Related
This is the clockworkmod recovery ported from nexus 5. I haven't tested everything yet but things do seem to work. It uses the stock kernel.
Instructions to flash:
(Make sure you are rooted prior to this.)
1. Install Recovery Tools from above link.
2. You will get a prompt to backup your stock recovery. DO IT.
3. Download recovery file from here and copy it to your phone.
4.Select 'Flash Recovery' option.
5. Select 'from storage' and select it from your phone.
6. flash it.
You're done!
LINK TO STOCK GiONEE RECOVERY: https://www.mediafire.com/?uwlp6ohz2hmunk1
OTHER VERSIONS
6.0.4.4 : http://d-h.st/dXx
NOTE: The sdcard won't mount on this version. But you can use sideload and USB-OTG.
mine!
Great job
Thanks Ravi bhai love your work and effort man
Thanks a lot
hope to see more dev from ur side
Hi i have a question my phone is stuck at bootloop and i dont know how to install cwm. how am i supposed to instal cwm and flash original firmware ?
How to backup my android with the recovery ?
hello, I managed to install the recovery but I can not seem to make a backup of the system because the laptop does not have SD card port.
Thanks for help me )
Help
DeceptiPrime said:
Hi i have a question my phone is stuck at bootloop and i dont know how to install cwm. how am i supposed to instal cwm and flash original firmware ?
Click to expand...
Click to collapse
Did you fix the bootloop problem? I too got stuck can you help me?
Gione f103
Well, I know there are lot of helpful guides out there on how to install cyanogenmod but not everybody gets what he's looking for. I recently searched a lot of sites, forums, and lot of xda posts for installing cyanogenmod 11 M7. And i finally found few posts that helped me.
With these posts one can get an idea about how to flash a kernel, how to back up the data, and how to flash a custom ROM on a S2. Pretty helpful...isn't it? All thanks to these guys - @avirk , @-Grift- @banjara @Vivek_Neel @Phil3759 .
The steps might fit correct for some.. where there might be some variations for others. I myself didn't find some steps from the guide i followed while backing up my data. But still.. i went for it. And it was good enuf.
So here are the steps that i followed... n i think which might help some one like me out there.
First of all. as they say.. If anything goes wrong. I'm not responsible. If everything goes right.. well..Thank you then.
1) Downloads required
- << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
- CWM 6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST) recovery
- cm-11-20140609-SNAPSHOT-M7-i9100.zip
- Gapps
2) Copy << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> into external storage.
3) Boot into stock recovery (volume up+home+power)
4) Select "apply update from external storage".
5) Now select the << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> file you copied in previous step
--- Rooted! ---
6) Reboot into recovery select option “Backup and Restore”
7) Select the option “Advance Backup and Restore”
8) Select the “Custom Backup Job”. There you have tick the “Preload” folder
9) scroll down and “Start custom Backup job” And then it will ask where you want to store the backup on you “Internal/External Storage”
10) After selecting the storage path it will start the backup process. When it finished you are ready to install the new ROM.
- One thing to be noted. I did not find the ‘Advanced backup and restore’ option while I was doing it. So I just took the normal back up. For a complete guide on backup refer to THIS POST
11) Boot into recovery (Do not boot into OS)
12) Select "apply update from external storage".
13) Now select the 6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST) recovery file that was copied on your external storage
14) CWM 6.0.4.7 now installed.
15) Boot into recovery (Do not boot into OS)
16) Wipe data/factory reset
17) Wipe cache
18) Wipe dalvik cache from advanced menu.
19) Select "apply update from external storage".
20) cm-11-20140609-SNAPSHOT-M7-i9100.zip
21) It will get installed.
22) Go back to recovery and Select "apply update from external storage".
23) Select the Gapps .zip file.
24) Reboot to OS.
And you're done!
Where are /format system and /format preload??? If you are on 4.1.2 stock you need to do a full wipe.
Flash latest philz kernel in stock recovery, then reboot into recovery again(hold 3 buttons) and flash latest Philz CWM Touch recovery(6.0.4.8!). Then do a full wipe and flash a custom rom and gapps.
