Message sent (SMS) not found in Sounds and Notifications - 8525, TyTN, MDA Vario II, JasJam General

I'm using a Japanese Hermes and for some reasons I can't find Message sent (SMS) notification when I go to Start - Settings - Sounds & Notifications - Notification Tab.
I know the registry tweak is somewhere in HKCU\ControlPanel\Notifications\ but I don't know which one because the Default key is missing as well. I need your help guys.

sharkbait_325 said:
I'm using a Japanese Hermes and for some reasons I can't find Message sent (SMS) notification when I go to Start - Settings - Sounds & Notifications - Notification Tab.
I know the registry tweak is somewhere in HKCU\ControlPanel\Notifications\ but I don't know which one because the Default key is missing as well. I need your help guys.
Click to expand...
Click to collapse
Ok, maybe my first post was difficult to understand. Here's what I'm trying to say.
This is the notification key for battery low warning:
HKCU\ControlPanel\Notifications\{A877D663-239C-47a7-9304-0D347F580408}
For new MMS message:
HKCU\ControlPanel\Notifications\{29C3570E-5483-4cb0-9B57-5CFED893AC45}
For sending MMS:
HKCU\ControlPanel\Notifications\{29C3570F-5483-4cb0-9B57-5CFED893AC45}
Please help me find the key for sending SMS. Thank you.

I finally found the solution.
SMS NOTIFICATION
Navigate to:
Registry Key: HKCU\Control Panel\Notifications\Default
Registry Value: Options
Registry Data: 0 to 11
Here are the description for the different registry data values:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
If keys Missing create them!

Related

Change repeat setting of Alarm/Reminder

The clock of WM stop ring after 1 or 2 ring... can I set it continue to ring until I stop it please?
Up,
Is there a hack in the registry to change the repeate of the reminder/alarm please? The alarm default of WM is too poor, it ring 1 or 2 times and stop (the distance between 2 ring is also very long), it's impossible to wake up with that.
I don't understand why, to this version WM6, crosoft do not fix this problem and let WM user look for always an alternative software solution
Ya I don't know why WM has such a crappy alarm interface.
I'm finiding the ringer to lack mp3 support and also repeating the alarm.
I know about 3rd party programs SPBtime/Chronos, but I'm afraid its going to kill battery for something that WM should already have been doing.
ChiGGz said:
Ya I don't know why WM has such a crappy alarm interface.
I'm finiding the ringer to lack mp3 support and also repeating the alarm.
I know about 3rd party programs SPBtime/Chronos, but I'm afraid its going to kill battery for something that WM should already have been doing.
Click to expand...
Click to collapse
Me too, spb kill my battery... Hop MS fixe it in next version WM
How to Enable Repeat Play Audio Sound Notifications in Windows Mobile
How to Enable Repeat Play Audio Sound Notifications in Windows Mobile
=====================================================
In Windows Mobile Pocket PC smartphone device, user can configure and set sounds and notifications alert for various events and activities that happening on the device. The notification alerts can be playing a custom selected sound, ring tone or tune, display message on screen, flash keypad light, or vibrate.
And user can customize their favorite alert music audio and notification method for events such as incoming new e-mail messages, MMS messages, SMS text messages, missed call and voice mail the phone received. However, the notification alert for each event happens just once for one time. Supposedly, it’s possible to set the notification such as beeping and playing audio sound recurringly and repetitively until user acknowledge the e-mail, MMS, SMS or other events.
There is an option of “Repeat” for “Playing sound” in “Sounds & Notifications” control panel of Windows Mobile. However, the “Repeat” check box is always grayed out and disabled for most events, except few events such as Reminder. So user cannot select “Repeat” option in order to make notification alert recurring and repeat.
There is registry hack that able to enable the “Repeat” check box in “Sounds & Notifications” control panel. To perform the change on Windows Mobile registry, a registry editor such as PHM Registry Editor, Mobile Registry Editor or CeRegEditor is required.
In Registry Editor, navigate to the following registry key branch:
HKEY_CURRENT_USER\ControlPanel\Notifications
There is a lot of registry sub-key inside the Notifications folder. Search through one by one to find and locate a registry entry that has its Default (REG_SZ) value as the name of the event. For example, Messaging: New e-mail message, Messaging: New text message, Messaging: New MMS message, Phone: Missed call and etc.
Once found the correct registry sub-key that represents the event that you want to enable the “Repeat” option, edit the value data for Options value name. Change the value to 1073741835 (in Decimal base) or 4000000B (in Hexadecimal HEX base format). Save and exit from registry editor.
Now the Repeat check box is enabled, and user should be able to set repetitive and recurring event notifications.
The alerts appear to completely stop at 10 minutes.
For example a text message comes in, you get an alert
You get an alert every 30 seconds for 3 minutes
You get one alert at 5 minutes
You get one final alert at 10 minutes
Tweak and Configure How Notifications Work in Windows Mobile Notifications
Tweak and Configure How Notifications Work in Windows Mobile Notifications
=========================================================
Windows Mobile powered device (including WM5, WM6 and WM6.1) has a registry key that allows user to tweak, control, configure and customize how notifications work in the mobile Pocket PC (PPC) device. For example, whether a notification should shows or hides the icon in taskbar, play notification sound, pop up notification bubble for user to dismiss or vibrate.
One notification that can be configured via the said registry key is SMS sent notification, other than the SMSNoSentMsg registry key. Then Options registry entry, under HKEY_CURRENT_USER\ControlPanel\Notifications\Default registry branch, when changed to reflect user own preference, may affect other notification in Windows Mobile device too, especially those unable to configure via Sounds and Notifications control panel GUI.
To perform the registry hack to configure different settings for notifications in Windows Mobile, run any registry editor on Windows Mobile device (such as PHM Registry Editor) or remotely access mobile device registry with CeRegEditor from desktop PC, and then navigate to the following registry key:
HKEY_CURRENT_USER\ControlPanel\Notifications\Default\Options
Then, change the DWORD value to any of the following value, which also shows its corresponding results on notification respond, depending on user’s preference:
• 0 - Show icon
• 1 - Show icon and play notification sound
• 2 - Show icon and vibration
• 3 - Show icon and vibration and play notification sound
• 4 - Same as 0
• 5 - Same as 1
• 6 - Same as 3
• 7 - Same as 3
• 8 - Show icon and notification bubble
• 9 - Show icon and play notification sound and show notification bubble
• 10 - Show icon and notification bubble and vibration
• 11 - Show icon and play notification sound and show notification bubble and vibration
• 13 - Same as 1
The change takes effect effectively.

