Related
Today I had this problem for the 2nd time. My Qtek 2020 was in my bag and the phone button got pressed, calling my friend for 51:18 minutes!! How do I prevent this from happening?
There are (at a minimum) two ways of doing this.
1. Start -> Settings -> System -> Button Lock -> "Lock all buttons except Power button" -> OK
2. Place the device in a case (I use the Seidio hard plastic XDA case) while not in use to prevent inadvertent button-press.
2 is easiest, but 1 is pretty much guaranteed to work.
the case
I received a leather snap-case with the device. I believe the inadvertent press of the button (or tap of the screen) may have happened while I was using the device (CALENDAR, TASKS, etc.), although I don't know how. I do know that when I press the green talk button to switch over to the phone, it seems very easy to press it twice and redial the previous number.
As for button lock, how does that affect my ability to answer the phone when it rings?
Button lock does not affect your ability to take a phonecall.
The phone turns on when you get a call, then you can simply press the green button.
I am still wondering why button lock is not activted by default...
I've put my phone in my pocket before, and then found it to have powered itself back on almost straight after being powered off. Then, in my pocket alongside the Jabra and the wired hands-free, I get all sorts of wierd scrawled notes & stuff. I had a new Task yesterday, and at one time my Personal Details had a load of gibberish written all over the place.
The Faux-leather thing the XDA2 came with just seems too bulky to me.
Best bet is to power it 'off,' leave it on the side for a minute and power it 'off' again if it wakes up on its own. And, if you leave it in a bag, check for messages/missed calls when you get back. And make sure to turn it off even after a call you don't pick up.
Hi Guys.
I had a quick search for this but other than posts about the button lock "when off" thing, which I have enabled, I can't find a fix for this, what I consider to be, bug/fault/failing.
The thing which really really gripes with me is the dumb buttons all around the edges of the Universal. Sure, when the phone is off, they are disabled, but what about when the phone rings ?
I grab the phone but have to try to dance around any and all buttons because as soon as it gets a call it wakes and the buttons become live.
I've had to forget having the phone in it's case (I tried a krussell case for it but it stresses the screen hinge) because you have to wail away on the keys in order to get the thing out the case.
I could assign the functions of the buttons to <none> but it kinda negates them even being there.
A way to disable them when off and also on call receipt would be just the ticket.
gee, I really hate this aspect and if I lose another call I swear I'll throw it out the window.
I dont really understand your concerns.
I use button lock, and they do lock without a problem.
When my phone rings, the phone call buttons are active to accept or decline.
I also use the krussel case and didnt find any hinge stress, and had easy access to the answer and hangup buttons located on the hinge. mind use, i usually keep the clam closed so i had not problem accessing any of the buttons, ever.
I have also extended the ring time from the 10second default to the 30 second maximum available, so I am not in any rush to answer the phone in the first place, and dont need to visually see who is calling as I accept all incoming calls, or decline all incoming despite who it is. so simply pressing the green button located on the hinge is easy.
so alas, I dont understand your problem.
But when your phone rings, the other external buttons are also active, camera etc. So, when dragging the phone out of a pocket or it's case, you are almost bound to catch one of those butons or, as has happened, the Red call-end button on the side.
marcuskeeler said:
But when your phone rings, the other external buttons are also active, camera etc. So, when dragging the phone out of a pocket or it's case, you are almost bound to catch one of those butons or, as has happened, the Red call-end button on the side.
Click to expand...
Click to collapse
I tested this on mine and whilst you are right about the buttons being active, the phone answer/ignore window stayed foremost regardless. In my case i tested a button I have assigned to notes and the notes window appeared underneath the call window.
As with previous comments I really don't see the issue as anything more than trivial, especially considering the buttons size and pressure required to activate it. Perhaps someone will (or has) write a little utility to disable the buttons except for the phone answer/ignore. In the meantime I wouldn't worry about it.
Using a SPV M5000 and keep it in the leather/elastic holster provided with the phone, and have the same problem with loosing calls whilst extracting the phone from the holster. My rings before going to answer service is set at 30 secs, and that makes no difference.
Just need to find a decent case which doesn't interfere with any of the buttons.
sipat said:
Using a SPV M5000 and keep it in the leather/elastic holster provided with the phone, and have the same problem with loosing calls whilst extracting the phone from the holster. My rings before going to answer service is set at 30 secs, and that makes no difference.
Just need to find a decent case which doesn't interfere with any of the buttons.
Click to expand...
Click to collapse
You could try this case. I loved my previous xda2 case and this is the closest I could get with a belt clip. Phone rings, I unclip, check the green (middle) phone button, press and answer. Finish and press red (end) phone button and reclip.
BTW I'm not at all related to the vendor.
