Related
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
!!DEPRECATED!! USE THIS INSTEAD: http://forum.xda-developers.com/smartwatch/other-smartwatches/rom-cm-12-1-hexxa-atenea-clones-t3488590
Hi Guys!
Here you will find my CyanogenMod 12.1 (Android 5.1.1) Rom for the Hexxa Atenea (Mediatek MT6572 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Source Build, so it will NOT be supported by the CyanogenMod Team
THIS IS ONLY FOR EXPERIENCED USERS THAT KNOW HOW TO FLASH A MEDIATEK DEVICE USING FLASH TOOLS. I WILL NOT ANSWER ANY QUESTION REGARDING HOW TO FLASH, HOW TO INSTALL DRIVERS, OR ANYTHING NOT RELATED WITH INTERNAL ROM USAGE!!! I prefer spend my few spare time fixing things that answering things that are already answered in XDA or Google.
This rom is based in Hexxa Atenea official ROM, but with some modifications:
Data size is now 2.4Gb and sdcard is emulated inside data partition. Now you have +2Gb to install apps. But if you do wipe, the "sdcard" is deleted too, so be careful of what do you store there.
The Launcher is the ClockSkin (thanks @riktop) app modified with an app list, so it's a fully working skin manager with an app launcher.
It also work without any issues on the clones (mt6572):
- No1 D5
- Other clones
CyanogenMod 12.1 Status:
Working:
- RIL: Telephony (Calls / etc) (2G and 3G)
- ART
- Sensors
- Sound
- Bluetooth
- Wifi
- Microphone (For Calls and in some apps)
- Data connection
- CyanogenMod related features (Theme Manager, etc ... )
- GPS and aGPS
Not Working / Needs Improvements :
- Heart Rate sensor
- Maybe others
Flash Instructions:
Backup, Backup, Backup ... Use MtkDroidTools for backup (http://forum.xda-developers.com/showthread.php?t=2730031)
Flash the image with Flashtools (http://forum.xda-developers.com/showthread.php?t=2730031)
To enter flashtool mode, shutdown the device before put it in the base. Search Internet for more info.
To flash select Firmware Upgrade or your data partition will not change. If you finish and data has +- 630Mb, reflash using Firmware Upgrade.
Recovery instructions:
Use your stock flastool image to restore the smartwatch.
GPL Compliance:
Device: https://github.com/corvusmod/device_hexxa_atenea
Vendor : https://github.com/corvusmod/vendor_hexxa_atenea
Credits:
CyanogenMod Team
MediatekAndroidDevelopers (fire855, ferhung and the rest of the team)
Moyster
BlueFlame4
People at CM for Mediatek thread (http://forum.xda-developers.com/showthread.php?t=2274332)
XDA:DevDB Information
[ROM][UNOFFICIAL] CM 12.1 [5.1.1] Hexxa Atenea [MT6572] and Clones [SMARTWATCH], ROM for the Smart Watches
Contributors
corvus, blerfont
ROM OS Version: 5.1.x Lollipop
Based On: cm12.1
Version Information
Status: Beta
Created 2016-10-14
Last Updated 2016-10-27
Reserved
Some screenshots:
https://photos.google.com/share/AF1...?key=ai1qLXA4eVQ1cW5hcFJXSmZDc3BrQ3pTTDlVS2x3
Video of how emulate back and menu button with power button:
https://photos.google.com/photo/AF1QipMIn1ydlqzGPQGNCsU5RX_1j_PL2B613mExJ0U_
In these screenshots you can see default launcher. Now, it uses a custom launcher with the clockskin app, so no default launcher anymore.
Reserved
Very promising ROM with clockskin, pedometer. Still needs some customization for round screens but the ROM is in dev so it will come soon.
Can be tested without issue on your D5.
Hello and congratulations on your hard work! Will this rom work on my finow X3?
eptesicus13 said:
Hello and congratulations on your hard work! Will this rom work on my finow X3?
Click to expand...
Click to collapse
Not X3+ but regular dual core X3 - yes.
@corvus - great work mate !!
Thanks for the rom.
WARNING - to all. As corvus said - BACKUP !! Especially your NVRAM / IMEI with Droid Tools. Uisng the Upgrade option in SP Flashtool has a habit of taking out your IMEI number.
We should try to make it applicable to the plus series of watches as well - now that so many are buying them.
I will see what we can do over on the http://roundandroidwatches.proboards.com/ to help with that.
Also the larger screen X5 and Q3 (mtk 6572) series would be great with this. I think that the build.prop just has inverted screen set in ro.softwarerotation=180 - and probably in the boot image as well.
pablo11 said:
Not X3+ but regular dual core X3 - yes.
@corvus - great work mate !!
Thanks for the rom.
WARNING - to all. As corvus said - BACKUP !! Especially your NVRAM / IMEI with Droid Tools. Uisng the Upgrade option in SP Flashtool has a habit of taking out your IMEI number.
We should try to make it applicable to the plus series of watches as well - now that so many are buying them.
I will see what we can do over on the http://roundandroidwatches.proboards.com/ to help with that.
Also the larger screen X5 and Q3 (mtk 6572) series would be great with this. I think that the build.prop just has inverted screen set in ro.softwarerotation=180 - and probably in the boot image as well.
Click to expand...
Click to collapse
I'm open to help with any development, for other devices with the same chipset (6572) you can try to do a porting of this rom (search for mediatek porting) but probably, sensors (and some other hardware) will not work). You can also take the device and vendor from github and use it as base to build your own image
With other chipsets, if it has 5.1 it could be easier than what I did (4.4 to 5.1) so there is a big possibility.
But as you know, I only have the Atenea but I can offer support to anyone that want to try
hello animation block
hello when i install all the rom and I turn on the smartwatch, animation stays at home animation all the time. thank
@lucasfs16
How to deal with bootlop
https://youtu.be/gS55s0OMmao?t=22m46s
Read first post one more time
And this:
http://roundandroidwatches.proboards.com/thread/30/rooting-proper
lucasfs16 said:
hello when i install all the rom and I turn on the smartwatch, animation stays at home animation all the time. thank
Click to expand...
Click to collapse
Model?
Are you sure that you follow all steps?
Try to do a wipe from recovery.
any chance to see it coming for x3 plus?
thanks for the rom! is incredible!!
I've set, I have a question.
How I can press enter, to enter the wifi password?
Can I use any D5+ ?
I have problem with Backup
when I click on "ROOT" button in MTK Droid Tools i see this
ATTENTION! Requests for confirmation on the device screen are possible!