Hot to turn off display-notifications for SMS and E-Mail?

Hello,
does anyone know how to turn off the display-notifications for SMS and E-Mail? Under settings I've already turnd off "Show Message" but when I get a mail, I get a notification "you've got x new unread mails"... so everytime I turn on my phone, I'ce to press "Show" and "Dismiss"... I hat it! ;-)
settings-sounds and notifications
notifications
pick the notifications in question
unlick the checkbox called
display message on screen
Rudegar said:
settings-sounds and notifications
notifications
pick the notifications in question
unlick the checkbox called
display message on screen
Click to expand...
Click to collapse
as wrote in my post, I've already done that... but that means only to not show the message directy, when it arives. I've already unlick that checkbox, but there is still an notification on the screen when i get a mail, which says "you have x unread messages"... from there you can "dismiss" or "show"...
Wow, i had that question in my mind, answer came before the question. Thanks rudegar.
HerrVorragend said:
Hello,
does anyone know how to turn off the display-notifications for SMS and E-Mail? Under settings I've already turnd off "Show Message" but when I get a mail, I get a notification "you've got x new unread mails"... so everytime I turn on my phone, I'ce to press "Show" and "Dismiss"... I hat it! ;-)
Click to expand...
Click to collapse
Call your service provider (AT&T, etc.) and tell them about the notification problem. Provide info...they can fix for you from their end. I had the notification problem when after listening to voicemail, the word and icon remained on my device.
hotdog53 said:
Call your service provider (AT&T, etc.) and tell them about the notification problem. Provide info...they can fix for you from their end. I had the notification problem when after listening to voicemail, the word and icon remained on my device.
Click to expand...
Click to collapse
I don't think, that my provider can help, because I use Direct Push, which communicates directly with our own Exchange-Server... my provider provides only the possibility to connect to the internet. It must be a hidden setting in WM-registry or something like that
HerrVorragend said:
I don't think, that my provider can help, because I use Direct Push, which communicates directly with our own Exchange-Server... my provider provides only the possibility to connect to the internet. It must be a hidden setting in WM-registry or something like that
Click to expand...
Click to collapse
OK, sorry 'bout that. I have direct push mail available, but don't use it because of what you're experiencing right now. I just go on the internet to check and read my mail. I'm not all that familiar with direct push; don't really know how it works.
For those still looking for the answer for this; the only way to turn this off when using Push mail is by setting the following registry value:
HKCU\ControlPanel\Notifications\{A877D65A-239C-47a7-9304-0D347F580408}
set value "Options" to 20000000 (hexadecimal) or 536870912 (decimal)
Note that this disables email notifications completely, so if you want just a sound or a vibe, you'll have to use some other tool (e.g. MortScript) to achieve that.
i found this on another site.It may help you..
1. Install a registry editor like Resco File Explorer’s add-on registry editor or PHM registry editor.
2. Open HKEY_CURRENT_USER
3. Tap control panel>notifications
4. Tap default
5. Tap options
6. Choose what value will be applicable to you and replace the default number with it (for XDA Atom, the number was 13, I replaced it with 8 to suit my preference):
0 show icon
1 show icon and play notification sound
2 show icon and vibration
3 show icon and vibration and play notification sound
4 same as 0
5 same as 1
6 same as 3
7 same as 3
8 show icon and notification bubble
9 show icon and play notification sound and show notification bubble
10 show icon and notification bubble and vibration
7. If you want to configure how long the notification bubble will stay on the screen, tap on duration instead of options. Change the number there into the number of seconds you want the notification bubble to stay up.
I've created a CAB that does the following changes, however SMS notification is still working (which is ok for me).
Code:
HKCU\ControlPanel\Notifications\{A877D65A-239C-47a7-9304-0D347F580408}
set value "Options" to 20000000 (hexadecimal) or 536870912 (decimal)
OK, guys, I managed to switch off the annoying visual notifications for missed calls and SMS by setting the 536870912 value for "Options". But there's a problem - I cannot get any sound notification for new SMS Is there anyway to get sound/vibration with all other visual notifications turned off? Please tell me "yes"
Has anyone found a solution in the meantime? I'm still searching for a way to disable the "visual notification" without loosing the new-email-sound.
JR...AWESOME JOB ! Thank you so so so so much for sharing this cab file....I am so happy I didn't have to go into the registry to make the change !!!!
So I kinda had the same question. I'm using s2u2 but I don't like the notification popping up when its activated. The whole screen turns black except for the notification bubble, which kinda defeats the purpose of using s2u2. I have disabled all but the downloaded mms notification cuz is greyed out on my device? Is this normal on everyones device? I don't wanna lose sounds, I just want the bubble gone
Would be great to have this, especially with S2U2 and PocketCM.. Is there still no way?

