Database Users

MDA Questions after a week of use...

Hello...
I recieved my MDA last saturday, and since then, have been trying to figure everything out. After multiple calls to tmobile, and even a trip back to the store, i'm still stuck with a few questions that i cannot seem to get answered.
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Ex: I'm using a green theme. When in landscape mode, i have a single green square in the middle of the screen with a strip on either side(left or right)
2. My phone is HORRIBLY slow when and if ANYTHING 3rd party is installed. I've tried today plugins that control the memory usage(figured that would help)...however, it just slowed things done. My phone usually runs at about 14mb Free Program Memory, out of the total 44MB(This seems horrible...with just the default programs installed*for the most part* and maybe agile messenger running.). If i install a today plugin, or a game...this drops below 10mb. Therefore, phone usage can be very aggravating. I cannot think of any other way to increase this memory expect for ONE thing. Would it be possible to transfer ALL programs, applications, etc to the miniSD Card(i have 1gb now, with a 2gb in the mail). This way...i certaintly would not be topping out the usage of the card, and hopefully I can free up alot of space on the phone.
3. As we all know, the packaged IM programs are AWFULLY slow and inconsistent. After a bit of research and trials, I have settled on using Agile Messenger. I'm loving it...expect for a few things.
The MAJOR problem I have with it, is the pop up notification. Its annoying to be surfing the web or playing a game, just to have a pop up tell you that you have recieved a message, EVERY TIME you get a new message(which can amount to a great deal in a short time). I've looked all over for a setting, so unless I missed it, is there any way to shut this off?
A side issue with this program, and also the connectivity of the phone is...:
(even WITH the GPRS hack*always on*), I still lose connection(with 2-4 bars of signal) and therefore i get signed off of Agile, rather often. This isnt' such a problem with me, as seeing it takes a short time to log back in. However, when you look at the conversation from another person's point of view...all you see is
"Soandso" Logged off
"Soandso" logged on
etc
etc
(not sure if that last part was a question or a statement, but if theres an answer, i'd like to hear it!)
4.
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
5. After I went about and downloaded the Eten dial pad skin, I noticed that all of my contacts were unable to receive contact photos. I quickly realized that any contact that was saved on my SIM card from my previous phone was stuck in this predictament. However, if i were to create a new contact account, it quickly allows me to customize them alot further. Therefore, i was curious if there was any way to transfer my contacts on my sim card>my phone in a fashion that the phone will accept them.
I'm sure i'll think of more questions(these are just the ones that I havent been able to answer after days of searching :-D)
Thank you so much in advance!!!!!!!!!!!!!!!!!!!

Hi,
the speed of the HTC Wizard is very slow. That was my problem too.
for question no. 2:
Moving the apps to the card will result in more free space on the phone, OK, but running the apps from the card will also result in low speed, because the card is slower than the main memory. So I think you won't get more speed by this.
Try to overclock the device with OmapClock. My device works like a charm with 264 MHz (original was 180 MHz).
Use a tool like FreeUp RAM, which is part of the SK-Tools-package.
Running OmapClock and freeing up the RAM from time to time brings significantly much more speed. There is almost no waiting time if you click on an icon. You can even run Skype with OmapClock (many other users do so).
HTH

I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?

The Wizard isn't slow. Install a Qtek rom without branding, and it will be much faster.

even the sales associate at tmobile seemed to think it was slow. Upgrading to a different ROM sounds ok, but i'm trying to keep everything via tmobile. thaks for the tip though.

Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.

TazMan1688 said:
I have seen tidbits about overclocking through my endless searches the last few days. I've always heard that you have to be careful if you overclock a device, such as a phone. Has anyone had any known issues with the overclocking? Are there risks in having the phone run at that speed all the time?
Click to expand...
Click to collapse
There have been long discussion about what is safe with the Wizard on this forum.
See, for example, http://forum.xda-developers.com/viewtopic.php?t=40284
Also, the SmartsKey app automates startup of OMapClock.
http://forum.xda-developers.com/viewtopic.php?t=41060
(It has a number of other uses as well.
Hope this helps.

TazMan1688 said:
My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
There is a known problem with backlighting. See http://zendrui.free.fr/PZPForum/viewtopic.php?t=197
Also, check to see what events PZP is handling for profile-switching. For example, if you have calendar-based or time-based rules, they may switch your profile without you doing anything. Go to Settings, Control to see what you Switches you allow. Or check Time and Calendar for your profiles under the Configuration option.

