208
Alternate link: http://www.megaupload.com/?d=Y9NR34AD
md5sum: 2906ed4fd5ae4fc1954b7b5e766f1507
1.0.0 Alpha3 Link: http://www.mediafire.com/?tzhc7vtstdl128x
Alternate link: http://www.megaupload.com/?d=9SPCOMPY
md5sum: 148a7bf52458cbedc9d859e91281a6c8
1.0.0 Alpha2 Link: http://www.mediafire.com/?bdurosaclrp4r3i
Alternate link: http://www.megaupload.com/?d=H264QQRH
md5sum: 2541fccfb01fb8b398fc38beaa5b3355
1.0.0 Alpha1 : http://forum.xda-developers.com/show...5&postcount=57
Stuck thread
I hope you have a lot of bandwidth on that server, gojimi, because you're about to get hammered. Might want to consider uploading through multiupload.com, the service roebeet's been using.
Downloading and getting ready to flash here, btw.
Downloading now! thanks for all the fast updates!!
Thanks for the hard work!!!!!! Downloading now
Ahh! didnot bring Gtab to work !
Will D/L after work.
Thank you Santa Clause ('s)
LOL.
And I just got done loading up the new latest VS ROM. It's much better, but it still ain't Vegan.
Oh well, I got no problem swapping out ROMS. Thanks for the hard work guys.
Thank You!!Just updated then did the TnT Kb + Live WP + Gapps..Formatted SD 2048 / 0 ..Did Market Fix and Im In....
Love the new Image instead of the gtab image.....
Can't decide on the bios or this boot logo..
Quadrant 2463
Thanks Again!!
looking sexy downloading now!!!
Is there any way to have the Home button bring up the launcher instead of the Clock app? Or am I experiencing a unique issue?
HID Testing
How do I enable the bluetooth HID? I am trying to connect to my keyboard, but I don't see any option for it?
It does bring up the generic message to try "0000" or "1234" however it did not work, or do I mis understand? is this something I need to do at the command line hidd --connect etc?
Everything else seems to work great, at least what I have tested.
Thanks !
Wiped everything before install. Runs well, but noticed a few issues.
First, my power button stopped putting the device to sleep. I could hold and get the shutdown menu. Reboot fixed this.
Second, if you use the lock screen feature and try to log in before the device finishes starting up (after a power on or reboot) the touchscreen becomes unresponsive. You have to hold down the power button for 10 seconds to force shutdown. Noticed this with beta 3 as well.
Third, hacked TSCalibration doesn't appear to be proloaded to find INI file on root of /sdcard instead of /sdcard2.
Seems great other than that!
So far so good! Wiped data, cache, and dalvik then installed. Got TB and restored my Pro license, then selected apps with data (no system data) to restore. Entered in Gmail account, tested Market. Applied Swype install/hack and rebooted. Running smooth, Quadrant in the 2400+ range.
The only problem I have is I can't sync my Facebook account under Accounts. I don't need this per se, but I'd like to have them.
-=Sent from my Droid 2 (Fission 2.4.3) using Tapatalk=-
schauerd said:
How do I enable the bluetooth HID? I am trying to connect to my keyboard, but I don't see any option for it?
It does bring up the generic message to try "0000" or "1234" however it did not work, or do I mis understand? is this something I need to do at the command line hidd --connect etc?
Everything else seems to work great, at least what I have tested.
Thanks !
Click to expand...
Click to collapse
I wasn't totally sure I had bluetooth HID licked this round or not... I don't have a bluetooth keyboard to test with... looks like we are part way there maybe by the next build we'll have a better understanding of what needs done.
ehunyadi said:
Is there any way to have the Home button bring up the launcher instead of the Clock app? Or am I experiencing a unique issue?
Click to expand...
Click to collapse
Ehunyadi: you are one of only two people experiencing this issue. I would like to know what the model number of your tablet is. On the back starts with UPC3*** etc. It seems this may be linked to a specific run of devices but we are not sure. Let me know so I can track down the root cause of this.
gojimi said:
Ehunyadi: you are one of only two people experiencing this issue. I would like to know what the model number of your tablet is. On the back starts with UPC3*** etc. It seems this may be linked to a specific run of devices but we are not sure. Let me know so I can track down the root cause of this.
Click to expand...
