Related
Which Radio ROM is the latest? And where can we get it?
THanks!
ulischultz said:
Which Radio ROM is the latest? And where can we get it?
THanks!
Click to expand...
Click to collapse
lates is this one v 1.58.25.14:
http://www.killou.net/mobile/cruise/Radio_1.58.25.14.zip
Mahmood said:
lates is this one v 1.58.25.14:
http://www.killou.net/mobile/cruise/Radio_1.58.25.14.zip
Click to expand...
Click to collapse
I have tried this but I cant get it to flash. I am already SPL'd. It goes into bootloader ok, then waits forever till it gives up and says connection error. I also tried disconnecting/reconnecting the usb cable when in bootloader (like the SPL procedure) to no avail. Any ideas?
How can i see which radio ROM is on my device pls ?
underzone said:
I have tried this but I cant get it to flash. I am already SPL'd. It goes into bootloader ok, then waits forever till it gives up and says connection error. I also tried disconnecting/reconnecting the usb cable when in bootloader (like the SPL procedure) to no avail. Any ideas?
Click to expand...
Click to collapse
Don't know if it can help but try with this package. It run on my TC.
geezar said:
How can i see which radio ROM is on my device pls ?
Click to expand...
Click to collapse
go to Start ==> Settings ==> Device Information
Try this - the update utility did not work. - Upload failed but I will try again
Don't panic stays on 99% for a little while
Check your radio start>settings>system>device information
hope this helps someone
nc35 said:
Try this - the update utility did not work. - Upload failed but I will try again
Don't panic stays on 99% for a little while
Check your radio start>settings>system>device information
hope this helps someone
Click to expand...
Click to collapse
I've forget a (important) detail. You've to manually put your device in bootloader mode (by pressing the camera button and push and do a soft reset).
As soon as you see the colored bootloader image, release the stylus from the soft reset hole. then release the camera button. Your device will stay in bootloader mode.
Run the ROMUpdateutility.exe (of course, your device must be connected to your PC ;-) )
underzone said:
I have tried this but I cant get it to flash. I am already SPL'd. It goes into bootloader ok, then waits forever till it gives up and says connection error. I also tried disconnecting/reconnecting the usb cable when in bootloader (like the SPL procedure) to no avail. Any ideas?
Click to expand...
Click to collapse
Put your device into bootloader mode first, then double click on the exe.
Rapidshare
http://rapidshare.com/files/95057124/Radio_1.58.25.14.html
Don't forget this will update your device so backup first pls
academic said:
I've forget a (important) detail. You've to manually put your device in bootloader mode (by pressing the camera button and push and do a soft reset).
As soon as you see the colored bootloader image, release the stylus from the soft reset hole. then release the camera button. Your device will stay in bootloader mode.
Run the ROMUpdateutility.exe (of course, your device must be connected to your PC ;-) )
Click to expand...
Click to collapse
This has worked fine... thanks matey
Yes well, I didn't put mine into bootloader mode first (cause I did it before this thread said to do that) and it failed at 99% and went though the HTC recovery instructions! Thankfully though it went through the 2nd time having launched from the bootloader.
Everything is working fine... any chance that something has got screwed up though?
Hi,
Can I have some infos on this new rom ?
What are the changes ?
Thx
Did the radio change will effect also my ROM ?
I want my rom to be left unchanged.
Also, what are the advantadges of this radio version ?
mattan said:
Did the radio change will effect also my ROM ?
I want my rom to be left unchanged.
Also, what are the advantadges of this radio version ?
Click to expand...
Click to collapse
1) Radio and O/S ROM's here may be flashed separately, so flashing this radio will not affect your current operating ROM, just update your radio ROM
2) I've just upgraded to radio 1.58.21.54 from 1.58.21.23. Everything works OK, I feel the WLAN is more efficient but too early to say what real differences may be
3) Instead of Async, I just use a FAT32 1Gb card with the *.nbh file on it with device in Bootloader mode
Is there any soulution to remove "Test Only Not For Sale" (Radio: 1.58.25.14), when the device starting?
ianl8888 said:
1) Radio and O/S ROM's here may be flashed separately, so flashing this radio will not affect your current operating ROM, just update your radio ROM
2) I've just upgraded to radio 1.58.21.54 from 1.58.21.23. Everything works OK, I feel the WLAN is more efficient but too early to say what real differences may be
3) Instead of Async, I just use a FAT32 1Gb card with the *.nbh file on it with device in Bootloader mode
Click to expand...
