I mistakenly imported a very large logo.bmp on my Wisdom Smart TV and now my TV won't boot, it keep showing green and red light and won't display on the screen. My board name is LP ATM30 PB802 (N).
it has only one key on the TV which is the power button.
I will honestly appreciate your help on fixing this problem. Thanks
Related
Im sorry for posting this here but I cant post in the development forum. I did the webtop through hdmi hack. I am on 4.5.91 so I used the files provided in that section. Everything seemed to go through fine....with the exception of the missing dockprovider apk. Now when i connect the atrix to my tv via hdmi webtop option pops up. If i select it on my phone the red m will show up on both my tv and phone screen. Then the webtop interface will display on the tv however on my phone the screen dims and goes back to my regular home page with the google search bar and widgets and such. When i use my finger on the phone sreen it registers as moving the mouse cursor on the tv screen however it doesnt go to that black screen that has the two buttons on the bottom....one of which is to pull up the keyboard. So essentially i have webtop working per se but my phone wont display the black screen that is supposed to display so its not usable. I did press on the screen where the keyboard button is supposed to be and then started tapping in random spots on the screen and it was typing I just cant tell where the letters are since its not showing up on screen. Cany anyone provide any help plz.
EDIT** Using the method in this thread worked for me http://forum.xda-developers.com/showthread.php?t=1144119
Im thinking you're going to have to reinstall again, and maybe possibly your rom. The other option is to find exactly what's missing and get the files you need put on your phone.
I voided my warranty.
I just get this device yesterday, and now it is the first time to boot up !
I just found that there is no light on back or menu button !
Play with setting and change the duration but no luck
I'm going for sure to replace the device " WTF " ok, but i just want to know before nothing, does this device built in menu butyon light ? If not, then samsung must be drunk !
There is no button lights what soever. Sorry to burst your bubble, but to make the tablet cheap, they had to take out a ton of features that their other tablets have.
thanks for your quick reply, and sorry for the late thanks
well, this is really disappointment ! I didn't know this before
In fact, in my opinion they must keep the menu bottun light as the really extreamely tiny cost of it !
And then they should remove both rear and front cam as it's useless and no need for it in a tablet" what could 3 & 1 Mega cam help with btw ? "
and again,
deos the tab4 able to charge when connected to pc or not ? it's not charging ....
It would not charge for me when connected to my PC.
Hi, I was trying to reconfigure my resistive buttons to switch off the screen when driving at night. I managed to reverse the X&Y axis so I have to press in the opposite point in the screen to interface with the OS. Any advice on how to resolve this as I'm just getting more frustrated trying to navigate the menus to make the changes. Would I be better flashing the MCU firmware or the android firmware?
I had this problem before just go to factory settings and change it back
Thanks for the advice but it's difficult to get into factory settings and then what do I do, reset to default I don't see that option?
There's no default option in factory settings
U should go for touch screen settings and change x&y
If you're being difficult getting the factory settings
U can connect keyboard or mouse
That's what I did when I accidentally changed touch screen resolution...
I too am struggling to set it back to normal touch operation i even found one thing where i could see where each finger registered on the other hemisphere of the screen ... Halp me
Try this and say if it works.
In my Head Unit, thats had fixed the problem.
Marcio Abranches-The Bambi reply. I have a Shinzhen Android head stereo C80, 9.1".
I trolled countless pages looking for the solution of 'X' "Y" about face. I dont know what I did to deserve the terrible screw up. But let me say for all those who have also stumbled while stuffing around in this area that this 5 finger technique works on this model as well.
So positive feedback from me. Thanks mate...terrific.
Now the next problem is, how to make active the radio buttons on the left of screen; Home, Return, Vol+, Vol- etc......
In addition to Marcio's instruction, I have this link that takes you to a Youtube description of fixing the same issue and also goes into how to map the side buttons that also drops off.
MY REMOTE IS NOT WORKING - REMOTE TESTING
In the event that your TV is not responding to your remote, this could be because of either an issue with the remote, or the TV's I/R recipient, the accompanying test will help figure out which.
On the off chance that it is an issue with the remote, this can be settled essentially with another remote, as opposed to fixes to the TV.
To start with, if you don't mind guarantee that you have new batteries in your remote.
1) If you approach an advanced camera that has a screen, or a telephone that has a camera, turn it on and coordinate the remote at the camera's focal point. On an iPhone, if it's not too much trouble utilize the forward looking camera, the back camera won't show the light.
2) While glancing through the camera, take a stab at squeezing any of the buttons that are having issues and search for a blaze of light. The glimmer is not visible to the unaided eye, and must be seen through the camera's display.
In the event that the remote is working, there will be a blaze of light visible on the finish of the remote.
On the off chance that you see a blaze of light and the remote is as yet not working accurately, or on the off chance that you see flashes while you are not squeezing any buttons, check to ensure none of the remote's buttons are trapped.
On the off chance that the remote is seeming to work effectively (lights showing up just when you press buttons) and the TV is still not responding, there might be an issue with your TV's I/R beneficiary.
In the event that no lights are showing up, and you have tried supplanting the batteries, your remote seems, by all accounts, to be broken.
Trade remotes for your TV might be accessible on our site if your guarantee period has lapsed, on the other hand, if it's not too much trouble contact our Support Team to ask about the accessibility of a substitution remote or ex-guarantee fix.
If your sheild Android TV remote is out of warranty period visit to trust worthy team by dialing 1(866)201-2001
Hello everyone reading this!
I just acquired today a seemingly dead tab A 2019 SM-T515.
Symptoms:
No screen, no backlight
No vibration, no sound
BUT shows up on mtp when force rebooting.
Does the tablet normally vibrates when being plugged in or started?
If so, could the absence of backlight be a firmware issue?
If not, I might consider separating the screen and inspecting the connector.
The screen is mint btw, very clean and no signs of shocks apart from the edges of the tablet but I'd be surprised it being dead.
Thanks in advance!
EDIT: Device can boot in download mode (still no screen nor vibration). I'd say dead screen of bad connection, will continue forward by removing screen.
Please dear moderators, feel free to tell me if you want to remove the thread or if I'm welcomed to keep updating it for future researchs of fellow owners.
Afaik it doesn't vibrate or do a sound