hi
i flashed 1pcs s200 after flashed dont power on.
dont go to boot mode.
how can i restor to old rom or new?
best regards
did you try to hard reset?
did you try to hard reset?
search the stickys to find how, (hold power, camera, press reset, keep holding p+c until you see a question on the screen, then press green phone
qwazix said:
did you try to hard reset?
search the stickys to find how, (hold power, camera, press reset, keep holding p+c until you see a question on the screen, then press green phone
Click to expand...
Click to collapse
thanks but can not work?
same problem phone only white blink and cant enter boot mode...
elektronat said:
same problem phone only white blink and cant enter boot mode...
Click to expand...
Click to collapse
What can your device do? Does it turn on? Does it respond to charging?
with charge only red LED... but phone white blink ..
elektronat said:
with charge only red LED... but phone white blink ..
Click to expand...
Click to collapse
1. did you try another battery?
if it seems to boot ( with boot up sound, but white screen ) then go to step 2.
2. reset you LCD display, how?
- disconnect the LCD cable,
- after 10 second,
- connect it back to the mainboard.
Good Luck.
ı have same phone and same error..
Customer try it ROM upload after phone dead... With charge phone some time RED LED.. but LCD white blink very fast.. PHONE cant enter BOOT mode, ı try 2-3 batery but no result ı think BOOT dead
Guys,
You said you flashed your ROM but give no details
Tell us what you have done in detail and someone might be able to help, like me
Did you hardspl properly? Did you use correct version ie G3 or G4. If u have used wrong one, ur pretty [email protected]
More detail plz
Related
Hi! After flash my Acer S200 don't start. Just write : Cleen Boot ACER.
If someoane can help me I waitt your sugestion. Thank's very mutch.
surdu_petru said:
Hi! After flash my Acer S200 don't start. Just write : Cleen Boot ACER.
If someoane can help me I waitt your sugestion. Thank's very mutch.
Click to expand...
Click to collapse
What ROM did you flash? sounds like a bad flash... reflash, or try a different ROM
Hello!
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
surdu_petru said:
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
Click to expand...
Click to collapse
you didn't break your device , you can reflash it following the flash instructions included , for an example , in rafyvitto's rom's post .Just have a look there .
surdu_petru said:
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
Click to expand...
Click to collapse
If it dosnt start by camera press button and hold then reset button(this puts device in bootloader mode) if that doesn't place your device in bootloader mode its brick't, thats is if you have the 1.00 radio.
Hi!
rafyvitto said:
If it dosnt start by camera press button and hold then reset button(this puts device in bootloader mode) if that doesn't place your device in bootloader mode its brick't, thats is if you have the 1.00 radio.
Click to expand...
Click to collapse
Thank's Rafyvitto , but I press camera button end hold reset , the phone don't start, just write in black screen with white : S200_3.003b.00_EN
Clean Boot
acer
end don't work , don't start . I waitt 1 hour but the screen dosen't change , it's the same screen like begining. I don't know what I make , maybe I flesh it with a wrong rom , but now if you know ? it's posibile flash again or make something for start , if the phone don't start? Thank's very much....
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Hi!
rafyvitto said:
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Click to expand...
Click to collapse
I will try now. Thank's again.
Hi!
rafyvitto said:
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Click to expand...
Click to collapse
No, my Acer S200 don't want to start reflash, I try exactaly end the red led is blinking but the all the flash rom don't start....just say update failure veryfi the connection USB. I trying with the Acer_EUU haker version 1 end 2. I thing that the phone is dad. Maybe is another solutions? I waitt...Thank's again, very much.
Heelo!
If you know , maybe it 's an solution for boot the rom on the storage card ? I thing , if the phone don't connect with the pc with usb cable is normaly that the flash don't start, maybe if I put the rom on the storage card then the phone will try to boot on the storage card, but I don't know how to make that. Thank's again.....
Hi!
Greats thank's again Rafivitto! I will try press cammera + volume + power end reset and the phone start the reflash. Merci beaucup.....
