I'm not sure exactly why it's happening, the last thing i remember doing before this problem occurred was uninstall some programs, and decrease the text size in settings.
But everytime I power on the handset, it will boot up fine. But then the activesync information screen (the one that shows your recent syncronizations) will pop up, and my phone freezes up right there. It's pretty much unavoidable at this point, everytime I reset my phone its the same problem. I'm able to do a soft reset at this point, but that's pretty much it.
If it's any help, one of the programs I removed was pTravelAlarm (Burr oak software) i got rid of that because i was getting a "Cannot execute \Windows\pTAmgr.exe" Notification Error during startup, which now that I mention it, the error still pops up even after i removed it.
Is there anyway to perform a hard reset without having to be in windows, or connected through activesync?
Or am i pretty much boned at this point.
You don't need or want to be connected to Active sync when doing a hard reset!
Hard reset is pressing both soft keys at the same time as poking the stlus in the soft reset hole. This takes device (after some menu screens) back to the way you got it originally.
Mike
ah, ok, i was under the impression that the "Reset" key was actually on the screen. yes im a silly newbie . Thanks!
tyfin85 said:
ah, ok, i was under the impression that the "Reset" key was actually on the screen. yes im a silly newbie . Thanks!
Click to expand...
Click to collapse
We're all newbies to start with and we're all still newbies with some aspect or other of Hermes or WM5.
Use this thread if you have problems with hard reset.
Mike
I did a hard reset, and its working just fine. Though i do think i'll be updating the ROM, seeing as i've had many problems with the phone freezing up and recycling itself under the OEM ROM. Thanks again
tyfin85 said:
I did a hard reset, and its working just fine. Though i do think i'll be updating the ROM, seeing as i've had many problems with the phone freezing up and recycling itself under the OEM ROM. Thanks again
Click to expand...
Click to collapse
For many freezing up problems see my post on active sync here:
http://forum.xda-developers.com/showthread.php?t=288352
Mike
Related
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Hold down (and keep holding) the camera button while depressing the reset button. Hopefully it boots into a tri-color screen. If so, plug it into the USB port and, at the bottom of the screen, it should display "USB". If that happens, flash it with a *known good rom*, such as a stock T-Mobile rom. Don't try to be clever, the object is to get the phone working. Once the flash has started, *get up and walk away* for 15 or 20 minutes. Don't check in on it, leave it alone, It takes some time. When you hear it's little chime, it's done, rebooted and ready. If any of the above doesn't happen or the flash outright fails, then you may have trashed it permanently. It doesn't sound like it's beyond hope yet, however.
i have the wizard and im having the same problem after installing a ROM from this website...it just goes to the windows mobile screen with the numbers then shuts off...id really like to save my phone is there anything else i can try because that hard reset thing isnt working
axxeman001 said:
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Click to expand...
Click to collapse
Well same thing happened to me a few days back.. I had to Cold Reset [which restored it to factory defaults], but hey I got it working again..
Press Communication Button [Top Left] and Record Button [Top Right] at the same time and use the stylus to soft reset..
You will get a black screen, asking you to press "Send" to reset to "Factory defaults"
Press "Send".
Hopefully you should get your MDA working again ...
I read the "Above" in the HTC Wizard Service Manual [PDF] on the *last page* under the "Cold-reset" Section..
Bricked!
I installed this Omapclock and omapclockplus cab, and soft reset, like the thread said, and ever since then it hangs on the Windows Mobile boot screen, after the IPS/SPL/OS screen. I was using the OEM Cingular ROM.
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.1
I havent changed anything, other than add this program. It gets really close to booting, sometimes for a split moment finally to today for a mere instant (you hear the battery low tone) then reboots.
HELP!
Update: it gets to today but hangs then reboots... occasionally still get the battery low tone right before reboots. Reboots over and over and over...
Any help appreciated. Do I need to hard reset to factory now?
What did you clock it at?
I didnt clock it at anything, I installed the cab from the device itself, reset, and the result is what I described above
Just hard reset. I wish people knew the meaning of a bricked phone - a bricked phone is one that you can't boot, can't hard reset and can't flash firmware.
Suleeto said:
I didnt clock it at anything, I installed the cab from the device itself, reset, and the result is what I described above
Click to expand...
Click to collapse
And why do you need to post this same thing multiple times? Post it once and we will get to it.
http://forum.xda-developers.com/showthread.php?t=271012&page=10
--M
Sorry, just paniced, I've read some horror stories on here.
And I'm still getting to know the specifics of lingo, I thought bricked just meant at present does not work. Didn't know it meant doesnt work and cant fix. Sorry.
I'll try hard reset.
Can either of you (or anyone) tell me why you think it did this? THAT is most important to me. Thanks.
Suleeto said:
Sorry, just paniced, I've read some horror stories on here.
And I'm still getting to know the specifics of lingo, I thought bricked just meant at present does not work. Didn't know it meant doesnt work and cant fix. Sorry.
I'll try hard reset.
Can either of you (or anyone) tell me why you think it did this? THAT is most important to me. Thanks.
Click to expand...
Click to collapse
I think, the overclocking was set to its maximum because of it the device froze and the setting was done to overclock it on reboot.
That is why on every reboot your device froze, and restart and that's continous.
So a hard reset would do you work. But always beware b4 you overclock, people found out that 260mhz is stable speed. But i dont recommend it.
http://forum.xda-developers.com/showthread.php?t=299989 read this thread you'll come to know some of the problem.
I did exactly the same to my Wizard
A hard reset should get you back up & running. I hope you've backed up your contacts & everything. I hadn't!
