Related
Hi people.
I have an ImateJam PM10A that i require help with.
On boot up i notice it says "no GSM" D.1.12.00 WWE
The sys info i get from device information is:
ROM Version 1.12.00 WWE
ROM Date 05/28/05
Radio version BLANK
Ext rom version 1.12.119 WWE
As a result no GSM whatsoever.
Hope you guys can help me ?
Kind regards,
Mitch.
did you do anything to your jam before this happened? i dont know too much about this stuff but i would say reinstall the rom, heres what clubimate has to say about pm10a rom upgrades:
If the model number indicates PM10A, then the customer should upgrade with the Generic Worldwide English ROM Build. You will not be able to install the North American JAM (850) ROM. This WWE build does not include the connection settings for the US operators found in the North American build, though these are all available to download separately from club i-mate™.
Hi..
Ur r seeing no GSM on boot because radio is missing,meaning no phone,just the PDA...
U just have to reflash radio,and for doing that:
go to the ftp from here,download MAupgradeUt_noID.exe,and a radio ROM of ur liking(1.12 is preferable,it is radio_.nbf file),put the 2 files in 1 folder,remember to also put RUU.dll in it,enter ur phone in bootloader mode by pressing power button,camera and reset(i guess,it's been a while since I have'nt reflashed a Magician :wink:,anyway make sure by reading the wiki page from here),then run MAupgradeUt_noID.exe,and follow on screen procedures...
Good luck...
RAGO :lol:
Tried an upgrade to the latest UK wwe full image using MAupgradeUt_noID.exe and also the latest radio rom.
whilst the upgrades complete ok the radio version and protocol version still remain blank??
any ideas on what the generic world wide flash file is called and i will give it a go.
mitchtech said:
Hi people.
I have an ImateJam PM10A that i require help with.
On boot up i notice it says "no GSM" D.1.12.00 WWE
The sys info i get from device information is:
ROM Version 1.12.00 WWE
ROM Date 05/28/05
Radio version BLANK
Ext rom version 1.12.119 WWE
As a result no GSM whatsoever.
Hope you guys can help me ?
Kind regards,
Mitch.
Click to expand...
Click to collapse
Hi, what happen ur imatejam before, In my experience, last time due to I updated the the firmware via SD method, finally after boot same as ur metioned situation. I bring it to service center, service cneter said that is mainboard problem, and they replaced a new mainboard for my O2 mini(imatejam) and upgrade the boot loader to v1.02. Try bring it to service centre to checking it.
Regards,
mmgrilmm
need a shipped ROM for a MDA Compact PM10A, T-Mobile, english
guys, please help me with this, it's urgent for me! if you have it, put it on ftp://ftp.xda-developers.com/Magician/Shipped_ROMS
Thanx!
I attach the relevant files of the rom update utility for the HTC galaxy (Dopod p100). I appreciate help from those who already did work on "NO-ID" upgrades before... currently I would like to update a chinese machine with English rom. The attached brings the machine to bootloader but after few seconds stops and reports Invalid vendor...
I appreciate any help.
P.S. the complete image rom is in the FTP under upload/Dopod p100
Just received my Qtek G100, we need a new forum ;-)
I'm seeing some interesting stuff in the DopodP100 directory, including an ENG ROM, have you tried it ?
My ROM is ENG 1.00.06 ENG - no BT Headset profile :-(
Just received my Qtek G100, we need a new forum ;-)
I'm seeing some interesting stuff in the DopodP100 directory, including an ENG ROM, have you tried it ?
My ROM is ENG 1.00.06 ENG - no BT Headset profile :-(
Hi,
Do u still have the english rom?? Can u upload to the FTP site again?
Same problem Here
Have a P100 with chinese rom and have been looking for an english version for some time now, was able to find a Qtek G100 english rom, but it would give me a invalid ID message. Please, this is becoming a common problem..
ftp.clubimate.com
yep, thanks
already upgraded to Arabic rom
wardy said:
ftp.clubimate.com
Click to expand...
