Database Users

Official Cm13 for HTC One M9[GSM] [himaul]

Good news for HTC One M9 (GSM) user it got first official Cyanogenmod 13 nightly rom based on android marshmallow 6.0 .
Who is ready to test it out. :fingers-crossed:
Source: http://www.gammerson.com/2015/12/download-official-cm13-for-htc-one-m9.html :good:

Super cool!!!!
Sent from my iPhone using Tapatalk

Installed it just now! First issue I've found is that the SD Card is not recognised. Also, remember to flash GApps for marshmallow!

joekiddo said:
Installed it just now! First issue I've found is that the SD Card is not recognised. Also, remember to flash GApps for marshmallow!
Click to expand...
Click to collapse
yea the mounting method is different now ... it tries to recognize it as internal storage i think, but when it's not formatted for internal storage it will be just skipped...same Problem on many MM roms, not only for m9 and m8

Does SuperSU 2.56 work with cm13 on One m9?

vrxj81 said:
Does SuperSU 2.56 work with cm13 on One m9?
Click to expand...
Click to collapse
No need for this. Root is built in. You can enable it through the developer's menu

is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....

dbarrett480 said:
is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....
Click to expand...
Click to collapse
I'm not with AT&T but I can make and receive calls, except that if I don't enter the area code when dialing, the phone app crashes. I can still call even if the app crashed. Other than that, so far so good.
Edit: There's a time bug also as blackroseMD1 said.

Seems like it has the time bug too, where the clock will fall behind by minutes or hours (or freeze completely) after the phone has been put down for a while. Unfortunately that's a killer bug since it messes with alarms.

dbarrett480 said:
is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....
Click to expand...
Click to collapse
I am on AT&T and I was having the same issue on another rom. I believe it is because the roms are based off of the international version of the phone. I've only seen VOLTE work on the AT&T stock rom. To fix this I just called customer care and had them de-provision my line for VOLTE.

Dheyl said:
I am on AT&T and I was having the same issue on another rom. I believe it is because the roms are based off of the international version of the phone. I've only seen VOLTE work on the AT&T stock rom. To fix this I just called customer care and had them de-provision my line for VOLTE.
Click to expand...
Click to collapse
Many of the custom Roms support VoLTE. Ice does for sure and I think LeeDroid and ViperOne do too.

Is just me, or the device rumble doesn't work?

WalterCool said:
Is just me, or the device rumble doesn't work?
Click to expand...
Click to collapse
Works fine for me here on the latest nightly. I dirty flashed over yesterday's nightly.

blackroseMD1 said:
Works fine for me here on the latest nightly. I dirty flashed over yesterday's nightly.
Click to expand...
Click to collapse
But, you had to do something extra? I can see now the vibration options with latest nightly, but still no vibration. Even more, each vibration is giving me a kernel panic

Himalaya saxena said:
Good news for HTC One M9 (GSM) user it got first official Cyanogenmod 13 nightly rom based on android marshmallow 6.0 .
Who is ready to test it out. :fingers-crossed:
Source: http://www.gammerson.com/2015/12/download-official-cm13-for-htc-one-m9.html :good:
Click to expand...
Click to collapse
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.

LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Click to expand...
Click to collapse
Just wait for some stable built then it will be all fine.

excellent
installed it and its working very well except when i launch the camera and swipe to video mode it crashes. Also i have a magnetic car mount, when i mount the phone the display goes into Dot View and im not sure how to disable it

WalterCool said:
But, you had to do something extra? I can see now the vibration options with latest nightly, but still no vibration. Even more, each vibration is giving me a kernel panic
Click to expand...
Click to collapse
No, I didn't have to do anything extra. Vibration worked out of the box for me.
LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Click to expand...
Click to collapse
Try going into Developer Options and then going to "Select USB Configuration". Usually changing that to Audio Device and then back to MTP makes the internal SD show up on my PC.

blackroseMD1 said:
No, I didn't have to do anything extra. Vibration worked out of the box for me.
Try going into Developer Options and then going to "Select USB Configuration". Usually changing that to Audio Device and then back to MTP makes the internal SD show up on my PC.
Click to expand...
Click to collapse
It works for me as well, thanks!

