Related
I couldn't wait until July to release this... new build of WM6.5 that fixes the keyboard issue (but the SYM key still works, which was disabled by Montecristo's registry patch) and the device.exe issue (according to keyx's A2DP instructions)...
WM6.5 build 21820 for the iPAQ 910c/912c/914c Business Messenger:
21820br0609 download here
Known bugs/fixes:
- Right softkey on "Clock" homescreen panel requires this fix by EREZYAD (thanks!)
- I accidentally cooked .NET CF 2.0 into this ROM instead of 3.5. You can still run version 3.5 using these instructions.
This ROM features HP's newest firmware base, meaning increased max volume and other fixes. I have removed the following OEM junk:
- Cyberon Voice Commander
- iPAQ Tips, Help & Support
- HP Photosmart Mobile (and screensaver)
- Snapfish uploader
- HP custom IE homepage
- HP Today theme (and other customizations)
- Google Maps (old)
- Goolge Search (old)
- iPAQ DataConnect
(...since the new WM6.5 AutoConnect feature does the same thing)
This ROM contains the following little additions:
- NumBattery
- GPS Viewer
- Backlight Controller 0.9.5.2
Once I get around to making some new OEM packages for my favourite freeware apps, I'll bundle those in the "m" series next month:
WM6.1 21042br0709m "motherload" - pending
WM6.5 21820br0709m "motherload" - pending
INSTRUCTIONS FOR FLASHING:
1. Get a microSD card sized 2 GB or lower (SDHC won't work) and format it with regular FAT filesystem. Copy my FLASH.DIO to the root of the card. Insert card into your device.
2. Put your device into SDLoader mode by holding VOLUP+OK(button on right side) and pressing RESET. Make sure your battery has a decent charge (over 50%) and isn't connected to any USB charge or sync cable (or else your device will just go into RUU mode).
3. Watch the magic... SDLoader will check the file integrity, flash to your device ROM, do a clean reboot (can take a minute longer than usual) and then go into the "Welcome to Windows Mobile, tap here to continue" stuff.
4. If you run into any problems, repeat steps 1 through 3 with a FLASH.DIO that has worked before (i.e. you can make one from HP factory ROM update using Paloma's instructions posted here)
CREDITS
- Keyx for kitchen tools and early guidance
- PPCGeeks for 21820 sys and xip
- HP for the oem
- many others on xda-devs and ppcgeeks for their releases, tutorials, etc.
DONATION?
- I've never made a donation on xda-devs
- I'm not interested in a donation from xda-devs
- I cook mainly for my own use and interest
- I share what I cook, because sharing is easy
- I don't take orders
I'm downloading it
It works like a charm! No bug at all till now! Fast and Stable! Just the Clauncher doesn't work, but maybe it's my problem!
The issue with the keyboard is fixed! Great Job
This would seem to confirm that despite what HP says, the "Rogers 910c only" OEM files are compatible with the 912c and 914c.
I could not make the dump your rom ... I could not use the xip for my roms ...
Montecristo said:
I could not make the dump your rom ... I could not use the xip for my roms ...
Click to expand...
Click to collapse
You can't dump the whole thing because I used keyx flex kitchen; there are too many files to use the old (dumpable) method.
However, you can extract the xip from my FLASH.DIO using this command:
osnbtool -d FLASH.DIO 1 xip.bin
Then xip.bin is your xip; you'll want to insert that into an original 80 MB TEMPLATE.ROM (i.e. whatever you've been using to cook so far) using
osnbtool -c TEMPLATE.ROM 1 xip.bin
Then delete your previous TEMPLATE.ROM and rename TEMPLATE.ROM.NEW to drop the ".NEW" part.
hi
i have insalled it (testing it now)
on this rom the nav app igo works
also my lang hebrew works (but it did with every 900 rom )
the keyboard issue is the same but my test is logging using opera mini (on your rom & monto cab fix the keyboard works on opera...)
i use an app called "o3
tuch" on monto rom the app didnt see incomming sms there4 it did not show up on all screen and and by doing so i lost some functions (auto reply larg veiw..)
on your previus rom it did work with all function but now it is like monto..s' rom
can u see way/what is the diff comperd to the prev one?
something with sms event that stops after WM popup it's sms window (this way other apps can not use this event)
will try now the push maill....