Click to collapse
Another question: Can I use SpbBackup to restore all my data after the radio update ? I know that I can't do it with rom update, but what about radio update ?
i don't know about using backup software, but i performed the radio update today, and none of the installed programs and my configuration was changed. everything worked as if nothing was done at all.
cortezzi said:
i don't know about using backup software, but i performed the radio update today, and none of the installed programs and my configuration was changed. everything worked as if nothing was done at all.
Click to expand...
Click to collapse
Thanks.
So I don't have to run HSPL, just enter bootloader mode ?
mattan said:
Thanks.
So I don't have to run HSPL, just enter bootloader mode ?
Click to expand...
Click to collapse
1) I hope you have first flashed Olipro's HardSPL version2 (only needed once but first) !! Then you can update/regress ROM's as you wish
2) Using Spb Backup after ROM flashing (either radio or O/S) works ok. It does not backup the actual ROM, but rather the directories in root, registry, PIM databases etc ... this backup is something I do after major changes like ROM upgrades anyway
I tried to cook my own ROM and when I installed, the installation was successful. But after that my phone does not start. when I click the power button, the phone does not boot.
My ROM size was close to 300 MB.
Any help is appreciated.
mukesh_thiru said:
I tried to cook my own ROM and when I installed, the installation was successful. But after that my phone does not start. when I click the power button, the phone does not boot.
My ROM size was close to 300 MB.
Any help is appreciated.
Click to expand...
Click to collapse
Phone doesn't boot? What do you mean doesn't do anything or gets stuck?
If your device turns on you could try to get in bootloader by holding volume down when turning on the device. If that works you can connect to usb and flash another rom
When I hit the power button nothing happens, the screen is black, the device does not start. No bootloader, no led light nothing, I tried hard reset, I tried the reset button.
When I was installing the custom ROM the battery was full. When I connect to USB, the computer says some Qualcomm device thats it.
If you cant boot in bootloader, then its screwed. But you said your pc sees it as qualcom device...so it probably ok.
Just put it in bootloader, and flash a stock ROM.
PC shows as "qualcomm cdma technologies msm". But nothing else not going to bootloader
Did your ROM had a radio in it or only the OS?
I guess only OS, I think I did not have Radio
Did you tried to leave the battery?
Which Original stock rom did you used for cooking your own? Have you a link?
Did you already searched in forum for a possible fix?
i found some links http://www.google.com/cse?cx=partne...mqefhnf&ie=ISO-8859-1&q=hd2+bricked&sa=Search
Give us as more infoes as you can.
HD2: Tmous or Htc brand?
HDSPL? Have you installed one?
It a tmobile. I used the Oskitchen and downloaded a stock ROM to start. I removed some of the items that I did not want, then after I did "start building". I took the "RUU_Signed_0409" from the output folder. I flashed this to my device.
HDSPL - http://forum.xda-developers.com/showthread.php?t=611433 I followed this tutorial.
Can you please let me know what you mean by "Did you tried to leave the battery?"
Leave the battery means Take out the battery for some times and then return it inside.
Did you dump a TMOUS Stock rom, right?
mukesh_thiru said:
It a tmobile. I used the Oskitchen and downloaded a stock ROM to start. I removed some of the items that I did not want, then after I did "start building". I took the "RUU_Signed_0409" from the output folder. I flashed this to my device.
HDSPL - http://forum.xda-developers.com/showthread.php?t=611433 I followed this tutorial.
Can you please let me know what you mean by "Did you tried to leave the battery?"
Click to expand...
Click to collapse
Yes tmobile stock ROM
mukesh_thiru said:
It a tmobile. I used the Oskitchen and downloaded a stock ROM to start. I removed some of the items that I did not want, then after I did "start building". I took the "RUU_Signed_0409" from the output folder. I flashed this to my device.
HDSPL - http://forum.xda-developers.com/showthread.php?t=611433 I followed this tutorial.
Can you please let me know what you mean by "Did you tried to leave the battery?"
Click to expand...
Click to collapse
Can you please compress the ROM and upload it somewhere so we can take a look? If you didn't select splash screen or radio the ROM should contain only the OS section and therefore be safe to flash.