I have not tested CM13 yet... how does it look like? are there still a lot of missing things?

Sailfish OS on the bullhead

edit: latest 14.1 base out with fixed camera and booting
edit: alpha6 is out, sensors fixed, but camera is completely broken
So I finally have a decent enough port of SFOS on bullhead
https://www.youtube.com/watch?v=OKWHeTUiU34
Thats an old video but a quick demo.
http://images.devaamo.fi/sfe/bullhead/
images can be retrieved from the above
Flash the latest stock image for your base and boot into it. for android 7 thats 7.1.2 (N2G48C, Aug 2017) and android 6 thats 6.0.1 (MTC20K)
Reboot to twrp
Format data
Reboot to twrp again
copy over the zips
flash cm or lineage from prefered base, but 14.1 is better.
Flash sfos zip
Working
Audio
Calls
Texts
Data
Wifi
Camera
Sensors
Not Working :~( :
Fingerprint scanner
Bluetooth
Click to expand...
Click to collapse
Issue with install apps from the app store or warehouse?
need to setup password in developer options
devel-su pkcon refresh
Click to expand...
Click to collapse
also since store is sometimes a bit meh, you can use
https://openrepos.net/content/basil/warehouse-sailfishos
best way to copy files onto device is through ssh, setup password in developer options
store is sometimes broken, you need to do devel-su pkcon refresh in terminal, need to set password up in developer options.
OTA - Over the Air update
Best way to update SailfishOS is by using an ssh connection to the phone.
Disable all patches and Openrepos repositories before updating.
Before updating use
Set desired release version, for example 2.2.0.29:
ssu release 2.2.0.29
Click to expand...
Click to collapse
Refresh the package cache:
devel-su pkcon refresh
Click to expand...
Click to collapse
Upgrade SailfishOS:
version --dup
Click to expand...
Click to collapse
Reboot the phone and enjoy the new release.
this wouldnt of been possible from the immense amount of help from the guys @freenode#sailfishos-porters

Really nice job! hope we can get all working in near future

Awesome cant wait to see stable build!
Sent from my Nexus 5X using Tapatalk

Can this be installed with multirom as secondary rom?

m4r0v3r said:
So I finally have a decent enough port of SFOS on bullhead
https://www.youtube.com/watch?v=OKWHeTUiU34
Thats an old video but a quick demo.
http://images.devaamo.fi/sfe/bullhead/
images can be retrieved from the above
Click to expand...
Click to collapse
Nice job, fingers crossed for getting other features to work!
btw. which vendor to use with it?

latest 6.0.1

fnldstntn said:
Can this be installed with multirom as secondary rom?
Click to expand...
Click to collapse
never tried it, didnt know we had a multirom stable.
on hammerhead it works fine as 2nd rom.

Holy crap this is awesome! I was waiting for a sailfish os port since I switched from my nexus 4. Is there a way for me (as an non-coder) to help you out somehow?
Oh and do you think it is possible that camera will work in the future or is this a missing driver code thing?

m4r0v3r said:
never tried it, didnt know we had a multirom stable.
on hammerhead it works fine as 2nd rom.
Click to expand...
Click to collapse
Yes there is a stable multurom on jolla kernel tread but in that case probably i will need to use the cm13 as primery rom to becouse of the vendor.