4 now it looks ok 4 my the first thing i tested before heb was igo8 and it is ok now
tnx
EREZYAD said:
hi
the keyboard issue is the same but my test is logging using opera mini (on your rom & monto cab fix the keyboard works on opera...)
i use an app called "o3
tuch" on monto rom the app didnt see incomming sms there4 it did not show up on all screen and and by doing so i lost some functions (auto reply larg veiw..)
on your previus rom it did work with all function but now it is like monto..s' rom
can u see way/what is the diff comperd to the prev one?
something with sms event that stops after WM popup it's sms window (this way other apps can not use this event)
Click to expand...
Click to collapse
RE: Opera Mini... it works for me on this ROM.
RE: Your app with SMS... try disabling the on-screen message for new text message in Sounds and Notifications control panel.
The difference with this ROM is that it is a new build. Mainly that fixes the keyboard issue, which was in the OS.
benjaminries said:
RE: Opera Mini... it works for me on this ROM.
RE: Your app with SMS... try disabling the on-screen message for new text message in Sounds and Notifications control panel.
The difference with this ROM is that it is a new build. Mainly that fixes the keyboard issue, which was in the OS.
Click to expand...
Click to collapse
opera mini works at all roms the thing was thet u cannt log into the forum using opera mini
on the new ver of opera mini cab u can but it is not as good as the prev ver
it indicat on issuse with the keyboard ,if u use monto key fix you can log with any opra Ver
as 4 sms the removal of notefication did not work
anyway tnx 4 the rom
Hello,
i'm maybe the only one, but i'm having problems... when i click on the right-button for open the wireless manager from the today screen, i get an error message that the app link doesn't exist.
Except this i love this firmware... very fast and with all apps already
record button does not seem to work on this one...
Montecristo said:
I could not make the dump your rom ... I could not use the xip for my roms ...
Click to expand...
Click to collapse
Are you working on a multilanguage version?
Which .net Framework is included in this ROM? If you run "Device update" by CRC (Excellent app!), it complains that the .net CF is too old. Never happened to me before....
AlexMagik said:
Hello,
i'm maybe the only one, but i'm having problems... when i click on the right-button for open the wireless manager from the today screen, i get an error message that the app link doesn't exist.
Except this i love this firmware... very fast and with all apps already
Click to expand...
Click to collapse
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
EREZYAD said:
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
Click to expand...
Click to collapse
wow this is really fast!
i will try tonight and come back to you
thank you!
EDIT:
1. Great fix! now it's perfect
2. the Record button works after go in settings and apply "recorder"
Thanks
Thanks Benjaminries for this great ROM
ROM instalation is very easy for newbie like me
the wireless manager is fixed easy with Erezyad but the record button is still not working
and i want to ask, is anyone know how to improve camera quality?
thanks
dronel said:
Thanks Benjaminries for this great ROM
ROM instalation is very easy for newbie like me
the wireless manager is fixed easy with Erezyad but the record button is still not working
and i want to ask, is anyone know how to improve camera quality?
thanks
Click to expand...
Click to collapse
didnt start/settings/personal/buttons helpd u?
as for camera go:
front door/camerashop/bay/Nikon
EREZYAD said:
try 2 install this cab (install ,turnoff device for 5 sec,SR)
then when clock is marked try the right softkey
good luck
Click to expand...
Click to collapse
Thanks for posting that cab. I had just fixed it in the registry myself afterward and forgot to tell people: HKLM\SOFTWARE\Microsoft\CHome\CClock\SK2TEXT and SK2URL
parkhaus said:
Which .net Framework is included in this ROM? If you run "Device update" by CRC (Excellent app!), it complains that the .net CF is too old. Never happened to me before....
Click to expand...
Click to collapse
Oh weird - I just looked and it is NetCF 2.0 (what????) which I guess was put in by my SYS source at ppcgeeks. I'll stick NetCF 3.5 in the July release, promise. For now, download and install the .Net CF 3.5 redistributable from Microsoft.
Pranix said:
record button does not seem to work on this one...
Click to expand...
Click to collapse
Dude, the Record button works just fine for me. Are you talking about hitting it once? That shows up as the VoiceCMD button in the Buttons control panel - it comes unassigned, but you can point it to the Backlight control (my personal favourite) or Voice Command or whatever.
The "Record" button requires you to press and hold down the button while you record a voice note.
Just a quick question:
I would like to know without the use of a ROM flash, if I am able to use the 6.5 honey-comb start menu in 6.1?
If someone created a cab that could replace the start menu, that would be fantastic.
I dont think so. It use different OS shell.
Pals,
I had 2 questions :
1- I built a rom, but its always stucked after pressing skip button on password screen when 1st run, any one know which package cause this problem!!
2- How i can change the OS number in boot loader screen!
3- how i can get today plugin work!!
4- what packages needed in order to let Camera work?
Thx
1- I don't know, post your build_log.txt from the root of the kitchen so I can see what packages you have enabled.
2- I don't know, I don't think our devices support changing that.
3- If your installing Manila it enables itself by default. If your trying to change the default I believe one of the tutorials here could help you.
XirXes said:
1- I don't know, post your build_log.txt from the root of the kitchen so I can see what packages you have enabled.
2- I don't know, I don't think our devices support changing that.
3- If your installing Manila it enables itself by default. If your trying to change the default I believe one of the tutorials here could help you.
Click to expand...
Click to collapse
[/QUOTE]
ok pal, when i generate dsm files? if i add new package??
http://rapidshare.com/files/292135866/Build_log.zip.html
anybody can upload new remapped phone canvas to me?? thx...
mua30 said:
Pals,
I had 2 questions :
1- I built a rom, but its always stucked after pressing skip button on password screen when 1st run, any one know which package cause this problem!!
2- How i can change the OS number in boot loader screen!
3- how i can get today plugin work!!
4- what packages needed in order to let Camera work?
Thx
Click to expand...
Click to collapse
1. we talk about WM 6.5 OK,
A. Disable auto setup, auto setup only compatible with wm 6.1
B. Connection setup in Official OPAL and other HTC device always crash with ADC, so choose ADC or Conection setup only.
2. You don't need to change it, Why do you want to change it?
3. What kind of today plugin? M2D? or default WM 6.5 titanium plugin?
4. camera driver and camera application, usually camera driver is in the OEM, and camera app in the separate folder inside EXT
BesFen said:
1. we talk about WM 6.5 OK,
A. Disable auto setup, auto setup only compatible with wm 6.1
B. Connection setup in Official OPAL and other HTC device always crash with ADC, so choose ADC or Conection setup only.
2. You don't need to change it, Why do you want to change it?
3. What kind of today plugin? M2D? or default WM 6.5 titanium plugin?
4. camera driver and camera application, usually camera driver is in the OEM, and camera app in the separate folder inside EXT
Click to expand...
Click to collapse
Thx Besfen, another question, do u have remapped phone canvas in order to fill the screen correctly without appearing of scroll bar when dialing!!
mua30 said:
Thx Besfen, another question, do u have remapped phone canvas in order to fill the screen correctly without appearing of scroll bar when dialing!!
Click to expand...
Click to collapse
Cook in this package and it should fix it. It worked for me with Mega's phonecanvas which I recommend as it works correctly with 6.5. I don't know if it will work with older ones but you can give it a try.
XirXes said:
Cook in this package and it should fix it. It worked for me with Mega's phonecanvas which I recommend as it works correctly with 6.5. I don't know if it will work with older ones but you can give it a try.
Click to expand...
Click to collapse
Just import it or replace its contents with phone canvas!!!
mua30 said:
Just import it or replace its contents with phone canvas!!!
Click to expand...
Click to collapse
Its funny what is going on, after flashing the today in control panel is working, after turining off the mobile and turning on its not!!!
i am doing HD 2 times, hope its work!
Any advise!!
Hi,
So, I installed QuickMenu from PocketPC Freewares:
http://www.freewarepocketpc.net/ppc-download-quickmenu-v2-7.html
Problem is what worked with WM6.1 doesn't work with WM6.5. It doesn't start up after a soft reset even though the options are set to start up after reset.
Can anyone recommend an alternative program for QuickMenu that does work in WM6.5?
Thanks in advance.
anyone?
have any alternatives? I'm thinking that there has to be something but searching google for Quickmenu alternatives doesn't lead to anything major.
