Related
Hi,
I have a very big problem.
After I’ve flashed this rom (Unofficial cm13 Mr. Coldbird), the fingerprint sensor disappeared from the settings
How can I fix it?
P.s
It 's my first message , I hope I used the correct section of the forum
Do you flash mm-firmware.zip?
for me it works sometimes and sometimes keep hanging " just vibrating without unlock " .. sometimes it says " hardware is not found "
i entered the recovery and flashed mm-firmware.zip again and the same problem exist ... i'm thinking to back to COS 12.1 it was working perfectly !
I have exactly the same problem, fingerprint option totally disappeared from my lockscreen settings. No idea how to fix it.
Shivver said:
I have exactly the same problem, fingerprint option totally disappeared from my lockscreen settings. No idea how to fix it.
Click to expand...
Click to collapse
when I'm looking for a setting, that I can't find in the settings dialog, I'm using the search function, there. This showed already quite some features.
I'm still on original Cyanogen OS 12.1 (5.1.1), though...
best regards
m
meikelrix said:
when I'm looking for a setting, that I can't find in the settings dialog, I'm using the search function, there. This showed already quite some features.
I'm still on original Cyanogen OS 12.1 (5.1.1), though...
best regards
m
Click to expand...
Click to collapse
Install mm firmware.zip
Sent from Zuk Z1 using Tapatalk
Same Problem here.. In cm13 official and Mr coldbirds Version.. Even with installing mmfirmware.zip
I have the same problem too. It have tested on official CM13 and om Mr.Colbird CM13 versions.
me too
the problem of vibrating that was because of third party app like " screen lock " but if you locked it with power button or double tap the fingerprint sensor will work perfectly :good:
I happen the same. Since I installed unofficial CM 13 (Mr. Coldbird) fingerprint sensor has disappeared.
I have even tried to solve it installing stock COS with qfil, but although the app has appeared again, the sensor doesn't work. I put the finger on it, but no signal arrives to the phone.
I have tried hard reset, install mmfimware, official CM 12 and 13, unofficial 13, but nothing work.
Any idea? Thanks.
Vfc73 said:
I happen the same. Since I installed unofficial CM 13 (Mr. Coldbird) fingerprint sensor has disappeared.
I have even tried to solve it installing stock COS with qfil, but although the app has appeared again, the sensor doesn't work. I put the finger on it, but no signal arrives to the phone.
I have tried hard reset, install mmfimware, official CM 12 and 13, unofficial 13, but nothing work.
Any idea? Thanks.
Click to expand...
Click to collapse
Try this method I have described earlier. It has recovered my Fingerprints already twice. Also because of trying unofficilal cm13. http://forum.xda-developers.com/showpost.php?p=64742948&postcount=2
Planet X said:
Try this method I have described earlier. It has recovered my Fingerprints already twice. Also because of trying unofficilal cm13. http://forum.xda-developers.com/showpost.php?p=64742948&postcount=2
Click to expand...
Click to collapse
I'll try and report. Thanks!!!
I've tries, but it hasn't worked.
Just one question, how do you exit fastboot mode?. I'm a beginner, sorry.
Vfc73 said:
I've tries, but it hasn't worked.
Just one question, how do you exit fastboot mode?. I'm a beginner, sorry.
Click to expand...
Click to collapse
Fastboot reboot or just press the power button until the phone shut down. I don't know went it didn't help you but i have recovered my fingerprint reader already twice with that procedure. You will lose nothing when just flashing the modem and the bootloader. My guess is that the persist.img is the partition you need to restore for the fingerprints. My fingerprint reader has been acted really crazy when i tried the unofficial cm13. Until it stopped working. I restored my backup and did the procedure to recover my fingerprint reader. I'm now on self built odexed cm13 nightly 's with working fingerprint reader.
Stopped working here too. Tried to restore COS but even if the setting is there, fingerprint doesn't get detected (phone keeps vibrating)
simoneser said:
Stopped working here too. Tried to restore COS but even if the setting is there, fingerprint doesn't get detected (phone keeps vibrating)
Click to expand...
Click to collapse
Read my post above. I have recovered two times from this issue. I had it also because of trying unofficial cm13. You will loose nothing but get back your fingerprints.
I have tried but it doesn't work
Inviato dal mio Z1 utilizzando Tapatalk
I have tried too, but it doesn't work.
Vfc73 said:
I have tried too, but it doesn't work.
Click to expand...
