Not booting after changing battery.. need the patched firehose file to be able to flash the stock firmware via EDL.. Anyone have that file?? TIA
Related
Hello i need flash boot loader and pit file via cwm. It is possible ? I dont have computer and i have the error e:cant mount data ... How to flash the stock ROM with bootloader and pit file without computer thanks a lot. I need this because i cant use Odin . i have any solution avaliable ? Sorry bad english
Here is the stock boot image of SM-G955FD Oreo (8.0.0) Indian firmware :
http://www9.zippyshare.com/v/HVR3TIEb/file.html
It's in .tar.md5 format, I extracted it from official Oreo (8.0.0) download from updato.com
Now I need the same boot image file in .img format as .tar.md5 is not supported for patching by MagiskManager.
Please any body provide me this boot image file in .img format or tell me an easy way to do so.
Thanks a lot in anticipation!
i have a MI-9T
stuck on MI logo
I am trying to flash this
i downloaded MI FLASH tool 2018.11.15.0
and i believe the correct flash
davinci_global_images_V10.3.11.0.PFJMIXM_20190802.0000.00_9.0_global_ea6683ef5
i connect the phone in fastboot mode
i unzip the file
and slect the file direct from desktop
says error
can not found the flash file _all bat
i want to ask if this is the correct flash file and flasher
i have been trying for days
i can make it connect but says CAN NOT READ FROM PORT
IT tries to flash but gives a error read packet
any help
Hello. I wanted to flash .elf or otherwise stock firmware over QFIL, but I don't know how to find it on the internet...
Please help, I'm stuck in endless boot loops in every ROM I try to flash for miA1 and I think only a proper install via EDL would work now.
Hello every one. Total noob here. But this is to answer a question I had earlier but found no help with at least upon a basic google search. Earlier I bricked my Tab S6 Lite while trying to install TWRP to replace the current recovery. Hind sight being 20/20 I know now that TWRP is no long active and that is was simply a bad idea. I ended up stuck in odin boot loop with the error message of..
Odin Mode (DT Load Fail)
[DTH] dt table header check Fail: <unknown error>
Load_kernal: Could not do normal boot. (DT LOAD FAILURE)
vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED (3)
CUSTOM VBMETA
VBMETA : No sign info
This put me in a bad spot as ADB, and Fastboot were no longer an option and I could not pull a viable pit from Tab using Heimdall, and Odin will not allow you to flash the recovery that can be found in Lineage downloads page as they are img files.
The solution I found was to use a program to change the recovery.img file found in the Nightly lineage zip folder into to a tar file using the program. And then flash that tar file using odin. This brought me back to standard liniage with no data loss.
Disclaimer: The file attached is not my own, download and use at your own risk.
I do not recommend you mess with software if you're not ready to brick and fix your own device.
Thanks