should i have radio img and bootloader img of nexus4's kitkat??
i have flashable zip,but i don't want to install there by recovery...i would like to flash them via fastboot on ubuntu terminal.
thanks to all
download the factory image from google. Then you can extract all of the xxxx.img and flash those via fastboot.
I attempted flashing a ZVA zip earlier that uses `qcom.install_radio`. Unfortunately, this somehow causes my LS980 to loop in fastboot mode. I've seen a few other people talking about this happening to them as well, so decided I would share this.
Thanks to http://direct.xda-developers.com/showthread.php?t=2451426, I was able to get the original *.img files and drop them in with fastboot.
You'll need to go to http://downloads.codefi.re/autoprime/LG/LG_G2 and download the partitions that you need. After that is done, run the following (replacing with your file names along the way):
Code:
fastboot flash aboot aboot.img
fastboot flash boot boot.img
fastboot flash tz tz.img
fastboot flash rpm rpm.img
fastboot flash modem modem.img
fastboot flash laf laf.img
fastboot flash sbl1 sbl1.img
You can continue flashing the rest of the files, but these were the files that were effected by the zip I used and sufficed for getting it back online.
After that's done, you need to flash the *.img file for the recovery that you want. For instance, mine would be:
Code:
fastboot flash recovery twrp.img
You'll need to turn the phone completely off, then reboot it while holding power and volume down. This will get you into your recovery and allow you to recover from a backup, or whatever you'd like to do at that point.
Hi everyone,may some of you need to back to stock Emui here some simple method which working fine, and i've try myself.
Things needed:
-Download these 4 images files, you can get it here
https://mega.nz/#!0s9y0QJA!dqtNYSObqGXZvx-z4z6c4W6Az4_kRS7rnvzKzkgQpms
-Make sure you have adb&fastboot working, you guys really know what's this really well.
-Download and extract the files, make it easier folder/dir.
-Flash each files as its named
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash ramdisk ramdisk.img
Fastboot flash cust cust.img
Fastboot erase system
Lets wait till process done
Fastboot Flash system system.img
When you need to re-lock bootloader use Huawei Multi-Tool
And all those files extracted using Huawei MT, based on latest Oreo HW_eu.
Don't try to use the files on other model, when you do..do it with your own risk.
I decided to type and flash it manualy after faced some error on system partition using Huawei MT.
I just want to know can I extract the files from fastboot firmware and make a twrp flash able zip ROM for my mi A1 and I have a little confusion there is a system_other.img file in fastboot ROM what is it for and second there is no shoot.img file in fastboot ROM there is emmc_appsboot.mbn file what I can do with these two files please reply I'm really confused.
I've MSM'ed about 8 times today. Every single time I attempt to flash recovery, no matter which recovery, it overwrites the system and upon rebooting to recovery through fastboot, it permanently stays in fastboot. I can MSM out of it. I've tried conversion MSM, temporarily booting recovery, flashing firmwares, resetting, wiping. I cannot fix this. I have spent over 11 hours trying to troubleshoot this. Google comes up with useless results. This is the first time I've not been able to recover from a situation with this phone. Please, if you have any ideas, shoot. The model is kb2007.
Reserved.
try a fastboot boot twrp ( https://github.com/ApexLegend007/twrp_device_oneplus_lemonades/releases ) and try factory resetting it then see if you can switch your partition from a to be or b to a then try msm flashing ( https://androidfilehost.com/?fid=17248734326145733797 )
Nimiskiv said:
try a fastboot boot twrp ( https://github.com/ApexLegend007/twrp_device_oneplus_lemonades/releases ) and try factory resetting it then see if you can switch your partition from a to be or b to a then try msm flashing ( https://androidfilehost.com/?fid=17248734326145733797 )
Click to expand...
Click to collapse
I can't even boot TWRP, it just shows the Oneplus logo and the"fastboot mode" thing forever. It's been 10 minutes now.
If you've used MSM then you're on OOS 11.
I assume the phone boots properly after MSM.
On OOS 11 you can only use TWRP 11 from https://dl.twrp.me/kebab/
And you can only use TWRP 12 on OOS 12 from https://forum.xda-developers.com/t/...in-recovery-project-8t-9r-2022-07-27.4473983/
PS: and you should have posted this in the 8T Q&A forum.
