Database Users

Can anyone share a dump folder of .ops file? (python)

*EDIT 05-24
I had a problem where I would get stuck even after using MSMDOWNLOADTOOL completely. With the help of great minds,
#fullofhell #Dark Nightmare #Scott and frankly a god #Eliminater74 I could fix the phone completely. I am heading for modem work, which put me into this situation.
As of this point, I cannot find any misbehavior but I am quite new to this, so I can be deadly wrong. (Well but then, sensors are fine, calls , texts, data, wifi is working just fine. I don't know what else to check!)
I know as a fact that what happened to me is not really that rare (although it is quite rare, it happened before as well.)
So I was about to share how I fixed it but decided not because what I did was so out of experimental and I frankly have no idea if the same would work for others.
Tbh, if you are in the same position as I am, go ahead and contact the Oneplus service team. I did what I did only because I had to, I am Korean, and couldn't get it fixed.
If anyone, comes to this point and has absolutely no way to get it fixed, I will be glad to help,
(only if that person agrees that there is more chance to totally destroy it then fixing it XD.)
Again, Thank you so much Scott, dark nightmare. What you guys shared with me saved a bunch of time and you guys are what the forum truely needs!
P.S, Still couldn't find the moded MSMdownload tool. What can you recall what functions it had? Maybe enabled engineer mode?

I can't assist with your dump file, I'm just curious though how exactly did you brick your device?

Pain-N-Panic said:
I can't assist with your dump file, I'm just curious though how exactly did you brick your device?
Click to expand...
Click to collapse
Although it's pure stupidity, I guess it's worth sharing. I was messing around with the modem and somehow somewhere I broke proximity sensor.
So, I used fastboot flash tools including critical partitions. Which is the same process shared by amt911 "https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145". Once I was done with flashing, I could not reboot. Here, I could have just side load or try to find other way out but I decided to use msm tool, which locked my oem.
basically, I think it's critical partition that causes un-recoverable boot-loop to some of us. That is not fixed by msmdownloadtool for now.
Which, I am curious, do you think msm-download tool will wipe and flash every partitions? From what I searched so far, everyone seems to agree that msm tool will flash every partitions including the critical parts (which is not exactly true because I know for a fact it doesn't wipe out efs partition). If not, do you think there is a way to force it?
Thank you for your interest though! I am going quite sad and mad alone here!

Somehowko said:
Although it's pure stupidity, I guess it's worth sharing. I was messing around with the modem and somehow somewhere I broke proximity sensor.
So, I used fastboot flash tools including critical partitions. Which is the same process shared by amt911 "https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145". Once I was done with flashing, I could not reboot. Here, I could have just side load or try to find other way out but I decided to use msm tool, which locked my oem.
basically, I think it's critical partition that causes un-recoverable boot-loop to some of us. That is not fixed by msmdownloadtool for now.
Which, I am curious, do you think msm-download tool will wipe and flash every partitions? From what I searched so far, everyone seems to agree that msm tool will flash every partitions including the critical parts (which is not exactly true because I know for a fact it doesn't wipe out efs partition). If not, do you think there is a way to force it?
Thank you for your interest though! I am going quite sad and mad alone here!
Click to expand...
Click to collapse
Damn man, sorry to hear that. I've never had to mess with msm tool, thankfully. The fact that it locks the bootloader kind of scares me. From what I've read about the tool it does sound like it wipes/flashes all partitions including critical.
Are you able to unlock the BL in fastboot mode using the command?