SMS Sent Notification

I've got an annoying problem that I can't seem to fix....there is no option in Notifications to change how sent sms notifications arrive - so it vibrates and chimes every time. I need to keep the notifications themselves on, just without the audible notification!
Also, there is an option to set this for MMS messages which seems odd...
Any help would be appreciated. Cheers.
Dude- Im sure you have checked the settings in START>Settings>Sounds&Notifications right
Yeah. There is no option to change the notification for sms delivery reports though.
That's strange. it should be on the Notifications Tab in Sounds and Notifications. On the drop down list it should say "Messaging: New text message" you don't have that?
It's 'Messaging: New SMS Report' that I need and seems to be missing.
I have the same problem. I receive a LOT of SMS messages daily (100 and counting just today) and its horrible to get the same sound every 5 minutes!
I seem to have found the solution right here
http://www.saman-cz.com/ppc/index.html?drfovrw.html
Haven't installed it yet
Musicman - that settings is for incoming texts, on which you can set all the various options. 'Messaging: New text message'
Ubermark means that every time he sents a txt, you recieve a 'message sent' notification with sound.
What we are missing is a like for like setting for texts on 'Messaging: Sending MMS' - this would allow us to remove sound and/or notifications for text's sent.
Anyone any ideas?
Reg Edit to fix:
- HKLM\SOFTWARE\Microsoft\Inbox
- create a new key "Settings"
- create a new string value "SMSNoSentMsg" and set the value to 1
do a search fro schap's tools and you can disable it from there
monkeygadge said:
Reg Edit to fix:
- HKLM\SOFTWARE\Microsoft\Inbox
- create a new key "Settings"
- create a new string value "SMSNoSentMsg" and set the value to 1
Click to expand...
Click to collapse
Its actually - HKLM\Software\Microsoft\Inbox\Settings\SMSNOSentMsg=DWORD:1

SMS Sending Notification

Hi
One thing i am missing on my Jade is the notification bubble that pops up and alerts that message was sent ( NOT a message delivery notification from network operator )
I know is somesort of registry string but i could not find it
Anyone can help ??
Myster said:
Hi
One thing i am missing on my Jade is the notification bubble that pops up and alerts that message was sent ( NOT a message delivery notification from network operator )
I know is somesort of registry string but i could not find it
Anyone can help ??
Click to expand...
Click to collapse
Go to
HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings\
SMSNoSentMsg (String Value) --> 1 (Disable) or 0 (Enable)
The Advanced Configuration Tool covers this and many other useful options.
Yes that's the one
Many Thanks

SMS & E-mail notification issues

Hi all,
I can't seem to change the settings for the notification of SMS and e-mail messages. Both seem to make the device come out of standby, play the notification sound, and show the blinking green light. It's annoying, and I can't seem to be able to change it (even with the TD2 tools).
Any one with the same issues?
Thanks
Have you turned off notifications for SMS in Sound Settings? Also, there's a cab floating around called SMS tools or something that may have this tweak.
or
Use a regsitry editor and go to the key:
HKLM\Drivers\BuiltIn\RIL
Set DisableSMSWakeUpEvent to 1
If the entry does not exist, you will have to create it.

Categories

Resources