As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat. Seems overly risky to make such an expensive device, run at higher speeds than its DESIGNED to do. But i'm still not sure, it almost DOES seem worth it...decisions, decisions...
Yes, Thank you for clarifying that...I mostly meant, the inconsistency of PZP with the timing of profiles. It seems as if the program will "switch" to the correct profile, but i don't always see a change in the operation of the device itself. Ex: I have it set to go to school mode at 7:30am, this past week(since its spring break, i've noticed that my incoming calls all had the normal ring volume, as well as system tones, etc...
Although it "says" ""School"" i don't really know if its truely in that mode?!
On this note, i have a question about setting the times(which is what i really want to accomplish). My phone goes to LOUD around 5:30am, School at 7:30 am, Normal at 1:55pm, and Quiet at 4pm.
Nooow, do i have to put two times in the school profile such as 7:30 am-1:54(5)???? so that it has an entire time interval...or can i just tell it when to start, and the next profile will automatically kick in and stop the previous.
Also, does putting the phone in standby or shutting it down have any effect on the profile??
I'm sorry in advance if i'm asking very basic questions, i've just been searching for a long period of time, and i usually can't find a specific answer to my question. So I decided I would spend the time to actually discuss MY problem, with hope someone can help. Again, sorry for any inconvienence or redudant questions.

TazMan1688 said:
As much as i'm sure overclocking the device may help, especially in my case. I'm just not sure if its worth the risk. Kind of hard to explain to Tmobile why the phone decided to overheat.
Click to expand...
Click to collapse
I have a german T-Mobile MDA Vario (= HTC Wizard) and I'm overclocking it permanently with OmapClock and SmartSKey. There is no overheating as far as I can say/feel. I can speed up to 264 MHz (original = 180 MHz). If I try more, the device softresets itself without any damage or loss of data. It's a kind of security mechanism. Of course, battery life is a little bit shorter when overclocking it. But I'm sure, slightly overclocking doesn't damage the device! Maybe the lifetime of the device will be a bit shorter, lets say 6 months in 5 years, but you won't realize that, because you won't be using your device in 5 years. You will sure own some other phone when the CPU dies. Together with the tool "FreeUp RAM" (comes with SKTools), I can reach a comfortable speed for everyday use. But never forget: The Wizard IS quite slow, compared with other devices. You can find smart workarounds for that, but don't close your eyes on that fact.
For running any GPS navigation tools I would consider buying not a Wizard, but a much faster device, if you would ask me. I'm using my Wizard only for addresses (~ 700 items), calendar (~ 1200 items) etc., and without overclocking and using a program like Pocket Informant 2005, that would be an annoying, maybe impossible thing. At the beginning, I had to wait almost 10-15 seconds until e.g. the month overview was created. Switch to the following month - wait again. Choose a specific day - wait again. Oh my god! That needed more patience than I had.

Are you running a basic install without all the phone networks customisation bloat?
you can do this by hard resetting (you will loose data doing this) and then doing a softreset when the customisation dialogue pops up after setting time zone etc.
this will speed things up over an install with tmobiles bloatware. I run tomtom and my device is in general as reponsive as the magician it replaces.
good luck with your phone
R

So guys based on your opinions and experience is it worth for me to get the MDA or should I go with a different carrier and a XV/PPC-6700 ?

Hi yozh,
I don't know the 6700-device at all. Maybe we don't have it here in good old Germany, or maybe under a differnt name. Does it have a bigger display (better for navigation)? Does it have a faster CPU? Then take that one! In my eyes I would never like to use the Wizard for navigation. It's only a better phone, not more, not less. For all other purposes I would buy a bigger machine. I do not want to talk bad about my own device, I have bought it and I use it and it's OK for the everyday things I do with it. It has nothing to do with "I'm proud of my device", like some people seem to be here. It's a phone, man, not a Ferrari or a Rolex. You would tell yourself lies, if you would call the Wizard a powerful device. I had a Palm Tungsten T5 before, and THIS is a powerful device. 2600 items in the calendar (true!), and the reaction time was half a second if you tap on the screen! You can go and have a coffee if you do that on a Wizard.
Just think about it. If you buy a Wizard, try it for a day and then write to me what you think about that phone.
Mh. My english should be better, I know.
Just my 2 Cents!

Hi well the 6700 is the apache I belive and the CPU is 416mhz but its not a "dual core" everything else screen adn such is pretty much the same. Thanks for the reply

SO any one on this forums can recoment apache over MDA ?

yozh said:
Hi,
Im looking to get the Tmobile USA MDA, but after reading posts like this Im alittle afraid.
I need to run TOMTOM on this device and thinking that this might bring the device to a halt. Now Im starting to think that maybe I should get the 6700. Please let me know what you found out about making MDA faster. Thank you.
Click to expand...
Click to collapse
See my posts on http://forum.xda-developers.com/viewtopic.php?t=48448 regarding processor speeds and TomTom.