Any help? Please?
Shortcut in Startup menu
sanjsrik said:
So, I installed QuickMenu from PocketPC Freewares:
http://www.freewarepocketpc.net/ppc-download-quickmenu-v2-7.html
It doesn't start up after a soft reset even though the options are set to start up after reset.
Click to expand...
Click to collapse
I use QuickMenu with WM 6.5.
Check that you have a shortcut "QuickMenu.lnk" in \Windows\Startup.
Quick menu could be used on 6.5. Find the appropriate version
I use this version:
http://forum.xda-developers.com/showpost.php?p=4101818&postcount=28
It works very well on tmo TP2 with stock 6.5 rom.
Apparently there are a few more tweaks needed when using QM on wm6.5 but that cab has done everything needed.
THANK YOU!!! I ve been looking for this forever
Hi. 15-09-2011
Because of some asks I would like to remind that SPB Shell in my roms is trial version and is active only two weeks.
It is full functional version and to be operational version it requires serial code.
Do not be surprsied when You will loose GUI and none access to the system.
Use "face" to execute Total Commander or any other software You configured before
which allow You to execute needed system software, additional cabs, romove some cabs , etc. so that to make You system be full functional again.
Regards
fxdjacentyfxd
Hi. 18-07-2011
Below You will find links to UPDATE6 of my rom.
All concerns radio 1600.
Accordingly to some users asks, I improved some of my software:
1) fxdjBatteryStubGauge - in current version it is configurable so that user
could select whether he wants to be warned ( sound warning - even in sleep mode ) that current battery level is below configured level.
If You want this feature please read posts starting from here :
http://forum.xda-developers.com/showthread.php?t=993343&page=32
Additionaly, I add "inactive period" so that user were not disturbed by sound warning when he sleeps. For example one can set that from 22:00:00 to 06:00:00 warning sound will be inactive.
2) fxdjWMSBU - I would like to remind it is software responsible for "face".
One ot its feature was possibility to execute total commander so that to prevent user for doing hardware reset. Now, what software will be executed is configurable. If something go wrong, total commander is executed as default.
I added some packages:
a) ArkSwitch as a .cab
b) PIM backup
c) RDP
d) msn weather
e) opera mini as a .cab
Here two versions with NCF3.7 :
http://www.sendspace.com/file/onddyi - 134MB free RAM ( recommended )
http://www.sendspace.com/file/bkmxwy - 138MB free RAM
Here two versions with NCF3.5 :
http://www.sendspace.com/file/2frmhm - 134MB free RAM ( recommended )
http://www.sendspace.com/file/2dqx3t - 138MB free RAM
I was in hurry so I forgot to prepare configuration settings in my rom.
Here :
http://www.sendspace.com/file/tlmu1h
zip file with two reg files concerning fxdjBatteryStubgauge and fxdjWMSBU
After flashing hard reset as usual is required and please tap "ActiveSync Enable"
from my Utils directory so that AS worked as typical.
For people who like hardcore special version with 142MB of free RAM.
With radio 1600 and NCF 3.7. Not tested at all but should work. I hope
someone tell me what does not work.
http://www.sendspace.com/file/uad01r
Enjoy
Regards
fxdjacentyfxd
************************************************************
Hi. 31-05-2011
Because I did some works concerned with manual management of ActiveSync
and some people ask me about roms with NCF3.5 instead NCF3.7 ( NCF 3.5 has directx assembly needed by some software like Google Navifgator ) I decided to release UPDATE5 of my WM 6.5 roms. All with radio 1600 .
Here two versions with NCF3.7 :
http://www.sendspace.com/file/dt2ydj - 134MB free RAM ( recommended )
http://www.sendspace.com/file/vuj7nr - 138MB free RAM
Here two versions with NCF3.5 :
http://www.sendspace.com/file/kmfsv5 - 134MB free RAM ( recommended )
http://www.sendspace.com/file/qb760n - 138MB free RAM
Additional AS managment in directory Utils like other additional software
( some tools for GPS management ):
Here link to post with picture :
http://forum.xda-developers.com/showpost.php?p=14247007&postcount=292
After flashing hard reset as usual is required and please tap "ActiveSync Enable"
so that AS worked as typical.