OMG a New Rom i don't know sailfish Os wow i go to try it
Thank you very much for your work

Really nice, sadly i need the camera for my work so i cant use as DD

Renaf2 said:
OMG a New Rom i don't know sailfish Os wow i go to try it
Thank you very much for your work
Click to expand...
Click to collapse
Not a rom, it is a completely different operating system so no android apps.

giantflash said:
Holy crap this is awesome! I was waiting for a sailfish os port since I switched from my nexus 4. Is there a way for me (as an non-coder) to help you out somehow?
Oh and do you think it is possible that camera will work in the future or is this a missing driver code thing?
Click to expand...
Click to collapse
the camera thing is a 32bit/64bit issue atm so i'll see were I get with it, am also messing around trying to get sfos working on a Huawei P9
No android apps at all, we have sfdroid, but its not working on cm13 as far as I know.

Very cool indeed, def hope this goes further. Remember it on N5 and was awesome

It's a nice ROM. But on my N5X the WiFi and Data isn't working.So sad.

justf0127 said:
It's a nice ROM. But on my N5X the WiFi and Data isn't working.So sad.
Click to expand...
Click to collapse
That was my fault, issue with PARANOID_ANDROID. New image thats been upped should fix the issue

Ah... So it seems that its source is based on cm13 built in 161222, then should I use December mm vendor or January mm vendor?
(Sorry for my bad English...)

Riskypedia said:
Ah... So it seems that its source is based on cm13 built in 161222, then should I use December mm vendor or January mm vendor?
(Sorry for my bad English...)
Click to expand...
Click to collapse
December probably.

And I know I'm bothering, but another question...
Is this rom doesn't contain boot animation? Cuz I saw cm13 booted well, but after flashing this over cm13 I can't see anything except google logo. Should I set my bootloader to the latest one?

6.0.1 (MTC20L) is what am using

Dual Booting

Hi, anyone looking to dual boot ROMs on their Galaxy S7 I have made a short 10 minute video on how to do it, I hope this helps people out!
Link to app : https://dbp.noobdev.io

For wat varient

A month ago came from nexus 5 world and I'm big time missing MultiROM. Thank you for the app
However, while installing secondary patched ROM in TWRP, I've got Error 1 - while installing both Lineage OS and AOSP Extended.
I wonder where I can error messages codes to figure our what's wrong with my setup.
Upd. 1 - just checked free space and /system got 0B.
- Does that explains error 1 message (see above)
- how I can free space on /system partition
- How I can get more space on /system partition - to be able to use this app? In other words, do I need to play around with PIT file? Or how else (and more safely) I can extend /system at the cost of interbal storage?

starche_old said:
A month ago came from nexus 5 world and I'm big time missing MultiROM. Thank you for the app
However, while installing secondary patched ROM in TWRP, I've got Error 1 - while installing both Lineage OS and AOSP Extended.
I wonder where I can error messages codes to figure our what's wrong with my setup.
Upd. 1 - just checked free space and /system got 0B.
- Does that explains error 1 message (see above)
- how I can free space on /system partition
- How I can get more space on /system partition - to be able to use this app? In other words, do I need to play around with PIT file? Or how else (and more safely) I can extend /system at the cost of interbal storage?
Click to expand...
Click to collapse
I'm not completely sure how to resize system partition but have you got a very large sized ROM installed? I was running superman ROM and still had more than enough space to install it. You could try to download an app like system app uninstalled and either delete apps like Facebook and install them again from the playstore if they are installed as system apps or delete very rarely used apps like SHealth (just an example, I don't use my S Health but you might)

miko12312 said:
For wat varient
Click to expand...
Click to collapse
I am using the G930F but it will work on all S7 exynos variants.
Here is a list of the supported devices :
https://dbp.noobdev.io/supported_devices.html

dylanneve1 said:
I'm not completely sure how to resize system partition but have you got a very large sized ROM installed? I was running superman ROM and still had more than enough space to install it. You could try to download an app like system app uninstalled and either delete apps like Facebook and install them again from the playstore if they are installed as system apps or delete very rarely used apps like SHealth (just an example, I don't use my S Health but you might)
Click to expand...
Click to collapse
Yes I do. But it still shows 0. I deleted quite a few apps, but no luck.

