Hi,
Does anybody know how to determine programatically how many bytes have been sent over a GPRS connection?
It must be possible, as there are commercial software applications which monitor such information, but the basic API functions I can find on the Microsoft site, such as ConnectionManager, don't seem to do the job.
Many thanks for any help,
John.
P.S. I'm using an Orange M2000 (Blue Angel) Windows Mobile 2003 Phone Edition.
Hi, I'm using tapi on a iMate 2003 jam phone and I've run into several features not being supported by that tsp, such as voice mail, wav files over the line, radio signal, etc.. . I'm trying to find a good phone with a good tsp to go forward with my development and was hoping a developer here would have thoughts on which phones had the best tsp. I don't care if it's mobile 2003 or 2005.
Does anyone know of a way to find this information out without having to buy a phone and try it?
Thanks for any help
Can anyone tell me how i can make my MDA Vario II think it is a TyTn? Its unlocked & debranded with WM5. Im useing it on the 3 network but it will not recognise as a TyTn so i can not download videos or pictures from Planet 3. Also i have Windows Live but it will not conect, please help me someone & solve all my problems!
Why would you want it to act as a TyTN??
Both the Vario II and the TyTN are HERMES devices. Your device should work with the same stuff as a TyTN and vice versa?!
Have you got the correct GPRS and MMS settings??
You would think so, but i can not download anything from planet 3, pictures do not always load up & 3 mobile mail works with the TyTn but it will not recognise that i am useing one. My friend says there is a way to change the settings useing Resco Explorer but we do not know what the settings are.
Sorry its not Resco its PIEPlus V2.2 & yes the GPRS & MMS settings are correct.
how do i get Windows Mobile 6 to work with Three (3) sim ???
Windows live mesenger cen not connect !! (ment to be free untill end of 2007)
Email (built in outlook) dosent work !!!!!!!
internet explorer works butonly through three proxy and tacks more time to load then GPRS (im conected to HSDPA)
im using unlocked Windows Mobile 6 Treo 750
Silly question, but have you tried the network wizard? I could never get mms to work with 3 on wm5, but soon as I put wm6 on and ran the wizard it sorted everything out, no proxy either. Haven't tried live messenger though
LethalCorpse said:
Silly question, but have you tried the network wizard?
Click to expand...
Click to collapse
What network wizard ?
On my WM6 rom on o2 XDA exec it's under start/settings/connections/network wizard, but it may not have been included in your rom for the treo. If it's not on your phone, have a poke around here and on the web for it
NEW IMPROVED CABS : POST 3
A very Special Thanks to tucahara, Schap, Jaap de Wolf, Dridder
Note : For HTC devices only, please read 2nd post -below-for non HTC devices.
- 3G, WLan, GPRS Capable
- GPS Works
- Recent Drivers
- Updated Registry
- All Major Codec compatible[ a-law, u-law, GSM ask provider to enable ]
- Integrated with Phone and address Book
- VOIP and Carrier sellectable on today screen
- SIP Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- Dial Plan Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- NAT Enabled
- Echo Canceller
- For WM6.1 and WM6.5
- Tested and working on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K], Xperia X2
- No sound from earpiece ( Please install cab from previous thread but that is only for HTC devices )
INSTALL ON FRESH OS and PLEASE POST YOUR RESULTS GOOD OR BAD. Thanks
THERE IS NOTHING WRONG WITH THESE CABS, SO PLEASE DO NOT COMPLAIN ABOUT CABS. IF THESE CABS WONT WORK, PLEASE READ DIFFERENT POSTS IN XDA AND FIND OUT WHY. MOST COMMON REASON IS DEVICE OR OS NOT SUPPORTRD MEANING DEVICE DOESNT HAVE FILES NEEDED FOR THESE CABS TO WORK.
These cabs are tested, working with different providers-devices and are not for noobs, if you have come across this before, you will find out, these cabs are the best among them.
Outdated Cabs HERE
For non HTC devices, do the following
- Install one of the cabs post 3 matching your OS.
- Fill all required information in setup voip.
- When you try to save you will get a error
- Close it and Run your GPS program.
- Your GPS with get a lock in few minutes as normal.
- Once you find out your GPS program can see satellites, close it.
- Copy and paste dnsapi.dll into your windows folder
- Restart your device and you will have your gps and voip/sip working
- Make sure to fill information in setupvoip again
New improved cabs
New improved cabs with changed dll. Note : Only for HTC devices. For other non HTC devices, please refer post 2 along with these cabs for optimum results.
Reserved for future2
Reserved for future3
Reserved for future4
Calls hang up immediately after being answered
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
nickdo said:
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
Click to expand...
Click to collapse
Samsung WM6.5 drivers not compatible with dlls. Please look at outdated cabs link above and go to last page for omnia solution. It works fine on my omnia with Wm6.1. I have tried on WM6.5 on Omnia with same results as yours.
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
nickdo said:
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
Click to expand...
Click to collapse
you are right
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
That is not right. I have an Omnia 2 i8000 windows mobile 6.5 and I am able to use voip on my phone.It works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. AutoAudioRoute V2.0
4. Copy paste dll in windows folder.
My PDA is i8000NXXJJ1
jukefox said:
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
Click to expand...
Click to collapse
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
bbuhas said:
that is not right. I have an omnia 2 i8000 windows mobile 6.5 and i am able to use voip on my phone.it works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. Autoaudioroute v2.0
4. Copy paste dll in windows folder.
My pda is i8000nxxjj1
Click to expand...
Click to collapse
----------------------------------------------------------
this is not the integrated solution sir. Thanks for time.
----------------------------------------------------------
dhillonbros said:
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
Click to expand...
Click to collapse
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
jukefox said:
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
Click to expand...
Click to collapse
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
dhillonbros said:
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
Click to expand...
Click to collapse
My phone works great with other not integrated solutions like PortSIP or AGEphone Mobile, so my network is fine. And there should not be a problem with the codecs as well as PortSIP (I don't of the codecs AGEphone uses) uses G711U, G711A and GSM as well (I know of them because theses codecs are configurable over the GUI).
I use AVM FRITZ!Box 7390 as modem / router with its own SIP registrar. That means my Omnia II is configured to use my FRITZ!Box as a SIP server whereas my FIRTZ!Box is connected to my VoIP service provider (the popular German internet provider 1&1) and redirects the VoIP packets to them. It is totally transparent to the SIP client therefore no STUN / ALG (I never heard about ALG before) is used between the SIP client and my FRITZ!Box.
I am not willing to create an account at voipvoip.com because I definitely want to use the phone numbers I got from my ISP but I may provide you credentials for testing purposes to use a phone number from my ISP if you like.
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
jukefox said:
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
Click to expand...
Click to collapse
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
dhillonbros said:
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
Click to expand...
Click to collapse
Hello again,
I already bypassed my router by configuring my pbxes.org account, didn't I? Anyway I now switched my router with integrated telephony services support by an older FRITZ!Box 3130 without telephony services to exclude any conflicts with reserved ports or somewhat else. And you know it: Same result.
Last but not least I tried a connection over 3G by activating that option within the configuration. But I failed already with selecting the service. The search action did not succeed.
I'm running out of ideas. What now? Shall I setup an account for you? I really wanna see whether you are able to reproduce my problem or not.
Thanks a lot.