Послато са GT-I9100 уз помоћ Тапатока
Zile995 said:
Where are /format system and /format preload??? If you are on 4.1.2 stock you need to do a full wipe.
Flash latest philz kernel in stock recovery, then reboot into recovery again(hold 3 buttons) and flash latest Philz CWM Touch recovery(6.0.4.8!). Then do a full wipe and flash a custom rom and gapps.
Послато са GT-I9100 уз помоћ Тапатока
Click to expand...
Click to collapse
Well.. i did factory, cache and dalvik.. :\ and till now everything's fine..
But you might be correct. I used the guide that has steps for backup and all...
SubraiSambary said:
But you might be correct. I used the guide that has steps for backup and all...
Click to expand...
Click to collapse
Please use the rom nuke script it is better. It will clean your phone and prepare for new rom. Then everyting will work fine.
Послато са GT-I9100 уз помоћ Тапатока
Zile995 said:
Please use the rom nuke script it is better. It will clean your phone and prepare for new rom. Then everyting will work fine.
Послато са GT-I9100 уз помоћ Тапатока
Click to expand...
Click to collapse
That sounds nice.. can you provide the link?
nice guide @SubraiSambary , keep up the good work
shriom_manerker said:
nice guide @SubraiSambary , keep up the good work
Click to expand...
Click to collapse
Thanks buddy
SubraiSambary said:
Well.. i did factory, cache and dalvik.. :\ and till now everything's fine..
But you might be correct. I used the guide that has steps for backup and all...
Click to expand...
Click to collapse
I Agree with Zile.
I installed Cyano with similar steps and I finished with an useless phone with system partition full.
format system and preload are mandatory moving from stock to cyano in my opinion.
FandangoL said:
I Agree with Zile.
I installed Cyano with similar steps and I finished with an useless phone with system partition full.
format system and preload are mandatory moving from stock to cyano in my opinion.
Click to expand...
Click to collapse
What happened with me was.. i didn't find the preload thing while making my backup.
So i missed some steps from the guide which i followed. I'll be trying it again when cm11 m8 will be out.
May be that time i can find the preload section.
SubraiSambary said:
Well, I know there are lot of helpful guides out there on how to install cyanogenmod but not everybody gets what he's looking for. I recently searched a lot of sites, forums, and lot of xda posts for installing cyanogenmod 11 M7. And i finally found few posts that helped me.
With these posts one can get an idea about how to flash a kernel, how to back up the data, and how to flash a custom ROM on a S2. Pretty helpful...isn't it? All thanks to these guys - @avirk , @-Grift- @banjara @Vivek_Neel @Phil3759 .
The steps might fit correct for some.. where there might be some variations for others. I myself didn't find some steps from the guide i followed while backing up my data. But still.. i went for it. And it was good enuf.
So here are the steps that i followed... n i think which might help some one like me out there.
First of all. as they say.. If anything goes wrong. I'm not responsible. If everything goes right.. well..Thank you then.
1) Downloads required
- << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
- CWM 6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST) recovery
- cm-11-20140609-SNAPSHOT-M7-i9100.zip
- Gapps
2) Copy << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> into external storage.
3) Boot into stock recovery (volume up+home+power)
4) Select "apply update from external storage".
5) Now select the << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> file you copied in previous step
--- Rooted! ---
6) Reboot into recovery select option “Backup and Restore”
7) Select the option “Advance Backup and Restore”
8) Select the “Custom Backup Job”. There you have tick the “Preload” folder
9) scroll down and “Start custom Backup job” And then it will ask where you want to store the backup on you “Internal/External Storage”
10) After selecting the storage path it will start the backup process. When it finished you are ready to install the new ROM.
- One thing to be noted. I did not find the ‘Advanced backup and restore’ option while I was doing it. So I just took the normal back up. For a complete guide on backup refer to THIS POST
11) Boot into recovery (Do not boot into OS)
12) Select "apply update from external storage".
13) Now select the 6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST) recovery file that was copied on your external storage
14) CWM 6.0.4.7 now installed.
15) Boot into recovery (Do not boot into OS)
16) Wipe data/factory reset
17) Wipe cache
18) Wipe dalvik cache from advanced menu.