Click to collapse
Model: UPC300-2.2
ehunyadi said:
Model: UPC300-2.2
Click to expand...
Click to collapse
I have the same model number and my home buttons work fine.
Thanks for the response !
ehunyadi said:
Model: UPC300-2.2
Click to expand...
Click to collapse
Now that's weird... I guess it is not model specific then... It seems like something is telling it the tablet is docked when it clearly is not. Just to clarify did you do a full data/cache wipe in Clockwork Mod after installing BETA 4?
Just trying to run through the troubleshoot list.
Was loudness increased? Seems louder. Also seems a tad quicker.

[03 JAN] Jaws-MIUI base on MIUI 31-12 [Kernel: Hastarin 8.6oldcam by tytung]

This is my first try to make a nand build, thanks to OCM for passing the knowledge and giving permissions for his kernel and initrd.gz
base on : MIUI 31-12-10
Kernel : Hastarin 8.6oldcam by tytung
Whats working :
* 3g/HSDPA
* keypad status notification
* Bluetooth
* USB mass storage
* G Sensor
* Facebook sync
* Camera/Camcorder
* Wifi
* GPS
* FM Radio
* Theme Manager
* RMNET
Whats not working:
* Tethering & Portable Hotspot (lack of kernel support), click here for third party app
* Bootanimation cannot be change by theme manager (other theme element works)
* Can't login in to https from app (zynga poker, World War, SwiftFTP etc), known MIUI bug since 2412
Download 02-01 update1
Click Here Please
Update boot.img
Click Here Please
you must reflash to update boot.img
======================================================
Download 02-01
Click Here Please
bootloop fix thanks to RaiderX303 , some people still report bootloop, use method below to fix bootloop .. arrrgghhh
edit : WTF..the changes i made in init.rc didn't save, thats why there is still bootloop, sorry guys..
Need Test : Bootloop fix
Download here
put this file inside JawsNand31-12 folder (replace boot.img in that folder)
Tips :
- Use paid Titanium Backup to move all user app to SDCard so you will not running out of internal storage space..
- for Wireless tether use Wireless Tethering Apk
- for USB tether use Wired Tethering.Apk
- I forgot to change Camera.apk, default Camera has no custom Video quality setting, but camcorder does work, for anyone has problem with camcorder and want to change video quality please Download here, push it to system/app or use DroidExplorer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
eh, btw..this build is default from MIUI, none of the picture element changed, to make this build like the screen shoot, use EliteProHD theme, Minimalistic Text and System info widget
ISSUE :
since MIUI release date 18-12 there is bootloop issue in HD2 port, futureshock tell me what causing it, i tried to fix it but some user still report bootloop, so while i'm working this nand build, i found a fix, but it will take some work for your self, since this fix must be done on bootloop, in next stable release perhaps i can make this fix automatically .. i need some info how to edit some init file and make chown command run while on firts boot..
so here you go (for windows only) :
1. you need android SDK, so you can do "adb shell", download here, download USB driver from there or you can or download here (you still need android sdk to run "adb shell")
2. boot Jaws MIUI, then connect your HD2 to PC, it will ask driver, point it to USB driver you have download before..(if you have install driver correctly it will look like picture 2)
3. while your HD2 still bootloop, and windows has finish installing android HD2 driver, run command prompt (click start - run, type cmd, click ok)
4. navigate to where you save android sdk files, mine is D:/Android-SDK, so to navigate to that folder u have to type this in command prompt (look at picture 1):
C:\Documents and Settings\LESJAW>d:
D:\>cd android-sdk
D:\android-sdk>cd tools
D:\android-sdk\tools>adb shell
# chown 1000.1000 /data/system
5. it will finally end bootloop and take you to home screen
Picture 1
Picture 2
remember do those step while your android is bootlooping..
======================================================
Old release..
Download 01-01
Click here please
=====================================================
Download 31-12
Click Here Please
====================================================
NOTE!
1. Update1 u don't have to edit build.prop, its rmnet, dns update automatically
2. U can used your previous data, when MAGLDR prompt you, don't erase previous data
3. For initial release : u must edit build.prop file and change ppp0.net.dns1 and dns2 to your own provider DNS, default DNS is my provider.. otherwise you will have no data
thanks to : Cotulla - for making all this possible, rajko, ocm, dan1j3l, LeTama, hastarin, huanyu, michyprima, Cass67, darkstone, ElbartoME, gauner1986, Geo411m, mattc, memin1857, NetRipper, MIUI-DEV, XDA-DEVELOPERS,MIUI.com (the Rom) .. sorry if i forget mention ur name..