Wow really TOMTOM runs better on the MDA then on a 400mhz DELL ? Then Im set defenatly getting the MDA, I like GSM network provide3rs better anyway and plus there are so much choices with the phones. I wish I was able to aford the JASJAS that looks really good.

Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Check out your running processes and close all the ones that are not needed or load an app that really closed things.

TazMan1688 said:
1. The MDA came with the default Tmobile theme which works fine in portrait & in landscape, as well as the default blue Windows theme.
However, I have tried to install multiple themes(including some from microsoft themeselves) and i have one annoying error! Whenever I use an "installed" theme, the portrait screen looks fine, but when I open the keyboard...there are two large greyish/white gaps on the side of the theme.
Click to expand...
Click to collapse
Themes built for portrait screens look wrong in landscape view. Easy solution: build a theme that works in landscape view. The Guava Bubbles theme works fine in both because the background image is larger than portrait size.
TazMan1688 said:
4. My girlfriend has a sidekick, and I LOVE the feature of being able to set phone profiles for specific times of the day. Especially during school, it'll go silent, and the second we are out, its back on normal. I have downloaded PZP to try and fix this loss of luxury. However, I personally don't find the program to be very consistent. Sometimes, it seems as if say my "school" profile is fully functioning, while other times, it really doesnt. Call me crazy, but I have taken a shot in the dark and ventured to say that if one touches the volume button on the phone while the phone is on a specific profile...it will throw it out of its cycle. If anyone has some hints/comments/suggestions of their own on this program or other favorites...I would love to hear from you.
Click to expand...
Click to collapse
I use PPC-Profiles-Pro, but you can't slave this to a time. Besides, I'd rather just put it on Silent mode by holding the connection manager button for three seconds (top left side button). Otherwise I use PPC Profiles to switch from Work (BT) to Home (Wifi, no BT) to Sleep (No Wifi, no BT, no email alerts or reminders, just ringer). Walking into a theater, I just go to silent mode.

bilbo_28 said:
Also don't forget that when you 'close' an appliation it does not really close, it just goes in to background, thus slowing the system down.
Click to expand...
Click to collapse
I know. I'm using MagicButton. And OmapClock with SmartSKey. And FreeUp RAM. In deed, I do almost EVERYTHING to make my device run faster.

No working sound and more....

It has been a long time ago that I bought a new toy with so many problems as this little b**&^^rd.
Now, already three times, I did not have any sound at all.
I do not remeber what complains there were (No driver installed? No sound card?) And I do not feel the energy to find out.
After a restart (which is always quickly done in maximum 4 minutes and I am becoming quite good in finding other things to do when waiting for this and that) the sound is back.
Till now my disappointment only consists of:
1. This sound problem
2. Resume problems in low power settings
3 SD card not being recognized, randomly
4. Shift control centre sometimes crashing, or not working at all.
5. Origami crashing, or not working, or only partionally.
6. Bad performance of my VLC player
7. And whatever anybody can find on this forum.
Anyway.. I am trying to transfer info from my MacBook into my new Macbook Air and that also hangs all the time, resetting the connection etc etc.
So it's not only Vista that makes me alcoholic
I think I grab a large bottle of.....
Huib

herpi said:
It has been a long time ago that I bought a new toy with so many problems as this little b**&^^rd.
Now, already three times, I did not have any sound at all.
I do not remeber what complains there were (No driver installed? No sound card?) And I do not feel the energy to find out.
After a restart (which is always quickly done in maximum 4 minutes and I am becoming quite good in finding other things to do when waiting for this and that) the sound is back.
Till now my disappointment only consists of:
1. This sound problem
2. Resume problems in low power settings
3 SD card not being recognized, randomly
4. Shift control centre sometimes crashing, or not working at all.
5. Origami crashing, or not working, or only partionally.
6. Bad performance of my VLC player
7. And whatever anybody can find on this forum.
Anyway.. I am trying to transfer info from my MacBook into my new Macbook Air and that also hangs all the time, resetting the connection etc etc.
So it's not only Vista that makes me alcoholic
I think I grab a large bottle of.....
Huib
Click to expand...
Click to collapse
Sounds familiar (forgive the pun). Not had your problems but I'm reaching the end of a bottle of wine that I opened 45 minutes ago whileunistalling SP1 which caused me endless troubles. Did you install SP1?

trend micro the culprit
If you did the vista sp1 upgrade you must uninstall trend micro antivirus from your system. It is not compatible with sp1 and breaks all of the items you mentioned.
I had the same problem - uninstalled and rebooted, all fixed.