Click to collapse
Wardy have u got a dopod 818 pro or jammin?....As i have a jammin and was thinking of installing the dopod rom.....Have u tried both roms?
If so which do you think is the better of the 2?
Thanks
Can I use the file to upgrade my Dopod 818 Pro? Has anyone tried it?
linux2001 said:
Can I use the file to upgrade my Dopod 818 Pro? Has anyone tried it?
Click to expand...
Click to collapse
Yes, you can do that but your 818Pro will have European/Australian GSM settings instead of Asian. You need to flash the DopodAsia Extended_rom if you want those Asian settings.
I am in Australia currently, and bought my Dopod in Singapore. I am currently facing the Sleep-To-Death (STD) problem on my Dopod so I am wondering if I should try the imate ROM...
Imate Jamin rom on Dopod 818-Pro (Hong-Kong)
I tried flashing my 818-pro with the Jamin Rom... stoped after 95% (assuming when validating the device ID) and informed that the rom is not for my device... left the 818-pro dead!. My only way to recover was, to flash with MDA compact rom to bring it live again and than load through awizard the 818-pro WWE version from this FTP.
Conclusions:
1. Imate decided to disable an incorrect device???? (perhaps un-intentially).. therefore avoid using the Imate RRU utility.
2. flash NBA through the Awizard utility.
Question how to separate the Extended Rom from the NK.NBA provided ???
Re: Imate Jamin rom on Dopod 818-Pro (Hong-Kong)
Dubi said:
1. Imate decided to disable an incorrect device???? (perhaps un-intentially).. therefore avoid using the Imate RRU utility.
Click to expand...
Click to collapse
I don't think so. I have successfully flashed my Dopod 818Pro with Imate JAMin. However, I flashed it back to DopodAsia ROM because it's not a newer ROM.
linux2001 said:
I am in Australia currently, and bought my Dopod in Singapore. I am currently facing the Sleep-To-Death (STD) problem on my Dopod so I am wondering if I should try the imate ROM...
Click to expand...
Click to collapse
If you still can get your Dopod to the Bootloader mode, you may try to flash it with this Imate ROM. Better than STD I guess. Good luck!
(To get it to Bootloader, press Camera button and reset the unit. Holding the camera button until you see four color bars. Insert USB connector and run the ROM file.)
Khuanchai said:
If you still can get your Dopod to the Bootloader mode, you may try to flash it with this Imate ROM. Better than STD I guess. Good luck!
(To get it to Bootloader, press Camera button and reset the unit. Holding the camera button until you see four color bars. Insert USB connector and run the ROM file.)
Click to expand...
Click to collapse
Thanks for the advice Khuanchai, I might want to try this out, but am worried about getting a failed flash like in Dubi's case. It will be difficult for me to send my 818Pro for repair as there are no Dopod service centres here in Australia.
Do I need to take special precautions before running the update, such as applying the unlock CID option using the aWizard tool?
linux2001 said:
Thanks for the advice Khuanchai, I might want to try this out, but am worried about getting a failed flash like in Dubi's case. It will be difficult for me to send my 818Pro for repair as there are no Dopod service centres here in Australia.
Do I need to take special precautions before running the update, such as applying the unlock CID option using the aWizard tool?
Click to expand...
Click to collapse
Not sure you need to unlock CID in order to flash a new ROM only but it's a must if you want to backup your Dopod ROM. I have done this to backup my Dopod ROM that can be flashed back whenever I want.
I think Dubi has failed because of incomplete downloaded file.
There is a very good information for flashing Dopod 818Pro with Imate ROM at PDAMobiz.com:
http://www.pdamobiz.com/show_news.asp?NewsID=52433&PN=1
Unfortunately, this is in Thai but it's easy to follow if you have some experience on flashing ROM.