dylanneve1 said:
I am using the G930F but it will work on all S7 exynos variants.
Here is a list of the supported devices :
https://dbp.noobdev.io/supported_devices.html
Click to expand...
Click to collapse
So this will not work for the qualcomm devices , there is a way to use roms on a locked bootloader but unsure how on the s7 ,its on the redmi device , thus has been tested on

miko12312 said:
So this will not work for the qualcomm devices , there is a way to use roms on a locked bootloader but unsure how on the s7 ,its on the redmi device , thus has been tested on
Click to expand...
Click to collapse
I doubt it, without a fully working recovery it isn't possible. I could be wrong, there might be a way, but I wouldn't count on it.

starche_old said:
Yes I do. But it still shows 0. I deleted quite a few apps, but no luck.
Click to expand...
Click to collapse
Are you running stock or custom ROM already?

dylanneve1 said:
Are you running stock or custom ROM already?
Click to expand...
Click to collapse
Stock MM, model number is 930W8

starche_old said:
Stock MM, model number is 930W8
Click to expand...
Click to collapse
If you really want to maybe install a ROM like superman ROM and try it. It might be a problem with the ROM

dylanneve1 said:
If you really want to maybe install a ROM like superman ROM and try it. It might be a problem with the ROM
Click to expand...
Click to collapse
What do you mean - the problem with current ROM?
BTW, I tried to flash aosp rom

starche_old said:
What do you mean - the problem with current ROM?
BTW, I tried to flash aosp rom
Click to expand...
Click to collapse
If you are using the stock Samsung firmware maybe it is causing issues, if you tried flashing something like Hydrarom or Superman ROM it might work

dylanneve1 said:
If you are using the stock Samsung firmware maybe it is causing issues, if you tried flashing something like Hydrarom or Superman ROM it might work
Click to expand...
Click to collapse
While been a flash-o-holic, I tried that. But while there are no official ROMs for for 930W8, thus there is no proper CSC. That screwing up my modem big times. I'm not sure what's wrong, but after ANY N ROM I do not have network connection.

starche_old said:
While been a flash-o-holic, I tried that. But while there are no official ROMs for for 930W8, thus there is no proper CSC. That screwing up my modem big times. I'm not sure what's wrong, but after ANY N ROM I do not have network connection.
Click to expand...
Click to collapse
Might be that then if there are no official ROMs, I'm really not sure, I've seen this work definitely on SM-G930F/G935F and dual sim models but I'm not sure about 930W8, really sorry

dylanneve1 said:
Might be that then if there are no official ROMs, I'm really not sure, I've seen this work definitely on SM-G930F/G935F and dual sim models but I'm not sure about 930W8, really sorry
Click to expand...
Click to collapse
No worries, buddy, it's all good. I'm waiting for official ROM and than I'll play this game

starche_old said:
No worries, buddy, it's all good. I'm waiting for official ROM and than I'll play this game
Click to expand...
Click to collapse
Good luck , sorry I couldn't be more help with it

What if i want to flash a kernel for secondary rom?

skivnit said:
What if i want to flash a kernel for secondary rom?
Click to expand...
Click to collapse
It should work, just flash the kernel in the secondary ROM slot.

dylanneve1 said:
It should work, just flash the kernel in the secondary ROM slot.
Click to expand...
Click to collapse
It did not work for me.

Treble for U11

First I'm not the original post, and my English is not very wll,so plz be nice? here is the original post link
https://m.weibo.cn/detail/4292884486628928
And here is download link, injoy it
https://mega.nz/#F!ZjJ3iSZR!23Niltn4uLsOK5uRB_AwtQ
This google camera I shared, it support pixel3 night sight. You guys should try it it's so awesome
https://mega.nz/#!FnwmwKbD!FjM8EOnBE1oPDpJWRQbzO8StR-H2VYHw8LXsGCQAg8c

Installation instructions
- Download All the files
- install treble twrp recovery
- Take a backup
- Wipe cache
- Wipe dalvik cache
- wipe system
- wipe data
- flash vendor&PT firmware
- flash treble system.img (download your prefer os,if you don't know what it is then Google it )
- Reboot
- Enjoy!