jsp1 said:
If you did the vista sp1 upgrade you must uninstall trend micro antivirus from your system. It is not compatible with sp1 and breaks all of the items you mentioned.
I had the same problem - uninstalled and rebooted, all fixed.
Click to expand...
Click to collapse
I did not install Trend, neither do I have any other antivirus program.
But thx anyway for the hint.
Huib

herpi said:
It has been a long time ago that I bought a new toy with so many problems as this little b**&^^rd.
Now, already three times, I did not have any sound at all.
I do not remeber what complains there were (No driver installed? No sound card?) And I do not feel the energy to find out.
After a restart (which is always quickly done in maximum 4 minutes and I am becoming quite good in finding other things to do when waiting for this and that) the sound is back.
Till now my disappointment only consists of:
1. This sound problem
2. Resume problems in low power settings
3 SD card not being recognized, randomly
4. Shift control centre sometimes crashing, or not working at all.
5. Origami crashing, or not working, or only partionally.
6. Bad performance of my VLC player
7. And whatever anybody can find on this forum.
Anyway.. I am trying to transfer info from my MacBook into my new Macbook Air and that also hangs all the time, resetting the connection etc etc.
So it's not only Vista that makes me alcoholic
I think I grab a large bottle of.....
Huib
Click to expand...
Click to collapse
1. Sound is not working if you have problems with WM. Is WM working OK?
2. Same here
3. Same here
4. When is this? After you use a button?
5. Which powerplan do you use?
6. You must use the Performance power plan to get it working OK

display quirk?
Display quirk?
I recognized that the brightness of the start screen of Snapvue is irregular. Shouldn't it be pitch black? But across the screen I have got sort of a big grayish egg. Or: a big oval part is much lighter than the rest of the start screen in Snapvue. If I go into a menu which is basically white then the irregularity disappears.
Is this a common thing? Or is it just a quirk of my Shift?
Can I change the start screen having liberated the Shift (first steps), not changing to Realvga, I don't know if I have the courage to do that.
Thanks!
S

michael85 said:
1. Sound is not working if you have problems with WM. Is WM working OK?
2. Same here
3. Same here
4. When is this? After you use a button?
5. Which powerplan do you use?
6. You must use the Performance power plan to get it working OK
Click to expand...
Click to collapse
1: I am not using WM. But as far as I can see Snapvue working OK. No SIM card however. The sound not working occurs absolutely randomly, but I suspect a little bit the interaction between Origami and WMP. Could be the powerplan, but still....
2. I know, that's solved ( more or less but no more use of low power possible = shorter battery life).
3. I do not know what you mean, and what the realtion is between Vista and WM, I thought the SD card is not recognized by WM at all. I am talking about the SD card randomly dissappering when in Vista. Sometimes after suspend. etc. See that thread.
4. I cannot force this problem with Shift control centre. So no idea when.
5. Different powerplans. I combine them. I will do new research wit Origami only using the fastes power plan. ( If I have time)
6. I tried everything with VLC. It is not a huge problem and also randomly. But in full screen it plays irregularely. I know VLC is not the fastest of all, but still.
I suspect it is Vista doing all kind of things ( Indexing I shut of from the first day) randomly, preventing VLC to play correctly.
When I let it rest for a long time VLC performs better.
VLC working flawlessly or not, is not related to any powerplan or battery use. Tested all combinations. So, when it is working nice, I pull the power supply; put it on low power, and it keeps working nice.
It is all quite disappointing, and I am not an easy complainer.
Huib

Had the same problems with the VLC. I updated the video driver and it helped a significant amount. From unwatchable in full screen mode to at the least bearable.

carsany said:
Had the same problems with the VLC. I updated the video driver and it helped a significant amount. From unwatchable in full screen mode to at the least bearable.
Click to expand...
Click to collapse
Could you do me a favour and tell me in steps how I can upgrade the video driver?
I am not quite good in those things.
Huib

carsany said:
Had the same problems with the VLC. I updated the video driver and it helped a significant amount. From unwatchable in full screen mode to at the least bearable.
Click to expand...
Click to collapse
Strange... I do not see any difference after updating.
But my VLC is doing reasonably well, only in full screen it sometimes gets hickups.
Which version do you use? I have 0.8.6.e, and I understood there is already an f.
Huib

no sound
hey The sound bug is easily fixed, just open the device manager on the vista side of course, go to sound and on the plugin window it will say that it works but it didnt in my case, all I did was disable it wait a couple of minutes and then enable it again... hope it works for you

