Hi, I bought a Samsung super fast wireless charger(EP-P2400). The Samsung wireless charger is charging my old S7 phone and iPhone but not my Nothing phone. The charger detects my phone by showing the led indicator but does nothing. I have tried with Samsung UV Sterilizer and wireless charger and nothing phone charges wirelessly. So I don't see any issue with my phone or the charger, it's just that if I try them together, it doesn't work. Please help.
Related
I bought a QI wireless charging adapter from Ebay and installed it in my s4. I used Nokia QI wireless charging pad. However, I found my the charging was intermittent after like 5min of continuous charging and that was when the Nokia pad & my s4 both got very warm.. The phenomenon was: the screen kept coming on every 5seconds like the phone was disconnected from the power source and reconncted.
I found that, when I put s4 off from the charging pad, let phone cool down, put it back, it would work flawlessly for 5min, again charging intermittently. This bothers me, as apparently the physical charging worked for my s4. Might be the wirless charging issue related to s4 firmware?
Any inputs are welcomed.
My original charger started to do something very weird: When i plug it (original fast charger and original cable from samsung) it starts fast charging my phone (s6 Edge+) and after a few minutes sometimes it heats up a lot, stops charging and discharge all my phone (to 0%), even charging with the phone off. I've tried other wall sockets in the home, same thing; tried other cable, same thing; tried to charge other phone with it, it does the same (heats up and discharge phone). Sammy warranty doesn't cover bad chargers, does it?
PS - I have the charger since October and just i month ago he started to do this
Update: went to samsung store, charger and cable replaced for free
My friend the same happened to me, the problem is with cable it self not the charger so the solution is very simple try to find ( Nokia cable )most of Nokia cables are suitable with Samsung and even it better from the original, the short one or the tall one all the same.
Hi,
So I bought the Samsung Wireless charger stand (say fast charging) http://www.bestbuy.ca/en-CA/product...ging-stand-black-ep-ng930bbugca/10418050.aspx because it was on promo. I try with 2 device, and it never say Wireless Fast Charging.
If i just use the USB cable and plug to my phone, it say fast charging.
I already replace 1 in store, so i though it was the wireless charger the issue, but the second one, does the same.
Also the time remaining stay the same if I use the USB cable or the Wireless charger.
So my question is, am I suppose to see Wireless Fast charging ?
It is setup to ON in the Battery setting.
I try both S6 and S7 Edge.
Thanks!
yeah I was at a best buy yesterday and saw it for the first time. When I tried it out it also did not fast charge. My fast charger at home though needs the phone to be placed in a certain position for it to catch for fast charging. Its a little cumber sum but I got it down pat right now
U may have to manually turn it on. Mine turned on on its own. U can toggle on/off in battery section same place as the regular fast charge option. Either that or that wireless charger was not really "fast".
Mine does that on occasion and I have to lift the phone up and place it on the pad again in a slightly different position and then it says fast charging wirelessly. Be sure you have a quick charge power cord plugged into the pad
Sent from my SM-G935F using Tapatalk
Lately I've been having issues with my phone and charging. It started with the stock OEM charger getting steadily harder and harder to use.. so I bought an Aukey charger to replace it with and it completely refuses to work on my phone, so I tried another phone and tablet and it works great. I tried my super old Galaxy note 2 charger with a motorola usb cable from my maxx and it works fine... I then tried that usb cable on the aukey QC 2.0 charger and it won't work... tried the same cable again on my phone with the sammy charger and it worked... tried a QC 3.0 aukey wall charger and it won't work... yet I have a QC 2.0 incipio car charger. it was working with the USB moto cable I've had in my car since I got my Bionic... then it just stopped charging my phone, got a new USB and it works great now except the moto usb will work for friends, just not my phone.
I have absolutely no idea what's causing this... I thought maybe there was lint in the charging port so I took a tootpick and cleaned it out, got a small piece of lint, same thing with all the chargers. I can't find anything online, and being a tinkerer I've tried everything I can think of before asking. I'm starting to think the phone itself is having problems and the port is actually bad or there's something wrong in the software causing it to have problems with turbo or QC chargers.
any ideas?
There is a general inconsistency with this device and Quick Chargers... if you look in the Accessories area there are several threads discussing it.
Personally, I use the Aukey QC 2.0 charger for travel with an Eversame premium braided cable and it works fine, yet others use the same combination and it won't Turbo charge or in some cases charge at all.
