well I think I misread the threads. I understood that since my htc was unlocked that I could flash a spanish rom to it and I went ahead and flashed it it is a cingular 8125 well after the flash ended now the htc8125 only turns on in the three color screen and it says.
IPL 2.25.0001
SPL 2.25.0001
what I am supposed to to now is my phone bricked. help please.
Well you should flash your phone with this "ROM" and then do some more reading.
thank you myhtc but will this get my phone working again or can you please point me in the right direction. Also I can not download from the link that you posted can you upload it somewhere else please.
Reflash using the wizard love rom. You might have trouble finding it if the link I have included is dead. Thats the only sure way. And make SURE your battery is full or at least 75% when you do this.
http://rapidshare.com/files/23763082/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
i was finally able to download wizard love how do I use even though the wizard turns on it seems like it dont want to connect using active synch what am supposed to do
Well after trying and doing a lot of reading and with the help of some members from this forum got my htc working again and got a spanish rom too.:d this is what i had to do
flash my device using the wizard love rom
flash my device with hard spl
and finally flash the spanish rom
thanks a lot forum.:d
Related
hi,
i have just downloaded the radio stack from O2 v4.21. I have tried to upgrade through active sync 3.71 it upgraded ok, but when i went to restart the XDA it gets stuck on the boot screen. the one that says test not for resale... and at the bottom right hand corner its says A.30.07 and then locks up.
normally before i tried to upgrade it said A.30.07 the underneath it said 4.20...
anybody know what i need to do to correct it?? i have looked through loads of forum posts and now i'am really confused???
Thanks alot
Zetex :?:
a bit of further info my Bootloader on my xda1 is 5.22
I'am also willing to pay for help i recieve to get my xda up and running again, because without it i really i'am stuck. I don't just use it as i gadget i use for everyday work/pleasure...
Thanks alot
Zetex
can anybody help me????
Hi,
No experts or semi-experts seem to be offering any help. I consider myself a fairly experienced novice so I am not sure how useful (or safe) my advice is. Take care! But here are my observations..........
You say the upgrade went OK? Does this mean you got as far as the message Flash Complete! Press OK to restart your device?
If so, this is encouraging as most of the problems I've located on this forum stopped part way through the upgrade (many at 1%).
Did you follow the instructions accompanying the upgrade to the letter? (ie. kill all running programs, switch off phone etc.)
The 4.21 upgrade is for the PW10A1 model not the PW10B1 (check the back of your xda's case to find out). Not sure how you deal with this one if yours is a PW10B1.
Can you enter bootloader mode? (soft reset with the stylus while holding the power button). If so, this is also good news. Someone with more experience than me could probably tell you what to do next. (Possibly flash a new ROM using the SD card method. Although you upgraded the Radio Stack it may have corrupted or upset your Radio Unit/'ROM'. If you decide to do this, I suggest something based on the v3.17 such as the XDA developers special edition ROM ..... you can always upgrade to WM2003 again later.).
Good Luck!
[/b][/u]
cranny,
Thanks alot for the reply m8, I did try what you have suggested by reloading the 3.17 o2 rom via sd card and now it won't even switch on anymore.
not to worry its gone off to the xda repaire center in Norwich today for repair under warranty.
Thanks for the reply anyway m8
Zetex
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
What rom are you trying to put on? If you have the problem i think you have, i would not go around asking everyone cus you will get smoked! As its on here like a million times!
First off take your storage card out.. .. send off, flash back to original carrier rom... leave storage card out and flash again..
....
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
where can i find th original t-mobile 1.08 rom for the mda....
i cant seem to find it nowhere....
i had the same problem wen i was upgradin to wm6
I guess it does offend the moderators because I just posted the same question after searching and searching for weeks on resolution on this issue. They toasted my thread, probably this one too and I hope they don't because after reading 100+ posts on this topic, there was no resolution. Of course I tried without the SD card. I tried the 1.05 ROM as well as xenin's T-Mobile 2.26 ROM with built in CID unlock and both froze at 98%. By the way is your QTEK 9100 from the factory because mine is and I think this is the common denominator in this problem. Please someone help cause I'm probably new to this forum (not to howardforums) but I know my phone stuff so this is a real issue! Thanks in advance and pls do not delete this thread. Thanks.
sunycheeba416 said:
... T-Mobile 2.26 ROM with built in CID unlock ...
Click to expand...
Click to collapse
You better start re-reading the 100+ posts!