I'm no longer using omapclockplus but the BatteryStatus plugin instead. I leave it at the default speed for most of the time but overclock it (with a single touch on the today screen) when using something like Skype that needs the extra oomph.
hi guys, this might seem to be posted a lot of times but i havent found anyone who experienced the same problem as me. ive flashed a custom rom (not found in xda dev) and the phone went well for 3 weeks to a month.however, today(lunchtime) i had a problem i soft reset my device and i was stuck at the 2nd splashed screen. i dont think my hermes is bricked because i can do anything a normal hermes do before. (pda function, calls, sms) really no problem at all until today. ive done what the wiki said like
Problem 2: stuck on windows mobile screen
Try to soft reset with stylus and wait 5 minutes on the windows mobile screen to see if OS boots
If all you get is same windows mobile screen, remove the battery for some time (about 20 min should be enough) and put it again.
Again, if all you get is same windows mobile screen do a hard reset.
If doesn't solve the problem do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset with stylus when the device asks you to press spacebar.
Check if you might have the NO GSM Problem
well i cant go pass the 2nd splash screen so what i did was hard reset it. and problems gone. my concern is ive lost a lot of documents because of what happened. so i just wanna ask you guys what could be the problem and the solution to prevent this from happening again.
much respect to all here!
TIA
What do you do just before the problem occur?
best thing to do is hard reset you phone this will reinstall you OS and resolve the problem. You need to old the 2 top soft key and press the reset but with your stylus. This will then bring then take u into the hard reset mode. follow the prompts on ur screen by using your keyboard .
This will work as i have experienced the same problem
kind regards
Ash
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
hi guys
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
ive done both of this in my ppc. hehehe
@sir mikechannon
yeah that was my badd. havent done bckup and all. hehehe
@sir ghz
hmmm nuthin, just the usual... havent installed anything prior to the problem.
well guys... thanx for the comments my ppc doing good now, i just hope it wont happen again. hehehe. much respect!
Hi all, first time poster long time browser I checked the wiki and did a search but couldn't find a similar post. Here goes..
Yesterday i tried to connect to this protected wifi at a coffeeshop, but my HD did not manage to connect even after entering the network password. In the end it froze. The home screen was showing, i could feel the vib when pressing the screen, but no action happened. I did a soft reset, but that didnt make a difference... nothing working still, while it is still trying to connect to wifi.
Then I first did one hard reset. I managed to get to the screen where i am asked to touch the screen in order to configure the device. While i could feel the vib, nothing happened. I did a second hard reset, ended up at the same screen, but this time there is no vib when pressing the screen... and still nothing is happening. Same situation when doing a third hard reset.
I am lost for ideas.... Have anyone of you ever experienced something similar and what did you do to resolve it? Or have anyone any suggestions as to what I should try next??
Very bad dude,
what you can do (i dont know if this will work).....Flash your original rom again. it is a kind of a hard reset, but maybe this will work.
can you boot to boatloader (three color screen), and see the text USB when connected to pc?
Hi Kadir,
thanks for your answer.
I am trying to flash my rom using the excellent tool Hard-SPL package from OliNex, but to no avail.... i keep getting error message 202 meaning that it can't connect with the device...
This may sound obvious, but just in case... have you tried to remove the battery when the device is turned off? Is the only way to ensure you are fully turning it off, in case you have some kind of 'static' acting up. I had a similar issue on a PDA and also in my notebook, and was solved by removing battery.
hi,
thanks for the advice. I wish this was all it took, but alas no, i am not that lucky. I am starting to think this is a hardware issue....
can you see the 3 color screen?(when phone is off push power on + volume down button and keep volume down pushed).
if yes can you see it you are now in the bootloader. just chech if you see text usb, this means its connected.
and then flash, no 202 anymore.
do not use hard spl if you want HTC to repair your phone(warranty issue)
Don't you have to disable USB connection in ActiveSync too? Or was that just me?
I found the Flash program killed active sync anyway, but you're right all the guides say to disable it.
I installed some software, a voice activation software, and now it crashes everytime i try to navigate to settings to remove the software. I have to reset it from the back everytime.
How can I sort this out
Sounds like time for a hard reset?
Sfkn2 said:
Sounds like time for a hard reset?
Click to expand...
Click to collapse
+1
I'm fairly certain you are going to have to hard reset too. Sorry
i just suffered the same fate thanks to my MT4.
btw , if you have sktools, you can try the remove program from there too
How do I do a hard reset? Wasn't that only done through the settings option on the phone?
Hard reset means you return the Xperia to "out of the box" state ...you loose all data and programs
1. turn off the phone
2. Hold both right and left buttons (the hardware buttons that stick out a bit, right under the screen)
3. press power button, while still holding the others
4. follow on screen instructions (to press "R" to confirm reset, slide out and use the hardware keyboard)
thread
I had exactly the same problem this week.
I had bought the program and installed it successfully. However after installing it again after a hard reset, it did exactly as you describe, crashing when you try to access settings.
I think the version I had purchased was MSVoiceCommand_1.6.17913.CAB. There is a version getting around these forums (MSVC_US_PPC_1.6.19209.bengalih.CAB) which did the trick for me.
Hope this helps
CapsLock1 said:
I had exactly the same problem this week.
I had bought the program and installed it successfully. However after installing it again after a hard reset, it did exactly as you describe, crashing when you try to access settings.
I think the version I had purchased was MSVoiceCommand_1.6.17913.CAB. There is a version getting around these forums (MSVC_US_PPC_1.6.19209.bengalih.CAB) which did the trick for me.
Hope this helps
Click to expand...
Click to collapse
I'm scared installing any other voice command now, I've reset the phone too many times.
IS this software even that good?
I had the same problem too
In lieu of installing a 3rd party software (eg sktools, memmaid, etc) you could try uninstalling it via active sync. Or maybe remove it from the startup programs then soft reset.