k1max rk3318 flashing red light.
Have already used multiple chargers so can almost rule out that not being the problem. The only thing the box still does is flashing a red light that is slightly to the right of the display. i have tried to -short cutte -android tool-factory tool-but nothing helps. even i have not yet managed to connect between my pc and the android box. special cable 2.0 bought for connect but to no avail. maybe i should just give up because it is a waste of my time, but still would like to share and talk about it.
regards Marvin
Related
Hello All,
It has been a while since my last post, but I need help once again.
My Magician has taken a turn for the worse. The power connector has broken off and I had it repaired by a great company.
My issue is now the device is coming up with multiple colors on the display (primarily Orange, Light Blue, and White) vertically). This is different from the color test where it is Red, Blue, Green.
When I attempt to load the ROM all I get are connection issues on the MaUpgradeUt. I am not positive I have gotten the device into the correct mode as the display is not working. Speaking of displays, the company that attempted to repair my device did try a new screen and experienced the same results. Also they placed the original screen on a new Magician and the screen worked great.
Does anyone have any suggestions? I would love to have my Magician back.
Thank you,
John
John,
Try maupgradeut_noid.exe from the ftp, instead of maupgradeut.exe. It may help. I don't advice you to run down the battery cause some are complaining that it won't charge without OS. BTW does the led come up constantly when you plug in the power or usb? If so you probably still got an OS.
Guess you know how to put it into bootloader, just try & hold for a second or 10 & connect usb & try to flash with the no_id. Must be difficult without confirmations on your screen, but a SD flash will be even harder.
Hope this helps, otherwise I see only one solution left: have it serviced again :-(
Regards, M
Thank you for the info.
I tried the new MaUpgradeUt_noID but now I am getting the error on the PC saying Error 150: ROM Upgrade Utility Error.
The device appears to be fully functional with the exception of the screen.
John
Did you ran the noid once or twice. It needs to be running twice, my guess is that in the first run it alters the RUU file (adds the first line devicecheck or something) & the second it really upgrades.
Was the screen problem present before you had the power-connector serviced? Maybe something is loose or broken now...
Cheers, M
Hello,
Hope someone could help a new guy with a Sprint 6800. A couple weeks ago I noticed the blue led switched on overnight and has stayed on. At the time the phone was running the latest stock sprint rom.
I did the usual troubleshooting - hard reset, clean wipe, pulled battery, ran it w/o battery, and made sure no apps where affecting. I'm think its a hardware problem since when you pull the battery and install it - the led stays on even before WM6 loads. Took it to Sprint and got a bit of a run around - they want to send it in for repair for 2-3 weeks, opposed to replacing it (I have the protection plan). I can't live without it for that long so I'm dealing with it right now.
I did try a few other things - some apps to power leds off - they work great with the green, but not the blue. I also tried reflashing it with other user built roms, upgrading & downgrading he radio, etc with the hopes of triggering it to off or changing its state.
Anyone ever have this happen or know of a simple solution?
Thanks so much, anything is appreciated!
Tom
umm do you have blue tooth turned on?
even with BT on the LED should flash intermittantly, not be on all the time
i agree it sounds like a hardware issue, you shoudl be able to tell sprint you cant be without your phone for that long, they might give you a loaner (i had this done once with VZW)
Comm manager button on the side, under power button. Make sure bluetooth has an x on it.
The phone was in my poscket, i took it out and what i saw was a blue led, i restarted it and it worked, still curious to know how could this happen. I am running zeroxd any linux guy know that. maybe it can fix bricked devices like how led came up automatically
I've been using the DFT rom V2 for a while now, had not conected my surround to the computer for about a week, now my device is not recognized by mi pc, not on flashing mode (three color stripes) nor while running, not even if i dont let it go to lockscreen. Already tried updating the USB drivers, which a could post if anybody needed them, nut i have them up to date... could some body help me please!!!!
You should try cleaning the USB connector (slot) with some kind of cleaning agent and maybe a soft brush to get rid of dust/dirt etc.
That worked for me the last time my device was not recognized. (I actually discovered this because I use an USB-hub with device-connection light indicators, and it would not light up [correctly] when plugging it in - meaning the connection was not very good)
Hey all
My Defy (MB525) has suddenly stopped charging, neither does it notice when its connected to the PC
However, when I power off the phone and then plug in the cable it notices, a little white light comes on and the phone powers up.
So the USB port must work, at least a little bit.
some facts till now..
:good:I use cyanogenmod 10 2ndboot for more than 6 months, thats not something new....
So.. What have I tried so far
- I tried several different USB cables
- I tried connect it to more than one computer
- I tried connect it to my car charger
- I've change my rom from cm10 to cm 10.1 and even cm10.2, at the end i got back the cm10- 2ndboot
(after all, 10 is the best rom for MB525)
I''ve done it as it should be done, I wiped data/factory reset, I wiped cach and I wipe dalvik..:angel:
- I even opened the phone to see if the usb connector is connected to the board, seems fine to me but i don't really know anything about electricity and stuff..
what more can I do? it must work somehow, other ways there wasn't a white led when concting the device to usb while it off and
one more thing is the fact that it turning back on.
The last thing when i get into the bootloader it recognaized the cable
"ok to program
transfer mode usb"
is there anything that I can try inside CWM Recovery 5.0.3.1 or Team Win rocovery boot menu ?
the only thing I havent done yet is to wipe it all complitly and install Froyo (Android 2.2 rom) from the start.
any suggestions?
Shani
Seems like I challenged all of you
I've been challenged myself to :laugh:
Any way, my HTC ONE develoer eddition (64GB) shuld be here in less than two weeks so I don't realy care about the defy....
I just wanted to solve the case.. that's the kind of person that I am
Seems like a hardware failure, maybe the pins are loose. You can try usb mount from twrp, but based on your observations i dont think that would work. Congrats on your new phone btw
thekguy said:
Seems like a hardware failure, maybe the pins are loose. You can try usb mount from twrp, but based on your observations i dont think that would work. Congrats on your new phone btw
Click to expand...
Click to collapse
:crying:
to tell the truth, the menu and home hardware keys as stopped work too....
but there still have a vibrate willie touching it..
i'll wipe and format it all later and start from the very bigining I got to make it stay alive for the next two weeks!!:laugh: