I recently purchased a Tablet A7 model number SM-T500NZAAXAR. I am understanding that this is a US model, but the firmware is what is confusing me. The firmware is T500XXU3BUJ1 which shows up in several different country models. It is running Android 11 and is the 64gb model.
What do I have? LOL... it is rather confusing. And... if this is not a US Firmware model, can I load US Firmware without issues? This is a Wifi model so I am not worried about LTE or anything else like that.
Any info would be greatly appreciated. And, thanks in advance.
Brian D said:
I recently purchased a Tablet A7 model number SM-T500NZAAXAR. I am understanding that this is a US model, but the firmware is what is confusing me. The firmware is T500XXU3BUJ1 which shows up in several different country models. It is running Android 11 and is the 64gb model.
What do I have? LOL... it is rather confusing. And... if this is not a US Firmware model, can I load US Firmware without issues? This is a Wifi model so I am not worried about LTE or anything else like that.
Any info would be greatly appreciated. And, thanks in advance.
Click to expand...
Click to collapse
XAR is the "country code" for Cellular South, which includes the U.S. and Canada.
Thanks. I was aware that the device is a US model, but it was the firmware that was confusing me. Whenever I looked for the firmware, it would show as India or someplace else. Now, after more research, I see that firmware is associated with multiple countries. I finally found the XAR associated version and downloaded that file. Thanks again.
Related
Hello, I would like to know if I can flash my verizon galaxy s8 with tmobile software, or any other model, since I can see that this year all the carriers are using the same model G950U. That is, a single model with different carriers, very similar to how the international version G950F works which is the same model for all carriers in Europe and allows you to change the software through ODIN. I hope someone can help me. Thank you very much.
lmario1985 said:
Hello, I would like to know if I can flash my verizon galaxy s8 with tmobile software, or any other model, since I can see that this year all the carriers are using the same model G950U. That is, a single model with different carriers, very similar to how the international version G950F works which is the same model for all carriers in Europe and allows you to change the software through ODIN. I hope someone can help me. Thank you very much.
Click to expand...
Click to collapse
From what I've gathered is that there's a user data partition that dictates the carrier and Odin currently doesn't allow flashing of this.
Saw this as a comment somewhere here and best I've seen so far.
Personally I think it is just a matter of time before we figure this phone out and will be able to do whatever we want. They already have root for Exynos model and I think now the search is on for modified Odin, as Tehpirate said. I believe they had modified Odin for S7, to do similar stuff, so it's not like starting from scratch.
I hope is the same like the s7 U firmware... That's nice cause I can flash U firmware and get rid of the carrier bloatware.
Before I start, this is the first android phone I've ever owned so the question may or may not be stupid.
So I live in India and I saw the trade-in deal for the S8. I was in need of an upgrade (iPhone 6) so I went for it as I was heading to the U.S soon. I heard that the international version gets updates sooner than the unlocked U.S version. Can I just change my firmware to international, get earlier updates with no drawback? If yes then why have I not seen a lot on this?
Pretty sure the firmware is locked to the device unless you root. I had an unlocked international S6(920?F) . It updated a lot earlier than the W released in Canada.
Sent from my SM-T820 using Tapatalk
ExLite23 said:
Before I start, this is the first android phone I've ever owned so the question may or may not be stupid.
So I live in India and I saw the trade-in deal for the S8. I was in need of an upgrade (iPhone 6) so I went for it as I was heading to the U.S soon. I heard that the international version gets updates sooner than the unlocked U.S version. Can I just change my firmware to international, get earlier updates with no drawback? If yes then why have I not seen a lot on this?
Click to expand...
Click to collapse
If the device you get is G950F (international) then updates will come sooner. If you get any other version they are for specific regions, so if you get G950U (US unlocked) you can't flash international firmware to it. Can only flash firmware for the model you get.
callumbr1 said:
If the device you get is G950F (international) then updates will come sooner. If you get any other version they are for specific regions, so if you get G950U (US unlocked) you can't flash international firmware to it. Can only flash firmware for the model you get.
Click to expand...
Click to collapse
Then what are the benefits of people switching carriers for example? There seem to be a bunch of threads giving a tutorial on how to change firmware to different carries e.g. From a T Mobile to Unlocked.
ExLite23 said:
Then what are the benefits of people switching carriers for example? There seem to be a bunch of threads giving a tutorial on how to change firmware to different carries e.g. From a T Mobile to Unlocked.
Click to expand...
Click to collapse
For stuff like WiFi calling, voLTE, removal of bloat some csc tweaks
Guess that's unfortunate.
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.
Hi guys, need some advice on S10+.
I'm from an Asia country and last year I bought a new S10+ from a online seller which does grey imports for mobile phones, because I want a Snapdragon version over the Exynos, which is what most Asia countries get.
The Model number (SM-975U) and Baseband version (G975USQS3CTB6) are indicating this is a US variant but I can't tell which carrier it is because there is no carrier logo on the phone or when I turn on the phone, no bloatwares as well.
The only down side is this Baseband/carrier does not have updates since March 2020. I tried checking for updates but got nothing.
What I try to get:
1. Latest original firmware which will continue to update itself (hopefully)
2. No carrier bloatware
3. No need root or custom roms (Doesnt go well with banking apps)
I have experience rooting and flashing custom firmware on my previous Samsung Galaxy S7 Edge, but I can't remember if I have done unlocking bootloader before, lol.
Need advice on:
1. Which firmware should I choose?
2. I remember XDA forums used to have useful Guide under Sticky Threads but now I don't see it. I hope this guide will be able to help me with what I am trying to do.
3. I probably sound stupid here, is there any flashable settings file that is friendly to Asian region/telco? I am noticing a bit of network weakness on my phone, I hope its just me.
Thanks to anyone who reads this.
You've aquired the US Unlocked Snapdragon variant, it's not associated with any US carrier and it's not bootloader unlocked. Flashing updated FW is likely your best bet, it's available here.
Download Samsung Galaxy S10+ SM-G975U TMK USA (MetroPCS) G975USQS4FUA1 firmware
Fast download latest Samsung Galaxy S10+ firmware SM-G975U from USA (MetroPCS) with G975USQS4FUA1 and Android version 11
www.sammobile.com
The only other option for an update is Samsung's SmartSwitch. Whether or not it's compatible depends on your local service provider.
I picked up a Tab A 8.0 (SM-T290) from Amazon a while ago for my wife to use. Because I'm an idiot, I didn't pay attention to what region code it was before I updated it. Does anyone else in the United States have an (as yet) unmodified T290 and can tell me the CSC?
Settings > About > Software Info > Service provider information
Was it unlocked or carrier locked?
Kenora_I said:
Was it unlocked or carrier locked?
Click to expand...
Click to collapse
No carrier, WiFi only model from Amazon.
V0latyle said:
No carrier, WiFi only model from Amazon.
Click to expand...
Click to collapse
T290XAR3BTL3
For US at least
XAR - US
UYO - US
Thanks folks. Looks like T290XXU3CUF8 is the latest version, at least via Frija. There's a few different versions out there - OXM, OLM are XAR, OWO is UYO.