herpi said:
It has been a long time ago that I bought a new toy with so many problems as this little b**&^^rd.
Now, already three times, I did not have any sound at all.
I do not remeber what complains there were (No driver installed? No sound card?) And I do not feel the energy to find out.
After a restart (which is always quickly done in maximum 4 minutes and I am becoming quite good in finding other things to do when waiting for this and that) the sound is back.
Till now my disappointment only consists of:
1. This sound problem
2. Resume problems in low power settings
3 SD card not being recognized, randomly
4. Shift control centre sometimes crashing, or not working at all.
5. Origami crashing, or not working, or only partionally.
6. Bad performance of my VLC player
7. And whatever anybody can find on this forum.
Anyway.. I am trying to transfer info from my MacBook into my new Macbook Air and that also hangs all the time, resetting the connection etc etc.
So it's not only Vista that makes me alcoholic
I think I grab a large bottle of.....
Huib
Click to expand...
Click to collapse
try a different power outlet or a protective powerconnector, sounds like wrong voltage to me, also the mac issue

sebastiaanmeloen said:
try a different power outlet or a protective powerconnector, sounds like wrong voltage to me, also the mac issue
Click to expand...
Click to collapse
Weel,
is is already a long time ago.
My Shift is over and out. It never worked properly.
But hte Mac?
I have a Macbook air with 128 GB SSD.
Works like a charm.
Windows is over and out for a long time already.
Huib

herpi said:
Weel,
is is already a long time ago.
My Shift is over and out. It never worked properly.
But hte Mac?
I have a Macbook air with 128 GB SSD.
Works like a charm.
Windows is over and out for a long time already.
Huib
Click to expand...
Click to collapse
ur always welcome to send me your old shift

sebastiaanmeloen said:
ur always welcome to send me your old shift
Click to expand...
Click to collapse
I gave it to the kids in my old, small, village, here in Romania.
They use it for skype and internet browsing. ( a 1400 euro tool)
Sorry......
Huib

Seriously preformance issues

Hi.
I have to soft reset my HD2 all the time because it often lags too much.
I will now list the things which makes me wanna reset my device:
- The HD2 lags so badly, that most actions take up to 5 seconds.
- One application can crash (mostly HTC_Messaging), and I have to soft reset.
- When I write messages, the keyboard has a input lag of 5-10 seconds.
- Screen wont turn on when I push the buttons
- The device wont unlock when I slide the slider, it just stops up.
Now this happens each time I upgrade my ROM, and I am currently using Artemis now.
The programs I've installed each time is:
- FingerKeyboard
- Touch X reset and wifi
- Touch X button icon in messaging
and now I use WMLongLife also.
My SD-card is an 8GB card.
So if someone could help me, I would be happy.
(Sorry for bad english.)

try installing the cleanRAM app

djchubbs said:
try installing the cleanRAM app
Click to expand...
Click to collapse
Doens't help either, ends up with the program crashing when its at the end and I try to klikk "OK!"

have you try to reinstall factory setting or hard reset

henninghh990 said:
Doens't help either, ends up with the program crashing when its at the end and I try to klikk "OK!"
Click to expand...
Click to collapse
Start again. Install nothing and just configure settings.
Does it run slow and crash then?
If so you have problem that could be harware.
Try another ROM and if the same then I think you need to return the unit.
If all runs fine on a clean, vanilla phone then you are doing something in the install process that is causing the instability.
Try installs one by one to the phone mem and check operation each time.
NB. Some background info would have been helpful. ROM version, Model etc!

pa49 said:
Start again. Install nothing and just configure settings.
Does it run slow and crash then?
If so you have problem that could be harware.
Try another ROM and if the same then I think you need to return the unit.
If all runs fine on a clean, vanilla phone then you are doing something in the install process that is causing the instability.
Try installs one by one to the phone mem and check operation each time.
NB. Some background info would have been helpful. ROM version, Model etc!
Click to expand...
Click to collapse
The problem is that I can't predict when its gonna happen. It can happen randomly, and then I have to restart the phone. After the restart, everything works normal and perfect.
This can happen upto three times a day, some days it wont happen at all.
Currently using 2.10.531.7 Artemis, but this also happens with the stock ROM. The newest one that is. My radio version is 2.06.51.07
Its kinda difficult to run things vanilla phone, cause the applications I use, I need.

for me htc messaging has never crashed...
i suggest you to flash a stock rom, 1.66 for example and try it without the sent button.
if there are still problems, u can try using mtty or send it back for repair...
edit: i had the problem where the phone was freezing while loading for a long time (over night), and the display won´t turn on. Switched back to manually update Facebook, Twitter and Weather, and had no more problems since...