Pain-N-Panic said:
Damn man, sorry to hear that. I've never had to mess with msm tool, thankfully. The fact that it locks the bootloader kind of scares me. From what I've read about the tool it does sound like it wipes/flashes all partitions including critical.
Are you able to unlock the BL in fastboot mode using the command?
Click to expand...
Click to collapse
As the bootloader is locked and I cannot boot, I am can't put enable oem-unlock on the data. Which means, yes I cannot unlock the bootloader as long as oneplus 6t doesn't have a loophole like oneplus 3T. I am pretty sure that was fixed though.
Well, I don't know if it's msm tool really. If I just started with that I would have been fine (at least I believe so). Yes I didn't wanted to lock the boot loader, which is why I used fastboot flash tool. But then, that's why I ended up here. So, if you end up in a situation where you might, might need msm tool or flash tool, always go with the msm tool !
For msm, I am quite certain it doesn't flash all partitions. I think there is some partition checkup somewhere. Here is why I think so
1) Completely formatted OS cannot be on a boot loop unless it's caused by hardware issue.
2) All partitions except vendor, system goes way too fast. It ends within 200 seconds for me. I would assume that kinda makes sense as it really is the problem of usb-pc hardware power but installing the image should take longer I think (but then I truly have no idea)
My conclusion is that the tool checks partition size before flashing, and does not touch / replace every file. I am probably wrong since it is
EDI tool after all, but I simply cannot believe msm tool cannot fix something that has nothing to do with the hardware.
I mean, imagine we can brake our newly formatted PC OS without any single components corrupted! (Is it even possible?)

I don't know man....with the bootloader locked you're not able to fastboot flash ANYTHING?

Somehowko said:
For msm, I am quite certain it doesn't flash all partitions.
Click to expand...
Click to collapse
Im sure this is correct. This is about the 3rd or so thread that I have read whereas the MSM tool could not completely recover the phone.
So far no one has found a solution. One person ended up sending theres back to OnePlus so we are waiting to find out how it turned out. Here is the thread I am referencing: https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145

Scott said:
Im sure this is correct. This is about the 3rd or so thread that I have read whereas the MSM tool could not completely recover the phone.
So far no one has found a solution. One person ended up sending theres back to OnePlus so we are waiting to find out how it turned out. Here is the thread I am referencing: https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145
Click to expand...
Click to collapse
Well, tbh, we know as a matter of fact it is not a complete flashing. I mean it clearly says flashing to partition _a only unlike previous versions of msm tools (ah, good days.) What I am curious of is if there is anything we can do about skipping partitions. I am suspecting using qfil would, through unpacking ops files. Although it seems like a long shot.
Btw, thank you for your interest!

Scott said:
Im sure this is correct. This is about the 3rd or so thread that I have read whereas the MSM tool could not completely recover the phone.
So far no one has found a solution. One person ended up sending theres back to OnePlus so we are waiting to find out how it turned out. Here is the thread I am referencing: https://forum.xda-developers.com/oneplus-6t/help/bricked-oneplus-6t-msmdownloadtool-t3900145
Click to expand...
Click to collapse
Msm tool has hidden functions, it's a pain but not impossible.
Search Google and gsm forums for readback mode, smt wipe, and imei/esn restore...
Siren siren... Watch out the xda police gunna blow down and remove my comment.. oh nooooo aghastt....
Btw u cannot use berklers script without an AES recovery key. There aren't any around as far as I know for fajita.
Easiest thing is if OnePlus bought device, get an exchange.. play dumb.. oops I dunno, your Android Q crap broke it..
Or if tmo bought, add insurance if u don't have it, play dumb. Get a new one. I did for a scratched screen..but made it about the modem not working, bc I erased it...
These corporations owe us nothing.
Get a new phone man

fullofhell said:
Msm tool has hidden functions, it's a pain but not impossible.
Search Google and gsm forums for readback mode, smt wipe, and imei/esn restore...
Get a new phone man
Click to expand...
Click to collapse
Thank you so much! I don't have to hassle with python anymore!!! That thing was making my brain fart!
Sadly, That's the only option that I got. As I am living in Korea and I cannot send a phone outside of a country (funny isn't it? they say battery hazard, I say licking Samsung's ass) I can't even get it fixed.
Frankly, I love my phone and I would go an extra mile even for a hint of getting it back to work again.
I will try to look for back up and smt wipe. Hopefully, I wouldn't totally destroy my phone. (again, hopefully.)
If you have any other information, please share with me!

Somehowko said:
Thank you so much! I don't have to hassle with python anymore!!! That thing was making my brain fart!
Sadly, That's the only option that I got. As I am living in Korea and I cannot send a phone outside of a country (funny isn't it? they say battery hazard, I say licking Samsung's ass) I can't even get it fixed.
Frankly, I love my phone and I would go an extra mile even for a hint of getting it back to work again.
I will try to look for back up and smt wipe. Hopefully, I wouldn't totally destroy my phone. (again, hopefully.)
If you have any other information, please share with me!
Click to expand...
Click to collapse
You're saying an msm reload didn't fix the device? Btw you can use the unlocked device msm tool as well as of version 9.0.11 I believe, just look for the modded tool that skips the model check, did you do a full system backup before tinkering? If so you can dd files back into place if msm doesn't overwrite them the way its supposed to, I've done some crazy things to the 6t, a bit surprised recovery didn't fix it for you...
And yeah FoH already pointed out that decrypt tool is useless to us.

Dark Nightmare said:
You're saying an msm reload didn't fix the device? Btw you can use the unlocked device msm tool as well as of version 9.0.11 I .
Click to expand...
Click to collapse
Are you talking about what
PHP:
Eliminater74
shared with us? if so, I tried to use back up before smt download but it fails. firehorse read data error 995.
And I didn't do the back up; I only flashed every partition with the fastboot-flash tool. I am quite surprised to see msm letting me down as well );
Can you share more if you know more?

Somehowko said:
Are you talking about what
PHP:
Eliminater74
shared with us? if so, I tried to use back up before smt download but it fails. firehorse read data error 995.
And I didn't do the back up; I only flashed every partition with the fastboot-flash tool. I am quite surprised to see msm letting me down as well );
Can you share more if you know more?
Click to expand...
Click to collapse
Na, there was another someone else had modded, it should be in the general forum, I believe it was linked in the new international conversion method, the one after my thread. If you simply flashed using the fastboot-flash-tool, then you should definitely be recoverable, attempt a msm reload, I believe you may have a usb port issue if you're having firehose failures, try using an onboard port and not the front ports.

Dark Nightmare said:
Na, there was another someone else had modded, it should be in the general forum, I believe it was linked in the new international conversion method, the one after my thread. If you simply flashed using the fastboot-flash-tool, then you should definitely be recoverable, attempt a msm reload, I believe you may have a usb port issue if you're having firehose failures, try using an onboard port and not the front ports.
Click to expand...
Click to collapse
That's weird. If I had a usb port issue it would say it during the msmdownloading wouldn't it? Msmdownload goes fine but I just can't use the readback function.
And thank you I will go and look for it!

Somehowko said:
That's weird. If I had a usb port issue it would say it during the msmdownloading wouldn't it? Msmdownload goes fine but I just can't use the readback function.
And thank you I will go and look for it!
Click to expand...
Click to collapse
qusb is weird, it would let me backup but not flash once, tried a different port and it worked fine for both, so I figured I'd suggest such, doesn't hurt to try after all?

Dark Nightmare said:
qusb is weird, it would let me backup but not flash once, tried a different port and it worked fine for both, so I figured I'd suggest such, doesn't hurt to try after all?
Click to expand...
Click to collapse
Weird, different port different errors. Error code changed. I will try with other desktops this afternoon.
For another msmdownload tool, are you referring to the thread "T-Mobile 6T to International Conversion (WITHOUT unlocked bootloader/SIM unlock!)"?
Thank you so much for your help!