--- ERROR :system it was not remounted on ReadWrite!
--- ERROR : file adbd not install !
Click to expand...
Click to collapse
TWRP backup is "safe" as MTK backup?
hello animation block
corvus said:
Model?
Are you sure that you follow all steps?
Try to do a wipe from recovery.
Click to expand...
Click to collapse
as he entered the recovery? As I make the wipe in the smartwatch no1 d5?
thanks
@corvus
Can you create a flashable zip to install this by TWRP?
flavioparenti said:
any chance to see it coming for x3 plus?
Click to expand...
Click to collapse
But as you know, I only have the Atenea
Click to expand...
Click to collapse
Without an X3+ or clone I can't do anything.
ganjah957 said:
thanks for the rom! is incredible!!
I've set, I have a question.
How I can press enter, to enter the wifi password?
Click to expand...
Click to collapse
I enter the password with the keyboard and then press back (two times power button) and then you have access to the wifi dialog to press Save. This workaround can be done in almost all dialogs.
Also, you have google play and can test another keyboards. I will try to add some other, but I need to ask for permissions to the developers and this will need some time.
h_z said:
Can I use any D5+ ?
Click to expand...
Click to collapse
Same that above... If I don't have the device or a clone, I can't do anything.
joint00 said:
I have problem with Backup
when I click on "ROOT" button in MTK Droid Tools i see this
TWRP backup is "safe" as MTK backup?
Click to expand...
Click to collapse
You might need to root the image before do a backup. Try this: http://roundandroidwatches.proboards.com/thread/30/rooting-proper
TWRP backup will not backup your imei so you can lose it.
Flyme 6 Rom For Samsung T705 & T700Version information:
-By Cyborg (Chinese developer);
-Applicable Samsung T705 (klimtlte);
-ROM version:Flyme 6 beta version;
-Based on LineageOS 13.0. (Thank you for the work done by Exynos5420 team!)
Introduction to the note:
-Please line based on lineageos 13.0.
Notice:
-For T705/T705M/T705Y and T700!, not for T705C;
-About T700: After a lot of user testing, Flyme6 rom can be applied directly to the T700, without any modification (of course,
T700 does not use the call function)! The specific installation is as same as the T705).
-Please brush machine under twrp recovery;
How to install it?
step1: Download lineageos 13.0 installation package :
T705: https://www.androidfilehost.com/?fid=817550096634787685
T700: https://forum.xda-developers.com/galaxy-tab-s/development/rom-lineageos-13-0-sm-t700-t3554485
(Thanks @deadman96385 build lineageos13.0 rom for T700.)
step2: Flashing lineageos 13.0 use TWRP recovery 3.0+;
step3: Download the flyme6 installation package ;
step4: Flashingflyme6 use TWRP recovery 3.0+;
step5: reboot system
Don't forget to Wipes data,cache,and dalvik before you swipe rom!
Flyme 6 Introduction:
-Depth customization based on Andrews 6.0.1;
-To the content of the axis of the system design more primary and secondary, full of immersion, delicate Smart animation to make browsing the page becomes fun and fun;
-Innovation to join the intelligent thinking engine, can learn the user operating habits, according to the use of scenarios to provide intelligent solutions to create mobile phone light intelligence;
-More powerful parallel space security model allows users to multi-identity scenes can also switch freely.
Flyme 6 Highlights:
-Content Design;
-New word reread; intelligent thinking engine;
-Game mode; night self repair; process reaper; lightning start;
-Informed management of intelligent storage; notification fast management; new multi-task management;
-More features can go to Flyme official website to understand
Description:
-This ROM is based on Flyme open source project Pile fit, thanks Flyme development team, LineageOS development team;
-Use a third party Rec brush into the first brush into Flyme be sure to double clear, double before the data backup;
-Flyme6 first brush to start slowly, need to wait about 15 minutes, please be patient waiting to enter the system;
-If you need to double clear, please brush ROM before the double clear; brush ROM after the double will not be able to start the system;
-This ROM is a personal patch patch, non-Flyme co-development group ROM!
Disclaimer:
-1. The ROM has passed my test! As a result of improper operation of the consequences, I and the forum will not bear any responsibility;
-2. Brush before the phone to ensure that at least 50% or more of the power, and to ensure that the brush machine during the mobile phone and computer without any exception;
-3. Brush a risk, the first brush machine friends, be sure to carefully study the forum brush machine tutorial, otherwise the consequences of their own;
-4. I do not own ROM and the copyright of the program, please study and study for the purpose of legitimate use;
-5. It is forbidden to make your own ROM second tampering published! In particular, no technical content of the second package integration promotion software, offenders must study!
-6. If you brush into the ROM, it means that the above agreement has been accepted by default.
Root Support:
-Magisk Manager
Xposed Support:
-Link: https://www.androidfilehost.com/?fid=745425885120750151
Bugs:
-Fingerprint function can not be used;
-Call function has been tested, basically no problem. But the Mms function may have some problems, such as: when you send information to others, the other party will receive your information, but your tablet shows "send failed", there is no solution, if you know how to do ,please tell me. Thanks @acui @mac231us before doing feedback.
-This is based on Flyme experience version of the adapter, there should be some can not repair the "flyme error". If any, please feedback, maybe in the next version to solve!
Changelog:
---------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.07.20]:
-First beta;
-Added magisk root
-Update the release files for version Flyme 6.7.7.14R;
---------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.07.21]:
-Change version: Flyme 6.7.7.14R Cyborg-build-v2.0;
-Update magisk root version:
-Latest Stable Magisk Version: v13.3;
-Latest Magisk Manager Version: v5.1.1;
-Optimize the brush machine script, brush machine humanization process.
---------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.07.28]:
-Change version: Flyme 6.7.7.21R Cyborg-build-v3.0;
-Update the release files for version Flyme 6.7.7.21R;
-Add xposed support,you have to install this zip by recovery : https://www.androidfilehost.com/?fid=745425885120750151
-Change the DPI-320 to DPI-420;
-Optimize the brush machine script, brush machine humanization process.
--------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.08.18]:
-Change version: Flyme 6.7.8.11IR Cyborg-build-v4.0;
-Update the release files for version Flyme 6.7.8.11IR;
>> function adjustment
• System
Clearly tell you that the lock on the page that thing, waiting for the next time you will be locked when you know
Charm blue 5 / charm blue 3 / charm blue U10 / charm blue U20 replacement for the bottom of the Android, charm blue metal / charm blue 2 / charm blue 2 telecommunications version of the follow-up adjustment
• Calendar
Birthday / Anniversary / Countdown Day, Female Ticket Rhapsody Hurry to record it so as not to kneel the keyboard
Path: Calendar - New event - more options
>> Problem improvement
• phone Guardian
Repair the virus killing into the scanning state did not stop after the phenomenon
Repair mobile phone thin with the virus killing the same after the start also stopped the phenomenon
Repair the use of security scanning scan ticket two-dimensional code after the phenomenon of garbled
Other
Repair in the "reading" in a section of the text after clicking to share to the QQ will prompt the picture does not exist
Repair long press the home key or by language to wake up the "voice assistant" can not be recorded after the phenomenon
--------------------------------------------------------------------------------------------------------------------------------------------------------
[2017.10.01]:
-Change version: Flyme 6.7.9.22R Cyborg-build-v5.0;
-Update the release files for version Flyme 6.7.9.22R;
>> function adjustment
Function adjustment
Focus on optimizing the system resource allocation strategy, and comprehensively enhance the system stability and fluency
For the game scene for resource tilt, improve the game frame rate and performance during the game more fun
High frame rate mode automatically tighten the strategy to reduce the power consumption of mobile phones, reduce heat and so on
>> Problem improvement
• Camera
Repair open slow, open when the phenomenon of short black screen
• Video
Repair play local video and online video, there are Caton phenomenon
Resolve the problem that the video is still pushed after the push is pushed
--------------------------------------------------------------------------------------------------------------------------------------------------------
Download link:
---------------------------------------------------------------------------------------------------------------------------------------------------------
-[2017.07.20]: https://www.androidfilehost.com/?fid=961840155545583261
---------------------------------------------------------------------------------------------------------------------------------------------------------
-[2017.07.21]: https://www.adroidfilehost.com/?fid=817550096634787379
---------------------------------------------------------------------------------------------------------------------------------------------------------
-[2017.07.28]: https://www.androidfilehost.com/?fid=817550096634788959
---------------------------------------------------------------------------------------------------------------------------------------------------------
-[2017.08.18]: https://www.androidfilehost.com/?fid=889764386195923711
---------------------------------------------------------------------------------------------------------------------------------------------------------
NEW-[2017.10.01]: https://androidfilehost.com/?fid=817906626617934764
Thanks:
-Flyme group: https://github.com/FlymeOS/flyme-release
-Lineageos group: https://github.com/LineageOS
-Magisk group: https://forum.xda-developers.com/apps/magisk
-Exynos 5420 Team: https://github.com/exynos5420
-Other people who are not listed but who make efforts.
Wow, amazing. Thanks for sharing.Could it be installed on T700??
Enviado desde mi Redmi Note 3 mediante Tapatalk
alberbrando said:
Wow, amazing. Thanks for sharing.Could it be installed on T700??
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
After a lot of user testing, Flyme6 rom can be applied directly to the T700, without any modification (of course,
T700 does not use the call function)! The specific installation is as same as the T705).
Telephone is good, data is good, can accept text message but cannot send text message
i will try to port it for t700 shouldnt be hard as i have ported a lot of roms from other devices to t700 but it will be online quite late cuz i have 0.1mbit upload
TimurAlaskara_TR said:
i will try to port it for t700 shouldnt be hard but it will be online quite late cuz i have 0.1mbit upload
Click to expand...
Click to collapse
Great,Timur.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Is this rom based tw or aosp ?
Envoyé de mon SM-T705 en utilisant Tapatalk
aumast said:
Is this rom based tw or aosp ?
Envoyé de mon SM-T705 en utilisant Tapatalk
Click to expand...
Click to collapse
Based on lineageos 13.0
acui said:
Telephone is good, data is good, can accept text message but cannot send text message
Click to expand...
Click to collapse
Yes, but the message is not to send a failure, only to show "send failure" on T705, in fact the other person has received your message.
TimurAlaskara_TR said:
i will try to port it for t700 shouldnt be hard as i have ported a lot of roms from other devices to t700 but it will be online quite late cuz i have 0.1mbit upload
Click to expand...
Click to collapse
It's nice to see that you can prot it to T700, but you have to be aware that some bugs might not be fixed, because this flyme version is a beta version ！
Good luck!
yang_w said:
It's nice to see that you can prot it to T700, but you have to be aware that some bugs might not be fixed, because this flyme version is a beta version ！
Good luck!
Click to expand...
Click to collapse
yep i have used flyme os 6 on s7edge and s3 noth were crap
we need to wait for future builds
fixed flashing error...
that was fast!...wow (understand was under development already) thanks...downloading now
---------- Post added at 08:16 PM ---------- Previous post was at 07:44 PM ----------
getting some symlinks faliked error 7 in updater process (error installation) - this is for twrp 3.1.1 and did full wipe (system, cache, data, dalvik/art cache before flashing.
fixed flashing error 7
reboot recovery
go to mount panel and uncheck cache
then full wipe (if not done already) then flash the zip
booting now...
---------- Post added at 08:56 PM ---------- Previous post was at 08:16 PM ----------
yang_w said:
Sorry, it does not work with T700 because I only have T705. But I believe flyme6 can be used on the T700, provided that there is a developer to adapt it
Click to expand...
Click to collapse
tried v2 on my T705M (705 Latin American version) ..calls work (no reboots no sound issues-except other caller/person at other end of line can hear his sound (slight)..common issue on many CM/AOSP in my experience for some of these tablet phone devices (not the pure smartphone devices - think something to do with mic and internal speaker arrangement)...however tab A 7.0 T285 CM 13/14 has no such issues not sure why (is a 7 inch tablet phone device) so not sure
anyway you have my report on the calling function-maybe someone else has some more ideas/insight or different experience..thanks
Thank you for some feedback on the call function, which will give some reference to other users. In fact, after the test, in my T705 (TGY Hongkong, China) on the call function is very perfect, but the Mms function will be some problems, I have not found a solution to the problem.In fact I have only one Nano Sim card, but it is applied to my Iphone 7plus, so testing these features will be more difficult.