MOD EDIT: removed link because not safe,PM OP for link. thanks.
@ Airxtreme:
Did you see his prvious post? See below, he hisnt totaly sure by Radio.
Most TMOUS mobiles Rom upgrade failure are due to flash a non compatible RADIO , its not safe to flash the rom linked.
Im removing the link, if someone wanna try what Airxtreme suggested, please share it by PM....sorry but i do not want some noobs complaining for his phone bricked.
mukesh_thiru said:
I guess only OS, I think I did not have Radio
Click to expand...
Click to collapse
airxtreme said:
Can you please compress the ROM and upload it somewhere so we can take a look? If you didn't select splash screen or radio the ROM should contain only the OS section and therefore be safe to flash.
Click to expand...
Click to collapse
mukesh_thiru said:
MOD EDIT: removed link because not safe,PM OP for link. thanks.
Click to expand...
Click to collapse
Sorry but the archive seems to be corrupted however from the part I could extract it looks like the ROM file except for the fact that it's 400mb big (but it shouldn't be a problem if yours is a TMOUS phone) has only the OS section and that means it should have been safe to flash. Try removing the battery as suggested, unless you have issues with your computer's USB or some other application messing up the RUU updater the phone shouldn't have been permanently bricked also when you turn it on to enter the bootloader mode try doing it with the phone not connected to the computer maybe it just doesn't like the USB port.
af974 said:
@ Airxtreme:
Did you see his prvious post? See below, he hisnt totaly sure by Radio.
Most TMOUS mobiles Rom upgrade failure are due to flash a non compatible RADIO , its not safe to flash the rom linked.
Im removing the link, if someone wanna try what Airxtreme suggested, please share it by PM....sorry but i do not want some noobs complaining for his phone bricked.
Click to expand...
Click to collapse
From what I saw there is no radio in there and the archive wouldn't even extract so I don't think there is any risk about somebody flashing that file.
Yeah i see that it is corrupted, but you know ....i have seen some recent post in Kaiser forum with people with Different phones then the Kaiser, asking in Spl thread how to install it on their phone....so better dont risk imo
airxtreme said:
From what I saw there is no radio in there and the archive wouldn't even extract so I don't think there is any risk about somebody flashing that file.
Click to expand...
Click to collapse
made this video for anyone whos unsure on how to do it, hope this helps someone.. feedback apreciated
INFO FROM VIDEO DESCRIPTION INCASE ANYONE NEEDS IT
In this video i show you how to install windows phone 7 to your htc hd2.
DO THIS AT YOUR OWN RISK
WP7 STOCK ROM + MAGLDR 1.12 + LATEST LEO512/1024 RADIO
http://www.mediafire.com/?dx3k459a2k3m3dr
ZUNE Software (Sync Music, Video, Pictures & Apps)
http://www.mediafire.com/?pesqg3asdoghea3
____________________________________
POSSIBLE WIFI FIX: PULL OUT your SD CARD and RESTART your PHONE
IF YOUR HAVING ISSUES WITH MOBILE DATA (INTERNET) NOT WORKING THEN CHECK OUT MY POST ON XDA, I HAVE TRIED TO INCLUDE AS MANY CARRIERS AS I COULD, IF YOU HAVE ANY THAT I COULD ADD THEN PLEASE LEAVE THEM IN THE COMMENTS
http://forum.xda-developers.com/showpost.php?p=10635210&postcount=1
____________________________________
HOW TO INSTALL HSPL
NOTE:To install this HSPL there must be SPL 1.42.0000 on your device. Otherwise the installation will fail! To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM with this SPL version.
1. Download HardSPL package from http://www.mediafire.com/?44nvdoc45zykmen and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL3_PKG.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
5. The program will now check the usb connection and enter bootloader screen (tri colour)
*You can select between SPL2.08.0000 or 2.08.HSPL. This is to avoid people with 1024LEO's installing an incompatable version and bricking their device*
6. Select 2.08.HSPL for HardSPL and click NEXT.
7. Your choice will be flashed to your phone.
8. When its finished the HardSPL program will pop up a box saying "Successfully Done" and the phone will reboot.
9. Click ok to terminate program.
10. Congrats, you just flashed HardSPL.
____________________________________
Visit this site for information on dual booting android and WP7, the site is in Chinese so it has to be translated but the instructions are clear enough.
http://translate.google.com/transla...rcesteam.com.cn/thread-25910-1-1.html&act=url
Thank u - good guide!