Remember that my AS utilities do not eliminate need to change TG01/PC connection settings ( "mass storage"/ "AS" ) in "Settings". They only block/unblock AS so that none software was able to execute it.
"ActiveSync Kill" removes AS executables when AS connection is finished.
For example, after disconnecting USB cable between TG01 and PC, AS connection is broken but AS software is still in memory.
Additionally, transcriber software has been added.
Enjoy
Regards
fxdjacentyfxd
************************************************************************************************************************
Hi. 16-04-2011
Here http://www.sendspace.com/file/iowu3j
PATCH1 for UPDATE4 ROM . Can be applied for earlier updates ( UPDATE1, 2 a and 3 ) too
It contains the same as file already included here :
http://forum.xda-developers.com/showpost.php?p=12922239&postcount=240
How to apply it is here : http://forum.xda-developers.com/showpost.php?p=12922239&postcount=240 too.
What is is for ? Words of collegaue koku32 explain everything:
http://forum.xda-developers.com/showpost.php?p=12931207&postcount=248
I guess that in other cooked roms which utilze any .cab for WM start disabling ,
situation is similar but not fixed like in my rom. It is possible to delete there one of this
0-bytes .cpr file and WM start is active again and additional free RAM will be lost.
Enjoy
Regards
fxdjacentyfxd
******************************************************************************************
******************************************************************************************
Today I have released UPDATE4 of my fxdjROM2.0 rom.
fxdjROM2_0_update4_radio321_buildxip21840_VER1.zip
http://www.sendspace.com/file/hyln2i
fxdjROM2_0_update4_radio1600_buildxip21840_VER1.zip
http://www.sendspace.com/file/dbdhq6
fxdjROM2_0_update4_radio1600_buildxip21840_VER2.zip
http://www.sendspace.com/file/6ol3ux
fxdjROM2_0_update4_radio321_buildxip21840_VER2.zip
http://www.sendspace.com/file/65y66a
In two versions and two radios as previously.
Version1 has about 134-135MB of free ram and I recommend it as absolutely stable.
Version 2 has about 138-139MB of free ram. Some poeple tested it and their oppinions You can read somewhere in the thread.
What new/improved/fixed in comparison to UPDATE3 ? :
1) windows start button "defreezer" . Now there is no any fereeze when user tap on wm start button. "face" appearing in place of start button has two meanings:
- is for fun
- it is "life saver" place. Why ?
Sometimes people uninstall SPB Shell and do not remember that start button is disabled. If they do it - only hard reset can save their life . So far they could uninstall special .cab responsible for disabling wm start button and then they could uninstall spb shell safely. Anyway , even if someone remove current UI , he will not be in "black whole" anymore. If this happens:
- simply tap on wm start button to cause the "face" will appeare
- wait for a while and tap on the "face" before it disappeares
Now You can notice that Total Commander has been executed.
Having Windows Commander You can do any operations like installing new UI or something other. No hard reset required.
This Total Commander it is special copy of Total Commander and is placed in special directory. You can update/remove current installed version of Total Commander and it will have no any influence on the copy designed for safety reasons.
2) fixed soft "home" and "back" button. Now soft "home" button and "back" button
works as they should. As You maybe remember, before PATCH1 to UPDATE3, back button worked as ... home button too.
3) internally fixed battery driver.
4) my last software for GPS driver/service restart/status
5) because I do not like when there are sometimes "strange" ramains on application list ( making calls and recieving calls create such remains from phone.exe ), I created "killer" of this. Nobody will need this but I like to have "clean in home"
Elements from point 4) and 5) I placed in newly created directory called "Utils".
You will find it in "Programs" as directory and four applications inside.
Of course, people utilizing my UPDATE3 and PATCH1, rather will not gain too much in this update but everybody can do as wants.
Enjoy
Regards
fxdjacentyfxd
******************************************************************************************
******************************************************************************************
I attached patch1.zip file here :
http://www.sendspace.com/file/2rgybg
It is fix patch containing following files:
1) fxdjTG01HKMapper.exe
2) fxdjWMSBU.exe
3) fxdjWMSBU.lnk
It may be bit complicated to apply this files manualy ( I have no time to create special setup ) for less experienced users so if tests made by experienced users will go ok, I will realease it in UPDATE4 of my rom.