Change log :
Code:
3-1 Boot.img
- change boot splash screen
2-1 update1
- update language pack to 1c
- fix MIUI Music FC when entering setting
- change kernel to Hastarin 8.6oldcam by tytung to fix Camcorder FC on some people
- [B]Fix Bootloop[/B]
2-1
- base on MIUI 31-12
- [STRIKE]fix bootloop issue[/STRIKE] (i test this by flashing almost 10 times)
1-1
- change kernel to Hastarin 8.6 by OCM
- rmnet connection data (universal now)
31-12
- initial release
DONATION
@reserved for future update
Ill be trying this soon, i love MIUI builds, hows the speed compared to SD card versions?
Thanks buddy will be the first to try, I have the Cotulla NAND version done how do I go by installing the MIUI version over this one?
Any screenshots?
thanks, i'll try
wow
is overclocking possible ?
scbrother said:
Ill be trying this soon, i love MIUI builds, hows the speed compared to SD card versions?
Click to expand...
Click to collapse
hmm..i much more prefer this nand feel more speedy..just my feelings perhaps..
316racing said:
Thanks buddy will be the first to try, I have the Cotulla NAND version done how do I go by installing the MIUI version over this one?
Click to expand...
Click to collapse
you just replace it, like the way you install cotulla nand
OmSoft said:
Any screenshots?
Click to expand...
Click to collapse
same with my sdcard build, need no screen shot here
BoneMo said:
is overclocking possible ?
Click to expand...
Click to collapse
i havent test it yet..
hows the battery life on nand?
316racing said:
Thanks buddy will be the first to try, I have the Cotulla NAND version done how do I go by installing the MIUI version over this one?
Click to expand...
Click to collapse
I think it`s only one way - to install stock WM 6.5 and after that you can install new Android rom, am I right?
For Example: If I try to boot in magldr to it`s menu - there is nothing will be, but only auto launching Android. It cant be stop.
Just tried another way: HD2 was connected with a cable to PC, reboot, long pressing key for magldr after it`s show up (with auto-launcher android I think) -> then menu has been shown!
How to increase internal phone storage?
Is there anyway to increase the internal phone storage just like we did previously in sd card install?
The internal phone memory sucks in nand versions and we cant install more apps.
anybody has any ideas?
thanks.
lesjaw said:
same with my sdcard build, need no screen shot here
Click to expand...
Click to collapse
Well it makes the topic more complete, I have never personally tried or visited teh SD card version so saves first time users of your build having to go and locate your previous release just to see screens.
is there anyway we can install the apps directly in to sd card?
TheATHEiST said:
Well it makes the topic more complete, I have never personally tried or visited teh SD card version so saves first time users of your build having to go and locate your previous release just to see screens.
Click to expand...
Click to collapse
ok..maybe tonight i post some screen shoot
thedent555 said:
Is there anyway to increase the internal phone storage just like we did previously in sd card install?
The internal phone memory sucks in nand versions and we cant install more apps.
anybody has any ideas?
thanks.
Click to expand...
Click to collapse
patient bro..that day will come..data2sd, app2sd, cache2sd etc
Thanks for your work! I'm trying to flash your Rom.Can't wait for next build ^^. All your works are Great! Once thank you so much!
An
lesjaw said:
patient bro..that day will come..data2sd, app2sd, cache2sd etc
Click to expand...
Click to collapse
ANDROID2SD?
Sent from my HTC HD2 using XDA App
screen shot mabye?
may i know if bluetooth headset music control button working on this ROM?
what about tether and theme manager?
Hi all,
with latest MIUI sd builds, based on MIUI 24.12 I've noticed problems with hotspot wifi, usb tether and the theme manager app ...
Are they work correctly in this NAND MIUI rom?
Thanks for any reply.
Regards

[ROM][GB][08.22.11]ThunderStickGB 1.5.8, Lightning for your Thunderbolt

MY FIRST ROM GO EASY ON ME and HELP is always appreciated
LEGAL DISCLAIMER: Although this ROM has been tested hundreds of times of by a lot of different users with great results, you may be an exception. So always back up your phone first before flashing and understand you take full responsible for the result of using this.
