Change Tray clock to digital - HD Mini General

I have a HD mini and have somehow managed to change the clock n the tray to an analog clock the problem is the power icon is over the top and I can't see how to change it back I assum it was digital before. I have seen some posts about holding on the clock but as the power icon is over the top all i get is the notifications manager. Any ideas anyone?
Thanks.

How did you do it ?
If you tried to fix the registry or something . Just change the value back.
--------------
I couldn't figure it out.
Had to clear the Phone - restored it to original settings.
Please include proper instructions/warnings from next time

littlerich said:
I have a HD mini and have somehow managed to change the clock n the tray to an analog clock the problem is the power icon is over the top and I can't see how to change it back I assum it was digital before. I have seen some posts about holding on the clock but as the power icon is over the top all i get is the notifications manager. Any ideas anyone?
Thanks.
Click to expand...
Click to collapse
I had the same problem, I didn't know how it happen. but I had to hard reset my phone

hi, Firstly, YOU HAVE TO BE AT THE LOSCREEN and tap it once.Then you must press for 3 to 4 seconds on the time icon which is high and at the right side of the phone.

yiants said:
hi, Firstly, YOU HAVE TO BE AT THE LOSCREEN and tap it once.Then you must press for 3 to 4 seconds on the time icon which is high and at the right side of the phone.
Click to expand...
Click to collapse
how does it look like? any screenshoot?

yiants said:
hi, Firstly, YOU HAVE TO BE AT THE LOSCREEN and tap it once.Then you must press for 3 to 4 seconds on the time icon which is high and at the right side of the phone.
Click to expand...
Click to collapse
Wow, it works, but effectively in my ROM version 136.xxxx the analog clock is hiddend by the power icon and become unusable.
For whose they do not understood :
When the screen is LOCKED, the top bar apears. You press on this top bar for a while and when you relase it you receive a menu permitting to toggle the clock from analog to digital or reverse.

moscard said:
the analog clock is hiddend by the power icon and become unusable.
Click to expand...
Click to collapse
That's what I noticed. Pity!!

Related

Locking CLOCK display in Phone?

Is there a way to permanently LOCK the clock display format while in the Phone Mode? Or just lock it permanently regardless of what you are doing?
Here's what I am talking about... while using the phone and pressing the Wizard up against my ear, somehow I manage to CHANGE the clock format from digital to analog with my EAR!!!
How can I lock it to DIGITAL so that the option to change it is no longer available?
There MUST be a way to solve this!
I always switch of the phone when I'm calling using the On/Off button on top. This way it is impossible to accidently tap on screen buttons while calling.
Guinness said:
Is there a way to permanently LOCK the clock display format while in the Phone Mode? Or just lock it permanently regardless of what you are doing?
Here's what I am talking about... while using the phone and pressing the Wizard up against my ear, somehow I manage to CHANGE the clock format from digital to analog with my EAR!!!
How can I lock it to DIGITAL so that the option to change it is no longer available?
Click to expand...
Click to collapse
If you are asking how to change it back to digital then answer is tap and hold stylus on the clock for a couple of seconds, a menu pops up. Select digital format here (this is what your ear did, only it selected analog). But if you already know this and asking way to disable this functionality completely so that your ear can't use it accidentally then I don't think there is any. Hope this helps.
Settings
You can disable the touchscreen when you are using the phone. Check through the various settings, I do not remember where it is located but I am sure that is there.
I also would like a solution for the "ear tapping issue".
Maybe a reg hack or something that overrides a reg change automatically.