19) Select "apply update from external storage".
20) cm-11-20140609-SNAPSHOT-M7-i9100.zip
21) It will get installed.
22) Go back to recovery and Select "apply update from external storage".
23) Select the Gapps .zip file.
24) Reboot to OS.
And you're done!
Click to expand...
Click to collapse
Where's the GApps.zip file? There's no link provided.
ranzzit said:
Where's the GApps.zip file? There's no link provided.
Click to expand...
Click to collapse
I left the choice to the readers.
Anyways... You can find gapps in the following threads :
http://forum.xda-developers.com/gal...wip-cyanogenmod-11-unnofficial-build-t2523604
http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
http://forum.xda-developers.com/showthread.php?t=2397942
http://forum.xda-developers.com/showthread.php?t=2530929
And you might find some links on google search too.
Just be sure you download the gapps for Kitkat 4.4.x. This will avoid problems
Go ahead and take your pick
SubraiSambary said:
I left the choice to the readers.
Anyways... You can find gapps in the following threads :
http://forum.xda-developers.com/gal...wip-cyanogenmod-11-unnofficial-build-t2523604
http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
http://forum.xda-developers.com/showthread.php?t=2397942
http://forum.xda-developers.com/showthread.php?t=2530929
And you might find some links on google search too.
Just be sure you download the gapps for Kitkat 4.4.x. This will avoid problems
Go ahead and take your pick
Click to expand...
Click to collapse
Thanks a ton mate You rock. Much appreciated.
ranzzit said:
Thanks a ton mate You rock. Much appreciated.
Click to expand...
Click to collapse
hehe. You're welcome buddy!
SubraiSambary said:
I left the choice to the readers.
Anyways... You can find gapps in the following threads :
http://forum.xda-developers.com/gal...wip-cyanogenmod-11-unnofficial-build-t2523604
http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
http://forum.xda-developers.com/showthread.php?t=2397942
http://forum.xda-developers.com/showthread.php?t=2530929
And you might find some links on google search too.
Just be sure you download the gapps for Kitkat 4.4.x. This will avoid problems
Go ahead and take your pick
Click to expand...
Click to collapse
You can link your above post for the link to the GApps section in the OP, then you'll not get other questions as to the link for GApps.... Also, as said by @Zile995, it is better if you include formatting system and preload too in your guide as not doing so may cause issues and doing so is the best way to full wipe your system for fresh flashing without issues...
And yes...Great work.... :good:
hi
i did every step of your procedures (more times) and the result is the same!!
when the phone starts all the google processes crash and it is impossible to do anything...
If I install the Cyano 10.1 everything is fine...
What can I do????
Any tried this on SHW-M250K model? Is it even compatible?
Sent from my iPhone using Tapatalk
Can I boot into system after installing 03.06.2013 - PhilZ-cwm6 v5.06.1 and later install new rom?
Would any of you guys be able to help me (a rookie when it comes to this) with these Q's in my thread about CyanogenMod?
This thread: http://forum.xda-developers.com/galaxy-s2/help/stock-rom-to-cyanogenmod-import-sms-t2903491
Btw, isn't it easiest to acquire CyanogenMod by using the CyanogenMod Installler for the i9100?
http://beta.download.cyanogenmod.org/install
Bizius said:
hi
i did every step of your procedures (more times) and the result is the same!!
when the phone starts all the google processes crash and it is impossible to do anything...
If I install the Cyano 10.1 everything is fine...
What can I do????
Click to expand...
Click to collapse
Never had this problem bud. I installed M9 in the same way but google process failures were never encountered.
I'm afraid i might not be of any use here but would suggest one thing that stick to 10.1 till u find an answer to this.
And regarding your problem..... These guys( @avirk , @banjara , @-Grift- , @Vivek_Neel , @Phil3759 ) might be able to help you out. They helped me too.
bums85 said:
Can I boot into system after installing 03.06.2013 - PhilZ-cwm6 v5.06.1 and later install new rom?
Click to expand...
Click to collapse
I guess it should be ok to boot into the system because you'd be installing the recovery and if the recovery is compatible with the ROM and won't give any problem then you can. But still.. always take a second opinion before you try because... even I'm a learner.