Somehowko said:
Weird, different port different errors. Error code changed. I will try with other desktops this afternoon.
For another msmdownload tool, are you referring to the thread "T-Mobile 6T to International Conversion (WITHOUT unlocked bootloader/SIM unlock!)"?
Thank you so much for your help!
Click to expand...
Click to collapse
That's correct and if you're on windows 10 it may be a system update messing with the drivers, its dumb, but it actually affects the simplest of things.

Somehowko said:
Weird, different port different errors. Error code changed. I will try with other desktops this afternoon.
For another msmdownload tool, are you referring to the thread "T-Mobile 6T to International Conversion (WITHOUT unlocked bootloader/SIM unlock!)"?
Thank you so much for your help!
Click to expand...
Click to collapse
As crazy as it sounds three reboots and four different ports did the trcik!
And sincerely thank you! Although I couldn't find the modded msmtool you told me I was able to boot into the os finally.

Wifi/bluetooth keep trying to turn on but fail everytime.

When I try to enable wifi (or bluetooth), it says 'Turning on...' underneath the icon but the process never succeeds.
Note:
-Under About > Status I see no MAC address for Wifi or Bluetooth.
-Phone is not rooted.
-Bootloader is unlocked.
-No custom recovery.
-Airplane mode is off.
-I am able to access the internet when I put in my SIM card and use my cellular data.
-EDIT: Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
-EDIT: I keep my SIM out of this phone (it's in my fully working phone). Can insert if need be.
My attempts to solve this issue (none have worked):
-I updated to OxygenOS 11.
-I booted into recovery and wiped everything, including cache. I also did a System Reset.
-I went to Settings > System > Reset Wifi, mobile and Bluetooth. I also did Erase all data (factory reset) in the same place.
Is there anything else left to try? Is there a way to flash the modem image maybe, I remember having to do that with my Nexus 4 many years ago.
Thanks!

A factory reset never finds the root cause. A virus or an old load are the only reasons to use it otherwise find the root cause. Usually a bad setting. If it's software caused the solution is right in front of you.
Network reset, worth a shot.
Clear system cache, can't hurt.
Clear data in sim card tool kit apk.
Both are probably redundant since you already did a hard reset, but try anyway.
Otherwise...
Bad sim card (try reseating it or replace otherwise) , corrupted firmware, or defective hardware.

Which phone do you have? I've seen this when a user has had a Chinese version and converted to global then when they updated to 11 it all went wrong.
If you're not using a converted Chinese phone then it could very well be your boot image. Extract it using payload then flash it.
If not that then MSM restore your current firmware.

dladz said:
Which phone do you have? I've seen this when a user has had a Chinese version and converted to global then when they updated to 11 it all went wrong.
If you're not using a converted Chinese phone then it could very well be your boot image. Extract it using payload then flash it.
If not that then MSM restore your current firmware.
Click to expand...
Click to collapse
Sorry, what is **MSM** restore?
Under About phone the Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
So I extracted all the images(?) using payload and very foolishly decided to
Code:
fastboot flash modem modem.img
The phone doesn't boot up anymore/remains stuck in loading phase (spinner...). I did a
Code:
fastboot flash boot boot.img
+ wipe + factory reset but still stuck in loading phase.
Any ideas as to how I can fix my mistake?
I appreciate all your help guys.

bassamanator said:
Sorry, what is **MSM** restore?
Under About phone the Model is listed as IN2025. The Build number is Oxygen OS 11.0.2.2.IN11AA.
So I extracted all the images(?) using payload and very foolishly decided to
Code:
fastboot flash modem modem.img
The phone doesn't boot up anymore/remains stuck in loading phase (spinner...). I did a
Code:
fastboot flash boot boot.img
+ wipe + factory reset but still stuck in loading phase.
Any ideas as to how I can fix my mistake?
I appreciate all your help guys.
Click to expand...
Click to collapse
Ah yea that's not good. 2025 AFAIK is global mainly sold in the US.
The MSM tool is in discussion I believe and it's a tool you use to restore your phone using EDL mode, to get to EDL.
Power off your phone.
Connect it to your computer (if it turns on again turn it back off)
Then open up the MSM tool and press and hold volume up and down
Your computer will recognise the the device and at this point you should start the process as it will try again to reboot shortly after without any input from you.
This is the thread you need.
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Bare in mind this will relock your bootloader but it's easy to get that back unlocked.
Any questions regarding the tool just ask in the thread.
(you shouldn't need to providing you download the right one)
Download the latest firmware within the tool. If you get stuck don't just guess, ask someone.