--About Flash this flyme6 rom:
This Flyme6 is based on lineageos13 production, so it is best to flash los13 / cm13 first, and then flash flyme6, this Introduction may avoid some mistakes. If you did not flash los13 / cm13 before, you may need to FULL WIPE, and then brush into flyme6, of course, I did not test this operation.
i can confirm that this rom is also working verrrryyy well on t700 without any extra bugs. i flashed this rom over full aosp 7.1.2. it has still got all these stabdard flYme os bugs on board. another thing is that it is based on a phone ui and it needs some optimization for tablets just like i did on my old sucuk rom for tab s.
future builds without flyme os bugs would make it possible to use this as a daily driver
yang_w said:
Thank you for some feedback on the call function, which will give some reference to other users. In fact, after the test, in my T705 (TGY Hongkong, China) on the call function is very perfect, but the Mms function will be some problems, I have not found a solution to the problem.In fact I have only one Nano Sim card, but it is applied to my Iphone 7plus, so testing these features will be more difficult.
--About Flash this flyme6 rom:
This Flyme6 is based on lineageos13 production, so it is best to flash los13 / cm13 first, and then flash flyme6, this Introduction may avoid some mistakes. If you did not flash los13 / cm13 before, you may need to FULL WIPE, and then brush into flyme6, of course, I did not test this operation.
Click to expand...
Click to collapse
yes just noticed today that the lineage 13 is needed to flash first (I did not do this-had a custom MM stock-based rom before this, then did the full wipe and directly went to the flyme package) Will do the stated method in the original post OP thanks
TimurAlaskara_TR said:
i can confirm that this rom is also working verrrryyy well on t700 without any extra bugs. i flashed this rom over full aosp 7.1.2. it has still got all these stabdard flYme os bugs on board. another thing is that it is based on a phone ui and it needs some optimization for tablets just like i did on my old sucuk rom for tab s.
future builds without flyme os bugs would make it possible to use this as a daily driver
Click to expand...
Click to collapse
Please share your build for t700
U don't need to port t705 ROMs to t700 .. They usually work without any edit.
U can also flash it without flashing lineage before
Linage (cm) has hardware issues with the t705 requiring some rewrite of the device tree, since the devs are busy with N this most likely will not be solved at all. These issues effect fingerprint sensor, mic, and battery drain ( in some cases a rouge process clocks the processor at 40% continuously ).
All ROMs using Lin/cm codebase ( and the deathly kernel obviously ) will share the same probs in part or in whole ( exception to this is vanir who do a lot of their own work on top of the cm codebase ).
This ROM is the same, a bunch of commits put on top of a very shaky base.
I am working on a solution but it will be aosp based since they have the only fully operational ( as regards to hardware ) implementation (have reposted it ), some mild kangs on top of the already working code.
PS. The unofficial cm13 build at XDA has solved some of the bugs ,being outside of the official cm13 branch, fingerprint and others still there.
TimurAlaskara_TR said:
yep i have used flyme os 6 on s7edge and s3 noth were crap
we need to wait for future builds
Click to expand...
Click to collapse
Hello, TimurAlaskara_TR. Can you tell me how to port it to the T700? There are already many people who need T700 flyme6. If you tell me the way, I will modify and upload to AFH.
To port it too t700. A t700 will be required. Thats all. Although the t705 version may flash as is to t700
Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT INFORMATION
Hi all,
This ROM is in a very early development stage, so you can expect a lot of things broken.
Please don't expect to use this ROM as a daily driver.
What is working:
Audio (playback)
Bluetooth
Graphics
Camera - photo, video recording (w/out audio)
Sensors
RIL
GPS
Wifi
USB
Video playback (HW/SW)
What is not working:
Audio recording
Proximity & Orientation sensors
GPS
Camera may not start at times
System time issues (alarm might not work or start with a delay)
maybe yet something
Download:
AndroidFileHost
Installation order:
The installation below requires a repartition of the phone internal sdcard in order this ROM fit on /system partition. DO NOT proceed an installation if you are unsure what you're doing and how to deal with a possible consequencies.
before installation make sure you have a TWRP recovery
install chrono kernel (both ROM and the corresponding kernel are located in the same directory - see ROM link below)
reboot recovery
flash ReParted zip. This will wipe system, data and cache partitions!
install ROM
install chrono kernel again
*please note a possibly undesirable effect of the repartition: cache partition will be decreased to 15 MB and some ROMs that rely upon this partition won't boot. To restore original sdcard partition layout, flash stock 4.1.2 ROM (with PIT file).
Credits:
@SergeyL
@rINanDO
@AdrianDC
@3liteking148
@Meticulus
@Unjustified Dev
@golden-guy
@nieltg
@isaak
@NovaFusion
@TeamCanjica
LineageOS community
Google
Special Thanks:
@isaak, @enkflr, @Pdevo, @prometej-zg for donating this phone!
[*]@S.AMU for providing FTP-Server
Source code:
Manifest: LOS 16.0
Device tree: LOS 16.0,
Kernel: LOS 16.0
other repos
XDA:DevDB Information
LineageOS 16.0, ROM for the Samsung Galaxy S Advance I9070
Contributors
ChronoMonochrome
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP recovery 3.x
Version Information
Status: Alpha
Created 2018-12-31
Last Updated 2018-12-31
Reserved
Reserved
Wow, works better than Oreo
Srsly, little more tweaking and this is suitable for daily use
is it possible to implement these functions in the janice kernel?
github.com/pelya/android-keyboard-gadget
Gonna try it today in 5 hours maybe, use it for a day and give my feedback. thanks for keeping this phone alive. Also have u tried magisk with this rom? I will try it anyway but i just wanted to know.
Here is my feedback.
1- No space for flashing pico gapps so I guess we will have to use microG.
2- Random freezes that takes like a minute then locks the phone.
3-Sometimes, WiFi didn't work and I had to restart. When pressing the icon it flashes green then goes back to grey again.
4-Bluetooth isn't working at all ( not sure if it's only me or what because it never worked on LOS 15.1 too ).
5-GPS not working as well.
6-I hope you add HardwareKeys remap, navigation gestures and Traffic monitor, of course if you don't mind.
..
That's pretty much it. If you can fix the second and third problems, this ROM can be used as a daily driver.
Sent from my GT-I9070 using XDA Labs
Sorry for OT but, @ChronoMonochrome you considered working on PMOS for 9070?
It's nice idea and porting require talented people like you
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_S_Advance_(samsung-i9070)
Bx16 said:
Sorry for OT but, @ChronoMonochrome you considered working on PMOS for 9070?
It's nice idea and porting require talented people like you
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_S_Advance_(samsung-i9070)
Click to expand...
Click to collapse
Nice to see some efforts of developing custom ROMs here, but amount of non-working features scares me
I would rather stick updating some my older ROMs like UltimateROM (but no promises though).
Mainlining/forward porting work always comes handy, irrespective of whether one's interested to Android/Linux or GNU/Linux.
I cannot believe this device is still getting updates
excuse my rudeness but do u plan on updating this rom or should i lose hope ?
How do i install this room? I tried everything but always got or error 7 or infinite samsung screen without being able to go to recovery mode, so found myself going back to stock over and over again :/
DeathArcanaXIII said:
How do i install this room? I tried everything but always got or error 7 or infinite samsung screen without being able to go to recovery mode, so found myself going back to stock over and over again :/
Click to expand...
Click to collapse
You have to upgrade from 2.3 rom to a 4.2 rom first like this (if it didn't work, consider using this )in order to upgrade the bootloader then you can install this rom. But i wouldn't recommend this rom as its not stable. LOS 15.1 is far more stable for a daily driver.
Pie works great, but one (maybe silly) question...
Where to get GApps for this ROM?
.czarodziej said:
Pie works great, but one (maybe silly) question...
Where to get GApps for this ROM?
Click to expand...
Click to collapse
https://wiki.lineageos.org/gapps.html (you need GApps for ARM platform).
Does this ROM work on the Galaxy S gts7582? Would the developer of this ROM solve the 15.1 Lineageos bugs for the gts7582?
oseiasrodrigues0 said:
Does this ROM work on the Galaxy S gts7582? Would the developer of this ROM solve the 15.1 Lineageos bugs for the gts7582?
Click to expand...
Click to collapse
Provably not, they're completely different devices.
The dev need access to the device or at least a very very similar one to look at bugs properly so I guess no.
enkflr said:
Provably not, they're completely different devices.
The dev need access to the device or at least a very very similar one to look at bugs properly so I guess no.
Click to expand...
Click to collapse
Is that the gts7582 has lineageos 15 It initializes only does not work anything video, audio, etc. So I thought some dev could solve the bugs of this ROM. But thank you very much for the answer
I installed lineage os 16 on my s advance this is how it went:
1. Bluetooth kept crashing idk why but i uninstalled the bluetooth apk so it dosen't work at all
2. MicroG
It works fine i flashed it and it has signuature spoofing already on yay and it dosen't get stuck in the boot animation after restart
3. Kernel
Oh yeah overclocking is fun i overclocked the cpu to the max and it works amazing
4. Camera
Works but not video
Its ok but bluetooth sadly not working but idc
Its not my main phone anyway thankgod <3
Device and Project Presentation
In 2015 the Chinese company EStar launches on the market the Takee 1. An octa-core smartphone with an astonishing Holographic 3D technology developed by the german Seereal.
Despite the cutting-edge hardware, a low price and the big innovations in the field of 3D and AirTouch... the phone does not receive the big success it deserved, Estar closes down and the last official software update dates back to 2015, leaving the whole system stuck to Android 4.2.
But today, 5 years after the last update and the closure of the company, I continue what the far-sighted EStar was doing, studying 3D technologies and releasing a new Android 7 Software Update.
I had to face many difficulties but...
making an Android 7 ROM from just an Android 4.2 base is now possible!
Let's go guys!
Presentation Image
https://imgur.com/Be7YKsg
Other screenshots
https://imgur.com/a/RRyUNL7
Youtube video
The last ROM is v. 3.0
Everything works except the Cameras. 3D partially works.
Changelog (click to show history of working/not working components)
v2.0
Magisk improvements
v1.2
Bluetooth Now Working
Full Holographic 3D and AirTouch support - in Development
v1.1
Usability
WiFi module - Working
Phone module - Working
Audio - Working
Camera - Working (you have to apply a fix)
Fm radio - Working
USB debugging - Working
Bluetooth - Not working but I'm working on a fix!
v1.0
First release that can boot, no need to download it.
Theming
Transition from RidonOS to Mik-el Android:
Removed most of the references to RidonOS and Micromax 311
Mik-el bootscreen (boots faster)
Mik-el wallpaper
Apps
Replaced Ridon launcher with a lighweight Open Source Pixel Launcher
Removed Old Google apps, size of the Rom reduced
Added F-Droid, Open Source alternative to Google play store
Added an Open Source alternative to Youtube
Added 52kb app to exchange files on wifi between smartphone and PC
Added OpenCamera, best android camera app (and it's Open Source)
Added High-quality Audio recorder with noise reduction
System and Performance
Enabled USB Debugging by default
Adjusted dpi value: screen is more readable and system is more reactive!
First step to port the Bit Cauldron 3D Audio Technology included in the Takee stock Rom: Removed loudsound patch to avoid possible future conflicts
Mik-el fixes to extend the life of your device
system warns you when you reach high temperatures
system doesn't write on the phone memory over and over again (The original Takee 1 stock rom is based on Android 4.2 and trimming was introduced starting from Android 4.3 only)
you can install apps directly on external SD card - starting from v. 1.2
Support me:
Telegram Channel here
Instagram here
Youtube here
Paypal here
XDA:DevDB Information
Mik-el Android 7 for EStar Takee 1
Contributors
Mik-el
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.4.67
Version Information
Status: Stable with some bugs
Created 2019-11-02
Last Updated 2021-10-16
TWRP by Mik-el - Download and Instructions
To flash an Android 7 Rom You must use an updated TWRP custom recovery!
I made a new TWRP for Takee 1 and I released 2 versions
TWRP 3.1.1. here
TWRP 3.1.1 with OTG support here
Instructions and Screenshots are included in the previous links.
Rom Download
Free Download, Virus Free (just use "slow download")
v 1.1-------------> here
v 1.2-------------> here
v 2.0-------------> here (10th March 2021)
v 2.0.1 Bundle*---> here (9th April 2021)
v 3.0 (3D) and Bundle*--->here (16th October 2021)
* = Bundle includes= ROM + Optional Stuff among: Google Apps, SuperSU root and Magisk!
Google Apps
Google Apps 2021. Most lightweight version possible. We love privacy, so they're optional.
I made a flashable .zip to install them from TWRP recovery but it seems not working for me, you can test it and let me know.
Magisk or Root? What do you want?
I want Magisk = Rom 2.0.1 is pre-patched for Magisk (boot.img). After booting the ROM just install the Magisk Canary apk. (Apk included in the 2.0.1 bundle you have just downloaded).