Q&A for [RECOVERY][All-F2FS] TWRP-2.7.0.0 with All-F2FS support [11/03/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][All-F2FS] TWRP-2.7.0.0 with All-F2FS support [11/03/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Following this procedure my data partition is still in ext4. Maybe because i have used the last TWRP 2.8.1.0 (f2fs should be supported) and not the modified one? Solutions? Thanks
I Think I Messed Up
I was trying to do this, but the ROM I was using failed to work. Stupidly, I wiped the device completely to see if re-copying the .zip would fix anything. The problem is, I now have no bootable OS's, so I cannot copy anything to the Nexus 7 (2012 model). I do have TWRP 2.6.3.1 installed, if that helps at all. Any help would be greatly appreciated.
I actually had one idea, so please let me know if it would work. I know that the Nexus 7 can read USB flash drives through the help of a cable that connects to the normal microSD port. Would that help me to resolve my issue? If so, I could buy one and have it within a few days.
Nevermind, I was able to fix it on my own by using the Android Dev tools (fastboot specifically).
Can someone please advise? I accidentally deleted all of my data and got stuck the Google loading screen. I'm trying to adb sideload the rom(provided in op) to reflash and I get stuck at "Starting adb sideload feature". Any advise would appreciated!
Hi, am new to F2FS and rarely stray from the norm so hoping I can find the answers here.
Current setup is 4.4.4 (Spirt ROM) as main with a multiboot of 4.4.3 (CM10) to play PvZ2.on my tilipia with stock kernals.
Using latest TWRP 2.8.2.0 is it possible and as simple as:
-Convert partitions to F2FS within TWRP
-Flash 4.4.4 as main ROM
-Flash 4.4.3 as second ROM
Or do you still have to convert each ROM zip to F2FS?
Is everything fully F2FS compatible now TWRP 2.8 has F2FS or is there anything else that needs flashing?
Is there any windows script to convert the ROMs or is it only the app from the store? (found a script in the grouper thread but didnt mention tilipta but still reading)
Sorry for the questions, just making sure I dont mess up. F2FS sound like it will give quite a boost!
exeleon said:
Can someone please advise? I accidentally deleted all of my data and got stuck the Google loading screen. I'm trying to adb sideload the rom(provided in op) to reflash and I get stuck at "Starting adb sideload feature". Any advise would appreciated!
Click to expand...
Click to collapse
Have you tried reformatting all partitions back to ext, reboot recovery then adb sideload?
Code:
adb sideload path\to\rom.zip
Ive done the accidental delete several times and this always got me a ROM back up and running before transferring all my data back
Dude360 said:
Hi, am new to F2FS and rarely stray from the norm so hoping I can find the answers here.
Current setup is 4.4.4 (Spirt ROM) as main with a multiboot of 4.4.3 (CM10) to play PvZ2.on my tilipia with stock kernals.
Using latest TWRP 2.8.2.0 is it possible and as simple as:
-Convert partitions to F2FS within TWRP
-Flash 4.4.4 as main ROM
-Flash 4.4.3 as second ROM
Or do you still have to convert each ROM zip to F2FS?
Is everything fully F2FS compatible now TWRP 2.8 has F2FS or is there anything else that needs flashing?
Is there any windows script to convert the ROMs or is it only the app from the store? (found a script in the grouper thread but didnt mention tilipta but still reading)
Sorry for the questions, just making sure I dont mess up. F2FS sound like it will give quite a boost!
Have you tried reformatting all partitions back to ext, reboot recovery then adb sideload?
Code:
adb sideload path\to\rom.zip
Ive done the accidental delete several times and this always got me a ROM back up and running before transferring all my data back
Click to expand...
Click to collapse
Hey thanks for the reply. I actually got back up and running late last night by sideloading a different F2FS rom. For some reason the ROM suggested in the OP won't boot on my n7.
Commands Please
Great instructions!!!!... What are the commands used to execute each step?
•Copy a ROM with "All-F2FS" support to your N7
•Copy GApps to your N7
•Copy FormatPartitions.zip to your N7
•Reboot in bootloader
•Flash this recovery with Fastboot (Maybe Flashify works too)
•Reboot in new recovery
•Flash FormatPartitions.zip
•Reboot recovery (It's needed for some reasons..)
•Flash ROM
•Flash GApps
•Go to Wipe Menu and Format Data (Not a simple wipe)
•Reboot
•Done.
For example:
•Flash this recovery with Fastboot (Maybe Flashify works too)
Type fastboot flash recovery AllF2FS.img
@exeleon, after you format data, will not ask for password.
---------- Post added at 01:59 AM ---------- Previous post was at 01:54 AM ----------
ExtremeAthlete said:
Great instructions!!!!... What are the commands used to execute each step?
For example:
•Flash this recovery with Fastboot (Maybe Flashify works too)
Type fastboot flash recovery AllF2FS.img
Click to expand...
Click to collapse
Use Nexus Root Toolkit, connect to device and flash the recovery image. After that, for the remaining steps, you need to use the recovery soft.
FLONE said:
@exeleon, after you format data, will not ask for password.
---------- Post added at 01:59 AM ---------- Previous post was at 01:54 AM ----------
Use Nexus Root Toolkit, connect to device and flash the recovery image. After that, for the remaining steps, you need to use the recovery soft.
Click to expand...
Click to collapse
yes, it did ask for a password once I got it to boot up. Hold down the power button until your n7 turns off, boot back into recovery and factory reset, clear caches and reboot and you should be fine... worked for me! let us know how it goes.
Wich is the link for 2.8.4.1 with F2FS?
Welcome to the NOOB Friendly GUIDE to DUAL BOOT Lollipop with KitKat/JellyBean Roms on Samsung Galaxy S2!!
We have been fortunate enough to have 2 Working Lollipop Rom's (CM 12 and Omni 5.0) so I present to you the Guide on how to Dual Boot them with Kitkat/JB ROMs
Prerequisites :
1) Need Atleast 2.5 GB free on Internal Storage
2) Download the 1st Rom( LOLLIPOP - Primary Rom) and save it on any storage on your phone
3) Download Dorimanx Test Kernel v10.44.v004 from Here - http://dorimanx.casoncia.org/V10-MA...COMP-mv3-[10-30]-[29-09]-JB-SGII-PWR-CORE.zip
4) Download the 2nd Rom (Kitkat/JB - Secondary Rom) and save it on any storage on your phone
Steps :
1)Make sure you are on a Lollipop Compatible Recovery
2) Flash your Lollipop ROM (along with GAPPS etc.) you want as your Primary ROM
3) Reboot and check weather the ROM is working fine.
4) Reboot to Recovery
5) Flash Dorimanx v10.44.x004 Kernel you downloaded earlier
6) Go to Reboot Recovery
7) Go to dual boot options in new CWM and select Wipe 2nd ROM data/cache (takes 5-10 minutes)
8) Then select Wipe 2nd ROM dalvik-cache
9) After that Install 2nd ROM from Internal SD card or External SD card and flash the 2nd ROM (Kitkat/JB).
10) Reboot System and Boot to Secondary ROM (Press HOME button on DualBoot Screen)
NOTE : -Now you have both ROM's Installed but for now only 2nd ROM will boot. To see how to boot Lollipop ROM see next post
PLEASE HIT THE THANKS BUTTON :good:
Checkout my other thread for Kitkat/JB Roms Dualboot
Credits :
@nik60 for his thread
@eskriminal and @dorimanx for Kernel
@Troubadour666 for Helping Out/Patches
And any others i forgot to mention
Boot to Lollipop Rom :
1) Download and Copy the latest Apolo Kernel Lollipop Version to your phone internal storage
2) Reboot to recovery from your Kitkat/JB ROM
3) In CWM Recovery flash the Apolo Kernel
4)Reboot System and Enjoy your Lollipop ROM
Note : You will have to Repeat these steps everytime you want to change from Kitkat/JB ROM to Lollipop ROM
Boot to Kitkat/JB ROM :
1)Boot into Recovery
2)Flash the Dorimanx Kernel again and Reboot System to boot to Kitkat/JB ROM
Note : You will have to repeat these steps everytime you want to change from Lollipop to Kitkat/JB ROM
reserved
LOL
again, dualbooting thread
thanks.