Thank you catman
But whit out installation instructions , which order , i don't think any one dares. Flashing these files, no matter how ichy we all are trying it, a number of things could easily brik our phone's in a way there's no returning from, so if you could share all you know , it might help , in somebody dare trying it
Edit:
thx
But what is the meaning by this treble, I now I should google it, but these things we can already do, I mean OEM is easy installing, maybe in a different way, but what is new. Easier with treble?
Oh got it
https://www.google.com/amp/s/www.androidauthority.com/project-treble-818225/amp/
Nice if you like stock, but I don't and would never install it, if any aosp is out or custom ROMs available for my device, stock sucks big time.

spoonymoon said:
Thank you catman
But whit out installation instructions , which order , i don't think any one dares. Flashing these files, no matter how ichy we all are trying it, a number of things could easily brik our phone's in a way there's no returning from, so if you could share all you know , it might help , in somebody dare trying it
Click to expand...
Click to collapse
Already post it, and somebody did tried to flash it and it works great , only one problem it did not support Android P

I tried them and it works
Problems i faced.
Home button didnt work
charge led didnt work
couple of other things...
I got aosp, rr, pixelexperience working.

miffymiffy said:
I tried them and it works
Problems i faced.
Home button didnt work
charge led didnt work
couple of other things...
I got aosp, rr, pixelexperience working.
Click to expand...
Click to collapse
Sometimes **** happened but it just started and the original poster says it will keep updating so don't worry about it, BTW did you flash the official or homemade(???)

spoonymoon said:
Thank you catman
But whit out installation instructions , which order , i don't think any one dares. Flashing these files, no matter how ichy we all are trying it, a number of things could easily brik our phone's in a way there's no returning from, so if you could share all you know , it might help , in somebody dare trying it
Edit:
thx
But what is the meaning by this treble, I now I should google it, but these things we can already do, I mean OEM is easy installing, maybe in a different way, but what is new. Easier with treble?
Oh got it
https://www.google.com/amp/s/www.androidauthority.com/project-treble-818225/amp/
Nice if you like stock, but I don't and would never install it, if any aosp is out or custom ROMs available for my device, stock sucks big time.
Click to expand...
Click to collapse
I think the meaning Is about experience, It always good thing to experience new things,and There is alot of customazi os you can choose , like rr los axe aicp............

cartman56 said:
Sometimes **** happened but it just started and the original poster says it will keep updating so don't worry about it, BTW did you flash the official or homemade(???)
Click to expand...
Click to collapse
I did both. Suns one from the weibo link you posted is the one that works.

miffymiffy said:
I did both. Suns one from the weibo link you posted is the one that works.
Click to expand...
Click to collapse
All of them the home button didn't work?

Thx guys
Roms compatible with treble are links in weibo link posted by op?
I might not have looked probably

spoonymoon said:
Thx guys
Roms compatible with treble are links in weibo link posted by op?
I might not have looked probably
Click to expand...
Click to collapse
My English not taht well so I'm not sure what you mean, if you ask about who is the creater, i can tell you that isn't me, i just sharing his works that is all ? and the weibo link is straight to op?

I mean where is links to ROMs?
Its all Chinese... And I'm a bit Rusty there :laugh:

spoonymoon said:
Thx guys
Roms compatible with treble are links in weibo link posted by op?
I might not have looked probably
Click to expand...
Click to collapse
The roms that are compatible are GSI 8.1 roms. Others don't work.
How I got it to work;
Flash twrp with treble support. Reboot to recovery.
Flash both vendor zips, reboot to recovery
Flash U11 treble zip, reboot to recovery
Flash Oreo GSI system image of your liking from https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Flash U11 selinux zip. Reboot.
It should boot.
Also, make sure you backup in twrp beforehand as if it's not what you want, you can just restore.
For pixelexperience, I had issues with gapps verification. It wouldn't let me get around it.