Bimme said:
for me htc messaging has never crashed...
i suggest you to flash a stock rom, 1.66 for example and try it without the sent button.
if there are still problems, u can try using mtty or send it back for repair...
edit: i had the problem where the phone was freezing while loading for a long time (over night), and the display won´t turn on. Switched back to manually update Facebook, Twitter and Weather, and had no more problems since...
Click to expand...
Click to collapse
Well I think its crashing.
That's what I usually use when I lock the screen. So sometimes when I try to unlock it, I just get half of the messaging program or nothing, on screen. And I cant do anything.
When I try to click the Home-button, it respons in some seconds and Home-screen is all laggy.

henninghh990 said:
Well I think its crashing.
That's what I usually use when I lock the screen. So sometimes when I try to unlock it, I just get half of the messaging program or nothing, on screen. And I cant do anything.
When I try to click the Home-button, it respons in some seconds and Home-screen is all laggy.
Click to expand...
Click to collapse
When you lock the phone apps still run in the back ground as if asleep and when you unlock they attempt to restore themselves as they were before the lock.
You have something clashing installed and that is calling the registry at the same time as something else. Remember when windows full size used to do it?.
I think you have a badly written piece of software installed (either preloaded or installed by yourself) and suggesting starting from vanilla is a way to issolate it!

i've also had similar problems as you. after hard reseting a couple of times, i noticed that the intermittent lag began after i started syncing my phone to my PC and myphone. it turns out that my terrible management of appointments, messages and contacts was the root of my problem (several duplicates of everything, and almost 5000 text messages). i suggest you attempt to work your phone a couple days without loading up any PIM information, archive messages and remove duplicates (sktools is excellent at doing this)
i suggest you do something similar, it really helps. i was able to get my device to prrform as well as when i still had the vanilla ROM
best of luck! your device is better than you think!

Also, use the Task Manager, and close applications that you don't use, especially the Internet browser and applications that use data connection. These ones can really block the phone when connection is intermittent.

Yet again, I'm left dumbfounded by claims of "serious" issues with this device. I just don't understand how almost everyone has a "story" regarding the HTC HD2 being SLOW or LAGGY. Fortunately for me, I haven't soft reset my unit in 46h 5m 19s and everything is still running flawlessly.

your phone sounds faulty or something. for me.. even with the Stock 1.66 ROM i had, it was working pretty fast n smooth. now with Dutty's ROM, its faster n smoother than ever. i love this beast

I never have these problem! I used Official or Clean EX HQ roms and never got these problem!
Try a Task 29 and flash with 1.66 Official or Most popular Cook ROM

Pa49: I have only installed the programs which I have listed in the first post. I guess im not the only one using them.
Kev007: I usually have a lot of textmessages when I dont delet them, but thats max 2000. I dont sync my phone with my computer, so no uneccessary contacts or something either. Dont even use calendar, so have no appointments.
Reignzone: It is really bad. It can happen upto three times a day, and I just cant use the phone at all. Just sliding the home-screen to see all my shortcuts takes maybe 10 seconds. I could film it with a camcorder next time it happens so people could see.
The same thing happens each time I've installed a ROM. So it has clearly something to do with the phone and not with the software I've installed.

Pa49: I have only installed the programs which I have listed in the first post. I guess im not the only one using them.
Kev007: I usually have a lot of textmessages when I dont delet them, but thats max 2000. I dont sync my phone with my computer, so no uneccessary contacts or something either. Dont even use calendar, so have no appointments.
Reignzone: It is really bad. It can happen upto three times a day, and I just cant use the phone at all. Just sliding the home-screen to see all my shortcuts takes maybe 10 seconds. I could film it with a camcorder next time it happens so people could see.
The same thing happens each time I've installed a ROM. So it has clearly something to do with the phone and not with the software I've installed.

I get lags too when twitter is updating in the background. You would think a 1ghz processor could do two things at once

Backup your miscrosd. Try a microsd format. Restore your data. See if this helps.

T-Mo US HD2, still completely stock. I was having some issues with sluggish animations, applied many of the tweaks in the sticky threads here, things got better. However, it was super super slow to switch into some applications (SMS *always*, others occasionally).
Eventually I wondered about that fancy Swype keyboard and tried switching back to the full qwerty. All that disappeared and it moves like lightning now, I have to say.
I haven't played with updating Swype or maybe at least loading a ROM without it that I can do a regular install on top of. However, right now I don't miss it .

Lag issues
I have no idea what is causing your issues, but if it travels from one rom to the next, it may be your sd card.
I had an issue with lag in swype and other apps.
I noticed when I popped out the sd card the device instantly unfroze.
I then copied all files except App data and reformatted the sd.
No issues after that.
Hope this helps.