Troubadour666 said:
LOL
again, dualbooting thread
thanks.
Click to expand...
Click to collapse
I didnt want to make the old thread to much full..people will get confused...so i made another thread specifically for Lollipop.. I am sure this will help a lot of users
video review about dualboot
sory, its not branch 10 i used from DorimanX builds, its branch 8, but for ppl, result will be same as describe in OP.
when i made this review, i never though someone will make a thread
link to download this personal omni rom with gapps inside used in video :
omni-5.0-20141202-i9100-HOMEMADE-GAPPS_inside.zip - 267.19 MB
thanks
Omni 5.0 with gapps,it's working? Thanks
Sent from my GT-I9100 using XDA Premium 4 mobile app
Yakap said:
Omni 5.0 with gapps,it's working? Thanks
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://d-h.st/gIf
these gapps work
tip for dualbooters
Hi,
try its a test , i assume you know what you do with your device, if you dualboot, you know that !
For this tweak, on your good 2nd rom , install Nandroid Manager from Store :
https://play.google.com/store/apps/details?id=com.h3r3t1c.bkrestore
tweak details:
if you have a good running lollipop on 1rst rom, then flash your DorimanX kernel with TWRP or ODIN, reboot DorimanX recovery and using it, make a nandroid of your 1rst lollipop rom.
- NOW, with DorimanX kernel, reboot and run your KitKat or JB 2nd rom and ,
- copy nandroid backup from clockworkmod folder on device (int or ext card) to PC ("omni-02122014-2014-12-02.19.02.55" for example) .
- from this nandroid, make an another safe copy in another folder of your PC.
- from folder named "test-omni-02122014-2014-12-02.19.02.55"
- with 7zip , open system.ext4.tar.a and delete all things except build.prop in /system/. close system.ext4.tar.a.
- with 7zip , open data.ext4.tar.a and
in data/data , delete :
com.andrew.apollo
com.bel.android.dspmanager
com.svox.pico
jp.co.omronsoft.openwnn
net.nurik.roman.dashclock
all folder with :
org.omnirom.*
com.android.*
com.cyanogenmod.*
delete contents in data/dalvik-cache/*
delete contents in data/users/*
you can try to clean some other folders if you want.
then close data.ext4.tar.a
- now, copy "test-omni-02122014-2014-12-02.19.02.55" from PC to your device, in same folder as original.
- reboot your 2nd rom again
- run nandroid manager and find your "test-omni-02122014-2014-12-02.19.02.55" in list of backups and tick it
- launch MD5 buton on screen and choose "generate MD5". When done, reboot recovery.
wait for new lollipop build.......
when , one day, one lollipop build appears (CM12 ALPHA, OMNI or CodeRom), then
- with DorimanX recovery, restore the modified nandroid backup "test-omni-02122014-2014-12-02.19.02.55" on your 1rst rom.
- then , go in mount and storage Menu, follow "mount /system" and go to "format system" partition.
- flash the NEW LOLLIPOP Build ROM now and enjoy to find your DATA APPs from precedent LOLLIPOP BUILD INSTALLED.
thanks
Guys if you want i can make Omni Recovery file for you guys...just someone send me the boot.img from latest build...im using bugaaty build
koolkunz said:
Guys if you want i can make Omni Recovery file for you guys...just someone send me the boot.img from latest build...im using bugaaty build
Click to expand...
Click to collapse
take my friend, no flashable
boot.img-5.0-20141202-i9100-HOMEMADE.rar - 5.86 MB
So all those using Omni latest build(20141202) by asimovi..use these 2 files :
CWM Flasher : http://d-h.st/qD6
Omni Recovery : http://d-h.st/rdH
YOU DO NOT NEED TO EDIT THE FILES FOR 20141202 OMNI 5.0 BUILD!!
have also added files for Bugatty build...check the 2nd post of the thread
Tried omni rom 5.0 internal storage not work, any help, tnx in adv.
Yakap said:
Tried omni rom 5.0 internal storage not work, any help, tnx in adv.
Click to expand...