I want Root =before installing the 2.0.1 ROM, take the "boot_unrooted.img" file inside the 2.0.1 Bundle you just downloaded. rename this file in "boot.img" and replace it inside the .zip file of the ROM. Now you can flash the ROM and then flash SuperSU through recovery
Rom Integrity Infos
Code:
Name: Mik-el_Android_for_Takee_v1.1.zip
Date: 27/12/2020
Size: 602 MB (631,352,946 bytes)
--------
SHA-1: 260999abe54d3ae473272a4002cc9cef2ea93e60
MD5: c2fb20469f11a2f6c16c0479a8c157f6
CRC32: 8436c496
General Advices about Takee 1
Don't use the original charger, probably you have a good one but it gave problems to most of the users
Don't try to flash this rom with SP Flash tool, you can't, follow the instruction I'm providing here
Instructions to flash the ROM:
Backup 3D calibration files or you'll lose the 3D effect forever. Internal and External storage -> "Android" folder -> "HolographyProfile" file and "matrix" file. To know more about 3D calibration, read this! Also, backup your important data, as always;
Boot your Stock Rom and check if you still have these (or other) Air Touch games in your phone storage.
Fruit Ninja (it looks like this)
Sector Strike (it looks like this)
This game (it looks like this)
This other game (it looks like this)
Shadow Snake (it looks like this)
Tunnel Trouble (it looks like this)
If the answer is YES, go to step 3. Otherwise, go to step 4.
Spoiler: YES, I still have Air Touch Games
These Air Touch games can't be downloaded anymore! The Takee 1 3D store is offline! Now you can help the Takee community preserving these games for the future. You just need 1 minute. Download the ApkExtractor app (2.4 MB), save the games on your external SD card and upload them somewhere on the web! Then, you can flash the new Rom.
Download and Install the updated TWRP custom recovery made by me, if you haven't done it yet:
TWRP 3.1.1. here
TWRP 3.1.1 with OTG support here
Download my Rom, it's a .zip file;
Copy the Rom file on your MicroSD;
Once you have installed the recovery you can boot into it;
"Wipe" -> "Swipe to Factory Reset";
"Install" -> select the .zip file for the Rom -> "Swipe to flash"
"Reboot" -> "System"
A tip to Improve Rom Performance
Use the Rom for a few minutes and see how it performs. After that, open the fstrim app included in the Rom and use it to trim the internal storage of you device. This will be the first trim you'll phone has received in 6 years, since 2015 ! It took me 3 trims in a row to fully trim my /data partition. Now see how much more responsive the phone has become!
How to solve Camera Bug for ROM version 1.1
Open the "Reboot Manager" app and do a quick/warm reboot, now your cameras work!
Spoiler: Click here for an Alternative Method
Go to Settings
Go to developer options
Activate "extended reboot menu"
When you want to use the camera:
Long press power button and select "reboot" - you will be asked, which type of reboot you want to do
Select "warm reboot"
Camera is now working!
Definitive solution
Will be solved in the next release.
Help me with testing and support me to get an invincible Rom!
Next updates
Full 3D and Airtouch Support
Camera ready at boot without warm reboot
"Mik-el Rom Updater" to update the system with one touch
Bluetooth Fix
whatever you want!
Support me
Leave a 5 stars review and a positive review using the panel on XDA.
Use these links to support me:
Telegram Channel here
Instagram here
Youtube here
Paypal here
Credits
Mik-el
a big hug to @io2345 for:
helping me with testing and fixes
donating 10 euros for the development
for exchanging almost 150 mails with me to bring this project to life!
@YuriRM
for having collected information and having made a detailed list of Hardware specs from phones similar to the Takee 1
for his continuous effort to bring back interest in this device on XDA and Telegram
@kano3d
for donating 4 euros for generic 3D development
other members of the Takee 1 community (@giotogo, @Talwarmirza, @snapss , @Hunter_07)
an unknown artist for the Mik-el Android wallpaper
Reserved for future Updates.
P.S. Ignore the very next posts below: intially the community and I were talking about other things (problems faced during development), and NOW that the Rom is ready I updated this same thread, to don't make a new one. Now, Enjoy
ROM for Holographic 3D smartphone
Thanks! This ROM will bring a fresh air and new lease of life to EStar TAKEE 1, the first ever Holographic 3D smartphone launched in 2015 at an affordable price ($100-150). Nobody will need to buy an extremely expensive RED Hydrogen One at $1200.
The 3D community will rejoice!
The amazing resources of PHEREO are available to all lovers of 3D Stereo Images and Photos.
http://phereo.com/
Select an image and click Wiggle... if you do not have a smartphone with 3D display.
My advice is to install the PhereoRoll3D app too!
https://github.com/JackDesBwa/PhereoRoll3D
NewPipe - to download 3D videos from YouTube
https://github.com/TeamNewPipe/NewPipe/
INVIDIOUS - to download 3D videos from YouTube, VEVO, etc.
https://www.invidio.us/
Plenty of resources for 3D lovers that justify buying a device with 3D display.
interesting. this phone is still good.....
Anyone with ViperOS development experience?
io2345 said:
Anyone with ViperOS development experience?
Click to expand...
Click to collapse
More than ViperOS developers we need someone that has experience with rom porting.
I made more than 7 releases for this ROM and @io2345 tested them all!
We solved the failed installation problem, now we just need to solve the bootloop.
The porting process is OK, the updater-script file is OK, file permissions are OK...
I don't know where the problem could be!
Next time I'll use another porting guide. (there are only 2 guides and one didn't work since now)
Instead of ViperOS I'll also use a LineageOS rom as port rom.
Let's see what I can get.
(Stay tuned subscribing to this thread and collaborating with us, cheers)
Greek & Indian ROM ports by Jpower7 (A310 kernel) and blacklisted.rock (A311 kernel)
My suggestion is to try other 3.4.67 ports for EStar Takee 1.
ROM ports by Jpower73 (A310 kernel) - Greece
He maintains working links for his ROMs. Therefore, you can also ask his help.
(Android Ice Cold Project) for Coolpad F1/MmxA310-Α311/Himax Polymer Octa by Jpower73
https://forum.xda-developers.com/a310/development/android-ice-cold-project-coolpad-f1-t3802656
HTC SENSE 10 for Coolpad F1-A310-Himax Polymer Octa by Jpower73
https://forum.xda-developers.com/a310/development/htc-sense-10-coolpad-f1-a310-canvas-t3952369
Poly Os for Coolpad F1/Micromax Canvas Nitro A310/Himax Polymer Octa by Jpower73
https://forum.xda-developers.com/a310/development/poly-os-coolpad-f1-micromax-canvas-t3801223
ROM ports by blacklisted.rock (A311 kernel) - India
The developer does not use his device anymore. His phone is over 5 years old and the battery is malfunctioning.