spoonymoon said:
I mean where is links to ROMs?
Its all Chinese... And I'm a bit Rusty there :laugh:
Click to expand...
Click to collapse
Search project treble inside XDA

miffymiffy said:
The roms that are compatible are GSI 8.1 roms. Others don't work.
How I got it to work;
Flash twrp with treble support. Reboot to recovery.
Flash both vendor zips, reboot to recovery
Flash U11 treble zip, reboot to recovery
Flash Oreo GSI system image of your liking from https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Flash U11 selinux zip. Reboot.
It should boot.
Also, make sure you backup in twrp beforehand as if it's not what you want, you can just restore.
For pixelexperience, I had issues with gapps verification. It wouldn't let me get around it.
Click to expand...
Click to collapse
Thx miffy
Do you mean backup in New twrp, or old, i assume old backups won't work anymore?
And is it right what treple checker says that our device i a device with only one partition, thus only flash a images , with gapps?
And treple check says no treble support, but that is because i didn't flash zips yet surely
And which roms would you recommend?
Are all gsi images compatible with our htc u 11 ?
I'm on rr and not stock, magisk installed, does this matter?
Sorry for all the q but better sure than sorry

Don't work on HTC U11 Dual (A07)

vladislav1611 said:
Don't work on HTC U11 Dual (A07)
Click to expand...
Click to collapse
Having What problems

cartman56 said:
Having What problems
Click to expand...
Click to collapse
After flash the GSI image phone stays on HTC logo. Next problem is that phone can't recognise the internal storage when you try to do something on TWRP. Of course, I flashed the selunix zip on the last step. Tested PixelExpirience and AOSP, Android 8.1, A-only

vladislav1611 said:
After flash the GSI image phone stays on HTC logo. Next problem is that phone can't recognise the internal storage when you try to do something on TWRP. Of course, I flashed the selunix zip on the last step. Tested PixelExpirience and AOSP, Android 8.1, A-only
Click to expand...
Click to collapse
Did you do Clean flash before you flash GSI? and after the flash GSI you should do a FACTORY RESET

cartman56 said:
Did you do Clean flash before you flash GSI? and after the flash GSI you should do a FACTORY RESET
Click to expand...
Click to collapse
The first one i did but the second one no. Thanks. I'll try tomorrow again.

Android Pie GSI on V20 (Havoc OS)

Is anybody interested/tried to install custom GSI Havoc OS ROM?
I browsed around and couldn't find anyone who tried it.
I found some instructions about it, but not sure if our device really supports this...
Links:
Official Havoc OS:https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-havoc-os-t3930030
P.S. am I the only one who still uses V20 in 2019?

this would be great @x86cpu you should definitely check this out!

i dont mind trying it out. But which file should i download?
So i tried to flash arm64-a file and I can see the android logo for sec then, the device boots into fastboot mode..

second screen is working or not?

luitAayush said:
second screen is working or not?
Click to expand...
Click to collapse
Probably not because It hasn't even been tested.

Deadmeat03 said:
i dont mind trying it out. But which file should i download?
So i tried to flash arm64-a file and I can see the android logo for sec then, the device boots into fastboot mode..
Click to expand...
Click to collapse
i95swervin said:
Officially, No the v20 doesn't support GSI's
Theoretically, Yes. I was speaking to a Dev for the device I am currently daily driving and he said that " los 16 is using a treble vendor so a system A GSI should work " I haven't tested this theory simply because I have a ARB1 H918 device and don't feel like bricking.
I am curious about it though.. So anyone on Lineage 16 feel like trying? lol. Or maybe @x86cpu could chime in on this matter.
P.S. I still use my v20 as a media device and still find daily use for it but not as a phone ATM in 2019.
Click to expand...
Click to collapse
Lineage 16 for the V20 doesn't use a Treble /vendor partition. This won't work until/unless that changes.