@dladz
So I've managed to unbrick the phone using that tool. Thanks.
I'm going to install the latest oxygenos again, extract the boot.img from that zip, and flash it again as per your recommendation.

So I flashed OnePlus8ProOxygen_15.O.32_OTA_0320. No wifi. I extracted the boot.img and then flashed it via fastboot. Still no wifi.
Anything else that I can try?
I guess this is a hardware problem?

bassamanator said:
So I flashed OnePlus8ProOxygen_15.O.32_OTA_0320. No wifi. I extracted the boot.img and then flashed it via fastboot. Still no wifi.
Anything else that I can try?
I guess this is a hardware problem?
Click to expand...
Click to collapse
But now you have bt?

blackhawk said:
But now you have bt?
Click to expand...
Click to collapse
No bluetooth either. Same exact issue as with the Wifi, it says Turning on... then it doesn't.

bassamanator said:
No bluetooth either. Same exact issue as with the Wifi, it says Turning on... then it doesn't.
Click to expand...
Click to collapse
How/when did it start? Anything happen to the phone?

bassamanator said:
@dladz
So I've managed to unbrick the phone using that tool. Thanks.
I'm going to install the latest oxygenos again, extract the boot.img from that zip, and flash it again as per your recommendation.
Click to expand...
Click to collapse
So if you've used that tool then it'll have relocked your bootloader.
Did you unlock it again? AFAIK you can't flash another boot image unless you unlock it again.
The only other thing i can recommend (if you really don't want to RMA)
Would be to downgrade to 10 but in all fairness that really shouldn't even be an option at this point, you've flashed a clean OS back as oxygen would have, you've updated via the official OTA route.
No I think it's time to contact OnePlus for an RMA.
Unless someone else had seen this issue personally I haven't.
Had you rooted in the past btw? Flashed many magisk modules??
I find it highly unlikely that they could survive this but you could potentially try the magisk removal command, can never remember it it's in my payload dumper guide.
If no one else chimes in I'd say it's an RMA, I've not seen it before, it's strange.
Also (and please don't put it on here) but is your IMEI missing too?
This could be your EFS partition if so.
Edit: found this super old thread for the OnePlus one, same issue.
I think this is fixable, potentially remotely from OnePlus and or anyone else who has access to the updated tool, might be worth mentioning in the MSM thread if you haven't already.
PS: don't follow the guide in the link btw it's for the 1+1 lol, in just putting it here as a reference
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com

blackhawk said:
How/when did it start? Anything happen to the phone?
Click to expand...
Click to collapse
I got the phone used right before Christmas. It still had the protective plastic on it until I removed it today. It really is in mint condition (or looks to be). I've been away and finally got around to moving things over from my old oneplus 3T.
It's certainly possible that I bought a lemon but at this point I'd like to just fix it if I can.

