Hi guys!
I'm trying to use (first time 4 me!) WiFi connection from my laptop and my Jamin in this way:
Start from scratch (without connections...) and turn on both wifi.
Create a new connection for only 2 devices from my Jamin without any security (4 the moment).
Now I can see the new wifi network on my laptop...
I chose connect from my laptop and the connections estabilish.
Handshake to retrieve the ip address is oaky and now I've got the connection from my 2 devices (Jamin and laptop).
On laptop I can ping the ip address of my Jamin but now I don't know what can I do with this connection.
Is it possible to share some folder on laptop and/or on Jamin to copy/remove/move some files?
Is it possible to use the std modem connection of my laptop for browsing the web from Jamin?
Is it possible to sync with Activesync my Jamin?
How can I do it, guys?
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
1) To browse, copy, move and delete files on you laptop just create standard windows shares. (right click folder or drive, select sharing)
To access the files from the Jamin select 'open path' in file explorer and type \\computer-name\\share-name. I recommend using the free Total Commander because built-in file explorer takes up to 3 times as long to transfer files (no idea why, it just hangs in the middle).
Unfortunately Windows Mobile does not support file sharing so this will not work viceversa (looking at Jamin files from laptop)
2) To serf the web through laptop internet connection you have to use 'internet connection sharing' (not a problem if you are using Win XP).
On the Jamin go to Settings->Connections->Network Card->Adapters
tap on your WiFi card in the list and enter your laptops IP as the gateway.
3) Sync is possible but tricky. I don't know the exact procedure but you need to set up a VPN (MS removed WiFi sync from AS 4+ for security reasons). The procedure is documented somewhere here, I just don't remember where exactly.
Great! Many thanks! ;-)
whoops...
Just another think....
What about hotspos?
I never search for a hotspot near me because I think I will not able to connect to a hotspot.
Can you exlain me the procedure to search and use hotspot? How can I see if the found hotspot is open or closed? Do you use some sw to connecti with WiFi?
I am not sure about your laptop, it depends on its WiFi card driver.
As for Jamin it is very simple: Turn on WiFi, it will automatically search for all available networks and display them stating if the network is open or secure. Then you just select a network you want and it will try to connect.
Also in settings->connections->Network cards you can see all the networks your device detected (even those that are not in the vicinity any more) when WiFi is on. Tap on a network to change its settings (like encryption type if any) or tap and hold for a menu.
If you don't mind wasting space on .NET CF 2 You can download a free app called Hitchhiker that helps auto-configure WiFi network connection.
Just remember: even if you found what looks like an open Hotspot it may be just an unsecured network that doesn't provide internet acces ot the network may block devices by MAC address, in this case it will show as open but you will not be able to connect.
Many thanks! ;-)
So, is it possible that I can connecto to a hotspot but I can't use it or if I see the hotspot connected that means that I can use it to surf the web?
After the connection is estabilished what I have to do or confiugre to surf the web using that connection?
Thanks a lot guy! You're helping me so mutch!
Whether you have internet access or not once you are connected depends on the network (what you think is a hotspot may be in fact someones home network that does not have internet access). If it is a public hotspot you don't have to do anything once you are connected except to open Internet Explorer.
Sorry 4 my stupid question but..
what is the difference between accesspoint and hotspot? :-(
I'm always thinking (WRONG) thet accesspoint is home LAN and hotspot is internet...
The definition thing is kind of tricky. When you say access point some people might just think of a device with an antenna that plugs in to your network to extend coverage and others might say it is the same as hotspot.
Hotspot is generally defined as a public access WiFi network.
All of that is semantics though. When you turn on a WiFi capable Pocket PC or laptop it detects everything with WiFi around it.
It can determine if the source is another computer (Ad-hoc network) or if it is a router (real network), what standard it is (g/b) and whether it is secured (requires key) or not. Also if the network broadcasts SSID (disabling it is another security measure) you may learn its name, although it may be set to default, which is usually the router model.
As far as I know there are two ways to learn what you are connected to:
1) Ask who ever is in charge of it.
2) Poke around, and see what you get.
One more thing: There is an app (not free) called PocketLAN. It shows you the network (on your Jamin) just like you would see it in Network Neighborhood on the PC, plus lets you ping other computers and stuff. You may want to check it out.
Thanks man!
Well! Yesterday I was able to manage shared folder of my laptop from Jamin with WiFi connection.
Thanks a lot!
Now I have another problem.... I clear all my "wifi networks" (?) from the tab visible in the screenshto.
I also clear all my wifi networks from laptop.