Failed to flash Imate rom on Dopod 818
Thanks for the remarks.... however... My phone has been originally Chinese and I loaded the 818pro rom wwe avaiable here on the FTP> however by mistake I flashed it before with an MDA compac rom which installed a wierd Extended Rom which I can't get rid of, unleass I have a good "ship" version. Tried few time to flash the Imate Jamin rom and it quited after 95%. I am currently using the Imate version.. dated Jan 9th. which I was able to finalize with lot's of tricks such as complete the RRU by lading just a radio version.... I think (just feeling) that the Dopod818 pro wwe is better.... however in order to resolve my complete issues and to let you know if it fialed (95%) becuase of Imate or becasue of a strange Extendedrom that I have I need to have access to a "SHIP" WWE Asia version. Placed a request here on the Board but so far no one Uploaded it... Yet.
I can ensure you that My phone is CID unlocked etc. etc.... Tried some RRUs but None could identify the Imate nk.nba rom., while the original RRU of imate failes on 95%.. keep anouncing that the rom is not for me???!!!
Please if one of you have access to the Asia Dopod site please upload a complete "ship" version (English please).
Re: Failed to flash Imate rom on Dopod 818
Dubi said:
I need to have access to a "SHIP" WWE Asia version. Placed a request here on the Board but so far no one Uploaded it... Yet.
I can ensure you that My phone is CID unlocked etc. etc.... Tried some RRUs but None could identify the Imate nk.nba rom., while the original RRU of imate failes on 95%.. keep anouncing that the rom is not for me???!!!
Please if one of you have access to the Asia Dopod site please upload a complete "ship" version (English please).
Click to expand...
Click to collapse
I have backed up my Dopod 818Pro's original ROM (English version) to a BIN file that needs to write to an SD card before flashing the unit. If you want to try, please find a place that I could upload to.
Dopod 818pro dumped file...
Dear Khuanchai please upload it here to uload\818pro....
or just attach a file as a reply to this message... I read the threads of 818pro and I am sure that others could make use of it.... It is very usefull to other users as well.
Thanks you
Does the Jamin's ROM come with A2DP?
http://www.imate.com/t-DETAILS_JAMIN.aspx
Re: Dopod 818pro dumped file...
Dubi said:
Dear Khuanchai please upload it here to uload\818pro....
or just attach a file as a reply to this message... I read the threads of 818pro and I am sure that others could make use of it.... It is very usefull to other users as well.
Thanks you
Click to expand...
Click to collapse
Here is the original Dopod 818Pro ROM (WWE) with instructions. I had difficulty uploading file but finally finished. Let me know if you find the file incomplete.
Cannot attached file but here is the link:
ftp://xda:[email protected]/Uploads/DopodAsia.zip
818Pro bin file.... Corrupted...
Thanks for the efforts, however the zip file is corrupted.... I tried dnload it 3 times, the same file and zip is corrupted... I suggeste please verify that indeed your original file integrity is ok and upload it again. The best is just to attach the file to your message (if you have difficulties to use the ftp...).
Thank you..
does this rom support a2dp...??
kinson said:
does this rom support a2dp...??
Click to expand...
Click to collapse
No, it doesn't.
I tried to load the german wm6 os.nba another poster provided (using the aWizard tools, which I had previously sucessfully used to load the WWE HTC rom on my Chinese Dopod 858), and currently the device just sits at the logo screen.
I can enter the bootloader, and I can even use the 'official rom updaters' while in the bootloader, unfortunately they all fail at 2% saying 'invalid device id'.
Any advice on how to get my phone running again?
I think if I could find a chinese dopod 858 updater, I could use that to load a proper OS onto the rom, but I can't find one anywhere.
Another option would be to 'more completely' unlock the cid, then I could use the HTC updater... but all the cid unlockers seem to require a working active-sync connection, which I certainly cannot provide from the bootloader screen.
Again, reaching out to the more experienced here to help on this.
thanks
Did you check on www.dopodasia.com for your phone's original ROM updater? Dopod always has the latest ones they've released for each model on their site...
From the other Herald thread (http://forum.xda-developers.com/showthread.php?t=290382), I read that the extracted WM6 German OS.nba was corrupted due to some error in the extraction process. Papamopps has promised to post the OS.nba again, hopefully soon so you could maybe try to flash that version too.