INSTRUCTIONS for a Fresh Install
(1) Download from links below, www.igottadroid.com or ROM Manager to assure you are getting the latest and genuine download.
(2) Do a nandroid backup of your device
(3) WIPE ALL FROM RECOVERY
(4) Flash the MR2 Radio (if you have not done so already)
(5) Flash the ThunderStickGB_RMOTA_mecha_signed.zip
(6) Flash The Kernel.zip (which ever you selected)(one is included with the rom but may be outdated)
(7) Reboot
(8) Get a cofee and return to setup your phone.
(9) ENJOY
INSTRUCTIONS for OTA or Update
(1) Download update from links below, www.igottadroid.com or ROM Manager to assure you are getting the latest and genuine download.
(2) Do a nandroid backup of your device
(3) DO NOT WIPE YOUR DEVICE (or you will loose your apps)
(4) Flash the UPDATE_X.X.X.zip (X.X.X represents the version number)
(5) Reboot
(6) ENJOY
Thanks:
chingy51o - Most of this is made possible by this guy
adrynalyne - This guy
JCase - And this guy
Imoseyon - The Kernel Popper
Koush - Clock Work Recovery and ROM Manger
thatdudebutch - Spectacular modder
slayher - Still widdling away at CM7, props
DrMacinyasha - (lessons with rom manager)
Pendo - Help with modding the Market
Many others for there contributions to this community...
With that said, I present THUNDERSTICK GB
Cleaver name hey.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features include:
-Virtual CD-ROM Drive when plugged in to USB
-Custom animated pull down menu
-Swipe pad settings from the ThunderStick Menu
-Swipe Pad (market app) added
-Custom Shutdown Animation
-Call Blocker
-Customized Settings Menu (Radio Tools, Car Dock Settings with out being Docked, ThunderStick Menu)
-ROM Stats (Thanks adlx.xda)
-Custom Boot Animation
-Custom Lock Ring
-Recent apps in pull down menu
-NETFLIX Updatable directly from Market
-ROM Manager Updates with Selectable Options - Thanks Koush for the Help and the rest of the RM dev team
-Standard gingerbread features as with most ROMs coming out.
-Radio Settings on Setting Menu
-Fully functional WIFI tethering
-USB Drive and ADB working (with correct drivers and a little patience)
-Lean kernel 3.3.8 (Thanks Imoseyon)
-Blue glowing popup menus
-Blue overscroll
-Blue Themed market with transparency
-Themed Market Widget
-Google Car Home
-HTC Battery Widget
-Cool battery icon (UOT Kitchen Version P, Glowing Crysis Slightly Modded)
-Custom Boot Animation (Best one out there)
-Customized Tip Widget
-My Verizon Mobile
-Netflix Working (With out device check as posted by Kellex on Droid LIfe)
-Google Music
-Solid Black Title Bar
-Sense 3.0 ELEMENTS Lock Screen, Wallpapers, Themes, Weather Widget
- Animated windows and popups
Market Apps Included (installs to data/app) So these can be uninstalled and updated from the market as well
-Netflix
-ES File Explorer
-Car Home (Trial)
-Google Car Home
-Google Voice
-Audio Manager
-Folder Organizer
-Equalizer
-Chrome to Phone
-Spare Parts Plus
Optional From Rom Manager: (more to come)
-Rom Download
.Update (for use with previous TSGB versions)
.Full Download (downloads the Full ROM)
-Apps (installs to data/app) So these can be uninstalled as well
.Amazon App Store
.Nexus S Live Wall Paper
.Root Call Blocker
.Screen Shot It
.Titanium Backup
.Android Terminal Emulator
USB ADB Driver for Gingerbread and Froyo ROMS
This does take a little while to react but does work. This is something I am currently working on improving as well.
DOWNLOAD DRIVER HERE
Then update your driver for Windows using control panel / device manager
Find where it says Android Phone or similar and update driver using these files.
REQUIREMENTS:
If coming from a different ROM PLEASE --- >WIPE ALL BEFORE LOADING
Needs a Ginger Bread Compatible Radio Pre-Installed. Recommend using MR2 Radio For Now.