What this files change in my rom and how to apply them ?
a) fxdjTG01HKMapper.exe . This software is already runing on my rom. It fixes "back" button. Current version has bug. "Back" button does the same action as "home" button. Attached version of file fix it. Unfortunately , still unresolved problem of "zoom" button but
nobody even asked about it so far ( I know Oly, You asked )
To apply this file utilize fdcTaskManager which is on my rom in "Programs". Execute fdcTaskManager and close running version of
fxdjTG01HKMapper.exe. You will see it on "Process list " and You can close it there. First select "Close" but if it will be not possible, select "Kill". After closing, copy attached version of fxdjTG01HKMapper.exe to "\windows" directory so that to overwrite old version.
If You want save old version before it. I did not find new version unstable but who knows
b) fxdjWMSBU.exe and fxdjWMSBU.lnk . This software partially resolve problem of WM freezing
when user taps on WM start button. But we know that user should not tap on it because it is disabled
Copy fxdjWMSBU.exe to "\windows" directory and copy fxdjWMSBU.lnk to "\windows\startup" directory
c) Restart the system !
Enjoy
Regards
fxdjacentyfxd
******************************************************************************************
******************************************************************************************
Hi.
UPDATE 3 of my rom has been created.
It is functionally the same rom as UPDATE 2
but fixed so that camera software worked fine.
I released this update in two versions:
1) Version 1 - has about 134-135MB of free RAM. Works perfect.
Has been testing ( utilizng ) by me for 3 days ( almost all embeded software ) so I recommend this version.
Issued with two radios : 1600 and 321 . Here links for download:
http://www.sendspace.com/file/shac66 - radio 321
http://www.sendspace.com/file/3s1cuq - radio 1600
2) Version 2 - has about 138-139MB of free RAM. I tested it only a little bit to see whether camera software works correct.
One can expect maybe more lags or other effects but feel free to test it and let me know.
Issued with two radios : 1600 and 321. Here links for download:
http://www.sendspace.com/file/r0t10t - radio 321
http://www.sendspace.com/file/8cqmiq - radio 1600
Regards
fxdjacentyfxd
******************************************************************************************
******************************************************************************************
Hi.
As I promissed , UPADATE 2 of my rom has been created.
UPADTE 1 was not living even one day
Here http://www.sendspace.com/file/ei99x1
You can download it with radio 1600. Tested by me so surely works fine.
Maybe eving and tomorrow
morning I will upload version with radio 321.
Here http://www.sendspace.com/file/x59wd3
version with radio recently popular 321 radio.
I did not test it at all so any complains not for me if do not work
In this update ( both radios above - 1600 and 321 )You have all that was in UPDATE 1 and ....
I removed annoying lock screen during calls/talks . Now You can
navigate through the system during call and even utilize my software
to switch backlight off what is sensible because backlight eats energy.
This software You will find in my "Power" directory. One tap to screen and
You have backlight on again. It works like toggle.
Enjoy
Regards
fxdjacentyfxd
***************************************************************************************************
***************************************************************************************************
Here http://www.sendspace.com/file/gaxs06
link to update 1 of my rom.
What changed :
1) soft "home key" button works perfect and from any appplication user
can go to SPB Shell home screen
2) fix in registry concerning SRDHD - thanks colleague koku37 for this. Now
"internal" mode is remembered between system restarts.
After flashing this rom and doing hard reset, one has to select SRSHD control panel and select mode ( hedphones or internal ) because none of them is selected. After this and changin other settings it is permamanet and rememebered between system restarts.