Click to collapse
Yesterday my fingerprint stopped again too. So I did the same procedure again and it didn't work anymore for me too. So I tried to flash the official cm13 again. First it didn't work but after a few minutes it started to work again. I really don't know how this is possible but there is one difference. The radio from official cm13 is newer than the one from COS. I'm happy that it works fine again but I'm afraid it will stop again when I try a different rom again.
Just as the title says, after flashing the bootstack, rom and gapps countless times, i still dont have auto rotate or auto brighness. all the sensors seem to be dead except for wifi, gps and mobile network. did anyone else experience this? how did you resolve it??? please help!!
I had the same problem after dirty flashing from 13.1. I did a factory reset and reflashed and all was well.
whoiswes said:
I had the same problem after dirty flashing from 13.1. I did a factory reset and reflashed and all was well.
Click to expand...
Click to collapse
thanks for the reply. i did a clean flash. didnt work.
i flashed the boostack, rebooted back to recovery, flashed the rom and gapps, wiped cache and rebooted. it boots fine. but then i still dont have auto rotate. seems like the drivers werent installed or something
Obvious questions, but did you check the rotation settings inside the display menu? Also, is Adaptive brightness toggled on?
MiMtnBiker said:
Obvious questions, but did you check the rotation settings inside the display menu? Also, is Adaptive brightness toggled on?
Click to expand...
Click to collapse
i did. i installed an app that checks the phones sensors. they are all undetected. i think its a driver issue. i'm at my wits end
crazynitro said:
i did. i installed an app that checks the phones sensors. they are all undetected. i think its a driver issue. i'm at my wits end
Click to expand...
Click to collapse
Check the md5 on your download to make sure it is not bad Install twrp 3.0.4.0 you could also move everything you want to keep to a sdcard so you can do a total wipe. Now install rom and gapps only and check to see how everything works before adding root or apps.
crazynitro said:
Just as the title says, after flashing the bootstack, rom and gapps countless times, i still dont have auto rotate or auto brighness. all the sensors seem to be dead except for wifi, gps and mobile network. did anyone else experience this? how did you resolve it??? please help!!
Click to expand...
Click to collapse
This is an old thread, but I am hoping you found a fix for these issues. I am having the same issue. If you have a solution to share I would greatly appreciate it.
lkiefer said:
This is an old thread, but I am hoping you found a fix for these issues. I am having the same issue. If you have a solution to share I would greatly appreciate it.
Click to expand...
Click to collapse
I lost my phone so i currently have another one. i can t remember what i did to fix it though
crazynitro said:
I lost my phone so i currently have another one. i can t remember what i did to fix it though
Click to expand...
Click to collapse
That's a drag. Thanks for the quick response though.
Hello, I also have an issue with the accelerometer (and by consequence the auto rotate function).
I am on full stock Nougat B09 (no root) and the issue was also present on B06.
Rebooting the device solve the issue, and factory reset does not make this bug disappear.
That being said, I think I located the root cause.
The magnetometer seems to be never working, even after a reboot. When an app wants to use the magnetometer (like Google map, or the compass), it make the accelerometer crash....
Anyone else having this issue ?
Does you magnetometer works flawlessly ?
Thanks.
@arachneon,
Hi, you can change it in the tools---compass, and in that compass you can waggle the phone in the way of "8", if all that cannot fixed you can also seek help in the nearby ZTE after sales service repair center. Thanks!
https://download.mokeedev.com/?device=zoom
Does someone try this rom? If u ever on this rom, can u give a feedback about the rom..? I would like to know your opinion..
X10MINISTER said:
Does someone try this rom? If u ever on this rom, can u give a feedback about the rom..? I would like to know your opinion..
Click to expand...
Click to collapse
Rom works but it wasn't maintained. No new bug correction from february.
stuccamelo said:
Rom works but it wasn't maintained. No new bug correction from february.
Click to expand...
Click to collapse
Thanks for sharing ur opinion/experiences on this rom.. Im running on latest build of this mokee rom, i think it is suitable for daily driver..but I got some problem with hotspot(maybe it is because of mod that i've installed).. Maybe u got some solution on this
X10MINISTER said:
Thanks for sharing ur opinion/experiences on this rom.. Im running on latest build of this mokee rom, i think it is suitable for daily driver..but I got some problem with hotspot(maybe it is because of mod that i've installed).. Maybe u got some solution on this
Click to expand...
Click to collapse
Sorry no solution I have big problem with gmaps doesn't recalculate path after initial path and play store give "not compatible device" error in some apps.