bassamanator said:
I got the phone used right before Christmas. It still had the protective plastic on it until I removed it today. It really is in mint condition (or looks to be). I've been away and finally got around to moving things over from my old oneplus 3T.
It's certainly possible that I bought a lemon but at this point I'd like to just fix it if I can.
Click to expand...
Click to collapse
I think it's fixable now I really do
From what I've been reading I think it's a mixture of partitions that have been borked z namely the EFS and potentially the persist.img partition if the same position structure exists that did back in the day.
With that in mind are you able to use your fingerprint? I only ask as persist is linked to it so if that's not working then we may have a correlation between problems.
If it is then it's a ? Over the theory.
I'll keep reading but from what I can gather it seems that EFS and persist at least were linked, can't be sure if they are this point.
Have a look at that link I sent see if anything raises a flag for you, bare in mind it's for an older device

dladz said:
So if you've used that tool then it'll have relocked your bootloader.
Did you unlock it again? AFAIK you can't flash another boot image unless you unlock it again.
The only other thing i can recommend (if you really don't want to RMA)
Would be to downgrade to 10 but in all fairness that really shouldn't even be an option at this point, you've flashed a clean OS back as oxygen would have, you've updated via the official OTA route.
No I think it's time to contact OnePlus for an RMA.
Unless someone else had seen this issue personally I haven't.
Had you rooted in the past btw? Flashed many magisk modules??
I find it highly unlikely that they could survive this but you could potentially try the magisk removal command, can never remember it it's in my payload dumper guide.
If no one else chimes in I'd say it's an RMA, I've not seen it before, it's strange.
Also (and please don't put it on here) but is your IMEI missing too?
This could be your EFS partition if so.
Edit: found this super old thread for the OnePlus one, same issue.
I think this is fixable, potentially remotely from OnePlus and or anyone else who has access to the updated tool, might be worth mentioning in the MSM thread if you haven't already.
PS: don't follow the guide in the link btw it's for the 1+1 lol, in just putting it here as a reference
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
Click to expand...
Click to collapse
Yes I had to oem unlock again.
As far as I know the phone was not rooted but it's a used phone. Superficially it's in mint condition, I just removed the plastic film just earlier. I'll post in the MSM thread and checkout the new one you posted.
EDIT: the phone has 2 IMEI numbers.

bassamanator said:
Yes I had to oem unlock again.
As far as I know the phone was not rooted but it's a used phone. Superficially it's in mint condition, I just removed the plastic film just earlier. I'll post in the MSM thread and checkout the new one you posted.
Click to expand...
Click to collapse
I've already posted in the MSM thread for you.
What about your fingerprint? Is that still working?

dladz said:
I think it's fixable now I really do
From what I've been reading I think it's a mixture of partitions that have been borked z namely the EFS and potentially the persist.img partition if the same position structure exists that did back in the day.
With that in mind are you able to use your fingerprint? I only ask as persist is linked to it so if that's not working then we may have a correlation between problems.
If it is then it's a ? Over the theory.
I'll keep reading but from what I can gather it seems that EFS and persist at least were linked, can't be sure if they are this point.
Have a look at that link I sent see if anything raises a flag for you, bare in mind it's for an older device
Click to expand...
Click to collapse
So I've never registered my fingerprint on a smartphone, ever, but I thought I would register one of my toes just to figure this thing out. When I get to the Fingerprint Setup screen I get the following error: Enrollment was not completed. Fingerprint registration error, please try again.
Does this help narrow down the issue?

bassamanator said:
So I've never registered my fingerprint on a smartphone, ever, but I thought I would register one of my toes just to figure this thing out. When I get to the Fingerprint Setup screen I get the following error: Enrollment was not completed. Fingerprint registration error, please try again.
Does this help narrow down the issue?
Click to expand...
Click to collapse
Yea for me it does, it shows there's a correlation between the persist problem and the EFS problem and a direct connection to your IMEI or Mac address issue.
With this in mind I would recommend the persist.img fix thread..
Getting that working may be key to solving the Mac / IMEI problem.
At this point nothing is going to hurt.