First of all your WIZ needs to be CID unlocked - a 'build-in' CID unlock in a ROM you're trying to flash will not help!
I understand that. That was my second way of trying to resolve it. I originally followed the "The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards" post and followed it word for word (and read all 36 pages). I tried flashing buttons 1.05 ROM (http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html) and got the 98%. The second time I thought I'd give it a shot and tried xenin's T-Mobile ROM with built-in CID and it froze at 98% too! My suspicion is that there is something different about factory phone than SP branded phones. Anyone else?
I also rebooted my PC and phone. Deleted all my session temp files. Tried 3 different computers. Tried without SD card. Everytime I it froze at 98% and had to revert back to the original QTEK 9100 ROM (2.17). And just for kicks I tried installing T-Mobile's original 2.26 ROM and it gave me a "vendor match" error, meaning it's still CID locked.
Umm, if you bought it straight from HTC/Qtek, wouldn't it already be unlocked? From your last post, it seems you do not have a branded or locked phone...
It is SIM unlocked which means I can use an SIM card. BUT it is not CID unlocked meaning that I can't flash the ROM to another maker's ROM (like QTEK to T-Mobile or QTEK to Cingular or QTEK to Custom ROM).
I wsa thinking that HTC and QTEK have tight bonds and was wondering if I can make the jump to an HTC ROM and CID unlock it from there. Not sure if that makes a difference. Kinda stuck
gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
You must flash a FULL carrier 2.xx rom before flashing any custom rom from this site (other than the ones used for CID unlocking)
You will have issues if you skip step 17 of the Definitive guide to Unlocking and Upgrading G3 Wizards (Sticky in this forum).
hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
SPL 1.05
I'm kinda of new too, but I believe you just have to pick the rom u want to flash up to. U r at the ideal ipl & spl. I just did that to mine about a week ago and then flashed it EXACTLY like forum said and then just update to 3.XXIPL & 3.XXSPl. After which I picked 1 of the TNT rOMs and wella! try to flash it up now
i dont know wheres to find the roms do you have a link or something
Have you CID unlocked yet?
Obviously not unlocked yet!
Cause he stucks on step 1 !
hahahaha upgrade an original rom... try the 2.26 tmobile not 3.08 please...
Hey Que
I will be getting T-Mobile any hour today...
I will be following all the instructions and try to use a Cingular card on it.
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
hydafl said:
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
Click to expand...
Click to collapse
Your phone is running the official cingular stock rom and has official IPL/SPL 2.25 (Bootloaders),its nothing to be worried about,now it depends if you prefer to reflash the official wm5 rom or wud like to upgrade to latest wm6.1 custom build roms.
If you want to keep official then download the official wm5 stock rom and simply flash it,but if you desire to upgrade to latest wm6.1 rom,as no official wm6 roms are provided,therefore,you'll have to flash a custom build wm6.1 rom,and for that you'll have to get your phone CID unlocked.
my phone is in boot mode i dont have the roms im new wheres can i find the rom that you say the tmobile my phone was with the original cingular rom or where can i find the original one
mmmmm ok!
I dont have the link but you an enter in wiki section for wizard... is a thread that said wizard goes wiki click there and then it tooks you to the wiki pages! there... you can found a link that takes you to the original roms... choose the one you see for cingular..... some links are broken so dont desperate maybe we can found other one... if you dont get it there you can choose the search tool just follow my steps on my signature says The XDA search culture...
Dont be afraid men you only need to use some more things to start unbricking your phone... (I hope so) many things tooks time cause we dont read enough now lets work men!!!
Well avoiding duplicatted posts this is gonna change many times
Here is my RUU without ID http://forum.xda-developers.com/showthread.php?t=429327&page=9
I didnt found the cingular but try to unzip the exe file with winrar... the nk.nbf can be cutted and pasted in the RUU folder to upgrade it without ID vendor permissions... we will on touch men!
Xplain more
Xplain more of your problem remember that unlock upgrade flashing dids most be done on XP and without SIM and MiniSD pluged... be sure your batt is full charged and your USB cable dont have troubles.
Can you privide more info abour exactly what you have done... please men we need all you got
OH remember not to use so much your phone on Bootloader screen cause we need the batt almost 70% to downgrade unlock and upgrade again it dont charge in RGB screen.
About getting official Wizard Cingular ROMs.
I called HTC and Cingular they say that HTC is not licensing the Wizard WM6 from Microsoft anymore, so they are not supplying the ROMs for the public.