Click to collapse
that is problem of rom by asimovi...download the build by bugatty
The guide has been updated and is now working for all Lollipop roms...even CM12 now
Now the method is very simple...everything can be done on phone...no need to copy replace files in winrar etc
koolkunz said:
So all those using Omni latest build(20141202) by asimovi..use these 2 files :
CWM Flasher : http://d-h.st/qD6
Omni Recovery : http://d-h.st/rdH
YOU DO NOT NEED TO EDIT THE FILES FOR 20141202 OMNI 5.0 BUILD!!
Click to expand...
Click to collapse
Will this work on 5.0.1 build? As the only way I can dual boot is if I backup l rom when I change from kk I have to restore l.
insigma28 said:
Will this work on 5.0.1 build? As the only way I can dual boot is if I backup l rom when I change from kk I have to restore l.
Click to expand...
Click to collapse
Yes it will....
Always boot into recovery when you change the rom?
Yakap said:
Always boot into recovery when you change the rom?
Click to expand...
Click to collapse
you need to boot into recovery to flash the respective kernels if you want to change roms
I'll start from the beginning, as if you had just bought the phone. Custom 4.2, 4.3, 4.4 should also be fine.
0) Update to last official 4.1.2 JB to avoid any oddity with older android versions (such has SuperBrick bug)
1) Root the phone if you didn't already
2) Backup (if needed):
programs with Titanium
messages with SMS Backup & Restore
EFS partition
3) Move all your data and backups to external storage (SdCard, USB OTG, computer)
Repartition (from recovery)
Install a decent recovery (TWRP is also good)
Boot into recovery and flash one of the provided zips. Personally I used the one you can find in the bottom of this post.
Wipe Cache, Dalvik Cache, Data, emmc (Internal Storage) and System
Repartition (from Odin)
Download Odin 1.85 (drivers)
Download 768 MB small preload .pits. I personally use the 6GB version but de gustibus
Download last tar.md5 of PhilZ Touch recovery ¹
Open Odin, put the PIT file in the namesake and the kernel in PDA
Press start and wait.
Boot into recovery and enter make_ext4fs /dev/block/mmcblk0p12 command in adb shell
4) Download latest TRIM-FPBug kernel by Lanchon for CM12.1 on i9100²
5) Flash CM 12.1 with the same build number
6) Flash the previously downloaded kernel and gapps (avoid anything above mini)
7) (optional) Update to latest baseband
8) (optional) After first boot, force TRIMming
doesn't work results in brick. but recoverable.
Thanks!
Only one question,
...
4) Latest TRIM-FPBug kernel by Lanchon for CM12.1 on i9100
- Found Kernel-Lanchon-TRIM-FPBug-20150824-cm-12.1-i9100.zip
5) Flash CM 12.1 With the same build number
- I have not found the same build, will work with cm-12.1-20150831-NIGHTLY-i9100.zip build?
...
Thanks!
Best Regards.
@mirhl, please, can you help me?
Thnks.
slybunda said:
doesn't work results in brick. but recoverable.
Click to expand...
Click to collapse
What?
Can you elaborate?
Jubri said:
Thanks!
Only one question,
...
4) Latest TRIM-FPBug kernel by Lanchon for CM12.1 on i9100
- Found Kernel-Lanchon-TRIM-FPBug-20150824-cm-12.1-i9100.zip
5) Flash CM 12.1 With the same build number
- I have not found the same build, will work with cm-12.1-20150831-NIGHTLY-i9100.zip build?
...
Thanks!
Best Regards.
Click to expand...
Click to collapse
Oh.. sorry. XDA didn't automatically subscribed me to the thread.
I see the problem.. and well, I don't know the answer.
I guess I overestimated Lanchon capability to keep up with new nightlies.
Couldn't you try regardless?
I mean, if it doesn't work you just need to reflash the original rom zip
Thanks @mirhl, I'll try tomorrow.
:good:
I have a i9100T (i777) motherboard with Lanchon CrossKernel and now I installed CM 12.1 for i9100.
How can I replace the Cyanogen Recovery with the CWM? I also saw a I9100T motherboard but now it show on boot i9100 logo, that CWM should I put ? That for i9100 or I9100T ? Thank you