Sent from my HTC HD2 using XDA App
can i flash back to wm mobile if i flashed wp7?
peeewee said:
can i flash back to wm mobile if i flashed wp7?
Click to expand...
Click to collapse
yes, just flash a stock or custom rom back to your phone
Download
Hi where do i get to download it? please...
Thanks!
Can you post the link?
TheAgent1982 said:
Hi where do i get to download it? please...
Thanks!
Can you post the link?
Click to expand...
Click to collapse
its in the description
thanks, i needed this guide!
Any chance you want to make a video of how to get the market working?
saw the video and i must say it's pretty straight forward, well done mate! this should be a sticky topic i reckon. although i'm quite happy with my hd2 running android and have no plans of flashing to w7, i'll keep this in mind should i decide to take the plunge. much appreciated.
Dear People
i was trying to install WP7 on my HD2. I did not check my HSPL version I guess it is 1.42
I downloaded the rom and installed MAGLDR112
It iis displaying white screen with a message this operation will delete all your personal data and reset all setting to manufacture default Press volume UP and all
It is not entering in bootlegger mode what shall I do please help me guys
Thanks.. it's a great vid!!! juz a question, how do i go about flashing back to WM6.5 custom ROM??
isit the usual way by entering boot mode and use customRUU to flash any workable ROM??
blacker87 said:
Thanks.. it's a great vid!!! juz a question, how do i go about flashing back to WM6.5 custom ROM??
isit the usual way by entering boot mode and use customRUU to flash any workable ROM??
Click to expand...
Click to collapse
yep that is it.
Thanks....!!
deadman_walking1 said:
Dear People
i was trying to install WP7 on my HD2. I did not check my HSPL version I guess it is 1.42
I downloaded the rom and installed MAGLDR112
It iis displaying white screen with a message this operation will delete all your personal data and reset all setting to manufacture default Press volume UP and all
It is not entering in bootlegger mode what shall I do please help me guys
Click to expand...
Click to collapse
You need to only hold volume down (not both Up and Down) and then switch device on
Could someone please HELP !!!!
i flashed the WP7 ROM from DFT everything works fine except for my memory card, the phone seems like it dsnt read anything from the SD card as if it wasnt there ?
What should i do
windows live id?
having trouble signing in with windows live id everytime i try it says my windows phone needs to be activated is this right or am i doing something wrong?
Thanks in advance mimic
cd78 said:
Thank u - good guide!
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
just can not run a 1.12 on his MAGLRD HTC HD2. I uploaded all HSPL as explained in the post to install WM7, but could not go. Does anyone know where I go wrong? MAGLRD start, the screen on the HTC HD2 blacks, but not to go to load is about 5 minutes to 0%.
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Dukan91 said:
Could someone please HELP !!!!
i flashed the WP7 ROM from DFT everything works fine except for my memory card, the phone seems like it dsnt read anything from the SD card as if it wasnt there ?
What should i do
Click to expand...
Click to collapse
Many sd cards are not recognised/compatible with WP7. You'll see a thread in this forum dealing with the compatibility issue and trying to identify which sd card types do work.
mimicuk said:
having trouble signing in with windows live id everytime i try it says my windows phone needs to be activated is this right or am i doing something wrong?
Thanks in advance mimic
Click to expand...
Click to collapse
That's right you need to get a Windows live activation code from MS. There is a hack that needs to be applied to "trick" the market into thinking the device is an HD7, but you still will need the activation code. See here
saletije said:
just can not run a 1.12 on his MAGLRD HTC HD2. I uploaded all HSPL as explained in the post to install WM7, but could not go. Does anyone know where I go wrong? MAGLRD start, the screen on the HTC HD2 blacks, but not to go to load is about 5 minutes to 0%.
Click to expand...
Click to collapse
Do you have hspl of 2.08.hspl or 2.08.0000. You need the hspl bit at the end. Also do you have a 50 series radio of at least 2.08.50 installed?
idono said:
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Click to expand...
Click to collapse
You will need to manually enter your APN details.
idono said:
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Click to expand...