Hy all!
I have problem with clean boot logon... I done hard reset and device stuck at Clean Boot logon...
Would like to know how to flash it without activesync? I downloaded OEM ROM just can not install it without the NeoTouche beeing synchronized via active sync...
Please help how to do that without active sync...
Hi!
matjazz said:
Hy all!
I have problem with clean boot logon... I done hard reset and device stuck at Clean Boot logon...
Would like to know how to flash it without activesync? I downloaded OEM ROM just can not install it without the NeoTouche beeing synchronized via active sync...
Please help how to do that without active sync...
Click to expand...
Click to collapse
You need active sync for flash your s200 , so you plug usb cable between pc end phone with micro usb. After that you need to entre in bootloader mode ( for bootloader mode you need press simultanly power , camera end volume end reset while the red led is blinking) . If your led red is blinking then you can start flash rom with any flash , but I recomanded for you an original flash with ACER_EUU.exe hack , not originaly for that just download hack acer_euu.exe end replace it in directory flash rom. If you still can't make the reflash I need to know what is your version of rom? Your version is in the left corner on the first line. See you later....
update failed
Hello,
I wanted to update Neotouch from official rom 2.003.00_de to 3.003c.00_de.
The update failed and when i start the device, now I see on display:
- in the upper left corner: s200_3.003c.00_DE
- in the middle "clean boot"
- under it "acer"
I tryed to go in the bootloader mode:
I removed the Akku for ca. 10sek.
I connected device and PC via usb.
I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)
Then I started on PC the "EUU_Acer_S200_3.003c.00_DE_03.03.08_3.003c.00_20100205.exe"
...extracting...install prompt...ok...
window: "welcome to the device software update utility" etc. with the notifications to connect
... next..
and then:
"Update failed. The device software utility occurs trouble connecting to your device"
what am I doing wrong?
surdu or other , can you help?
Thanks!
I unpacked the originial
"EUU_Acer_S200_3.003c.00_DE_03.03.08_3.003c.00_201 00205.exe"
and replace the "ACER_EUU.exe" with
File
from this Thread
http://forum.xda-developers.com/showthread.php?t=628402
Then I clicked the "EUUFrontEnd.exe" and the "install prompt" started, then for a second, there is an Error window.
I searched in the posts here in neotouch forum for this problem, but idont understand much and my english is very bad.
Iam only user, I have no background knowledge. Please help me, if you can.
did you bring your device on "flash mode"?
what rom does it have now?
When I bouhgt mine I did excactly the same thing
It had 2.003.... official ROM and I flashed it with the new official 3.003b.....
camera+reset and then the steps as you did.
maybe it's something in the 3.003c drivers and the hacked .exe does not work..
Philippe_Raimo said:
did you bring your device on "flash mode"?
what rom does it have now?
Click to expand...
Click to collapse
1. I do not know exactly...
"I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)"
Is this really the Bootload Mode?
2. see my Post Nr. 14
Now i can see upper left corner: s200_3.003c.00_DE
maybe it's something in the 3.003c drivers and the hacked .exe does not work..
Click to expand...
Click to collapse
mmh..what should i do...
Hi!
olsching said:
1. I do not know exactly...
"I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)"
Is this really the Bootload Mode?
2. see my Post Nr. 14
Now i can see upper left corner: s200_3.003c.00_DE
Your phone S200 is not dead, you can save it, but is 2 way from the led red blinking, if your led red is on/off very well then is the bootloader, if the red led is blinking with have a small break (off) then you aren't in bootloader. Then you need press the Volume down + camera buttons + power button + reset with the pen , all the button togheter, while the red led is blinking (on / off) quickly end now you are in bootloader. After that you need Acer_EUU.exe Hack version v1 ( is exactaly - 3.432.960k ) .Just replace it end go. Good luck!
Click to expand...
Click to collapse
Hi Olscing! again
from this Thread
http://forum.xda-developers.com/showthread.php?t=628402 you download Hack v2 is no't good for you. You need v1 end the Acer S200_2.003.00_EN.
neotouch is running again
Thanks for your help surdu!