remap clock sw button

can anyone tell me where in the registry i can remap the
big clock s/w button
its the biggest sw button in the whole device
and when pressed it takes me to a butt ugly (white) alarm and time menu
i want to remap it to the action screen or something (claxon)
anybody ?
or can't it be done
check out this post http://forum.xda-developers.com/showthread.php?t=407777
i wonder if there's some way to just disable clicking the clock...i don't mind changing time by going through the settings menu...
the clock should be a non-clickable element...ideas anyone?
an123 said:
i wonder if there's some way to just disable clicking the clock...i don't mind changing time by going through the settings menu...
the clock should be a non-clickable element...ideas anyone?
Click to expand...
Click to collapse
I agree, you're right abaut it...
lazyhaze said:
check out this post http://forum.xda-developers.com/showthread.php?t=407777
Click to expand...
Click to collapse
I've used this and it works fine.
thanks a bunch fellas
i will try this
but still if anyone knows the registry setting
i like to keep my phone a clean as possible
(i still don't like the hardreset )
tried it and i love it
the best part is that the app isn't running in the background
i now have the action screen when i press the clock
and klaxon when i press the alarm clock
thankyouthankyouthankyou
Isn't the big clock and alarm the same button? They take me to the same settings page on mine?
i agree, i want to disable the click on the clock for already. Is anyone know how to do it?? THX
kien said:
Isn't the big clock and alarm the same button? They take me to the same settings page on mine?
Click to expand...
Click to collapse
no it isn't
even in the standard touchflo it aint
pressing the alarm clock will always take you to the alarm tab
while pressing the clock will take u to the last used tab

[Solved]Backlight Slider Disappeared.

Can anyone help me with this problem... The Backlight Adjustment slider for on external power, in settings, has disappeared and I don;t know why. It was there last night, and this morning I put the HD2 in the docking cradle and the screen went darker, so I looked in the settings and noticed the slider had disappeared, this has happened once before, but it came back after installing a new ROM.
I have just installed a new ROM "Dutty's Leo Multi-Lang V2" yesterday afternoon and the slider was there after flashing the ROM and last night, Any ideas please...
U should try pressing the "Hangup" button until you can select "Lock Phone" (or similar, as i have dutch version). Now this unlock slider will re-appear.
Regards
Patrick
Nitrous_Oxide_ said:
U should try pressing the "Hangup" button until you can select "Lock Phone" (or similar, as i have dutch version). Now this unlock slider will re-appear.
Regards
Patrick
Click to expand...
Click to collapse
I was not on about the unlock slider, I was talking about the adjustment slider in settings for the backlight, see image...
Did you scroll to the bottom of that page? It isn't visible on the initial screen.
In the registry, HKCU\ControlPanel\Backlight\
Set ACBrightNess and BrightNess to 5.
Some program most likely messed with it and brought it out of the 1-10 valid range.
wizzzard said:
Did you scroll to the bottom of that page? It isn't visible on the initial screen.
Click to expand...
Click to collapse
Yes but it's not there, but thanks.
kilrah said:
In the registry, HKCU\ControlPanel\Backlight\
Set ACBrightNess and BrightNess to 5.
Some program most likely messed with it and brought it out of the 1-10 valid range.
Click to expand...
Click to collapse
Hi kilrah. Thanks for the regedit, that has fixed it, thanks for your help.
I don't know what it was that messed it up, could docking it into my cradle cause it, I have a new cradle that has audio out which has a phono plug that goes into the headphone scoket when you dock it into the cradle and I have a mini speaker attached to the cradle? Thanks again