I also face the same issue. Some USB cables work with my Moto X Style and some doesn't .
i am having an even worse issue and i am sure its a software problem, recently my moto x stopped charging using the moto charger so in the last two months i have 4 different chargers who worked for some time each now it just doesnt work at all, i have cleaned the port numerous times then it just stopped working so when the phone finally died all of a sudden it started charging but as soon as it switched to turbo mode the charge would stop and start over again. i have deduced its a software problem as once the phone tries to go to turbo charging mode it cant sustain the charge and cancels it. amphere even shows its discharging while on the charger , however if it starts charging while the phone is off with a low voltage adapter and turn on the phone once you dont remove the cable it will charge (extremely slowly but it will charge).
redtrinstar said:
i am having an even worse issue and i am sure its a software problem, recently my moto x stopped charging using the moto charger so in the last two months i have 4 different chargers who worked for some time each now it just doesnt work at all, i have cleaned the port numerous times then it just stopped working so when the phone finally died all of a sudden it started charging but as soon as it switched to turbo mode the charge would stop and start over again. i have deduced its a software problem as once the phone tries to go to turbo charging mode it cant sustain the charge and cancels it. amphere even shows its discharging while on the charger , however if it starts charging while the phone is off with a low voltage adapter and turn on the phone once you dont remove the cable it will charge (extremely slowly but it will charge).
Click to expand...
Click to collapse
FYI... There is no software problem with charging, if there was it would affecting hundreds of thousands of people. And I doubt you have 2 software problems, a bad kernel and a bad bootloader/recovery image, because 2 different things control charging when powered on and powered off.
Issue here is you likely have a high resistance connection somewhere between the USB port and the battery itself, or a bad charging circuit... It's hardware.
while i can understand where you are coming from when the phone is in factory mode (motorola customer care told me to try) its charging fine also turbo charging is working now just it doesnt recognize the sim card. it was a suggestion from Motorola customer service desk, as i live outside of the us they gave me some options to try. they said it was a software glitch where the phone may have gotten an overload from a bad connection and caused the phone to not recognize the charger. however while the phone is off this check is not performed which is why i was getting a lower amp charger to work as the phone did not have to enable the protocol that allows for quick charge/turbo charge voltages.
Like mentioned in the title, my fast wireless charging works, and when I put my phone on the pad it tells me it is fast wireless charging. However, whenever I try to use the cable directly and not wireless charging, it becomes cable charging which is incredibly slow (8-10 hours for 50%).
I have obviously checked all the simple steps. I'm using the adaptive charger, I'm using a good cable, fast charging is turned on in settings. I even tried factory reseting my phone but still no luck.
Is it possible that my charging port is loose? And if so is there any way to fix this?
The other possibility I'm thinking of is that my Europe to America convertor might be bad (I have the international version so I have to use the plug convertor) I recently lost the one that came in the box so I had to buy a new one off amazon. Are there such good things as good and bad convertors or are they all the same. And if it is the convertor, why would the wireless charging work but the cable charging not.
EDIT: I just checked plugging in an S6 to the cable and it says fast charging. Does that mean it is definitely the port on my phone?
natantantan said:
Like mentioned in the title, my fast wireless charging works, and when I put my phone on the pad it tells me it is fast wireless charging. However, whenever I try to use the cable directly and not wireless charging, it becomes cable charging which is incredibly slow (8-10 hours for 50%).
I have obviously checked all the simple steps. I'm using the adaptive charger, I'm using a good cable, fast charging is turned on in settings. I even tried factory reseting my phone but still no luck.
Is it possible that my charging port is loose? And if so is there any way to fix this?
The other possibility I'm thinking of is that my Europe to America convertor might be bad (I have the international version so I have to use the plug convertor) I recently lost the one that came in the box so I had to buy a new one off amazon. Are there such good things as good and bad convertors or are they all the same. And if it is the convertor, why would the wireless charging work but the cable charging not.
EDIT: I just checked plugging in an S6 to the cable and it says fast charging. Does that mean it is definitely the port on my phone?
Click to expand...
Click to collapse
May sound odd but have you tried unplugging and replugging the charger in over and over to see if one of those times it pops up as fast charging?
i had this problem with my Note 5 (im in the UK and note 5 was not released here so i had to buy a Russian variant and they sent with 2pin to 3pin adapter)
I don't think i ever had a fix for this other than using a different fast charger without the adapter..
However like you The official note 5 charger with adapter does work to charge my s7e fine though
so our problems seem pretty similar... Maybe buy a new fast charger that doesn't require an adapter and try that?