Tha problem is that I'd like to configure somethink on my laptop in order to automatically connect from my Jamin on it.
I'd like to turn on the wifi on Jamin and receive the notification that a connection can be estabilish to my laptop...
I tryed a lot but I can't do it!
Is it possible? The tab in attachment what rappresent? I have to confiugure somethink there?
I'm always thinking that wifi connection are visible simply turning on the wifi of any device...
Is there some guide for dummys? I don't want to annoing so mutch... :-(
levenum said:
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
Click to expand...
Click to collapse
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
phreaker18 said:
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
Click to expand...
Click to collapse
What are you trying to do? What is the problem you are getting?
If you start from the beginning I might be able to help you better.
In any case once you open 'Network selection' you will see two combo boxes - "drop down" lists.
You need to select same thing in both - "My ISP" than make sure when you connect to a network you select "The internet".
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi. it shows the connections excellent on both devices with ip address 169.254.72.236 on ppc nd 169.254.130.63 on laptop. i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
Related
G'day all,
Well I got my jasjar today, and essentially I was originally under the impression that with this I would be able to use the wireless technologies of my laptop and jasjar to sync outlook, and browse the fiels on the notebook etc.
Then reality hit me.
You cannot sync via wireless. Then as it turns out I have no clue on how to setup a wireless network..
So im just wondering if anyone can inform me, is it possible for my jasjar and centrino notebook to communicate with each other wirelessly? If so what do I need to do in order to do that.
Thanks in advance
a very confused wireless enthusiast.
ActiveSync will not work on wi-fi, but you can setup a device-to-device network and use files on a share on your computer. If your Centrino has Bluetooth, you can use ActiveSync with that.
i have AS over bluetooth fine, and allows me to browse the internet etc
i have WIFI configured at home and work which allows me to browse shared folders with passwords and permission, run terminal server to my XP and our Terminal Server, and allows me to run Terminal Server over wireless over the internet direct to my remote work servers.
so it really depends on what you want to achieve, it will more than likely be a combination solution.
WIFI <> AS
WIFI = Internet and Shares and Terminal Server
WIFI = Streaming music and videos
Bluetooth = AS
Bluetooth = Internet
Bluetooth <> Shares and Terminal Server
Well my laptop doesnt have bluetooth so that is no good to me.
Yeah I just want to access the laptops music, video or documents wirelessly. Im a little or completely lost as how to do this, I do not have broadband, and I have no networking experience really.
All I have is a Centrino laptop armed with the latest wifi components, and a jasjar.
I managed to make a device-to-device connection as someone suggested, and the devices appeared to connect, but I couldnt seem to do anything with them as such.
Try Resco Explorer (www.resco.net) It allows you to map network drives (once you have your device-to-device connection sorted)
Wiz - Off topic but can you share how you got your O2 Exec Blackberry Enabled? I'd like to do the same. Ta - philg
Got resco explorer, gotta say thats a handy lil feature packed app. But to my problem at hand....does anyone have or can anyone give me a run down of how to get a device-to-device networking happenng.
I can get the two devices to connect as such via wifi, both jasjar says connected as does XP, however when I go to map a network drive, in Resco or XP fo rthat matter, I just an a message saying no computer is connected or availbe. This despite the fact that it is right there!!
Any suggestions, tutorial recommendations?
Thanks.
r u using xp pro or home?
what sort of antivirus r u running?
firewall? ms or other
any other security settings imposed?
generally, go to pc, find folder u want to connect to, RMC, properties, sharing, enable with a name you like, apply security with password (nb sharinmg over wifi will allow others to access without security).
goto pda, resco, map drive, type in \\computername\sharename, enter your username to log onto pc and password (assuming these were the same pemissions you applied when setting up)
I had this working using a wifi access point via a local router, but norton screwed it up and been unable to fix....
Yes XP Pro
Default Network Security really, like I said ive never really used them or accessed the features so usually keep em closed.
and running NIS 2005. But yeah look im not a total noob, ie I disabled NIS at one point to see if that was hampering the connections, and even enabled it and enabled full access and that did nothing either.
what you suggested I pretty much did.
however, when ive set up the device to device connection it gives me security options ie WEP WPA etc, done these restrict other networks from using the shared folder?
I ask because there are a fare few wireless networks around me, wouldnt want to give any of them access to my stuff, even if it is only my music and some documents.
If you start your WIFI on your PPC and PC, does the WIFI icon on the PPC create the connection, ie the antennae and two arrows that remain still.
If so, then you have got the connection to the PC, we just then need to get the folders and access to each other. If not, then we cant get any further till we resolve this issue.