Gday TyTN folk.
I have an iMate PDA2k and am thinking of moving to TyTN, but being a bit frustrated with my current unit I'd like to know whether TyTN makes a better phone than BA does.
My specific botherments are:
- notification light (green/red/orange) where the functions over-ride each other. e.g. if I miss a call while its charging, it starts flashing red, but then it completes charging and goes green. Actually, even if it's not charging it seems to stop flashing red after a while. I want it to keep flashing red until I actually handle the device and should have noticed.
To me it makes more sense to combine the bluetooth light with the charge light, and leave the phone notification as a separate item.
- notification icon space in start bar. Currently it's ALWAYS showing a multi-message bubble icon (I'm always in CDMA 1x coverage, and also have an app running that puts its own notification icon up) so I don't see a new one for SMS or voice message. It looks like the best answer might actually be a 3rd party start-bar app, but still.. is it any better under WM5?
- waking up. Incoming calls, messages, and bluetooth connections, wake up the device completely. If it's in the pouch, or worse, in my pocket, the screen then gets bumped, thereby performing actions I don't want to. Even getting it out of my pocket without bumping the screen is a challenge. I tried setting an unlock password (some time ago) but that wasn't satisfactory; I don't remember whether the screen still unlocked on incoming calls, or if unlocking was too much a nuisance.
Ideally, it should wake up enough so that the firm hardware buttons are unlocked but the screen isn't active until you've used a button.
The voice-recording button used to annoy me with accidental presses when removing from pouch; I changed that button to do screen rotate which I find more useful, and no big deal when pushed accidentally - just push it again.
- Sound quality, especially for the person on the other end of a call. I've had people tell me I'm faint on the iMate. Positioning is a little interesting as I don't really want to rub my face all over the screen. Does the TyTN pick up any better?
- turning the phone off. (Like Windows' contradictory "click start to shut down") I really don't like the fiddly actions required to "turn on flight mode" on pda2k, especially when I don't want to get out the stylus. People with normal mobile phones can turn them completely off using one hardware button, and they don't have to look hard to see whether it's on or off. Some have mentioned wanting an easy way to switch to/from silent mode.
Is there a quick, sensible, easy way to turn the phone on and off, preferably also to/from silent?
Thanks
gregnash said:
- notification icon space in start bar. Currently it's ALWAYS showing a multi-message bubble icon (I'm always in CDMA 1x coverage, and also have an app running that puts its own notification icon up) so I don't see a new one for SMS or voice message. It looks like the best answer might actually be a 3rd party start-bar app, but still.. is it any better under WM5?
Click to expand...
Click to collapse
First a corresponding icon (envelope, phone), after more notifications, you get a bubble (?). Not a bubble all the time.
gregnash said:
- turning the phone off. (Like Windows' contradictory "click start to shut down") I really don't like the fiddly actions required to "turn on flight mode" on pda2k, especially when I don't want to get out the stylus. People with normal mobile phones can turn them completely off using one hardware button, and they don't have to look hard to see whether it's on or off. Some have mentioned wanting an easy way to switch to/from silent mode.
Is there a quick, sensible, easy way to turn the phone on and off, preferably also to/from silent?
Click to expand...
Click to collapse
One hardware button for standby, hold it to turn the device off completely. You get a window where you can just hit the d-pad button.
There's also a button for comm-manager, there you can select silent/vibrate mode and flight mode.
Hi, you speak of not wanting to rub your face on the screen, I actually use my TyTN in speaker phone mode to prevent this, I just quickly enable speaker on a call, and flip the phone to where the back is by my face, it puts the speaker in a good spot also, I know it sounds a bit weird, bit works pretty well.
Granted I don't do this with every call, mostly I use it when I know the call is gonna last for more than a few minutes.
notifications, buttons
TiMMah!!! said:
First a corresponding icon (envelope, phone), after more notifications, you get a bubble (?). Not a bubble all the time.
One hardware button for standby, hold it to turn the device off completely. You get a window where you can just hit the d-pad button.
There's also a button for comm-manager, there you can select silent/vibrate mode and flight mode.
Click to expand...
Click to collapse
You're right about the notification icon, but if I was watching the screen at the time of the additional notify then I'd already know what's there and wouldn't need the icon. On the pda2k cdma, being in a 1x coverage area generates a notification, plus mNotes puts one, so there's a bubble even before I receive any sms, voicemail etc. Combine that with the behaviour of the flashing light, it means if I missed something I may not know about it unless I go looking.
Thanks re the hardware button, that's good news.
face-rubbing
ChaoticDruid said:
Hi, you speak of not wanting to rub your face on the screen, I actually use my TyTN in speaker phone mode to prevent this, I just quickly enable speaker on a call, and flip the phone to where the back is by my face, it puts the speaker in a good spot also, I know it sounds a bit weird, bit works pretty well.