Click to collapse
you need to use APN settings, google your apn settings for your operator then enter them into the settings menu
i have here my phone htc hd2 i update the rom,but it stock to 8% then i tried the sdcard process but it also stock at around 5%...now whenever i start my phone it have a error saying software update failed please try again..i did a couple research and i think i will not supposed to do it by my self..,i need a professional and experienced dude to pLEASE help me with this.,,please please please...im a newbie here,,
what are you updating? the windows mobile rom 6.5?
luciferps said:
what are you updating? the windows mobile rom 6.5?
Click to expand...
Click to collapse
no sir i just wanna open up my phone..,i dont know 1 day it was working fine then the battery drained then when i open my phone it was stock at stick together screen..so i plan to update the rom.,,,I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside? I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
hope you can help me sir..i see there that we have the same phone..,
btw here what in my rainbow screen
RUUNBH
PB81120 SS-B3
SPL-2.08.HSPL 8GXE
0x05
CotullaHSPL 0x05
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
WHen i was googling rom version 2.13.531, i happened to notice this post, from september 2010, , , (source)
Thank you for the reply.
I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside?
I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
Click to expand...
Click to collapse
call me Mr suspicious, but compare the wording to your post...
miko30 said:
no sir i just wanna open up my phone..,i dont know 1 day it was working fine then the battery drained then when i open my phone it was stock at stick together screen..so i plan to update the rom.,,,I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside? I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
hope you can help me sir..i see there that we have the same phone..,
Click to expand...
Click to collapse
amazing that two posts, almost two years apart are identical.
samsamuel said:
WHen i was googling rom version 2.13.531, i happened to notice this post, from september 2010, , ,
call me Mr suspicious, but compare the wording to your post...
amazing that two posts, almost two years apart are identical.
Click to expand...
Click to collapse
ahaha,,sir i copied that post and post it here because we have the same problem here..,and that post didnt give any idea how can i fix it..,so i tried here at xda dev.forum ..maybe someone can help me.,, i cant find any stock rom for my phone..and also i didnt know what current rom applied to my phone.,
all i just want is boot my phone back to its life.,,please please help me..im trying to fix this phone all day and nothing works..,until now im still searching to make my phone boot..,its allready 12:05am here gotta go to bed now..and i hope someone tommorow can help me thru this.,,THAnks btw for your reply
lol, fair enough.
ok, take the ROM.exe (that you downloaded from t mo,, it is definitely a tmous, right? green send key?)
anyway, right click the .exe file,, choose rename, change the .exe to .zip, then double click the zip file to open it, find Ruu_signed.nbh, extract it, rename it to leoimg.nbh , copy it to an Sd card that is 4GB or smaller (important, bigger cards won't work)
card into phone, reboot into bootloader, flashing should staRt. tell us what the blue writing on grey background says.if you don't see it you did something wrong.
samsamuel said:
lol, fair enough.
ok, take the ROM.exe (that you downloaded from t mo,, it is definitely a tmous, right? green send key?)
anyway, right click the .exe file,, choose rename, change the .exe to .zip, then double click the zip file to open it, find Ruu_signed.nbh, extract it, rename it to leoimg.nbh , copy it to an Sd card that is 4GB or smaller (important, bigger cards won't work)
card into phone, reboot into bootloader, flashing should staRt. tell us what the blue writing on grey background says.if you don't see it you did something wrong.
Click to expand...
Click to collapse
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
miko30 said:
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
Click to expand...
Click to collapse
If you are absolutely sure that the ROM you downloaded (and the radio it contains) are the right ones for your phone, then go to the boot loader and see what it says for SPL. If you do not find HSPL, flash HSPL 2.08 and then try the ROM.
Flashing aborting or getting stuck early on is an indicator of the flashing process bring stopped by SPL...
Swyped from my HTC HD2 using XDA Premium
miko30 said:
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
Click to expand...
Click to collapse
Samsamuel can tell you better but it sorta sounds like yet another stuck radio seeing as it is hanging at the 5% to the 8% area during flashing. I am not sure exactly when but hang in there and let Samsamuel post again he can give you your list of options better than I, hope you get it going again my friend.
---------- Post added at 11:08 PM ---------- Previous post was at 11:03 PM ----------
ph03n!x said:
If you are absolutely sure that the ROM you downloaded (and the radio it contains) are the right ones for your phone, then go to the boot loader and see what it says for SPL. If you do not find HSPL, flash HSPL 2.08 and then try the ROM.