RMC My Computer or go to control panel system. Far right Tab allow remote connections, tick the box to allow. This should allow a Terminal Server connection from your PPC to your PC. So find out the IP of your PC, then open TSC and enter the same IP address and see if it connects. If it starts to get create a connection via GPRS/3G cancel it. This will be due to the "My Work" and "Internet" settings which we will have to come back to.
If it you can open a TSC then you have established the WIFI and can create and authenticate a connection, so it means we have a problem with the foler sharing.
So in summary, doing the above will:
1. Estabish that the WIFI connection using WEP is working
2. That you are connecting over the same common network using TSC to connect and control your PC from your PPC
3. THat the problems are folder sharing related
Let me know how you go.
I wont be able to try these suggestions until tomorrow but im pretty confident one of these will work, thanks for taking the time, I will definitely try em tomorrow.
But just for what information I have ATM, yes the wifi icon you described is there, so like I said the PPC is definitely connecting, just when its connected I dont seem to be able to do much.
Will let you know how I go
THanks again
I have resolved the problem that I have been having with connecting to a network share, when I could before and cant now....
The answer was simple, and I cant believe how simple.
The answer was found here, and posted by DUTCH
http://forum.xda-developers.com/viewtopic.php?t=21317&highlight=network+wifi+connection+share
"Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings."
If your not sure where this is let me know, but it provided and immediate fix for me. ...
Well, actually, I did two things simultaneously, so not sure which actually worked. I also went into the specific connectsion > Network Cards on the PPC, Network Adapter set to work, then Wireless tab, found the specific network opened this and changed this from internet to work.
So the combineation of the IP settings and the change from internet to work allows my ppc to connect to my computers folder shares.
well, i tested it furter.
If i left the work setting on my network, then when I used the internet, it opened and connected a gprs connection to open the web site.
so i changed the network connect back to "the internet", and was able to use the network card to connect to the internet and access the web.
I was also STILL able to access a network share whilst the network connected to "the internet", so the solution for me was
"Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings."
Guys i have searched over 1 hour in the Internet but no solution sorry but still i cant get connected.
If someone please Post Step by step procedures i would be very thankful
here is some useful but not completed websites:
The Best one seems to be this but it is very old:
http://www.microsoft.com/windowsxp/using/networking/expert/bowman_september24.mspx
Result from other Sites:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=453&more=1
http://www.modaco.com/index.php?showtopic=237804
Drop it. No way to do it. I've posted here just a few weeks ago, tried everything, with no luck. It simply isn't possible with the latest ActiveSync 4.1, and the older one 3.8 which has the wifi functionality, is not compatible with WM 5.0.
So forget about it. You can connect through wifi, but no synching...
Thank you very much but what is the benefith to connect through wifi?? i cant even send a file or connect to internet!!! At list give me a clue to conect Internet through WiFi & PC. but i think if we do the right Setting for IP in WiFi we would get connected some how....
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
krale said:
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
Click to expand...
Click to collapse
Resco File Explorer will let you add "share drives" also. You can add directories or drives.
Upss...
It seems that sharing internet connection through wifi is NOT possible with WM5... They have just ruined everything with this stupid upgrade of activesync!
Anyone aware of a work arround so my PC internet connection works on my PPC connected to it with ad-hoc wifi?
as i said i think with IP configuration there might be a way to share it. or i think XDA fellow should program a Stack for this issue on activesyns4.x
Internet over Wi-Fi
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Perhaps you are right Acer, since I was not able to fully test it with your specs.
I have a company cable network LAN, and a wireless adapter on the laptop which is free. But unfortunatelly, I was not able to set up internet sharing of the LAN, since it goes over a Network Bridge. Anyone now how this could be enabled?
THanks for the info Acer, its helpful...
Re: Internet over Wi-Fi
acer175 said:
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Click to expand...
Click to collapse
Dude thanx i have a laptop and i have made an ad-hoc network between my pc and the Prophet, also i have shared my dialup connection but it is not working, if possible would you please explain step by step settings?
do you have Windows XP on your laptop?
acer175 said:
do you have Windows XP on your laptop?
Click to expand...
Click to collapse
yes i am using XP home Edition and my laptop is Averatec 3200 series
Just go to properties on your dial up internet sharing and set share this connection. i thinks thats about it. i've not use it for a long time, but if I remember correctly that's about it. you have to share it with your WI-FI adapter of course.
Some WI-Fi card can configure this automacticly. Like several I seen. You can set it as a router, and you're good to go.
BUMP @ acer175 ..where are you dude??!!!
Hi lover. Sorry, I thought Munyuk81's response was enough.