Granted I don't do this with every call, mostly I use it when I know the call is gonna last for more than a few minutes.
Click to expand...
Click to collapse
Creative! I'll remember that one..
Sounds like you should check out PhoneAlarm
I use my 8525 in a side case and when the phone rings I usually pull out the phone to see who's calling to decide if i want to answer... though 9 out of 10 times i accidentally hit the answer button. I always lock my phone via device lock on today screen... is there a reg hack or setting which will allow me to disable or customize ALL the buttons (when in lock mode) on the 8525 so I don't accidentally answer. to me if i were to assign a button (ie power or ptt) to only be allowed to accept a call (when the phone is in lock mode) that'd be great. I'm tired of auto answering and what good does a device lock do if you can easily auto answer?
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
abricko said:
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
Click to expand...
Click to collapse
Sorry you're not getting replies and I have no solution of the type you are looking for sadly. I've tried to replicate what you say happens but it's not easy!!! My key is not that easily pressed and I always put the device back with screen towards my body - my fingers don't seem to get very close to the green button.
This is probably daft to suggest but have you checked the setting that lets you specify auto answer within X number of rings - just in case it's answering the call by itself!!. (apologies if you checked this setting already!!)
Mike
This may do what you want...
http://www.pocketmax.net/smf/index.php?PHPSESSID=da5459e6aadc9c38d5a74b0276782091&board=19.0
Auto Answer is not set... the problem is (and it's a problem with the phone design) when the phone is locked none of the buttons respond until you hit the power button and then unlock the phone via the screen (which is good).
However when there is an incoming call or reminder the screen turns on and then a few buttons are active on the phone (send, end and the two soft keys seem to be). So when a phone call comes in, if the phone is in your pocket or the hip case while reaching for the phone it's VERY easy to accidentally press any of the active buttons and then accidentally accept or reject that call.
I've searched everywhere I can think of and I find little mention of this problem and no mention of a fix, most screen lock replacements only do as much locking as the WM5 built in lock does. The button re-activation after an incoming call is probably something built into the hardware. That's all I can deduce from this.
Thanks for the responses I've received so far.
I am on my fourth PDA phone and have used both Win Mobile 2003 and WM5. They all behaved this way and it is one of my biggest complaints with the Windows OS. I have seen apps for Palm that solve the problem. How hard could it be to have the option to only wake with the press of the power button?!
not hard at all, but the again its M$, i am surprised these devices to have ctrl-alt-del keys.
Hi there,
I am a little ticked off with the way the phone switches the light off and you HAVE to press a button to get it back up when in the middle of a call.
Is there any way to keep the phone awake while on a call? Ofcourse, I HAVE tried out "Shake Awake", but thats a little buggy too.
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button. Is there any alternate dialler available or something which can get all these options on the screen while on the call like the iPhone as its easier to use it than press the button to get the options?
just install keepscreen.
edit: this will keep the screen alive. about the alternative dialer i don't know. but be aware that the phone has no proximity sensor, so you are prone to accidentally press random buttons.
Cool. Will check it out man. Thanks.
I have a different problem - since, sadly, Hero has not got a proximity sensor, I constantly drop my calls by accidently touching the end call button with my cheek. I believe that's a reason the screen backlight goes off so quickly during a call - when the screen is off, it does not react to touch too, so that accident call drops would be less likely.
There are still some serious problems though. First of all, screen timeout during a call is not short nough - while you can know that you must wait a few seconds before you can actually touch the phone with the face, others can't, so call drops are, sadly, unavoidable in such cases. The fact that hold, mute and other buttons are hidden under the menu button is a good thing not only because it keeps Android phillosophy straight, but reduces chances of unwanted misc. actions. The solution of this problem could be an option to disable the end call button, since there are dedicated hardware keys for that.
I have also noticed that if you minimize the dialer during a call with home button, the screen timeout will not be quick, so before continuing a call it's a good idea to bring the dialer back by tapping the hardware call button so the screen timeout becomes quiick again.
Very true. I thought about all these before I posted, but on the other end, I just said 'f it' to myself and asked it here.. hehe.
I wonder if iPhone users have such issues.
As someone in this forum mentioned, it is best to have the screen switched OFF during a call, unless you have something to do. This way, it prevents you from fiddling with the controls.
Not just the hero, earlier models too have this feature. It quite odd in the beginning, but you will love it later.
subhramani said:
Hi there,
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button.
Click to expand...
Click to collapse
Not necessary!
During a call
- Press "Call" to hold (will also mute)
- Press and hold "Call" to activate speaker mode.