Here is the thread you'll need.
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com
Now I have not been through this but again it can't hurt at this point.

dladz said:
Here is the thread you'll need.
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com
Now I have not been through this but again it can't hurt at this point.
Click to expand...
Click to collapse
I was about to say, I want to try something along the lines of
fastboot erase modemst1
fastboot erase modemst2
fastboot erase persist
Click to expand...
Click to collapse
or something along those lines from this post https://forums.oneplus.com/threads/no-imei-and-no-efs-backup.322534/page-4#post-14545355 on that old oneplus forum thread you posted.
I'll try the new link you posted instead though.
IMEI is fine btw, the phone dials and connects just fine to cellular.

bassamanator said:
I was about to say, I want to try something along the lines of or something along those lines from this post https://forums.oneplus.com/threads/no-imei-and-no-efs-backup.322534/page-4#post-14545355 on that old oneplus forum thread you posted.
I'll try the new link you posted instead though.
IMEI is fine btw, the phone dials and connects just fine to cellular.
Click to expand...
Click to collapse
Ok don't do the EFS fix you do not have an EFS back up.
Give this a shot
go to data/misc/wifi (required root)
-backup file wpa_supplicant.conf in this folder which contains usename and password wifi
- delete all file in this folder
- turn on wifi ( if you careful, you can reboot )
- now you can connect to wifi
- recovery file wpa_supplicant.conf
This isn't my writing. The English is a little broken but you get the point

Fingerprint reader not working anymore

So a while back I decided to actually try to use the phone completely stock, I reflashed with MSM and it even relocked my phone.... Problem is that when I go back to stock my fingerprint reader stops working, if I unlock the bootloader and root the device it starts working again... What could be the problem?

kieeps said:
So a while back I decided to actually try to use the phone completely stock, I reflashed with MSM and it even relocked my phone.... Problem is that when I go back to stock my fingerprint reader stops working, if I unlock the bootloader and root the device it starts working again... What could be the problem?
Click to expand...
Click to collapse
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com

MariusKv said:
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com
Click to expand...
Click to collapse
I can try, but I'll need to unlock and root again, and that also solves the problem

persist critical partition

I have a oneplus 8 pro, and experimenting with it I messed up the fingerprint, I had already made the copy of persist and then now trying other solutions the camera also stopped working and I can't flash my persist.img to see if it's solved, I get it the error message remote critical partition, I already tried to do the fastboot flashing unlock_critical but it keeps giving me the same error, if I try unlock_critical again I get the message device already unlocked, sorry for my bad English

idk if there are better ways but i would use msm tool and start over

xtcislove said:
idk if there are better ways but i would use msm tool and start over
Click to expand...
Click to collapse
I already did it many times but that doesn't affect persist that's why I need to flash...

ddav_23 said:
I already did it many times but that doesn't affect persist that's why I need to flash...
Click to expand...
Click to collapse
I would use MSM tool, unlock bootloader and then follow this thread for example.
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com

xtcislove said:
I would use MSM tool, unlock bootloader and then follow this thread for example.
[GUIDE] Fix PERSIST.IMG Loss Of Finger Print Sensor
New video guide below VIDEO GUIDE 1. *VERY IMPORTANT* We need to back up your broken persist.img and store it in a safe place. PC preferred. We will need this later. Do not leave the backup on the device as the next step will wipe the device...
forum.xda-developers.com
Click to expand...
Click to collapse
I just had that problem after trying that guide... what happens is that people lost the fingerprint because yes, I instead decalibrated it by manipulating the engineer mode... And I didn't save a copy of my persist before... So I can't follow the tutorial anymore to fix my reader... I seem to be misunderstanding... I just need someone to help me To be able to flash my persist, I need to be able to do "unlock_critical" and not tell me giving an error in fastboot when trying...I don't need any msm or anything like that... Thanks my friends

Or in the same way to be able to fix the camera error that does not open and remains on a black screen... The flashlight gives the camera in use error and cannot be used either..