TouchFLO 3D home screen freezes

Sometimes I just hate my phone. I have an AT&T HTC Pure. I haven't done any modifications to the ROM or anything, just installing a few apps. Today my phone turned itself off due to low battery, so I put it on the charger for a couple hours. When I needed it again I turned it on and the HTC TouchFLO 3D loaded, showing my background and the big ugly clock along with my appointments. I noticed after a few minutes the time was off by... a few minutes. The screen had completely frozen. I couldn't use the slider at all. There goes my People, Music, Calendar, Weather, and Programs tabs I use all the time. I soft reset and it comes back, looking normal. I go to use the slider and it freezes in mid-motion... never to move again. I press the Start button and my Start menu comes up. I close the Start menu and I can still see it, although it doesn't respond and the X is gone from the upper right-hand corner. I tap the Notifications bar and my notifications show up. I click close and it's still up, just not responding to taps (frozen is my guess). I've reset it a multitude of ways now all with the same result... even taking out the battery.
I don't get this. It was working fine just a short while ago. I've reset the thing before and not had this problem. I haven't installed any apps since the last time I had to turn it off due to low battery, and it came up fine from that. What could be causing this?
The real thing is this has happened before. It's like if it ever has to reload the TouchFLO interface it just bombs 1 out of 20 times. Hell I was playing around with Android for the thing, which resets the phone when you want to go back into Windows, and not had this problem the whole time I was testing it. If my phone shuts down, roll the dice and I might get lucky enough for it to come back without this problem.
I resolved it before by doing a hard reset. Lost all my stuff. That sucks for what seems no good reason at all. It's not like I was modifying system files or screwing with registry settings. It isn't even a custom ROM.
Any insight on what could be causing this, and how to get it back to normal?
I'm regretting not buying an Android phone every day anyway, but thanks to 2yr service agreements and lack of sufficient disposable income to dump AT&T I'm stuck with this thing for a while.
Thanks in advance for any help and understanding!

Your issue is that you are on the stock ROM.
That's why XDA exists, because stock ROMs are full of bloatware, eating up memory, and lacking any performance tweaks.
Cooked ROMs are not a cause of issues but a solution.
I hated my phone out of the box, but now it rocks...
With that, if you are going to stay stock, I suggest you get a backup program and hard reset.

At this point I'm very interested in custom ROMs, yet I know little about them. Looks like its time to get on it and read up what I can.

reptiletim said:
At this point I'm very interested in custom ROMs, yet I know little about them. Looks like its time to get on it and read up what I can.
Click to expand...
Click to collapse
Start with the Hard SPL thread. A link is located in the 2nd sticky.
This is the precursor to flashing a custom ROM.
Once successful, you can cruise the ROM forum for the ROM of your liking.

It's things like this that make me so glad I found this site

You can try installing "CleanRAM" and running it after every initial boot to clear excess memory. You can also configure CleanRAM to schedule your memory cleaning. I recommend you to use "Level 2" cleaning though.

cyberdroxxx said:
You can try installing "CleanRAM" and running it after every initial boot to clear excess memory. You can also configure CleanRAM to schedule your memory cleaning. I recommend you to use "Level 2" cleaning though.
Click to expand...
Click to collapse
Unfortunately CleanRAM does absolutely nothing. When TouchFLO 3D re-loads it lasts almost literally 2 seconds before freezing at whatever I'm doing. I've even used the customized process cleaner to stop as many processes as I could (or just manila.exe) and it still will freeze when the interface comes up.
I've been able to get it to the standard Windows Default look and it works now, so that will enable me to back up what I'm going to. If I'm going to have to do a hard reset anyway, might as well put something better on there.

Maybe this might help
i experianced the same problem and the cause was i sync my entire e-mail acc. on the pure and it ran ok untill i restarted it and it boom hanged.
So i cleaned up the entire messaging folder under \Windows\
At restarted it and it was fine
So i suggest dont sync up entire e-mail in any form i.e headers only etc.
If this helps do P.M me

I installed a custom rom from dutty, and now it completely dies while in standby, have to remove the battery to boot it up again. Looks like I traded one critical problem for another.

reptiletim said:
I installed a custom rom from dutty, and now it completely dies while in standby, have to remove the battery to boot it up again. Looks like I traded one critical problem for another.
Click to expand...
Click to collapse
Did you hard reset after flashing?
Also, which version of Dutty's did you install?

GT-i9000m has been locking up recently to the point of removing the battery.