Anyway, on Windows XP, open Network Connections, right-click on your dial-up/ADSL connection, selet Properties.
Open the Advanced tab, you should have an Internet Connection SHaring section. Enable "Allow other users to connect etc, etc...". Select the wireless network adapter if given the option. Click YES if asked to change the IP.
Next create a wi-fi network using the XP utlities or your card's utilities. Don't touch the IP address of the wi-fi card.
Next on your Prophet, enable Wi-Fi and it should discover the network by itself. If you set a key in the step above, it will ask you to enter it.
@acer175
Do you know how i can share my Lan internet which goes over a Network Bridge? WHen I removed the Lan from the Network Bridge, I could see the options for ICS, but there was no internet to share, as the connection was lost. Adding it back to the network bridge restores the internet connection, but removes the option for sharing it with the other (wifi) card...
Anyone?
i haven't tried it myself, but thinking logically, when you add a connection to a bridge, it loses its individual attributes. You have to check the properties of the bridge, and check if there are ICS options there, however I do not think that XP allows that, but you can try.
ALso see if this may be helpful:
http://www.practicallynetworked.com/sharing/xp_ics/
thanx acer175.
i have connected my PPC to PC but still no internet sharing!! also i have shared some drives and folders in my PC but with resco explorer i cant see any of them
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
acer175 said:
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
Click to expand...
Click to collapse
the file sharing works perfectly (thank you\) but no internet conection when i start IE browser it says : The page cannot be found. check the name and try again ?!!!
what is your settings in
Start.Settings.Connections.ConnectionsAdvanced...Select Networks?
both of them are My Work Network
Hi, Ive just got an imate JAMin after a 3 year break from the Pocket PC world and im very impressed but I have a few questions.
1) VPN, how do you actually connect to it? I have enterd all the details to connect to my windows VPN server but as far as I can see the only way to initiate the connection is to tap hold on the VPN in connection manager and select connect. But it also never does anything.
2) Is there any way to select if the wireless uses b or g mode or is it totally automatic? I would like to leave it in b only mode to save power.
3) My setup is as follows. Wireless at home directly connected to the internet, wireless at work on our lan which also offers internet access. I would like to know whats the best way to setup my connections? Should I say my wireless is on the work network or on the internet? I want connections no matter where I am to always use the wifi first and then if it cant connect to use the GPRS connection. The way I have done it is to convigure everything to use my work network and added a GPRS connection to that. so the 'My ISP' option isnt even used any more.
Many Thanks for any assistance you can offer.
I have JASJAM,Vista Home Premium,netgear 108mbps wifi card.
I have made a network b/w mobile and desktop.I view my network files using VM Net Browser,play them using TCPMP player,mp4 codec installed.
Note-All my hard drives are being shared.
Note2-I am sharing my broadband connection i.e local area network on which i have internet.
Problem-
1)I can view all my drives,i.e disk 0,the SATA which is primary drive of my computer(MASTER),BUT i cant view my disk 1,i.e PATA which is Disk 1 on my computer,n guess what,tht drive has all my porn/movies/songs/videos!!
2)I cant get to use internet on my ppc,i think i might know the corrct settings,but i have given default gateway in my ppc same as its in wifi card,in wifi card its same as in lan....192.168.100.1....What else do i have to do.
Please ppl. if u really think u r great then help me!!!Curemy 2 problems
Drive sharing and internet sharing
Hi Pranjal,
I had a problem jumping on to my WiFi to connect to the internet too. I found that the trick that solved it for me was that in Network Management settings [Settings > Connections > Connections > Advanced > Select Networks] to make sure that both options show "My Work Network" and then when you try and connect to the WiFi network select the this Network connect to my work option.
That should *fingers crossed* sort out your internet problem.
Though I haven't a clue about your drive sharing problem. Though I'm guessing as you should then be able to log on to your WiFi properly you should have access to your shares.
HippiHippo
Security
Hi,
Just read your post, and I just wanted to make a mention on security.
You really should think about using a router on your network instead of having a PTP (Point to Point) wireless network. If you use a Wireless Router, you can use a MAC security list which prevents devices other than those you specify connecting to the network.
At the same time, you shouldn't be openly sharing all of our drives like that, especially your system volume with your Windows installation on it. My advice would be to unshare the drives, and connect to them via the Administrative Shares (c$, d$ etc). These shares are hidden from the network browser, and can only be opened by Administrative user accounts on the PC.
By having all your volumes shared like that, and a simple P2P wireless network, someone could very easily brute force the WEP / WPA key being used by your WLAN card, and then freely browse everthing on your PC, injecting like nasties wherever they feel like doing so.
