Been running stock Android 11 for a few months and after charging woke up with this message. Grabbed the matching firmware from SamMobile for my TFN carrier and PDA number. Odin keeps giving errors when I try to reload stock firmware. Can anyone provide suggestions? (See attached image for error) Thanks
Related
Hello all.
Here's a summary of what I did before the imei was null and the baseband was unknown.
I had ressurection remix (android 5) and I tried to flash via CWM another rom (more exactly the albe95 Lollirom 0.99) and it crashed when flashing. It gave me an error and from there or It remained stuck on Galaxy s4 logo.
I did not panicked and I flashed a stock rom via odin. After I finished flashing the phone does not have any signal ,he baseband version sayts "unknown" and the imei is null/null.
I tried to flash a modem via odin but it gave me an error (something like the file "could not be opened (line 2012)" )
I don't know what to do next. Any suggestions?
Edit: I tried to download the S4 fix imei null and flash it via odin but it gives another error "md5 hash value is invalid"
I purchased a Galaxy Edge S7 SM-G935FD Unlocked International Edition (Exynos?) from Amazon US. In an attempt to flash TWRP with Odin, I mistakenly checked re-partition. I thereafter received "an error has occurred while updating the device .... use Emergency Recovery .... in Smart Switch". When I attempt to do so (ie. reinstall stock firmware), I am asked for my Model Number and Serial Number, which I provide. The firmware download appears to complete, but the install does not complete. So here's my questions:
-Givfen my prior repartition, should the Smart Switch Emergency Recovery work, or if not what do I need to do to recover?
-Smart Switch is trying to flash "Initialized Version: : PDAB6 / CSCB4 / PHONEB6 (ACR)". Is that correct for my International Edition?
-I am very confused by the above version code versus the G935FXXU..... firmware codes for rom downloads on websites. What is the correct firmware code for my International Edition?
Thx, Gus
So you need to download the Offical Sammy Firmware for your phone and flash it all via odin
So you can Re-Partition.
Once booted up, repeat your stages avoiding the erros you made the first time./
I rooted my S7 Edge T-Mobile on christmas installed supersu, exposed, etc. then on the 4th none of my apps were opening properly i decided to restart my phone to see if that would fix the problem, nope my phone wont go past the t-mobile logo i have tried flashing stock rom but i am stick in dm verity verification when i got into recovery. Please Help i keep getting a whole bunch of odin errors and am seriously stuck. I dont think i can flash stock anymore i get the dm verity verification which when i looked up people were saying that it wont downgrade.
ODIN errors:
Auth (fail)
NAND write start - this is the most common one
When it fails on odin, this shows up on my phone:
sw rev check fail aboot fused 4 > binary 2 sometimes the numbers change to 3 and 1.
Where did you get your firmware tarballs?
Maybe download firmware again from sammobile.com do an md5sum check.
Have you tried different USB cables through different USB ports in your computer? Are you using factory USB?
Have you tried flashing with Heimdall instead of Odin?
Are you flashing all the proper AP, BL , CP, CSC files?
If you can get into download you should be able to fix this.
I installed TWRP so i could use Magisk and pass safetynet so i could use GooglePay. However during the process i mustve messed up. Currently i can enter TWRP aswell as Download mode however Odin gives the the error "Complete(Write) operation failed." and my phone says "SW REV CHECK FAIL DEVICE 3, BINARY 1"
My device is Galaxy S8 G950F UK H3G, i have checked that i am flashing the right firmware. In addition to this, when i try to boot normally im stuck on the "Samsung Galaxy S8" Boot screen.
Anyhelp would be much appreciated, i just want to get my phone working again.
Any reassurance with drivers and links to specific drivers would be useful, i installed all the ones i could find
Seems like your firmware you are trying to flash is older than the bootloader... try to flash the latest firmware and reply.
shayeque said:
I installed TWRP so i could use Magisk and pass safetynet so i could use GooglePay. However during the process i mustve messed up. Currently i can enter TWRP aswell as Download mode however Odin gives the the error "Complete(Write) operation failed." and my phone says "SW REV CHECK FAIL DEVICE 3, BINARY 1"
My device is Galaxy S8 G950F UK H3G, i have checked that i am flashing the right firmware. In addition to this, when i try to boot normally im stuck on the "Samsung Galaxy S8" Boot screen.
Anyhelp would be much appreciated, i just want to get my phone working again.
Any reassurance with drivers and links to specific drivers would be useful, i installed all the ones i could find
Click to expand...
Click to collapse
Yes thats what this error means your bootloader is updated and you are flashing older firmware than the device currently has by the device 3 I would assume your device is updated to revision 3 of firmware
Hello everyone!
Today i tried to install twrp on my s10+ SM-G765F/DS to install android 12 lineage os.
I placed TWRP at AP and VBmeta at CS.
VBmeta was stuck at the installing phase, for a very long time too.
I decided to quit Odin and unplug the phone.
Error showed up : An error uas occured while updating the device software. Use the emergency revovery function in the Smart Switch PC software.
Using smart switch pc : device dosent show up
FRP Bypass : into download mode, tried flashing original firmware, back to download mode, tried flashing twrp, didn't work, with vbmeta and without.
top left said:
ODIN MODE (AVB FAIL)
recovery: Error validating footer. (0)
recovery: Error verifying vbmeta image : invalid vbmeta footer (6)
CUSTOM RECOVERY
VBMETA G975FXXSBFUE6, 40448985R
Please help me, i dont know what this means and whether my phone can be saved.
I have found a fix.. to everyone who is facing this problem, here is what you need to do.
1.get frija ( you will need visual c++ 2010 and 2008.)
2. obtain your model number and your csc ( found if you search up your carrier in sammobile along with your phones model number product code in my case, i got it under starhub in Singapore therefore, STH)
3. key in the details into frija
4. download the firmware from frija.
5. frija will give you a rar with your firmware, unpack that.
6. match the BL, AP, CS and CSC with the firmware and start.
The process will take a while as its a big file but your phone will be saved!
precautionary measures if you were to attempt again
1. keep the firmware files
2. use a good version of Odin, my error happened because my version of odin didnt work.
3. do a lot of research
For me with my S10+ G975F, this saved me:
An error has occured while updating the device software.
Hello everyone! Today i tried to install twrp on my s10+ SM-G765F/DS to install android 12 lineage os. I placed TWRP at AP and VBmeta at CS. VBmeta was stuck at the installing phase, for a very long time too. I decided to quit Odin and unplug...
forum.xda-developers.com