BillGoss said:
If you've used MSM then you're on OOS 11.
I assume the phone boots properly after MSM.
On OOS 11 you can only use TWRP 11 from https://dl.twrp.me/kebab/
And you can only use TWRP 12 on OOS 12 from https://forum.xda-developers.com/t/...in-recovery-project-8t-9r-2022-07-27.4473983/
PS: and you should have posted this in the 8T Q&A forum.
Click to expand...
Click to collapse
nope, still cant boot into twrp
Version of OOS?
Version of TWRP?
Does OOS boot cleanly?
What's your phone?
BillGoss said:
Version of OOS?
Version of TWRP?
Does OOS boot cleanly?
What's your phone?
Click to expand...
Click to collapse
OOS is 11.1.0.2.KB09CB
I've tried TWRP 3.6.1, 3.6.0, and 3.6.2
OOS does boot cleanly.
Phone is KB2007.
The bootloader is unlocked.
I've truly never had this problem before.
You'll probably have to upgrade to the latest version of OOS 11 (or 12) before TWRP will boot.
I have an idea, if you are in fast boot mode then you can flash everything manually. ( https://forum.xda-developers.com/t/oneplus-8t-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4193183/ ) there's only international version (kb2005) it can work with that. Just use payload dumper to extract all the .img by dragging and dropping the payload.bin unto payload dumper after extracting them all into a folder then use the commands to flash them all with adb. Then reboot to recovery, factory reset, and MSM tool back to TMO.
do these commands one by one replacing the .img with the location of the .img. actually, just drag and drop the file after. ( ex: fastboot flash logo C:\Users\???\Desktop\???.img )
Just an extra recommendation to wipe the device
( Fastboot -w )BEFORE THE OTHER COMMANDS but you don't need to if it works without wiping.
fastboot flash logo logo.img
fastboot flash mdm_oem_stanvbk mdm_oem_stanvbk.img
fastboot flash modem modem.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash recovery recovery.img
fastboot flash spunvm spunvm.img
fastboot flash storsec storsec.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash vendor vendor.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
I'm way too inexperienced with this but if anything goes wrong you can MSM tool back to fastboot.
honest recommendation, just use TMO to International MSM tool after. unless you want to keep it TMO (kb2007)
Nimiskiv said:
I have an idea, if you are in fast boot mode then you can flash everything manually. ( https://forum.xda-developers.com/t/oneplus-8t-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4193183/ ) there's only international version so we got to work with that. Just use payload dumper to extract all the .img by dragging and dropping the payload.bin then use the .bat to flash them all onto the phone. Then reboot to recovery, factory reset and MSM tool it back to tmo. do these commands one by one replacing the .img with the location of the .img. actually just drag and drop the file after. ex: fastboot flash app (file)
fastboot flash logo logo.img
fastboot flash mdm_oem_stanvbk mdm_oem_stanvbk.img
fastboot flash modem modem.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash recovery recovery.img
fastboot flash spunvm spunvm.img
fastboot flash storsec storsec.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash vendor vendor.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
Ex: fastboot flash app ( c:/????/desktop/payload_dumper/extracted/app.img ) idk
Just an extra recommended to wipe the device
Fastboot -w but you don't need to if it works without.
I'm way to inexperienced with this but if anything goes wrong you can MSM tool back to fastboot.
Click to expand...
Click to collapse
MirageSteezyBoi said:
I've MSM'ed about 8 times today. Every single time I attempt to flash recovery, no matter which recovery, it overwrites the system and upon rebooting to recovery through fastboot, it permanently stays in fastboot. I can MSM out of it. I've tried conversion MSM, temporarily booting recovery, flashing firmwares, resetting, wiping. I cannot fix this. I have spent over 11 hours trying to troubleshoot this. Google comes up with useless results. This is the first time I've not been able to recover from a situation with this phone. Please, if you have any ideas, shoot. The model is kb2007.
Click to expand...
Click to collapse
Sorry I'm very bad at this. I was thinking you didn't even boot properly.... just update to the latest using oxygen updater or the systems bultin update... Im a moron and ill be leaving that up there.