Flashing aborting or getting stuck early on is an indicator of the flashing process bring stopped by SPL...
Swyped from my HTC HD2 using XDA Premium
Click to expand...
Click to collapse
If it was a SPL issue then that means it is a CID or a MID issue and if it is that then the Rom would not even start to flash at all no matter if it is via RUU or SD card. If the CID or the MID is wrong it would through a error saying something like "CID mismatch" or "Model I'D mismatch" when trying to flash.
T-Macgnolia said:
Samsamuel can tell you better but it sorta sounds like yet another stuck radio seeing as it is hanging at the 5% to the 8% area during flashing. I am not sure exactly when but hang in there and let Samsamuel post again he can give you your list of options better than I, hope you get it going again my friend.
Click to expand...
Click to collapse
how can i check my radio version?? i cant boot my phone.,,when i open my phone it says software update failed please try again..,before i change my spl..the version that i got there is (spl 2.10) then i change it to (2.08) so i can try to reflash thru sdcard..btw i got the rom from the htc-tmobile website,.it something like 3.xx.xx.xx like that...i dont know where i can find a stock rom for my phone...please help..
HERE THE VESION IM TRYING TO UPDATE MY PHONE..I GET FROM TMOBILE WEBSITE version 3.14.531.1
anyone?? what if i try to use a diff radio like this radio LEO 2.15.50.14 ??
miko30 said:
how can i check my radio version?? i cant boot my phone.,,when i open my phone it says software update failed please try again..,before i change my spl..the version that i got there is (spl 2.10) then i change it to (2.08) so i can try to reflash thru sdcard..btw i got the rom from the htc-tmobile website,.it something like 3.xx.xx.xx like that...i dont know where i can find a stock rom for my phone...please help..
HERE THE VESION IM TRYING TO UPDATE MY PHONE..I GET FROM TMOBILE WEBSITE version 3.14.531.1
anyone?? what if i try to use a diff radio like this radio LEO 2.15.50.14 ??
Click to expand...
Click to collapse
I do not want to highjack this thread so after this post I will be contacting you via PM, or if you use G Talk you can hit me up on that. If you have a TMOUS HD2 I have the 3.14 stock RUU for theTMOUS HD2 on my computer and I can upload it for you if you want. But I think the ROM you have is the same as the one I have.As far as checking your radio version if you can not boot your device at least to the T-Mobile screen with the red text at the bottom left corner then you can no check your radio version.
T-Macgnolia said:
I do not want to highjack this thread so after this post I will be contacting you via PM, or if you use G Talk you can hit me up on that. If you have a TMOUS HD2 I have the 3.14 stock RUU for theTMOUS HD2 on my computer and I can upload it for you if you want. But I think the ROM you have is the same as the one I have.As far as checking your radio version if you can not boot your device at least to the T-Mobile screen with the red text at the bottom left corner then you can no check your radio version.
Click to expand...
Click to collapse
do you have any facebook account sir,,maybe we can contact each other thru facebook..,yeah maybe that should work 3.14 ruu sir..,can you upload it on mediafire sir if its ok to you..and i cant go thru that t mobile screen with red text sir, when i open my phone it just stuck on black screen with a message "software update failed please try again.." and whats up with the vibrating?? my phone keeps vibrating..
yea I'm with TMacgnolia, , sounds like a stuck radio (albeit it's sticking earlier in the process than expected, perhaps indicating the stuck spl variant.)
combined with the vibrating I'd be thinking hardware, so I'd be trying sd flashing using the freezer trick.
samsamuel said:
yea I'm with TMacgnolia, , sounds like a stuck radio (albeit it's sticking earlier in the process than expected, perhaps indicating the stuck spl variant.)
combined with the vibrating I'd be thinking hardware, so I'd be trying sd flashing using the freezer trick.
Click to expand...
Click to collapse
sir yeah we manage to install a custom rom but the problem now is i think its on the cpu..,is there any way to fix this hardware problem..,
I could use some help, having the problem described earlier. I can't get past the 4color boot loader screen, - for a fraction of a second it goes to the insalling screen then comes back to 4color with "Serial" in the white.