Hi,
I don't think this is currently possible but I do not see any reason why? Does anyone know if there is a 3rd party app to provide this?
Thanks,
Phillip
Possible ! (Well somewhat)
This is very much possible. I got it working as follows :
(1) Create a WiFi connection on Pocket Pc with ad-hoc feature and Open Security, make sure you select "Work" as the connection.
(2) Give the WiFi adapter on Pocket PC an internal address similar to 192.168.0.2 (255.255.255.0)
(3) On your PC/Laptop set WiFi adapter IP to 192.168.0.1 (255.255.255.0)
(4) You need a program like Pocket PC Proxy to be installed on the Pocket PC.
(5) Enable proxy settings on Laptop as 192.168.0.2:80 (or the port set on the proxy prog on ppc)
(6) Enable WiFi on ppc
And Voila ! You can browse internet using the connection on your ppc.
Hi,
Thanks, I will give this a try. However, I can't seem to find this piece of software (Pocket PC Proxy). Can you point me in the right direction?
Thanks
Here you go...
Thanks for the download, I'm using an HTC Touch (Elf) with WM6. I can't seem to figure out how to create an ad-hoc wifi connection?
(Sorry to be a pain but i think that this will benefit others too!)
Ahaa, I managed to figure out how to create an adhoc network on the Pocket PC, I assigned it the correct IP (as above) and basically followed the instructions.
I'm actually trying to get my iPod Touch to connect to the net via the HTC Touch.
I iPod sees the wifi connection and connects perfectly, I can even assign the ip and subnet mask. However, I simply can not connect to the internet either with or without the proxy. Any suggestions on what I am missing?
THanks
What kind of an internet connection do you have on the ppc ?
- GPRS/EDGE ? Is it always connected/on ?
Got it working, you can ignore the following
Thanks!
------
Hi, here is everything I have done:
Connections, Internet
Modem: T-Mobile Internet, GPRS (UK, no edge)
Proxy Settings: This network connects to the internet
This network uses a proxy server to conncet to the internet
149.254.291.132
(This was all set by the phone when I switched it on)
My Work Connection:
Nothing set up here
WIFI
Add New...
Network Name: test
Connects to: Work
This is a device-to-device (ad-hoc) connection
Authentication: Open
Data Encryption: Disabled
This seems to create an ad-hoc connection and sits there with 'Connecting' until another device connects to it.
Network Adapters
My network card connects to: Work
IEEE 802.11b/g Compatible WIFI....
Edit:
Use specific IP address:
192.168.0.2
255.255.255.0
(Everything else blank)
Wireless LAN
SSID: test
Mode: 802.11 Ad hoc
Channel: 11
When I connect two devices together the IP shown under advanced seems to read 192.168.0.21 (I think this should end .2 so not sure why it isn't)
If I connect my laptop I can 'ping' 192.168.0.2 and that works but both my laptop and ipod touch do not seem to be able to connect to the internet.
On the ipod touch I simply get 'Server not found' or something similar.
(I have remembered to run PocketPCProxy)
Yes, the GPRS is connected whenever I run PocketPCProxy.
I would really appreciate any help you can give, I really like using the browser on my ipod Touch but don't really want to go the whole hog and buy an iPhone because it is so tied down and restricted.
Thanks,
Phillip
I don't know what I have done but suddenly it works, now it comes up and shows the correct ip on my pocket pc.
Anyway, thanks for your help!
Hi everyone,
I have been trying to ad-hoc connect my PC (Lenovo X60s with XPSP2) to HTC Touch via WiFi to be able to share files and stream music.
It did connect and pinged ok, however the two just refuse to see one another on their networks.
Does anyone have any successful experience trying for the same?
Regards,
Madana
I tried this between my TyTN and TyTN II, the latter being the gateway, but the TyTN insists on still using GPRS for its internet instead of the wifi. Very annoying, and it's runing WM5 so (i dont think) you can't turn of the GPRS like you can with WM6.
Does anyone know how to make it use wifi, and wifi only for internet?
Thanks,
Sebastian
i have installed pocket pc proxy after a file called ......ppc3.arm.cab (i don't remember how it begins) but it doesn't work... any idea?
same here the pocket pc proxy when i run shows a fatal error in running it.
what should we do??
Hello,
I have samsung c6712 with wifi connected with internet near internet company with router as it is free for me, setting and pasaword is setted by those guys on my phone but they didnot give me their password and settings.
i like to run/use internet on my pc (xp32) with cable connection. How can I use that
[email protected]