[BUGLESS][7.1.2]Ridon OS for A310/A311/Coolpad F1/Himax Polymer by blacklisted.rock
https://forum.xda-developers.com/a310/development/bugless-ridon-os-a310-a311-coolpad-f1-t3779279
[ROM][FINAL]Resurrection Remix OS 5.8.5 V4.0 for A311/A310/Coolpad F1/Himax Polymer by blacklisted.rock
https://forum.xda-developers.com/a310/development/rom-resurrection-remix-os-5-8-5-v4-0-t3786640
But you can look for other ROMs here
https://forum.xda-developers.com/a310/development
List of TAKEE 1 clones for parts by YuriRM
https://forum.xda-developers.com/showpost.php?p=74386084&postcount=1199
EStar Takee 1 - list of components
http://deviceinfohw.ru/devices/inde...=cpu0&brand=brand0&filter=takee&submit=Search
HIMAX POLYMER - 10 shared components with EStar Takee 1
Back CAMERA and Front CAMERA (sunny_imx135_mipi_raw and ov5648_mipi_raw), LENS, ALSPS, one part in two of CHARGER (fan5405), PMIC, WIFI and two parts in four of OTHERS (kd_camera_hw and dummy_eeprom) and RAM.
http://deviceinfohw.ru/devices/item.php?item=1083
Micromax A311 \ A315 \ A316 - just 1 shared component with EStar Takee 1
Back CAMERA
http://deviceinfohw.ru/devices/item.php?item=4999 (A315)
http://deviceinfohw.ru/devices/item.php?item=3526 (A316)
There is no data for Micromax A311 and A310
http://deviceinfohw.ru/devices/inde...m0&brand=brand0&filter=Micromax&submit=Search
I have requested to upload the list of components of Micromax A311 and A310 to the Device Info HW database
Android 4.4.2 KitKat kernel - BQ Aquaris E5 FHD
Official source code for BQ Aquaris E5 FHD
https://github.com/bq/aquaris-E5FHD
Have you acquired knowledge enough for including specific drivers of EStar Takee 1 into this Android 4.4.2 KitKat kernel of BQ Aquaris E5 FHD?
You will get a much better kernel (3.4.67) than luckasfb.
Instructions
Building custom kernels for Android devices
https://source.android.com/setup/build/building-kernels
SavageMessiahZine - Russian forum of Android kernels and assembly instructions
Development of kernels and firmware for devices on the MTK platform � | Self-compiled kernel from source � | Instructions for building ANDROID from sources. � | Theme on assembling the source code MTK on china-iphone | Build TWRP for Qualcomm platform �
https://www.savagemessiahzine.com/forum/index.php?showtopic=583114
Guidance from LordArcadius (GitHub and Telegram) and nathanchance (XDA)
Compiling Android Kernel for your own device #67
https://github.com/ILUGD/talks/issues/67
XDA Reference guide:- https://forum.xda-developers.com/an...erence-how-to-compile-android-kernel-t3627297
Help and support Telegram group:- http://t.me/LinuxKernelChat
Upstreaming guide:- https://forum.xda-developers.com/an...rence-how-to-upstream-android-kernel-t3626913
Toolchain:-
GCC 4.9 for 64 bit:- https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/
GCC 4.9 for 32 bit:- https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/
My Telegram username:- @LordArcadius
GPIO pin numbers in the Circuit Board of EStar Takee 1
I hope there is a solution for camera bugs introduced by luckasfb in his latest kernel of EStar Takee 1.
Some KitKat kernels share both cameras (Sony imx135_mipi_raw and OmniVision ov5645_mipi_yuv) with EStar Takee 1.
However, it may be down to GPIO pin numbers in the Circuit Board. That is why I want to know the Circuit Board ID number, the physical address number of each component and GPIO pin numbers of camera sensors of those devices.
That info is included in the kernel source code of BQ Aquaris E5 FHD.
@giotogo can you find this information inside your EStar Takee 1 device, please?
Circuit Board ID number
GPIO pin numbers of camera sensors in the Circuit Board
Take detailed photos of internal components
Take detailed photos of internal numbers printed in the motherboard.
This information may help find other devices that share an identical Circuit Board ID number. This list of most compatible devices is useful. Hopefully, It will enable to choose the easiest Android 7.1.2 Nougat ROM to port into EStar Takee 1.
It also provides crucial information for changing the GPIO pin numbers of both cameras in the KitKat kernel source code of EStar Takee 1.
Bug in power for cameras GPIO pins in codegen - EStar Takee 1
https://forum.xda-developers.com/showpost.php?p=79024675&postcount=1361
The video below shows how to open a device and find the Circuit Board ID number.
However, my guess is that it boils down to the physical address number of each component and GPIO pin numbers in the motherboard. This enables to direct each camera driver (front and back cameras) to a specific address in the Circuit Board (GPIO pin number). This is the info that luckasfb tried so hard to find, trying by hand hundreds of combinations for GPIO pins. He did not open the case of his EStar Takee 1 device.
How to Find and download Firmware file for chinese tablets
https://www.youtube.com/watch?v=XZqLoxpbUSA
How to fix a bootloop after installing a Custom ROM like Viper OS
io2345 said:
Anyone with ViperOS development experience?
Click to expand...
Click to collapse
@io2345 how are you doing? It has been a long time since we last talked.
I may have found a solution for the bootloop of the Viper ROM ported by @Mik-el.
Can you test this method, please?
Have you watched this video by the clever german guy, Christoph Zahradnik ?
His Viper ROM is used in this explanation... Viper SC2_5.2.1.zip ?
How to fix a bootloop after installing a Custom ROM like Viper OS (07/03/2015)
By Christoph Zahradnik
https://www.youtube.com/watch?v=cgYXy2XC1SM
Below find what happened on the previous day.
HTC Sensation (Snapdragon S3) and Viper ROM - installing a Custom ROM and entering a bootloop (06/03/2015)
By Christoph Zahradnik
https://www.youtube.com/watch?v=-Snab4bsnzQ
YuriRM said:
I hope there is a solution for camera bugs introduced by luckasfb in his latest kernel of EStar Takee 1.
Some KitKat kernels share both cameras (Sony imx135_mipi_raw and OmniVision ov5645_mipi_yuv) with EStar Takee 1.
However, it may be down to GPIO pin numbers in the Circuit Board. That is why I want to know the Circuit Board ID number, the physical address number of each component and GPIO pin numbers of camera sensors of those devices.