Download Here or From ROM Manger for ability to select your options
UPDATE AVAILABLE - 08-22-11 Version 1.5.8
UPDATE ONLY IF YOU HAVE A PREVIOUS VERSION OF THUNDERSTICKGB ALLREADY INSTALLED
Download the FULL DOWNLOAD - 08-22-11 Version 1.5.8
All builds and Change Log
THE FULL DOWNLOAD WILL AUTOMATICALLY WIPE YOUR PHONE
This ensures a fresh install of ThunderStick will perform as expected and that there are no unusual problems between phones. Most roms only have problems because people are not wiping before flashing, so expect to loose your data (anything not stored to your SD CARD) if you are coming from a different rom or are flashing the full download.
ThunderStick Updates are not complete roms (just the MODS) and will not wipe any part of your phone and in most cases will not require a wipe.
ThunderStick Desktop Notifications and Downloader
The update notifier will run any Windows PC.
It is a simple program that retrieves data from the internet and allows you to check for updates and download them with out opening your web browser. It can run in your system tray as well and will Display pop up balloons when a new update becomes available. This is useful for users that are between ROMs, dont like using ROM manager or cant find previous versions on the net.
It will also allow you to view previous versions and download them and copy them directly to your devices SD card.
OPTIONS OR MODS
No Volume Wake - Flash from ROM Manager or Recovery
Volume Wake - Flash From ROM Manager or Recovery​
Screen Shots
Known Issues
This is a list of known issues related or not to this ROM
OPEN ISSUES
-[HTC Messenger Widget] - Reply button not working from widget.
-[ADB Driver Issue] ADB and USB Storage take a while to connect to PC using Windows 7
-[ROM MANAGER ISSUE] If you downloaded from RM and get a corrupted file error try downloading from the links in the OP. RM may still have issues.
-[THUNDERSTICK ROM][07-11-11] - Not sure the root cause of this but voice mail notifications are not always working.
FIXED
-[ROM MANAGER ISSUE][FIXED 06-12-11] OTA Notifications Not working right, WIP
-[Fixed][FIXED - Release 06-07-11] If data is lost just reboot (hasn't happened on my latest build but also is a common problem with GB Roms)
-[First Release][FIXED - Release 06-07-11] Unforgivable Rebooting and Freezing
-[First Release][FIXED - Release 06-07-11] Poor battery performance - Kernel related - Reverted back to older version 06-07-11
Looking forward to some screenshots. Always like testing out new ROMs on the weekend.
Congrats ThunderStick
kuwlness said:
Looking forward to some screenshots. Always like testing out new ROMs on the weekend.
Congrats ThunderStick
Click to expand...
Click to collapse
Yep same here
Sent using Tapatalk from Thunderbolt with Squared Lighting Rom 3.3.1
Looks very nice. Does this have sense 3.0 elements??
Look good man
nativi said:
Looks very nice. Does this have sense 3.0 elements??
Click to expand...
Click to collapse
Of course, thought it unnecessary to post that since most (if not all) the GB roms currently have that as a standard. Updated first post to reflect this though just too appease the crowd.
Hate to say this, but have got about 10 reboots so far. Barely get to the home screen. Haven't had an issue like this on BAMF or Gingeritis. Make that 11 reboots.
whats this madness. For sure my wife is going to kick me out of the house since I've been flashing lots of roms today
egeorgia said:
Hate to say this, but have got about 10 reboots so far. Barely get to the home screen. Haven't had an issue like this on BAMF or Gingeritis. Make that 11 reboots.
Click to expand...
Click to collapse
oh crap
Did you wipe everything first?
Using leaked radio?
Let it settle before you start using it. My phone has been rock solid all day.
Sent from my ADR6400L using Tapatalk
You should add the sense 3.0 mms
Sent from my ThunderBolt using XDA Premium App
What does this rom offer over any other rom here? I see nothing different except for the theming. Why not put up a blue theme pack in the other forum?
Like anyone else, I'm learning something new and am just sharing my work. Currently the features are basically the same, but this will feature more things as I learn them. Theming is pretty simple so this is just a starting point.
Sent from my ThunderStick
I'll try ur Rom out bro. Blue themes are cool.
Sent from my ADR6400L using XDA App
I'd like to see brightness control in the drop down menu. Media volume and a silent toggle would also be nice. Oh and congrats.
It seems like its got promise. Keep working on it will be one of the better themed roms out. I did have a couple freeze ups on it. U mite want to change the kernel that u are useing.