Good thing battery drain is very very good
stuccamelo said:
Sorry no solution I have big problem with gmaps doesn't recalculate path after initial path and play store give "not compatible device" error in some apps.
Good thing battery drain is very very good
Click to expand...
Click to collapse
So, it mean that u also facing the hotspot problem.?
Can u change/install fonts in mokee roms? Cause I have an issue with changing font style using iFont apps..its say installed but after reboot font style doesnt change. Any solution?
linux shall eternally bloat all search engines with expired ?=
as it is stated in the title: the internet is full of long expired conversations about issues which are gone, along with hardware.
back in the beginning i recall only one distro Dev, SimplyMepis, who always, promptly warned, that most if not all information online about Linux is outdated or incorrect.
now on mokee, has anyone tested mokee naugat on vibe shot as recent as September/October 2017? The reason I ask is because there are no reviews or any useful feedback on mokee download/changelog page. I used it in August and each time the phone disconnect from WiFi it would reboot with an ugly, annoying double beep.
Apart from this issue everything would work pefectly well, including both sim loaded.
Thanks for taking time to respond.
Dr Tungsten said:
as it is stated in the title: the internet is full of long expired conversations about issues which are gone, along with hardware.
back in the beginning i recall only one distro Dev, SimplyMepis, who always, promptly warned, that most if not all information online about Linux is outdated or incorrect.
now on mokee, has anyone tested mokee naugat on vibe shot as recent as September/October 2017? The reason I ask is because there are no reviews or any useful feedback on mokee download/changelog page. I used it in August and each time the phone disconnect from WiFi it would reboot with an ugly, annoying double beep.
Apart from this issue everything would work pefectly well, including both sim loaded.
Thanks for taking time to respond.
Click to expand...
Click to collapse
There are a lot of recent updates for this rom. I flashed the most recent (2017-11-21 date). I didn't make a lot of testing but the problem you refered has been solved and the performance and stability seems good.
The only issue I noticed so far is that the phone does not start automatically from the shutdown state when an alarm is set.
@piccolo2k2 Was your device flagged as certified? When I flushed the rom I wasn't able to pass the SafetyNet test and I would appear as uncertified in play store, meaning I couldn't download most apps like Messenger or Facebook. I installed a third party app store which worked fine, but YouTube wouldn't play any video, because it couldn't load any ads... I even tried Magisk with no luck..
GeorgeTsak said:
@piccolo2k2 Was your device flagged as certified? When I flushed the rom I wasn't able to pass the SafetyNet test and I would appear as uncertified in play store, meaning I couldn't download most apps like Messenger or Facebook. I installed a third party app store which worked fine, but YouTube wouldn't play any video, because it couldn't load any ads... I even tried Magisk with no luck..
Click to expand...
Click to collapse
This is not my main phone right now so I spend very limited time using or testing it but you are right, I have just checked that with this ROM the device is unable to pass the SafeNet test so far. On the other hand I have not problems at all playing videos with youtube app or rooting the device. I'm using supersu v2.82 and TRWP-3.0.2-0 for lenovo 6.0 by wzsx150 (didn't try Magisk)
has anyone managed to install this ROM?
i tried to install it but failed.
I unlocked the bootloader using the method described here, and installed TWRP recovery as described here
when i try to install it - the flashing is stopped by a long vibration and the device went off, i tried to debug the flashing process, it seems that the step of mounting "\system" fails, i tried to replace the mount/unmount calls from updater_script with respective run_program(busybox) commands, but had no success with that. when i'm using the TWRP build in funcitonlity to wipe the system partition, TWRP claims the operation was successful, but checking the system partition details shows that the partition still contains data.
ohh, and also - the device model seems strange, the script checked that the model is zoom_tdd (or something like that) but the device (the bootloader?) return Z90a40... (i also updated the script to check for Z90a40)
the current state is that the device won't boot, but i can get into recovery.
Anyone have an idea how to proceed?
Thanks.
mrtowel said:
i tried to install it but failed.
I unlocked the bootloader using the method described here, and installed TWRP recovery as described here
when i try to install it - the flashing is stopped by a long vibration and the device went off, i tried to debug the flashing process, it seems that the step of mounting "\system" fails, i tried to replace the mount/unmount calls from updater_script with respective run_program(busybox) commands, but had no success with that. when i'm using the TWRP build in funcitonlity to wipe the system partition, TWRP claims the operation was successful, but checking the system partition details shows that the partition still contains data.
ohh, and also - the device model seems strange, the script checked that the model is zoom_tdd (or something like that) but the device (the bootloader?) return Z90a40... (i also updated the script to check for Z90a40)
the current state is that the device won't boot, but i can get into recovery.