That info is included in the kernel source code of BQ Aquaris E5 FHD.
@giotogo can you find this information inside your EStar Takee 1 device, please?
Circuit Board ID number
GPIO pin numbers of camera sensors in the Circuit Board
Take detailed photos of internal components
Take detailed photos of internal numbers printed in the motherboard.
This information may help find other devices that share an identical Circuit Board ID number. This list of most compatible devices is useful. Hopefully, It will enable to choose the easiest Android 7.1.2 Nougat ROM to port into EStar Takee 1.
It also provides crucial information for changing the GPIO pin numbers of both cameras in the KitKat kernel source code of EStar Takee 1.
Bug in power for cameras GPIO pins in codegen - EStar Takee 1
https://forum.xda-developers.com/showpost.php?p=79024675&postcount=1361
The video below shows how to open a device and find the Circuit Board ID number.
However, my guess is that it boils down to the physical address number of each component and GPIO pin numbers in the motherboard. This enables to direct each camera driver (front and back cameras) to a specific address in the Circuit Board (GPIO pin number). This is the info that luckasfb tried so hard to find, trying by hand hundreds of combinations for GPIO pins. He did not open the case of his EStar Takee 1 device.
How to Find and download Firmware file for chinese tablets
https://www.youtube.com/watch?v=XZqLoxpbUSA
Click to expand...
Click to collapse
Here is photos. i hope, you find what you want
https://ibb.co/3Nc72LG
https://ibb.co/NZpGbPm
https://ibb.co/Sf2bnL6
https://ibb.co/ygg1jWq
https://ibb.co/0sRmXKy
https://ibb.co/vqRcg8P
YuriRM said:
@io2345 how are you doing? It has been a long time since we last talked.
I may have found a solution for the bootloop of the Viper ROM ported by @Mik-el.
Can you test this method, please?
Yurim, I'll try my best to get it done the next weeks. Currently time is a rare factor...
As far as I know, the device of Mik-el is working now (more or less). So it might be a good idea to let him try this method himself.
Click to expand...
Click to collapse
Found the time today and tried the method via fastboot. Sadly to say, it doesn't change anything. Phone keeps bootlooping.
@io2345 @giotogo
I'm chatting with @blacklisted.rock on telegram. He said he'll send me a better porting guide.
Me and @YuriRM have already chosen a new and better rom to use as port rom.
The failed installation/ updater-binary errors were already solved in my last viperOS port.
Hopefully this time we'll get a booting Android 7 rom.
Regards
@io2345 @giotogo
I'm chatting with @blacklisted.rock on telegram. He said he'll send me a better porting guide.
Me and @YuriRM have already chosen a new and better rom to use as port rom.
The failed installation/ updater-binary errors were already solved in my last viperOS port.
Hopefully this time we'll get a booting Android 7 rom.
Regards
{Mod edit: Quoted post has been deleted}
why you need this damned phone?
Hi everyone, I am also the owner of takee1.
I haven't used it for a long time, but when I saw that someone was doing something to bring it back to life, it gave me hope.
I would be interested in updating it with a more current rom, since 4.2 is no longer compatible with anything!
I hope it will be possible soon.
These Chinese continually churn out new models, but never firmware updates!....shamefull!
June 2020 Updates: Rom ported! Now we need a recovery!
June 2020 Updates: Rom ported! Now we need a recovery!
Guys, I've really faced a lot of problems when trying to port this rom:
1) I had to wait 5 months to receive a working battery from China, thank you Corona Virus...
2) university... XD
3) porting guides on the web suck, I had to contact many people and study many articles and video guides... until I had to make my own porting guide...
4) some tools to extract boot.img files extract .img files, but with a wrong structure!! (and I discovered this just recently!)
5) I had to change the port rom, now I'm not using a ViperOS rom, but a RidonOS rom from a Micromax device much more similar to Takee 1 (more than 90%of the hardware is identical)
6) I want to thank you @io2345 for helping me to test over 10 roms!! We had to exchange almost 100 mails to bring you a new and updated Rom!!
Anyway after all this FREE effort I think that I finally got a working Rom !! (correctly ported!!)
But we dhave another problem now...
We discovered that the custom recovery we use on Takee 1 (twrp 2.8.0.0. developed by @luckasfb ) is too old to support Android 7! We need a new custom recovery, probably a twrp 3.0 or above.
I've already researched new material and guides on the web. I found a guide that seems to clearly explain how to port a custom recovery to any device.
The process is simple, it consist in the extraction of the recovery from an Android kitchen in Linux, the rest is about replacing files.
Is this the end, or not?
Anyway the process is long and boring...
I'm quite busy with exams, life a few other projects...
I don't know if continuing this project is convenient for me at this point...
If someone wants to help me and @io2345 please leave a message hereunder, I'll leave you links and infos about the recovery porting.
Cheers!
A reward of 20 euro is awaiting your delivery of a fully working Android 7 ROM + custom recovery.
I expect @io2345 to reward you as well:
Regarding TWRP-3.1 custom recoveries for EStar Takee 1, I did some porting attemps from 5-19 November 2017.
https://forum.xda-developers.com/showpost.php?p=74410087&postcount=1201
https://forum.xda-developers.com/showpost.php?p=74434705&postcount=1202
https://forum.xda-developers.com/showpost.php?p=74482513&postcount=1203
https://forum.xda-developers.com/showpost.php?p=74488944&postcount=1205
https://forum.xda-developers.com/showpost.php?p=74540282&postcount=1206
https://forum.xda-developers.com/showpost.php?p=74564282&postcount=1207
TWRP for BQ Aquaris E5FHD
https://twrp.me/bq/bqaquarise5fhd.html
Current version
twrp-3.4.0-0-vegetafhd.img
Hello i have the new statixos 5.0 android 12 rom i have chrome issues not working and need to flash an older stock rom but i don't know which one or where to find it. can anyone help?
[CLOSED][OFFICIAL] LineageOS 18.1 for the Essential Phone
Essential Phone - Your warranty is now void. - You have been warned. - Use at your own risk. Introduction: This is the Official Lineage OS 18.1 thread for the Essential Phone. Downloads: Please follow the install instructions in your...
forum.xda-developers.com
check this post, download this file https://sourceforge.net/projects/essential-static/files/ (click on the big rectangular green button on top to download) and follow the instructions
I did that and Chrome hasn't crashed since then, even after updating (I'm on LineageOS 18.1)
oh and btw, how's that Android 12 ROM, is it suitable for a daily driver? any major bugs? battery or performance issues?