But now i could help myself
I flashed a customrom here from the forum. It stopped at 99,2%!
But the device was able to start and the rom runs.
Then i started the official acer update again and without problems it was installed. Now i happy again!
hey,
i tried today to change my rom for defy from 2.2.2 to 2.1 (doesnt matter why..)
after let it go to 100% and then he sad please power off the phone manualy
i power off and it doest reply, i close the rsd and then just the moto logo apper .. i tried hard reset but it doesnt help to the sitiuation.. the room was 36mb but the nand have a 100+ mb and i didnt touch the nand or put it in the sd card - is that matter?
ty for helping, niv~!
you bricked your phone by trying to downgrade the bootloader version. flash back the 2.2.2 sbf and it should work again.
sent from my cm7 defy...
i dont think my phone apper in RSD LITE - SHOW DEVICE..
nivv said:
i dont think my phone apper in RSD LITE - SHOW DEVICE..
Click to expand...
Click to collapse
boot up to the bootloader (when turned off: vol up+power button long press), and after that connect to pc. maybe this way it will recognize your phone. does the white led light up when connected to pc?
sent from my cm7 defy...
zakoo2 said:
boot up to the bootloader (when turned off: vol up+power button long press), and after that connect to pc. maybe this way it will recognize your phone. does the white led light up when connected to pc?
sent from my cm7 defy...
Click to expand...
Click to collapse
i do that and it get me to the white triangle with exclmation point in it if that is the bootloader..
the white led is ON when it connected to PC
nivv said:
i do that and it get me to the white triangle with exclmation point in it if that is the bootloader..
the white led is ON when it connected to PC
Click to expand...
Click to collapse
volume UP not down the triangle with the exclamation mark is the stock recovery, you can access that by pressing vol up+down at the same time at the triangle. the bootloader is a terminal-like black screen. but be careful: without any working rom you cant charge your phone, and if the battery is low, you cannot flash anymore. good luck!
Question go in the Q&A section
Hey Guys,
My phone has this white screen of death, it´s just white, and on the bottem of the screen there are these weird pixel things.
Anyway, I can´t boot into CWM & Download Mode, so I don't know how to fix it, i can't bring it to the store because the warranty has been over for like 1 year. It happend when i tried to flash a v10 baseband on Jelly Bean..:crying:
Anyway, is there someone who can help me ? i would really appreciate it!!
Thanks
P.S. English isn't my native language.
Good afternoon.
Please describe better what means "has this white screen of death". Is it everywhere?
Can you enter any of the following modes?:
Recovery Mode: (Vol Up) + (Quick Access) while connecting phone to USB and turning it on
Download Mode: (Vol Up) + (Vol Down) while turning it on (either with or without connecting to computer USB)
SSCHAPCHOY said:
Hey Guys,
My phone has this white screen of death, it´s just white, and on the bottem of the screen there are these weird pixel things.
Anyway, I can´t boot into CWM & Download Mode, so I don't know how to fix it, i can't bring it to the store because the warranty has been over for like 1 year. It happend when i tried to flash a v10 baseband on Jelly Bean..:crying:
Anyway, is there someone who can help me ? i would really appreciate it!!
Thanks
P.S. English isn't my native language.
Click to expand...
Click to collapse
remove battery/sim/sd while you press vol- connect your phone to pc throught usb cable and than start kdz selecting "emergency" and flash your firmware
good luck!
I have same problem, did the same thing and any mode-recovery or download is just impossible to reach. KDZ updater doesn't recognize my phone, so I don't know how to do it. When I hit power button, it is white screen with some strange pixels at the bottom, and then it comes to normal, but i can't unlock or do anything on my touchscreen.
Any help? Thanks in advance!
JosipLL said:
I have same problem, did the same thing and any mode-recovery or download is just impossible to reach. KDZ updater doesn't recognize my phone, so I don't know how to do it. When I hit power button, it is white screen with some strange pixels at the bottom, and then it comes to normal, but i can't unlock or do anything on my touchscreen.