P.S Aiyo? What language is that?
I tried, I'm not able to get an account to their site. When I enter my serial number, I always get an error.
(http://www.dopodasia.com/Dopod_en/member/check.aspx)
Oh, and 'aiyo' is mandarin chinese pinyin for doh, embarrasment, frustration... that sort of thing
Sorry can you tell me where to Download original HTC Updates ?
My Update did not work out, too and i am stuck in Bootloader by now....
i think i can flash the WWE, will try this now !
Here the lastest ship ROM, but I'm not sure you can UP without unlock CID:
http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
mkford said:
Here the lastest ship ROM, but I'm not sure you can UP without unlock CID:
http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Click to expand...
Click to collapse
It wm5 aku3.2. Where to take wm6 wwe?
SOrry - there is no WM6 WWE.
I made a backup with awizard to dump the german ROM of XDA terra (aka herald) - But it was only read from 0 to 58000 - I figured it out - that the os.nba is not completly.
So I deleted the links I provided.
SORRY.
Hope it will work again.
Thanks for the replies, but I think the only updates that will pass the cid lock would be an official update for that phone... specifically, a Dopod C858 sold in mainland China... (ugh). I still haven't found an appropriate updater.
I have a DOPOD C800 with the following specs:
ROM version: 1.7.707.3 WWE
ROM date: 11/01/06
Radio Version: 02.69.90
Protocol Version: 4.1.13.30
ExtROM Version: 1.7.707.106
Operating system: windows mobile 5.0 - OS 5.1.422
Can someone please help me with steps to upgrade it to windows mobile 6/6.1?
I checked on the dopod official site and the upgrade is not available for c800.
So will i have to unlock CID? am basically confused.....can someone help with the steps please?
Thanks in advance.
what is your SPL? If it is over 4, you should HardSPL your phone and flash one of our custom roms, or use the USPL to do it.
Welcome to xda-devs. make sure you do all your research before trying anything.
Try the HTC site
Try the HTC site ...
--The HTC site does not have a official ROM for the Asian Dopod c800.
what is your SPL? If it is over 4, you should HardSPL your phone and flash one of our custom roms, or use the USPL to do it.
-- my SPL is 1.09.0001
it looks like you are stuck with the rom that you have. Try using aserg's method. it's one of our older flashing methods.
search for it in our forums. tip for you- ALWAYS have RUU ready.
Can u pls tell me what the aeserg's method is? and what do u mean by having the RUU always ready? and which RUU are u talking about? I don't think there is a RUU for the DOPOD C800. If there is then pls let me know where it is.
thanks.
--The HTC site does not have a official ROM for the Asian Dopod c800.
I think they should be the same, but only try if you're really desperate to get WM6. I put the htc wm6 (in english) on my htc branded version bought in China with a chinese version of wm5.
czhang- you can buy HTC devices in china. but you can also buy dopod devices. Even if dopod is essentially HTC in china. the RUUs do not work together.
Rangnekarrahul: aserg's method is a way that we were able to flash the first roms made for the herald, before we had USPL and HardSPL. I'm pretty sure you don't have to have a 4+ SPL to do it, but the lack of RUU means that if you mess up, your device is dead.
for more info on aserg's method, look at some of our oldest roms, like touch-it 1 or 2.
do u really think its worth the effort? also can u tell me the actual method(aserg's) I tried finding in the forums but am not really very sure. Some talked about extracting the .nbh file and stuff.....don't know how to do it...if writing in this forum is a pain then u can mail me the procedure at [email protected] .
thanks
I had successfully upgraded my dopod c800 following instructions. Please see my earlier post
regards
I had successfully upgraded my dopod c800 following instructions. Please see my earlier post
---- buddy I will definitely try this. Can you pls let me know where can I find the Official RUU -HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.e xe
?
Thanks again for the help
Thanks for the help guys..... I have upgraded my C800 successfully.....works great now.....