Sent from my ADR6400L using XDA App
jaymccoubrey said:
It seems like its got promise. Keep working on it will be one of the better themed roms out. I did have a couple freeze ups on it. U mite want to change the kernel that u are useing.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
What apps froze?
Honestly I've been using it all day,using GPS and taking a drive while listening to slacker and connected to bluetooth. The only problem I had was navigation voice was silent when a turn came up and listening to slacker.
Also had a FC on tapatalk not Rom related I don't think though.
Sent from my ThunderStick
It kept restarting for what seemed like forever, i finally had to stop it and flash a different rom. i will try agian later. Thanks

[ROM][KANG][2011.03.25]Unofficial CyanogenMod 6.3.7 (Froyo CM6+CM7 backports)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the beginnings of a port of milaq+nadlabak's CM6 for Milestone A853 to the Milestone XT720. This port came primarily out of these two threads: 1, 2
The ROM here is based on combining say's CM6 port for Motoroi with an initial source build I've been working on with help from stlifey. It's based on milaq's 0.10 release with manual bugfixes. It is usable but has some quirks and rough edges.
The next step is to incorporate those manual fixes into my build tree, figure out how to fork the git repositories in my local repo, and upload a working build tree to github.
Recommended: CM 6.3.7 See post #1224
I need to update and rework this entire post, but I haven't had time yet.
initial backport of CM7 lockscreens (namelessjedi)
power menu screenshots work
stock Motorola Camera/Camcorder (brianlili, peshovec)
720p video recording (brianlili)
improved xt720mod.sbf support
updated gapps package
odex and deodex versions provided (odex recommended for users)
The install procedure is similar to CM 6.3.0-RC3 but use the files from post #1224 and follow the additional instructions there to apply the 720p recording fix.
Themes for previous versions are incompatible and must be updated.
See molohov's theme thread for compatible themes: http://forum.xda-developers.com/showthread.php?p=24435398
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Historical old/releases
Experimental Releases:
CM 6.3.7 Post #1224
CM 6.3.6.2 Post #1143
CM 6.3.6.1 Post #1104
CM 6.3.5.3 Post #1035
Click to expand...
Click to collapse
CM 6.3.0-RC3 Fixes camera/camcorder crashes that appeared in RC2
Because of the camera and camcorder problems with RC2, I've now rebuilt using Motorola's media libraries again. I think this restores camera. Camcorder also works now with a higher quality than before. We need to get to get a media_profiles.xml that works better for our phone. In RC3, I just took the one from milaq's A853.
Known issues in CM 6.3.0-RC3:
FM Radio doesn't work
Gallery button doesn't work
Camcorder doesn't work well
Screenshot in power menu always produces a black image
Changes since CM 6.1.2
Android Keyboard is fixed (Thanks peshovec)
Torch/power-widget uses autofocus led
Linear vibration for haptic feedback vibrations <150ms
Selecting 1% battery increments is harmless (but doesn't work)
Wi-Fi fixes (now works for the AP I was having trouble with)
Korean IME removed (can provide as update if needed)
USB menu has been updated with new translations and resource fixes (Usb.apk)
Reboot recovery from the power menu works.
Hold volume-down during boot to enter fastboot
Bug fixes to app2ext and link2sd support
app2ext is nolonger automatic (you must create /sd-ext/app directory).
Link2SD support (you must create /sd-ext/link2sd directory)
ext4 supported for /sd-ext.*
You can read more about the other changes between 0.10 and 6.3.0 on milaq's thread: http://forum.xda-developers.com/showthread.php?t=1155454 and in the github. Some A853 features (esp. ones that use kernel modules) are not included yet.
*Note about ext4 support: the huge_file option is *not* supported but is default for mkfs.ext4. Nadlabak explained how to disable huge_file on existing ext4 filesystems. Alternately just create ext2/3 partitions and use OpenRecovery-XT720 SD Card Utilities to upgrade the ext2 partition to ext4. Warning: the other OpenRecovery/Androidiani's don't understand ext4 on XT720 (thanks fjfalcon for adding ext4 support to OR for XT720). Also be aware that not many XT720 ROMs understand ext4 yet--hellmongers XDAspecial RC2 *does*.
For more information about changes see See post #605 and the github source.