As far as i know some people got it fixed with relocking the bootloader and starting over.
fastboot flashing unlock_critical should work and what i found if it not works people used MSM tool to start over.
Thats why i suggested this.
I suggest you already tried to use MSM tool?
What are the steps you already tried so far if not?
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com

xtcislove said:
As far as i know some people got it fixed with relocking the bootloader and starting over.
fastboot flashing unlock_critical should work and what i found if it not works people used MSM tool to start over.
Thats why i suggested this.
I suggest you already tried to use MSM tool?
What are the steps you already tried so far if not?
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
As I already mentioned, sorry if my English is not well understood... I have already opened and closed the bootloader about 10 times... I have also used MSM several times... the version with Android 10 I don't remember the exact number But it's the same as mentioned in the thread to recover the fingerprint... My only hope is to be able to achieve "fasboot flash persist..."

I already saw that I must do "fastboot flashing unlock_critical" but even after it continues to appear that critical partitions cannot be flashed

Question Fingerprint Sensor Not Working after unbricking phone

Long story short, I bricked my device very hard, very many times while trying out different ROMS and getting accustomed to handling fastboot and adb. At some point along the journey I must've broken something to do with the fingerprint sensor (or the security authentication method)? The sensor doesn't pick up anything when I have my finger on it, as if I had replaced the screen or something. This happens with all ROMS, including after doing a full reset to factory images and running Nothing OS. Maybe a driver or something?
I was using NOS 1.1.6 and and reset to the image that I found on https://reindex-ot.github.io/
There is now also a 1.1.7 ROM but I haven't tried updating to it yet, though I will at some point.
I have no idea how this actually works so any help would be appreciated. If there is a fingerprint calibration method, a piece of software to help or a certain stock img file that is needed then please leave a reply!
For now I have been using Face Unlock as a drop in replacement, although the algorithm and sensors don't provide for as quick and reliable authentication as the fingerprint sensor, so I would really like to get this fixed.
It also kinda forces me into using Paranoid Android right now as it has best Face Unlock that I've come across so far, and being able to authenticate quickly is worth most of the downsides that come with using it at this stage of development.

Calibrating the fingerprint sensor may improve the situation. The site introduced here is in Japanese.
Relife RL-071Bで光学式画面内指紋認証センサーの動作を修正する方法 - AndroPlus
画面内指紋認証センサーを搭載したAndroidスマホで指紋を登録できなくなったときの対処法を紹介します。 キャリブレーションし直しで解決できる場合あり 画面内指紋認証センサーを搭載したAndroidスマートフォンでは、特にBootloader
androplus.org

ot_inc said:
Calibrating the fingerprint sensor may improve the situation. The site introduced here is in Japanese.
Relife RL-071Bで光学式画面内指紋認証センサーの動作を修正する方法 - AndroPlus
画面内指紋認証センサーを搭載したAndroidスマホで指紋を登録できなくなったときの対処法を紹介します。 キャリブレーションし直しで解決できる場合あり 画面内指紋認証センサーを搭載したAndroidスマートフォンでは、特にBootloader
androplus.org
Click to expand...
Click to collapse
I read through the article and tried all the methods but I couldn't get anything to happen when I dialled. Thanks so much for the help though!
I think the reason my sensor is not working is because I flashed a persist partition when I was unbricking my phone, maybe if i flash a recent persist partition it will fix the fingerprint issue? Maybe it wont, not sure if something like that needs to be calibrated at the factory?
Either way, I am willing to try...
If anyone has a factory persist.img for Phone 1 that might help?
Ideally Nothing OS 1.1.6 full factory setup, but 1.1.7 will also help a lot as I can update.
Any post is appreciated!

I will put out a persist.img. I hope this fixes it.
NothingPhone(1)_Persist.zip
Nothing Phone(1) persist
drive.google.com

ot_inc said:
I will put out a persist.img. I hope this fixes it.
NothingPhone(1)_Persist.zip
Nothing Phone(1) persist
drive.google.com
Click to expand...
Click to collapse
Can I ask what version this is from?

jhonnytable said:
Can I ask what version this is from?
Click to expand...
Click to collapse
v1.1.7