No official support from Cingular/HTC on Wizard for WM6 or 5 for that matter.
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
hydafl said:
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
Click to expand...
Click to collapse
First,always post the DOC Chip version of the phone,what is the IPL/SPL of the phone.
Secondly,what exactly is the problem and what you want to do ?
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
hydafl said:
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
Click to expand...
Click to collapse
Its a G3 version,download the official stock wm5 rom from here and flash it:-
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
But,if you want to upgrade to latest wm6 then follow this link and do it correctly as the guide reads :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Good luck
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
hydafl said:
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
Click to expand...
Click to collapse
G3 devices don't get Bricked like this,by just flashing a rom,untill and unless you have flashed any G4 IPL/SPL on it,otherwise,G3 phones never get Bricked.So most probably its the battery,try to get the battery charged or get another battery from a friend and confirm it.
As an update and thank you very much. I purchased a new battery and the the store was good enough to pre charge it. We installed the above official wm5 file and its currently going throuh re updating itself. I did happen to notice that it now has an AKU2 file. Is this an update over and above what I had originally?
Once again thanks....
Are there any problems with 3G sim cards because when I installed the card the phone reacts as if there is no battery. No charge indicator or any activity.
Problem solved, it helps to have the sim card properly seated.......
Thanz!
You are most welcome,glade its working.
Yes,the above rom is AKU 2,its an upgrade to your previous official Rom,always try to keep the battery fully charged,as it creates many problems if it gets below the required retention charge of 30%.
Try out the Guide I posted above and see if you can get it CID unlocked and upgraded to latest wm6.1 rom,thats where the fun begins....!
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
almost 50 views and no help
somebody please help me out
Goshdarn invalid vendor id
megagprime said:
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
Click to expand...
Click to collapse
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
ookba said:
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
Click to expand...
Click to collapse
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
sorry about the late reply
i have tried the willow spl (that was my original path)
didn't work can get my spl hard lol
still need help, i think she is bricked
i got the ceda100 boot loader up and cant flash willow or cedar hard spl.... or anything and it doesnt even boot up into windows or anything anymore possibly shes a nice shiny brick
ariesq said:
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
Click to expand...
Click to collapse
hey i got another snap and am ready to flash again but dont really want another paper weight, all i really need help with is usb tethering that doesnt use pam/let my carrier know i am tethered....
i need internet connection sharing like my snap needs a hard spl
different computer, cables, compatibility modes, etc
nothing works
My friend
i have the exact same problem
Bieng researching for the past few days, spent hours on this
Did u find a solution?
I could really use some help right now
Thanks
Hi
Please be sure your phone is HardSPL before testing/using this rom.
download below rom and happy using win 6.5
http://www.mediafire.com/?s59k13tugcw03i4
i am using this on my ALLTEL HTC SNAP SMT 6175
WORKING FINE.
[email protected]
bye/punnoose
I just got a used HTC Universal. It had a generic WM5 install on it. I came here, looking for a WM6.x ROM. A couple years ago, I had great success doing this with an HTC Wizard (which I still have) -- I know how to flash a ROM. However, with the Universal, I am not having any luck.
The device comes up in bootloader mode just fine. But no ROM I have tried, ever boots up. I have tried the MTTY DOC format, I have tried using MaUpgradeUT, I have tried using the ROMUpgradeUT.exe that comes with the ROM's... nothing seems to work. If I understand the various posts here -- the device is acting like the Carrier ID is still set, and no ROM will work until I clear the CID and/or find a ROM that matches the CID. But, I thought that the MAUpgradeUT was supposed to clear out the CID? Is there another utlity for that?
I have spent basically 8 hours today, trying to get this to work... I am willing to ship this to someone in the US and pay $$$ to get it working again. It's a nice device (looks brand new) and I really want to use it. It was working just fine on WM5, until I got the bright idea to re-flash it.
Can anyone help?
hi again... found a copy of TML v8[1].7.1 21028 regular 64MB and IT WORKED!. My phone is no longer stuck in bootloader limbo.
however, this ROM seems to be hard-wired to look for a TMobile network? I have an AT&T GSM SIM... my phone isn't connecting to my provider, at the moment.
THanks to all for past and future help.
--- KSandbergFL
Closing thread as you solved your problem on other thread.
Please next time do not open multi threads for the same topic and we recommend you to not offer money as XDA is about helping and sharing, instead you can donate to the member who helped you