3) Registry fixex concerning installed java and facebook
Other features of my rom - read all this post untill the end
P.S. Wait for may UPDATE 2 release. I hope I will remove annoying lock screen
showing up during calls/talks
Enjoy
Regards
fxdjacentyfxd
***************************************************************************************************
***************************************************************************************************
original version still availablle here:
http://www.sendspace.com/file/yxeup9
Features ( concerns basic version, UPDATE1 and UPDAT2 too ):
1) On startup about 298MB free ROM and 140MB free RAM
2) Base user shell is SPB shell 3.5.5 added as .cab
3) Other installed .cabs
a) Latest Palringo communicator ( includes facebook chat )
b) CorePlayer
c) Total Commander
d) Disabled WM menu .cab
e) Shutter sound disabling cab
4) Embeded software
a) Microsoft and Toshiba keyboards
b) ArcSoft software:
- MMS composer ( integrates with menu for SMS/MMS composing ) - very nice in my oppinion
- Streaming player
- Photo base
c) FDC task manager - powerfull system software
d) my own software for some power managment available as "Power" folder in Programs ( soft reset, standby, backligh off )
e) BT operations notification icon in upper bar - well known solution from other roms. I do not know whose software it is
nethertheless thanks the author for it.
f) Microsoft Office 2010
g) Java
h) Facebook application
i) Screen Capture
k) SRS WOW HD . End with with this awfull, well known strange 3 cab installation.
I did not notice any problem with stable work.
This software ( its usage ) has been improved by me. If anybody does not like this software or find it not stable ( after installing any additional software ) then one can disable it. It is not deinstallation ! One can switch between original audio drivers and SRS drivers. I created special directory ( SRSHD Manager ) for managing it and that is why I moved SRS control panel from "settings->system" to this directory.
You will find there 3 icons ( as on attached picture ):
- Control Panel ( well known )
- Disable ( disables SRS, enables original audio ) - one restart required after it
- Enable ( disables original audio, enables SRS ) - one restart required after it
Other registry tweaks. For example enabling old fashion lock screen which
saves 5MB of RAM in comparison to new fashion lock screen.
And of course my incerdible battery driver which allows all battery level sensitive software run without any problems until real 0% battery level without any interruption from the system. Never more 20% warning messages, software execution protection and battery discharge to real "0" - about 2.9V
For GPS users. I noticed that some people install new GPS driver as a cab. Why ? Does it work better than original ?
I always change GD9 in my roms to COM4 ( I do not even know if it is needed at all ) and have never had any problems
with Ozi Explorer, Garmin Mobile XT and AM . Maybe other navigation software have problems. I do not know. It would be nice
if experienced users write something here about it.
As usual ROM created via osBuilder and feropont kitchen so thank
Him for it.
After flashing hard reset is required ( via buttons combination or via "Master Clear" software in system settings ).
Enjoy
Regards
fxdjacentyfxd
Wow! you are our new ROM machine well done fxdjacentyfxd!
thats great! 140mb ram on boot with SPB! only 130mb available on 6.1 + SPB! new records! Cheers !
Regards
WM 6.5 Forever!!!! I'll test it tomorrow.
I'll update Rom table as well wit last news like yours.
Thanks again
That's just amazing. I will test ASAP. Thank you very much for your effort and your work.
olyloh6696 said:
Wow! you are our new ROM machine well done fxdjacentyfxd!
Click to expand...
Click to collapse
There is only one real "ROM machine" on the forum - mirolg . I am only software developer
and as You know I do not like cooking
olyloh6696 said:
thats great! 140mb ram on boot with SPB! only 130mb available on 6.1 + SPB! new records! Cheers !
Regards
Click to expand...
Click to collapse
He he, Oly I knew You would be pleased , You "ram eater"
Regards
fxdjacentyfxd
Pere said:
WM 6.5 Forever!!!! I'll test it tomorrow.
I'll update Rom table as well wit last news like yours.
Thanks again
Click to expand...
Click to collapse
I count on Your tests. In "static" applications it seems to be not worse than
my previous roms. My "divx banchmark" ( Matrix in 640x480 resolution ) is similar to this from previous roms. Especially I am interested in java. I only executed it to see if it works at all.
Regards
fxdjacentyfxd
Congratulations for your work.
Downloading and when can I test it.
I have no time !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A greeting.
koku37 said:
Congratulations for your work.
Downloading and when can I test it.
I have no time !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A greeting.
Click to expand...
Click to collapse
Thanks koku37. As I remember You were good tester of my previous rom
I count on You in tests too.
Regards
fxdjacentyfxd
from RomMachine to RomMachine, very,very good work!!!
ps. i like your lite battery tool and your new sddl+ tool! is a very big EVOLUTION for our tg01 device. and at now- i'm one of your greatest FAN's. RESPECT, my friend!
mirolg said:
from RomMachine to RomMachine, very,very good work!!!
ps. i like your lite battery tool and your new sddl+ tool! is a very big EVOLUTION for our tg01 device. and at now- i'm one of your greatest FAN's. RESPECT, my friend!
