Hi to all,
Is the HDMI connector also used as a connection for input from a laptop?
Thanks.
Related
Hi, I have an asus TF300TL an I have a hdmi to rca cable to connect to my tv.
At my Tablet don't activate the hdmi out so i need to activate it manually. There are a way to do it on android?
Thx
Hay all,
I got one of these recently to connect to one of my monitors.
My monitor has a display port not HDMI and I have an adaptor for it this one.
It fits well and all, but my device will not power on when plug in via this adapter, I've seen a few issues with this but cant find a answer if there is one.
Has anyone encountered this problem?
Has anyone fixed it or has an idea?
Any help would be appreciated
** solution""
http://h30434.www3.hp.com/t5/Deskto...-on-monitor/m-p/2300015/highlight/true#M27046
Re: HDMI to DisplayPort gives no signal on monitor
Options
01-06-2013 08:44 AM
From displayport.org;
Q: I just purchased a monitor that only has a DisplayPort connection. How can I hook this up to my computer that only has VGA, DVI or HDMI?
A: There is not a cost effective way to do this. The adaptors that are available only work from a DP computer to a VGA, DVI or HDMI monitor and not the other way around. If you have a desktop you can purchase a graphics card with DisplayPort. Our best advice: Before you purchase a DP only monitor make sure you have DP on your computer.
Basically, you can't use the DisplayPort connection on your monitor with ANY device that only has VGA, DVI, or HDMI outputs, without the use of an expensive converter that may not produce acceptable results. Please follow Dave's advice and try to use a HDMI-to-DVI adapter.
Please send KUDOs
Click to expand...
Click to collapse
Solution was used a HDMI to DVI... or anything else really not a display port
Guys, I have a MHL HDMI adapter connected to my AV receiver (Denon AVR 2312) but the screen on the TV just flicks and no phone display appears. If connect the MHL HDMI adapter directly to the TV - it works. Anybody has tried to connect sgs4 to AV receiver via MHL HDMI adapter? I have 9505 with android 4.3 test version
Sent from my GT-I9505 using XDA Premium 4 mobile app
myname70 said:
Guys, I have a MHL HDMI adapter connected to my AV receiver (Denon AVR 2312) but the screen on the TV just flicks and no phone display appears. If connect the MHL HDMI adapter directly to the TV - it works. Anybody has tried to connect sgs4 to AV receiver via MHL HDMI adapter? I have 9505 with android 4.3 test version
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have the same Receiver (AU version with slightly better Audyssey) and can confirm it does work. I Have MHL cable plugged into SAT/CBL input. Have a look through your amps settings, specifically the input it's connected to.
What kind of cable is it- Official Samsung or Ebay Yum Cha?
smoothunit said:
I have the same Receiver (AU version with slightly better Audyssey) and can confirm it does work. I Have MHL cable plugged into SAT/CBL input. Have a look through your amps settings, specifically the input it's connected to.
What kind of cable is it- Official Samsung or Ebay Yum Cha?
Click to expand...
Click to collapse
Thanks. I use theoriginal Samsung MHL-HDMI adapgter... (but not original HDMI cabel). I tried all HDMI inputs, including the front AUX one... the phone shows me - Connect the HDMI directly to TV... very strange. I tried to make the HDMI settings in AVR not to upscale, not to convert etc.. But the same result.. Today I asked Denon support - they simply did not know what is this MHL
I have this same issue. Believe it or not, the input has to be an input specified for MHL/HDMI. Yes, it works if you plug directly into the TV, but if you try to pass it through a receiver input it won't go unless the input says so. Some receivers and some blu ray players have designated HDMI inputs that also handles MHL. If you look at the label of these inputs it won't just say HDMI, it will be labeled as MHL/HDMI.
Hi guys!
I've got a Mate 9 PRO with a powered USB-C hub. Whilst the keyboard, memory stick, mice etc. all work through the hub, I am not getting any HDMI signal from the hubs built in HDMI socket. Is it possible I need to turn something "on" on the phone?
Thanks!
Hi guys!
I want to use wired ethernet on my nintendo switch (installed android) both docked and handheld. I want to buy a TP-link TP-Link UE300 USB3.0 - Gigabit Ethernet adapter and a Gembird A-OTG-CMAF2-01 0.2m USB Type-C USB-A adapter. It is simple plug and play will work, or I must do somthing? Anyone can help me? Sorry for my bad english.