Recommended instructions:
(Recommended) Install OpenRecovery-XT720 http://forum.xda-developers.com/showthread.php?t=1242259
Download update-cm-6.3.0-RC3-MilestoneXT720-signed.zip http://www.multiupload.com/G5U1YWCG1K
Download gapps-hdpi-20101114-signed.zip http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
Place all zips inside /sdcard/OpenRecovery/updates
Boot to OpenRecovery-XT720
Make a nandroid of system, data, cache (and SD data if you use it)
OR > Apply Update > update-cm-6.3.0-signed.zip
OR > Apply Update > gapps-hdpi-20101114-signed.zip
(if you're having baseband problems) OR > Change Baseband
Upgrades from 6.1.2 or 6.3.0-RC1 (hopefully):
OR > Wipe dalvik-cache
OR > Wipe Cache partition (because of OR bug)
Reboot
New installs
OR > Wipe Data / Factory Reset
Reboot
Themes:
sileshn's themes for milaq's CM 6.3.2 are reported to work in RC2 with the caveat that the reboot to bootloader menu option disappears from the power menu. None of the changes in RC3 should change that. I don't think I've seen reports either way about sileshn's themes for XT720 CM 6.1.2 yet.
3rdstring's DarkFroyo Remix for 6.3 (thanks ashish7350)
Russian Mennace's themes for 6.3: Theme 1, Theme 2
bagongs steelepicblue port
Click to expand...
Click to collapse
CM 6.3.0-RC2: See post #605
Click to expand...
Click to collapse
CM 6.1.2 Notable issues:
Do not select 1% battery increments (see post #7) (became a placebo button in 6.3.0-RC2)
The default keyboard has very, very small keys. You can select the Korean keyboard or download another. (fixed in 6.3.0-RC2, thanks peshovik!)
FM Radio does not exist and will not work.
Video recording not extensively tested -- but, hey, it doesn't crash the phone immediately anymore.
Gallery button does nothing
Haptic feedback is not pleasant when enabled (first attempt at using linear vibrator in 6.3.0-RC2)
RomManager is dangerous on XT720 (not included in 6.3.0-RC1,2)
Reboot recovery goes to motorola's recovery (fixed in 6.3.0-RC1)
CM 6.1.2 Instructions:
Download update-cm-6.1.2-0.10-XT720-signed.zip from http://www.multiupload.com/G1IXXYBSAJ
Download update-cm-6.1.2-0.10-XT720-hotfix6.zip from http://forum.xda-developers.com/showpost.php?p=16249056&postcount=34
Download gapps-hdpi-20101114-signed.zip from http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
Place all zips inside /sdcard/OpenRecovery/updates
Boot to openrecovery
OR > Apply Update > update-cm-6.1.2-0.10-XT720-signed.zip
OR > Apply Update > gapps-hdpi-20101114-signed.zip
OR > Apply Update > update-cm-6.1.2-0.10-XT720-hotfix6.zip
OR > Wipe Data / Factory Reset
Reboot
CM 6.1.2 Hotfixes:
update-cm-6.1.2-0.10-XT720-hotfix6.zip : Fixes for swap, app2ext, overclock, wifi, app2fat (2011-07-02)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Thanks:
brianlili, milaq, molohov, namelessjedi(nlj), peshovec, kabaldan(nadlabak), say, stlifey, sileshn, 3rdstring
j.y.daddy, dateno1, dexter, easye420, mchlbenner, mediaon, esu.matix, en0203, gommers1978, hellmonger, jiroprinz8, khalpowers, knoedelkopf, libertymonger, ltwvince, reverendkjr, sktjdgns1189, vistaus, woodrube
... if I missed someone it's an oversight and not intentional. pm me, i'll fix it
FIRST!!!!
awesome job mioz keep up the work. now i cant wait for cm7
This just running great no reboots
Very stable sorry i looked every where cant find radio apk that will work.
I have not found any bugs yet.
I have been running this for threw hours great work.
Sent from my Milestone using XDA Premium App
mchlbenner said:
Very stable sorry i looked every where cant find radio apk that will work.
Click to expand...
Click to collapse
Thanks! Don't waste time on the radio yet, it won't work because to compile CM6, I had to use A853's libaudio.so which lacks radio support. After the source tree is fixed we can figure out how to use the XT720 libaudio.so
:| An Mz ROM....
[pooded a little...]
Holly crap....