Any help? Thanks in advance!
Click to expand...
Click to collapse
Follow these instructions...
- Remove your battery and put it on the phone again
- Hold the volume down button and connect your phone to the PC without holding the power button (the screen will get kinda red)
- Open KDZ and flash stock ROM
- Enjoy your phone
iTzMeB1tch3s said:
Follow these instructions...
- Remove your battery and put it on the phone again
- Hold the volume down button and connect your phone to the PC without holding the power button (the screen will get kinda red)
- Open KDZ and flash stock ROM
- Enjoy your phone
Click to expand...
Click to collapse
good
Jonas Cardoso said:
good
Click to expand...
Click to collapse
Ué
( ͡° ͜ʖ ͡°)
iTzMeB1tch3s said:
Ué
Click to expand...
Click to collapse
Jonas Cardoso said:
( ͡° ͜ʖ ͡°)
Click to expand...
Click to collapse
( ͡° ͜ʖ ͡°)
what if this dont work? see here: https://forum.xda-developers.com/showpost.php?p=73055384&postcount=19
How can I know I'm in the download mode or which ever the state it is.
Hey guys,my phone will automatically turn itself on when i insert my battery. Then after the Samsung logo, the screen automatically turns black. I first suspected that it was a battery problem, but that did not turn out to be the case. I think it has something to do with the power button. I also tried to boot it up into recovery mode but the screen still went black before i had the chance to do anything. Any help would be appreciated. Thanks
snejko43 said:
Hey guys,my phone will automatically turn itself on when i insert my battery. Then after the Samsung logo, the screen automatically turns black. I first suspected that it was a battery problem, but that did not turn out to be the case. I think it has something to do with the power button. I also tried to boot it up into recovery mode but the screen still went black before i had the chance to do anything. Any help would be appreciated. Thanks
Click to expand...
Click to collapse
Hi
it may be the power button , try to press on it a few time and see if you can release it ..if not you may have to replace it , is not an uncommon issue
MAX 404 said:
Hi
it may be the power button , try to press on it a few time and see if you can release it ..if not you may have to replace it , is not an uncommon issue
Click to expand...
Click to collapse
Hey, i don't think it's problem with the power button,when i was on the phone he just turn off and from then when i try to start / reboot he just turn off after the samsung logo..
snejko43 said:
Hey, i don't think it's problem with the power button,when i was on the phone he just turn off and from then when i try to start / reboot he just turn off after the samsung logo..
Click to expand...
Click to collapse
Maybe not..
can you go to recovery and download mode? .....
are you stock or custom ? try to reflash the rom and see if it helps..
MAX 404 said:
Maybe not..
can you go to recovery and download mode? .....
are you stock or custom ? try to reflash the rom and see if it helps..
Click to expand...
Click to collapse
Stock rom and no i can't go to downlaod or recovery mode,like the phone get 5 sec of life when i press the power button and then he die.. even my PC don't detect it
snejko43 said:
Stock rom and no i can't go to downlaod or recovery mode,like the phone get 5 sec of life when i press the power button and then he die.. even my PC don't detect it
Click to expand...
Click to collapse
Even with the charger on?
Why you said that the battery is ok?
It's definitely a stuck power button
Sent from my GT-I9505 using XDA Free mobile app
Try to let the battery drain and make the phone die, then try to charge it when its off and get to download from when its off.
Also have you tried a jig to get into download mode and stay there?