Click to expand...
Click to collapse
Such compliments from chef number 1.. I am proud
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Such compliments from chef number 1.. I am proud
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
yes, all is true. chef nr. 1, no,no our tg01 community need and loves all of the "little chef crew". we all specialised in different lines all for the tg01 community
cheers, miro
awesome rom but home soft button dont work for me, any tips? sorry 4 my bad english
paul89rulez said:
awesome rom but home soft button dont work for me, any tips? sorry 4 my bad english
Click to expand...
Click to collapse
Hi.
You mean enter into windows menu ? As You know it is disabled via disabling .cab in this rom ( You can unistall this cab ) so that to have more ram and because it is simply not needed with SPB shell.
Regards
fxdjacentyfxd
I'd like to test radio: 5007.0000.0321 on this ROM. Yes, yes, I know: I can change radio with awesome Miro's tool but ...well...I'm a bit lazy.... . Seriously, if any of you have already do it and can share it, I would be very gratefully
Best Regards
Pere said:
I'd like to test radio: 5007.0000.0321 on this ROM. Yes, yes, I know: I can change radio with awesome Miro's tool but ...well...I'm a bit lazy.... . Seriously, if any of you have already do it and can share it, I would be very gratefully
Best Regards
Click to expand...
Click to collapse
He he. I had dillema with what radio release this rom. 1600 I know and it works ok for me but who knows maybe 321 is better. I can prepare such rom but I will not test it. I have enough to configure my phone for work after every flashing but if You confirm after test, it is really better than 1600 I will test it too
P.S. As I well remember, some colleague wrote testing 321 radio that it generates certain error on roms different than Nokser's rom
but ...."the customer is always right"
Reagrds
fxdjacentyfxd
tx for anwer, but not the start menu, i mean the home button of phone, the left soft buttone in the low side of phone..hum.. dont know if u understand xD sorry again for my bad english, when i come back to home i post a pict with the button
paul89rulez said:
tx for anwer, but not the start menu, i mean the home button of phone, the left soft buttone in the low side of phone..hum.. dont know if u understand xD sorry again for my bad english, when i come back to home i post a pict with the button
Click to expand...
Click to collapse
Now I know, but frankly speaking I do not know whether it worked in my roms ever . I simply did not use it because I was still .... cooking. Maybe any of users of my previous roms could say more about it ? I have to check whether WM disable .cab works ok and is not responsible for this effect or maybe it is any feature possible to set in SPB shell. From my side I did not do any special to lock this button.
Regards
fxdjacentyfxd
ok, i do some test to see if i can help with this
edit: i ve removed your startmenu disable, reboot and nothing.. installe artos disable an remove start menu and same thing home softbutto still not working, maybe mirolog can explain why
paul89rulez said:
ok, i do some test to see if i can help with this
edit: i ve removed your startmenu disable, reboot and nothing.. installe artos disable an remove start menu and same thing home softbutto still not working, maybe mirolog can explain why
Click to expand...
Click to collapse
homesotbutton from spb shell not working or the winMo startmenu? my cab disabled the winMo startbutton + winMo startmenu. after remove this cab, you see the winMo startbutton + winMo startmenu. freeze your device if you like to go in today screen?
if yes check in registry hklm\software\microsoft\today if enabled is 1
mirolg said:
homesotbutton from spb shell not working or the winMo startmenu? my cab disabled the winMo startbutton + winMo startmenu. after remove this cab, you see the winMo startbutton + winMo startmenu. freeze your device if you like to go in today screen?
if yes check in registry hklm\software\microsoft\today if enabled is 1
Click to expand...
Click to collapse
mirolg, problem is that even after uninstallation of any .cab for WM disabling ( Your or Arto or my which is modification of Your cab ), soft key "home" button does not work. Maybe SPB shell does not serve it ? As I can see it has "home" icons in some places of its menus and they work - user "goes" to home. Not WM home of course but to SPB shell main "desktop".
I checked - enebled in registry is 1
regards
fxdjacentyfxd