Here is what I have on my HD2: Android 2.3.5 Radio 15.42.50.11U_2.15.50.14
Here is what I have tried to install through sd card: RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2.10.50.26_Signed_LEO_Ship.zip (renamed .zip, was .exe) and T-Mobile_HD2_MR_Software_3.14.531.1.zip (renamed .zip, was .exe)
I tried 3 different sd cards; (2) 2 gig cards (1) 4gig cards. I reformated several times before copying and renaming the nbh file.
What next? Thanks
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
samsamuel said:
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
Click to expand...
Click to collapse
Thanks. That makes sense. I can't check for 6 or 7 hours until I get home for the day. I'm using W7, and have never really gotten how to view the real extension on a file, not like the good old DOS days. yes I have a tmous. After requesting the help, I tried the same card in my brother's HD2 that I need to restore as well, and got the same response, so it has to be the card/name not my HD2. I'll post back when I check it out. Thanks again.
samsamuel said:
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
Click to expand...
Click to collapse
I renamed the file, making sure there was only one .nbh extension. Still not working. I tried it with both tmos roms, I reformated the card, I tried it on both phones. Obviously, I have done something wrong with the file, but read and re-read the instructions and I can't find what it is.
Any ideas would be great.
I downloaded Shipped ROM. I extract it and rename RUU_signed.nbh file into LEOIMG.nbh
After that, i copy the LEOIMG.nbh file into sd card. Restart hd2 by press power off + volumn down and process update
It can't install RADIO and failed by this step(pls see attach file).
Please help me to overcome this matter.
Thanks!
Long.lv
[email protected]
Which HD2 version do you have?
What is the name of the ROM that you tried to flash?
Do you have HSPL? (<has nothing to do with the error, just out of curiosity)
How big is your SD card?
Marvlesz said:
Which HD2 version do you have?
What is the name of the ROM that you tried to flash?
Do you have HSPL? (<has nothing to do with the error, just out of curiosity)
How big is your SD card?
Click to expand...
Click to collapse
My HD2 model is T8585.
The ROM i used: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
HSPL 2.08
What can i do now?
That should have worked, you might have a borked radio.
Try the flash again, if it fails again try a custom ROM (that does not include a radio) and report back.
orangekid said:
That should have worked, you might have a borked radio.
Try the flash again, if it fails again try a custom ROM (that does not include a radio) and report back.
Click to expand...
Click to collapse
I dont know what Rom you mention above??
I should download what custom Rom type, give me the certain name?
Thanks!
longit29 said:
I dont know what Rom you mention above??
I should download what custom Rom type, give me the certain name?
Thanks!
Click to expand...
Click to collapse
By which HD2 version, I meant European or Tmobile one.
Anyway, it doesn't matter now.
Just flash the same ROM using HSPL. (double-click on the_rom.exe)
(Additional Step: If you want to remove HSPL completely, run HSPL4 and select an SPL from the drop down menu)
(welcome back, orange kid )
Marvlesz said:
By which HD2 version, I meant European or Tmobile one.
Anyway, it doesn't matter now.
Just flash the same ROM using HSPL. (double-click on the_rom.exe)
(Additional Step: If you want to remove HSPL completely, run HSPL4 and select an SPL from the drop down menu)
(welcome back, orange kid )
Click to expand...
Click to collapse
It is European. I also tried install Radio individually but it failed.
What i have to do next?
Long.lv
longit29 said:
It is European. I also tried install Radio individually but it failed.
What i have to do next?
Long.lv
Click to expand...
Click to collapse
v This .. (of course phone is already connected to the pc in bootloader mode)
Anyway, it doesn't matter now.
Just flash the same ROM using HSPL. (double-click on the_rom.exe)
Click to expand...
Click to collapse
Marvlesz said:
v This .. (of course phone is already connected to the pc in bootloader mode)
Click to expand...
Click to collapse
I'm sure my phone is broken down in RADIO. I tried to set up RADIO in some ways:
Download shipped ROM, extract and rename to leoimg.nhb, then copy it to sd card
Download RADIO file indiviually, and set tup, it also error.
You can see the attach file for further details. And give me some guides to overcome this.
Long.lv
Google "stuck radio" and prepare for disappointment.
Things worth trying -
1 SD flash of CORRECT stock rom after
freezing phone for half an hour (Freezer trick)
2 JTAG