Hello guys,
I wanna ask something bad news for me,
Can u guys help me step by step to fix my phone,
The problem :
1. when i'm press power button, its show the white logo of samsung i-9505 and then Restart and showing it again, and restart anymore, [searching on google it's called boptloop]
2. When i take off my battery from the device, and put it back, its going auto start with samsung white logo again, and bootloop like 1. Problem,
3. When i connect the usb device on computer, its show the charging mode with white screen and the lighting, but only around 5sec, and then turn off, and turn on with the same case,
4. I cant go into recovery mode [volUp+home+Power] anyway, because when i press them, my device go into the no.1 problem,
5. I can go into download mode but just only 5 sec, and return to no.1 problem
My device:
Not rooted,
not install cwm
Before the device bootloop i just use camera to take photo, but going overload[hot], and the device force shutdown,
Can u guys help me why my device like that?
im from indonesia, and sorry if my english so bad, i wish i've luck today,
zxccvvv said:
Hello guys,
I wanna ask something bad news for me,
Can u guys help me step by step to fix my phone,
The problem :
1. when i'm press power button, its show the white logo of samsung i-9505 and then Restart and showing it again, and restart anymore, [searching on google it's called boptloop]
2. When i take off my battery from the device, and put it back, its going auto start with samsung white logo again, and bootloop like 1. Problem,
3. When i connect the usb device on computer, its show the charging mode with white screen and the lighting, but only around 5sec, and then turn off, and turn on with the same case,
4. I cant go into recovery mode [volUp+home+Power] anyway, because when i press them, my device go into the no.1 problem,
5. I can go into download mode but just only 5 sec, and return to no.1 problem
My device:
Not rooted,
not install cwm
Before the device bootloop i just use camera to take photo, but going overload[hot], and the device force shutdown,
Can u guys help me why my device like that?
im from indonesia, and sorry if my english so bad, i wish i've luck today,
Click to expand...
Click to collapse
Your power button is stuck. Either replace it or try to wiggle it loose.
Lennyz1988 said:
Your power button is stuck. Either replace it or try to wiggle it loose.
Click to expand...
Click to collapse
Can u explain why if my power button going stuck but I can go into download mode just with first time press power+VolDown+Home? But hard to go into recovery mode [power+VolUp+home] however I tried many times?
I appreciated with your suggest,!
zxccvvv said:
Can u explain why if my power button going stuck but I can go into download mode just with first time press power+VolDown+Home? But hard to go into recovery mode [power+VolUp+home] however I tried many times?
I appreciated with your suggest,!
Click to expand...
Click to collapse
Because recovery takes longer to boot thus it will reboot before it enters recovery.
zxccvvv said:
Hello guys,
I wanna ask something bad news for me,
Can u guys help me step by step to fix my phone,
The problem :
1. when i'm press power button, its show the white logo of samsung i-9505 and then Restart and showing it again, and restart anymore, [searching on google it's called boptloop]
2. When i take off my battery from the device, and put it back, its going auto start with samsung white logo again, and bootloop like 1. Problem,
3. When i connect the usb device on computer, its show the charging mode with white screen and the lighting, but only around 5sec, and then turn off, and turn on with the same case,
4. I cant go into recovery mode [volUp+home+Power] anyway, because when i press them, my device go into the no.1 problem,
5. I can go into download mode but just only 5 sec, and return to no.1 problem
My device:
Not rooted,
not install cwm
Before the device bootloop i just use camera to take photo, but going overload[hot], and the device force shutdown,
Can u guys help me why my device like that?
im from indonesia, and sorry if my english so bad, i wish i've luck today,
Click to expand...
Click to collapse
It started the same problem for me today. Please do post if you come across a solution.
ajhavery said:
It started the same problem for me today. Please do post if you come across a solution.
Click to expand...
Click to collapse
I just gave him the solution.
Lennyz1988 said:
Because recovery takes longer to boot thus it will reboot before it enters recovery.
Click to expand...
Click to collapse
Hey buddy, thanks for ur help,,
now my phone going recover, ,
I just make sure the problem of the power button is stuck, with just press volDown+Home, and bring me to download mode, thanks in advanced
ajhavery said:
It started the same problem for me today. Please do post if you come across a solution.
Click to expand...
Click to collapse
I have post the solusion or maybe to make sure ur phone got the same problem like me with just press volDown+home only, because in this case, your power button always pressed however ur power can u press urself,
For fix it?
I just open the casing of the device, and bring me to 'motherboard' and all components of the device,
And then I'm force to press the power button myself, with low power,