Database Users

bluetooth turning OFF when making a call

hi ppl
i use an austrian mda2 w/ ROM 1.6.00GER and ExtROM 1.60.07 together with a parrot ck3000 handsfree in my car.
i use the original bt stack w/o ANY changes.
making calls and taking calls is no problem at all and works most of the times.
the problem is as follows: when i enter the car, bt turned on, and also profile says "BT Headset ist eingeschaltet (means bt headset is turned ON)", and the n i want to place a call, the call is not routed over the handsfree. explanation is simple: when i change back to "today" - bt is turned OFF !!!
so my conclusion: everytime bt is used for the first time after disconnetion from the handsfree, it just turns OFF when it should connect. after i turn bt on by hand again it works w/o any problem. ('till i come back to the car of course - and everything starts again)
this is very annoying....
so has anyone any hint what to do? i wouldn't really mind updating to an english rom - if i just knew that that does work.
thanks,
servus ize|man

when i use this one
http://bluetooth.i-networx.de/index_e.html
my device turn bluetooth on when i call even though i dont have a bluetooth headset maybe it'll help you

thanks rudegar
i know that stack by TOWA. unfortunately that does not work at all here
i'd love to use it, but w/ this stack my handsfree is reconized sometimes, sometimes i have to pair the devices every time i start my car, and i can NEVER place calls with the combination mda2 with networx bt manager installed.
maybe someone has the same experiences and can report them
servus ize|man

Bluetooth cuts out after a few minute

Hi All,
I have MDA compact unlocked. When i answer a call with my Motorola HS810, it works fine but only for a couple of minute. It then loses connection and I have to actually use the phone. Has any experienced this and is this a fix ffor it?
Thanks for your Help.

Yeah this is a confirmed issue that they are working to resolve. I'm going to post a response e-mail i got back from the O2 helpdesk.
They will make a ROM update available sometime....not ETA at present.

I guess this profile should help
it will basiclly let ur PDA receive bluetooth messages.. even when ur display is turned off... and the same thing for the bluetooth headset...
I hope it will work
cheers

Can anyone confirm whether this solves the problem?

Hi,
I have the iMate Jam and a Motorola HS850. I can pair up ok but the connection drops out when I make a call or receive a call simply move the earpiece away from my Jam.
It is as if my Bluetooth signal is pathetically low! :evil:
I hope they fix it soon as I am less than impressed as I can't take the Motorola back because there is nothing wrong with it.
theborg

duke911 said:
I guess this profile should help
it will basiclly let ur PDA receive bluetooth messages.. even when ur display is turned off... and the same thing for the bluetooth headset...
I hope it will work
cheers
Click to expand...
Click to collapse
Is this still working?
I have a Touch Pro and a Saab boardcomputer. After pairing these two, the connection disconnects after a few minutes (when I do not have a call).
By the way: when I have a call every five minutes (so both are active connected) the connection still active.

Automatically enable bt headset mode

Hello,
i have a qtek 2020 1.75.00 WWE
My question is as follows:
Is it possible to have the headset mode set to "enabled" as soon as Bluetooth is switched on? At this moment, i have to go to the today screen to manually touch the headset icon to enable it. So even when bluetooth is active, i still can't use my headset immediately. When the phone rings i still have to go through the above mentiond manouvre, so by the time i have done that, the phone already stopped ringing.
So what i actually want is that the headset mode is either always enabled or that it gets enabled as soon as bt is active.
I hope you can help me.
Regards,
Ilana

Hi Ilana,
On my i-mate (XDA II) I run Pocket Bluetooth Tools (or BTHTools) which you'll find on XDA Developers if you search for it, and aside from adding additional profiles (such as the missing SPP - Serial Port Profile, which is needed to connect to Bluetooth GPS units), it also replaces the default Headset Profile app with an automatic one.
When the phone is activated by an incoming or outgoing call, the Bluetooth radio turns on automatically & I just tap the BT headset's answer button to transfer the call to the headset. When the call finishes the BT radio automatically turns off again after 60 seconds (thus saving battery power).
Give it a try - you can uninstall it to return to the default Microsoft BT stack if it doesn't ring your bell.
Lucas.

Thank you for your help. I will definitely give it a try!

headset password not stored in s200

I paired my bleutooth headset several times now. It connects allright but everytime I have to give the headset password . I thought pairing was needed only one time.
I hope somebody has an answer for me .

Hmm, perhaps an obvious question but how do you pair your device? What steps are you taking?
I had this problem once, every time I came into range of my carkit there was the bluetooth message a device was trying to pair and I had to give the password.
However once I removed the pair and did it again it worked properly...

Hello Raptor, thats exactly what happens.
I pair the first time the headset and the s200 by holding a button and then de s200 asks for the key, i klick finish and it works fine.
But nex time I want to use the headset whe recognizes the headset but asks for the key again.

Hmm.. that's kinda weird. Dunno if you can "reset" the headset in any way?
With my carkit the problem was (I think/guess) that the carkit remembered the pair with my s200, but since I upgraded the rom the s200 didn't know the carkit anymore. But since I used the same name etc on my s200 something might have gone wrong.
It could be however that when you try to pair with your headset and you have to enter the password a popup comes up saying a device is trying to pair with your s200. You have to ignore that popup and just pair from the bluetooth settings of the s200 (from where you started, not the popup).
At least that's what happened on the carkit lol Never had a problem with my headset though :/
So I did a reset on the carkit and removed the pair from the s200, then searched again for a bluetooth device on the s200, paired with password and then it worked properly.

Hello Raptor, I tried your option several times but the situation stays the same. But thx for your input.

Hmm.. does the headset have a password at all? Maybe you can leave the password entry empty? Although I'm afraid it wont.
But otherwise I hope someone else can help you with this :/

I'm speechless, this morning te headset connected without asking for the password.
Beats me, but i'm happy!
Greetings!

bluetooth headset

When the headset is paired with the phone can I somehow receive a call on the phone and not on the headset or I should turn off the headset if I want to do that ?
Sorry if the answer is in the 2020 manual - didnt get it when I bought it
Thanks

If you want to answer the call with the PDA, you'd use the green button on the himalaya. If you don't press the control in the headset and get the call using the green button the audio comes out from the PDA and not from the headset.
I hope my poor english is understandable.

omg, yes I undesranded you perfectly, thanks
You just reminded me of my big problem once, somehow I ve changed digital clock to analog in the today screen. After some time I ve forget how did I do that and no matter of what I used to try clock remained analog. Digged thru the 2020 from alpha to omega, digged thru the registry... No luck. Utils, no luck. Clock remained analog.
Asked my friend, qtek user, about the problem. Guy clicked and holded the stylus on the clock for a few seconds. Menu appeared - digital or analog
Obviusly some simple solutions are not always visible to all of us
Thank you once more

ahh one more quickie please, if the headset is paired to the phone and Im a caller how can I talk to someone using the PDA not headset ?
thanks

BT headset (not work ;P )
Gosh.. I would like to have your problems... I can't turn on headset on BT... when I turn it on the headset connects once and after the connection there is no option to turn it on... only fisconnect of bluetooth and reconnect ;/
O2 XDA 2 with WM 2003 SE