It went from extremely rarely doing it to three or four times just the other night in the span of a few hours. I can't reproduce it on command but it happens when I lock the screen and put it in my pocket. Then sometimes when I take it out it is entirely non-responsive, even the power button doesn't work. I have to remove and reinsert the battery.
It could be ADW Launcher or WidgetLocker since those are the only two programs always running, but I was hoping someone else experiences a similar issue. It hasn't happened when I normally lock it yet though, so it could also be the proximity sensor maybe?

Having the same issue (on Bell as well), but not running either of those two apps. Was almost to the point of returning the phone and then installed JM7 and it's been better, although not perfect. Last night it locked up with NoLED displaying an icon, so I've deleted that app to see if that's the issue. It hasn't locked up today, but it did reboot a few hours ago seemingly at random. :shrug:

Your internal sd card might be failing like all the other i9000m phones I see on this forum bricking themselves .

clubtech said:
Your internal sd card might be failing like all the other i9000m phones I see on this forum bricking themselves .
Click to expand...
Click to collapse
Oh, that doesn't sound pleasant at all...
I'm outside of Bell's 30 day exchange period plus I've talked for over 30 minutes, so I'll have to go through Samsung if it completely breaks. On the plus side, a phone from them should be three button recoverable.
Although I can't be without a phone for weeks, I hope it's not the SD card.

Mine Lags like crazy once every few days till the point I need to restart it. Any idea why this is do?
Sent from my GT-I9000 using XDA App

Hold your horses people....
before you jump about the lag, and or one click lag fix and such
first you have to investigate what is running on your phone.
just over the weekend (since XDA was down) i stalled over 400 Apps
my phone slowed down to snail speed, then i ran my Startup Manager software (many to choose from)
I suggest Startup Cleaner 2.0 then uncheck everything, leave only the apps that you want to run during start up
reboot your phone and presto, fast as new!
if you can find version 2.1 of startup manager that one is even better
keep note, start up manager apps are not the same as task killer apps
it only run once during start up, and it helps you easily select what should and should not run during start up, so it doesn't stay in memory after it runs
on the same topic
you should also configure your Task Killer apps to kill everything, and add only the wants you want to be running to the ignore list.
that will keep the phone working smoothly even without the "one click lag fix"
i'm still running stock on my JH2 i9000m

AllGamer said:
Hold your horses people....
before you jump about the lag, and or one click lag fix and such
first you have to investigate what is running on your phone.
just over the weekend (since XDA was down) i stalled over 400 Apps
my phone slowed down to snail speed, then i ran my Startup Manager software (many to choose from)
I suggest Startup Cleaner 2.0 then uncheck everything, leave only the apps that you want to run during start up
reboot your phone and presto, fast as new!
if you can find version 2.1 of startup manager that one is even better
keep note, start up manager apps are not the same as task killer apps
it only run once during start up, and it helps you easily select what should and should not run during start up, so it doesn't stay in memory after it runs
on the same topic
you should also configure your Task Killer apps to kill everything, and add only the wants you want to be running to the ignore list.
that will keep the phone working smoothly even without the "one click lag fix"
i'm still running stock on my JH2 i9000m
Click to expand...
Click to collapse
All gamer has a good sugestion here BUT we are going to get people flaming the fact that Android shouldnt need task managers.....
Ho hum..
TBH in my experience, I have found (after a couple of hard resets) that there appears to be a size limit for installed apps. Once I get over this size limit, I get LAGTASTIC, phone slows to a snails pace, then I remove a few of the apps and I am back at light speed again....
I cant say what the limit is, but I know when I have hit it - I would then uninstall a lame app or two and get back running.

Yes a lot of people "claims" that, but yet you do a search in Android Market, you see LOTS of Task Manager / Killer apps for every phone.
they were not designed for Galaxy S, they were designed long ago for all the other phones that had and still have the same problems of memory management causing lags
Android is not robust enough to survive without one
heck not even Windows 7 or Windows Mobiles phone

I just read that possibly the phone freezes while trying to find a signal. As this problem has only recently started, and I just recently moved into university, and many buildings receive little to no wireless signal, I think it's more than a coincidence. I'll try going to plane mode before entering lecture halls and basements.

Frostshock said:
I just read that possibly the phone freezes while trying to find a signal. As this problem has only recently started, and I just recently moved into university, and many buildings receive little to no wireless signal, I think it's more than a coincidence. I'll try going to plane mode before entering lecture halls and basements.
Click to expand...
Click to collapse
i don't think that is the case with the Galaxy S
however back then my Treo 650 did suffer from that.
if you believe that is the problem then try this
http://forum.xda-developers.com/showpost.php?p=7999389&postcount=28
more cool apps here http://forum.xda-developers.com/showthread.php?p=7999389