Menu Disappearing in CM7

Is anyone else having an issue with CM7 where the right combination of gestures or touches while cause the menu bar to disappear? I have no idea how to reproduce it, or how to recover from it (short of a reboot) but it's happened at least 4 times i as many weeks.
Just curious if something is corrupt with my install or if it's a common issue.
If the bar is just invisible (the buttons still work, but there are no graphics), just rotate the screen and they should come back.
If you've touched the double-chevron button and the status bar went away, an app has requested fullscreen mode and the chevrons grant the request. Hit "home" to get somewhere that isn't fullscreen. You can pick an "un-hide" button and do other similar things in Settings/Tablet Tweaks, look for "Disable Fullscreen" and "Choose unhide button".
If neither of the above holds, your statusbar has crashed. There's an app that's supposed to bring it back, but that never worked properly for me. I have to reboot.
This hasn't happened to me in recent nightlies, but I'm not positive that the problem is really gone yet.
skylar.sutton said:
Is anyone else having an issue with CM7 where the right combination of gestures or touches while cause the menu bar to disappear? I have no idea how to reproduce it, or how to recover from it (short of a reboot) but it's happened at least 4 times i as many weeks.
Just curious if something is corrupt with my install or if it's a common issue.
Click to expand...
Click to collapse
I've had the menu bar disappear while certain apps were open, preventing me from accessing the app menu and had to use the 'n' button to get out. To get around this I am using Button Savior.
stolenmoment said:
If neither of the above holds, your statusbar has crashed. There's an app that's supposed to bring it back, but that never worked properly for me. I have to reboot.
Click to expand...
Click to collapse
That's my situation. The status bar / buttons disappear, so I hit the physical home button (the N as in Nook button), but the bar is still gone. This was happening on 7.0.3... i just installed 7.1 RC1 and haven't had it happen yet... we'll see.
skylar.sutton said:
That's my situation. The status bar / buttons disappear, so I hit the physical home button (the N as in Nook button), but the bar is still gone. This was happening on 7.0.3... i just installed 7.1 RC1 and haven't had it happen yet... we'll see.
Click to expand...
Click to collapse
Go to Settings/CyanogenMod settings/Tablet Tweaks, and check to see that you have the "Disable fullscreen" option checked. That prevents apps from overriding the status bar visibility. Additionally, you can setup an "unhide" button in case you accidentally hit the chevron or otherwise lose the Tablet Tweaks status bar.
skylar.sutton said:
touches cause the menu bar to disappear?
Click to expand...
Click to collapse
Because you say "menu bar" and later on say you press the N button and they are still missing I believe you are talking about the ADW menu buttons (the launcher and apps buttons). If that is what you are referrinng to then you should go into ADW settings and uncheck the hidden taskbar option. By default it is checked.
can reproduce it on my EVO
I found out how to make the menu disappear, but cannot make it reappear.
I have an EVO 4G (original supersonic) and I am able to make the bottom home menu disappear using a downward swipe. I've done this accidentally quite a few times. (I'm referring to the Phone/Square/World Icons that launch the primary apps)
However, I do not know how to make it come back. I have been able to swipe randomly and get it to reappear, but I do not know what combination actually causes this.
The only way I know how to bring it back for sure, is a reboot. I wish I knew what that swipe combination was to restore the menu
uffal said:
I found out how to make the menu disappear, but cannot make it reappear.
I have an EVO 4G (original supersonic) and I am able to make the bottom home menu disappear using a downward swipe. I've done this accidentally quite a few times. (I'm referring to the Phone/Square/World Icons that launch the primary apps)
However, I do not know how to make it come back. I have been able to swipe randomly and get it to reappear, but I do not know what combination actually causes this.
The only way I know how to bring it back for sure, is a reboot. I wish I knew what that swipe combination was to restore the menu
Click to expand...
Click to collapse
By "Menu Bar", do you mean the the Dock where you can access the App Drawer?
If this is it, then you just have to swipe it up. But to just to warn you, it is "VERY HARD" to get the right swipe for it to show again. Trust me, I tried. Best solution would be to disable the "HIDE" Capability of the Dockbar by going into Settings>ADWLauncher>UI Settings Go down to Hidden Dockbar and disable Dockbar.
thewaywardgeek013 said:
By "Menu Bar", do you mean the the Dock where you can access the App Drawer?
If this is it, then you just have to swipe it up. But to just to warn you, it is "VERY HARD" to get the right swipe for it to show again. Trust me, I tried. Best solution would be to disable the "HIDE" Capability of the Dockbar by going into Settings>ADWLauncher>UI Settings Go down to Hidden Dockbar and disable Dockbar.
Click to expand...
Click to collapse
thanks thewaywardgeek013, that worked perfectly. It's almost impossible to find the right settings.

How can I change the battery indicator?

I can not find it, weird?
I want the indicator in pourcentage?
warplane95 said:
I can not find it, weird?
I want the indicator in pourcentage?
Click to expand...
Click to collapse
you need to get into the system UI Tuner. To do that you’ll need to swap down your quick panel and long press the setting gear icon for about 7-10 seconds then you’ll see system UI Tuner at the bottom of your setting window next to the About phone setting. enjoy
boxcar8028 said:
you need to get into the system UI Tuner. To do that you’ll need to swap down your quick panel and long press the setting gear icon for about 7-10 seconds then you’ll see system UI Tuner at the bottom of your setting window next to the About phone setting. enjoy
Click to expand...
Click to collapse
thank you
Been trying to get System UI Tuner working on my Nexus 6P, I have developer options enabled but it just work. I've tried pressing for 2-3 seconds, pressing for 5, pressing for 10.
Also tried on Nexus 9 and HTC One M8 GPE with no luck.

Categories

Resources