It's full of stars.....
hellmonger said:
:| An Mz ROM....
[pooded a little...]
Holly crap....
It's full of stars.....
Click to expand...
Click to collapse
Yeah, but when I call something alpha, it's merely hopefully working. When you call something an alpha it's something more like a release candidate. I think this still has a way to go, but everyone in the other threads got pretty persistently insistent on starting releases. I'll dogfood it.
ok just found out the hard way, do not select 1% battery increments, or it doesnt recognise it bein charged at all. just showed red battery with [X] and would turn off. when plugged in it said charging 0%. so stay away from that option. :/ atleast it stayed on while plugged in so i could undo it and now charging 60%.
So the ROM is not "nandroid" but "update" based ?
Any suggestions as if I should go back to an original 2.1 SBF ?
Any feedback/review on raw performance and performance degraduation (memory leaks and such) over time ? Battery life ?
Thnaks for the effort !
ktylife said:
So the ROM is not "nandroid" but "update" based ?
Any suggestions as if I should go back to an original 2.1 SBF ?
Any feedback/review on raw performance and performance degraduation (memory leaks and such) over time ?
Thnaks for the effort !
Click to expand...
Click to collapse
as long as you didnt flash a Korean sbf to start with your fine, just apply in OR. and the roms pretty quick, give it a shot. the customization is huge. im loving the full 360 degree rotation, ive been waiting a long time for that haha opens every app almost instantly, it boots fast, i got 1220 on quadrant at 1 ghz, but the only thing i miss is the built in task killer when holding home. that came in handy. im still testing performance, its lookin good tho. well worth a try, i know ive been waiting to taste some delicious cyanogenmod. and boy is it good. haha
thanks your job and hint
Wow! MilestoneXT720 also port CM6.
CM7 solve problems for the future hope to be.
Congratulations! And thanks your job and hint.
bug report (scripts)
[1] Duplicate scripts
I found duplicate scripts in "init.rc".
"/system/etc/rootfs/init.rc"
line 299: exec /system/bin/sysinit
line 473: service sysinit /system/xbin/busybox run-parts /system/etc/init.d
have to delete the line 473.
[2] can't execute module
"/system/etc/init.d/05governors"
"cpufreq_smartass.ko" module is not compatible.
thanks.
DId it come with swape anable?
link2sd compatible ?
Can't have it working...
Looking good. Download once I got home.
Sent from my XT720 using XDA App
WAOOOW
It s faster and more stable than all the wanhu i have test !!!
For the moment everything is working great (expect the keyboard but it s not a big deal i ll install a new one)
Mioze7Ae for the haptic feedback i found a menu in settings / cyanogen mod / input settings which can let you set up the duration of the feedback.... You can make it as smooth as you want!!!
Someone test the apps to ext (or sd)???
It show me my ext 3 is totally empty (with file explorer).... Is there a way to make my apps work or i have to reinstall them all????
For me the only issue is the apps to ext that doesn t work...
Someone have an apk or un update for the dark tremor a2SD ???? It must be the solution
Ext3 empty because is not mounted on boot.
Sent from my XT720 using XDA App
app2sd update pack are here.
This update pack is ext2,ext3 support.
http://www.multiupload.com/92QLMF9XDQ
1. SDCard partition (ext3 recommended)
2. Download CM6-XT720-APP2SD-Patch.zip
3. Place zip inside /sdcard/OpenRecovery/updates
4. Boot to openrecovery
5. OR > Apply Update > CM6-XT720-APP2SD-Patch.zip
6. Reboot
Enjoy!
J.Y.Daddy said:
This update pack is ext2,ext3 support.
http://www.multiupload.com/92QLMF9XDQ
1. SDCard partition (ext3 recommended)
2. Download CM6-XT720-APP2SD-Patch.zip
3. Place zip inside /sdcard/OpenRecovery/updates
4. Boot to openrecovery
5. OR > Apply Update > CM6-XT720-APP2SD-Patch.zip
6. Reboot
Enjoy!
Click to expand...
Click to collapse
THANKS Man
But where did you find this???
Is this the dark tremor app????
I am assuming that we are the HDPI portion of the gapps list for CM6?
2.Download gapps-hdpi-20101114-signed.zip from http://wiki.cyanogenmod.com/index.ph...on/Google_Apps

Categories

Resources