Anyone have an idea how to proceed?
Thanks.
Click to expand...
Click to collapse
I think you need a different TWRP version. Try this one:
https://drive.google.com/file/d/0B1Sms71Oe6FIQnl4STlhSk96b0E/view?usp=sharing
Help me!
I'm new to these things. Installing roms and ****s. Can someone help me with the step by step procedure of installing this room on my Lenovo vibe shot. Thanks in advance.
The same probvlem with TWRP
piccolo2k2 said:
I think you need a different TWRP version. Try this one:
Click to expand...
Click to collapse
I have exactly the same problem.
Did you resolved it? Tried also mentioned "Twrp by rahul.rar", but the same problem - unable to mount /system partition.
Thanks for reply,
st
bug fix?
does anybody tested it?
is it still any bug on release version MK71.2-zoom-180914-RELEASE?
hhaekal said:
does anybody tested it?
is it still any bug on release version MK71.2-zoom-180914-RELEASE?
Click to expand...
Click to collapse
Im using it right now.. Im still have the problem with:
-hotspot tethering,bluetooth tethering
-usb mtp
-suddenly shutdown when on wifi
Have someone had the problem with delay in receiving whatsapp messages?
Hello,
has anyone tested the MK71.2-zoom-181107-RELEASE version? Is the bug with the WiFi still there?
Alex_135 said:
Hello,
has anyone tested the MK71.2-zoom-181107-RELEASE version? Is the bug with the WiFi still there?
Click to expand...
Click to collapse
Hi,
I'm using the release and there is no bug with WIFI.
Linaxx said:
Hi,
I'm using the release and there is no bug with WIFI.
Click to expand...
Click to collapse
How about wifi tethering problem? Does it remain error when wifi tethering are enabled?
Hello all!
I have been struggling for a couple of weeks now with my MXP, it suddenly stopped auto rotating everything (All stock apps, desktop, installed apps), tried several fixes including cache cleaning, uninstalling recent updates, sensor fix tool apps (like Quick TuneUp), the issue appeared after the Nougat 7.1.1 update (NDP26.48-24-1) but I don't think it is related to it because it was working fine after I patched with the OTA.
Update: I found out that the accelerometer works correctly using Spirit Level app, I already factory reset my device 2 times with no change.
Hope someone can give me some light!
My x play in that all sensors are not working pls provide some solution....
Silverian said:
[...] my MXP, it suddenly stopped auto rotating everything[...]
Click to expand...
Click to collapse
Did you check settings/display/rotate screen?
Don't know the exact wording, my device shows German.
Awesome kernel. Everything works fine. LOS 14.1
tag68 said:
Did you check settings/display/rotate screen?
Don't know the exact wording, my device shows German.
Click to expand...
Click to collapse
I did, that was the first thing to check.
Hi,
So I have had some trouble with the fingerprint scanner on my OnePlus 8 Pro. So I followed the persist.img fix guide but unfortunately the issue was not fixed. I assumed that this would mean the phone had no chance of regaining the use of fingerprint scanner. But I decided to reflash with msm as the guide requires and follow all the steps from the beginning again. Still no luck.
The third time, instead of replacing the data and engineermode (not replacing gf_persist.so) as the guide says, I just tried using the fingerprint scanner. It worked perfectly. I could enroll new fingerprints and even use them to unlock as usual. The issue is that this only lasts until the next shutdown/reboot. After that, I must redo the fingerprint test (and fail it) to regain use of fingerprint.
Can anybody recommend some sort of solution for this. I would like to be able to run lineage on here as I have on other phones in the past but I dont think i'm able to use the fingerprint test in the phone app as I can while running oxygen. Thanks for any help.
I have the same problem. Any solutions?
zioloiso said:
I have the same problem. Any solutions?
Click to expand...
Click to collapse
No, still nothing. Tried following again and again but still no luck.
kaxp said:
No, still nothing. Tried following again and again but still no luck.
Click to expand...
Click to collapse
Its another solution, do you have magisk?
I have the same and on top of that my other sensors seem messed up as well...banging my head against the wall
I have no clean persist backup ...
Can anyone please send me their persist.img if you have Oneplus 8 Pro European version?
I know it might give me problems with the fingerprint sensor but at least the others would work..
Did you ever get your fingerprint scanner working? I know it's a long shot u seeing this reply since it's old lol. But Im having same issue after msm and upgrading to OS 13..