Hello, everyone!
I recently purchased an XTRONS unit (PQ9046BL). And have lots of questions which I'll probably post about later if I can't find answers digging around on my own.
But to start with I am curious. If you look at the two attached images. There appears to be a screen protector on this from the factory. I tried picking at it a little and it's on there pretty good (as I expect a screen protector should). The issue is (again you can see), that the edges are collecting a lot of dust and debris. Especially after swiping down from the top to get to my notification tray. So I want to remove it. But... before I went and got our my heat gun and gave this a proper effort. I paused and started to wonder if this film was actually not a screen protector at all, and actually part of the digitizer. After looking up replacement digitizers on aliexpress, it doesn't appear to be a digitizer as the replacements for sell seem to be the whole front glass of the unit.
Anyway, anyone else have one of these that didn't have that film on it? Or did yours and you removed it?
Thanks for the help!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, I know I am quite late to the party but did you possibly find out anything about your problem in the meantime? I am asking myself exactly the same question right now. Thanks for any help!
Echoletter said:
Hello, I know I am quite late to the party but did you possibly find out anything about your problem in the meantime? I am asking myself exactly the same question right now. Thanks for any help!
Click to expand...
Click to collapse
Yes, it was just a screen protector. I pulled it off.
Many thanks for your help!
I was wondering the same. Mine it's the same state as yours, and makes the screen hard to read from on bright sunlight. Might just give it go, I'm scared to peel mine off for the same reasons, lol.
Related
Hello people,
Today i broke the glass of my device and i m relly pissed,
so i try to find a reseller so i can fix it i m not going to tell
which page since i m not sure if i can post it.
So i found this
HTC HD2 Replacement LCD Display With Touch Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But if i m not wrong lcd display is the one that show the image and touchscreen
is a kind of plastic that is pasted on the lcd and what is with this broken glass.
If somebody could help me with this question or if not give a link to other reseller that also ship to europe.
Thanxxxxx in advance.
missing pic
Here is the missing pic hope it works this time.
If you broken just glass- digitizer. so you just buy new on ebay. If you broken lcd screen, too so buy lcd+digitizer.
just make sure you buy digitizer for your phone because there are two types of them. One you showed is an older type and there is newer "snap in" type.
like this-\/
img808.imageshack.us/img808/7756/1677174230.jpg
i cant put the picture because of 8 post block...
I broke the glass of my Leo last week as well, fixed now. I was lucky though, it was just the digitizer but when they were about to change it they did tell me that the digitizer and the lcd are so close and well pinned to each other that there was a risk they broke the lcd when trying to remove the digitizer so then I would have had to buy lcd +digitizer .. but it worked fine. Good luck!
Broke mine last October, covered it in a screen protector and its been fine ever since. The money saved not replacing it is in my "new hd2 for sam" fund, and you soon get used to the cracks, which can hardly be seen when the back light is on.
it happended wid my frnd too !
My Mytouch4g slipped out of my pocket as I was getting in the car last night and landed on concrete. Although there is no physical damage to the exterior of the phone, the screen now looks like this. If anyone has had this happen to them, is it fixable and if so what part do I need to fix it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look up Iphonerepair and mytouch4g in google.
I would give you the link, but being a new member I'm not allowed yet =D
Looked around a little bit and they look like the cheapest place out there; some guys at work have also used them, so I don't think they're going to sit there and try to rip you off (IE try to not send back phone etc etc)
Sorry couldn't be more help.
you need a new LCD bro. Have fun fixing that, just look it up on google, I m sure that there are plenty of videos on it
Sent from my HTC Glacier using Tapatalk
It's actually not as hard as it seems. First step is to buy the replacement. The second is to follow the videos online.
I just replaced a cracked glass on mine (the LCD was ok though). The tough part for you will be removing the unbroken glass and then putting it back on. Be careful not to heat the glass up too much and break your touch screen connector.
Another quick secret is that you can use a credit card to pop open your phone instead of those safe opener things people sell.
Good luck!
If your LCD is fine then replacing digitizer isn't really that difficult. I followed a guide I found on youtube and did it in about 15 minutes. No need for a special pliers like the other member mentioned, but you do need some precision screw drivers of different sizes.
Hi guys. I bought my N7 2 weeks ago and I think it has screen lift on the left side. Please look at the photos and tell me if I should send it to warranty. And one more question.. screen lifting is happening in time or it had been there since you bought it?
p.s:screen is covered by a protector film
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try tightening the screws on the side with the lift that worked for me and it did not take weeks for them to do the same thing
Sent from my Nexus 7 using Tapatalk 2
Will they send me another tablet or add some glue to my tab?
RobYyY said:
Will they send me another tablet or add some glue to my tab?
Click to expand...
Click to collapse
If you want to do it fast try tightening those screws, it worked for me too. Or of course you can send it back. They certainly won't add any glue, I don't think so. They'll replace the tablet or the screen.
Next time please use the search function, there are hundreds of threads about the screen lift.
Adinaky said:
If you want to do it fast try tightening those screws, it worked for me too. Or of course you can send it back. They certainly won't add any glue, I don't think so. They'll replace the tablet or the screen.
Next time please use the search function, there are hundreds of threads about the screen lift.
Click to expand...
Click to collapse
i know how to use search button.. but i wanted to post these photos.. to get your opinion
RobYyY said:
i know how to use search button.. but i wanted to post these photos.. to get your opinion
Click to expand...
Click to collapse
That's what I was talking about, the screen lift is the same for everyone. Some millimeters on the left side. This is the most common issue for our N7.
Anyway, I think you should tighten the screws. That's the simplest solution to the problem, because if you change it, there is chance for the replacement to have the same or maybe another issue.
Just noticed that on the left hand corner of the screen is a small shiny patch. It is not a scratch on the outside of the screen. It appears to be between the screen and the glass. Pictures don't do it justice. It is very noticeable outside, because it is very shiny. My question is, what is it and can I fix it? It is visible whether the LCD is on or not. Doesn't look like anything has cracked, or seeped in. Wasn't there earlier...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seems that the gorilla glas and your screen got off a little bit. Since they are glued together it could be the case. You must disassemble your device to know more
Looks like glue between digi and LCD had a failure. Is it a device you bought used?. If so whoever changed digi messed up on glue job. If its device you got new from google I would RMA......that is definitely a manufactures defect.
maulich said:
Looks like glue between digi and LCD had a failure. Is it a device you bought used?. If so whoever changed digi messed up on glue job. If its device you got new from google I would RMA......that is definitely a manufactures defect.
Click to expand...
Click to collapse
I bought almost new, nearly 1 year ago. Wasn't like that last week. Don't think I can RMA it to anyone. Guess if it gets worse I can replace the screen...
Thanks for the responses...
LG have 2 year warranty on all their phones, including nexus 4
DrFredPhD said:
LG have 2 year warranty on all their phones, including nexus 4
Click to expand...
Click to collapse
Yeah, I got in contact with LG support on Friday and they're getting back to me. Hopefully get a replacement screen.
I got my note 4 day after launch and yesterday morning a bubble showed up under the glass on the left top corner of the screen At first I though it was the screen protector that had a bubble underneath but after taking the screen protector off it is actually under the glass. The bubble is about half inch long by 1/8th inch wide or so. I couldn't find any info on anyone else with this problem. I went to Tmobile and they sent a replacement phone out right away. Anyway just seeing if anyone else has had this problem. There is no damage to the glass or screen just a bubble under the glass. XDA wont let me post photos in my posts yet so once I'm over 10 posts i'll put some pictures of it up.
Looks like glue wasn't cured right. Were you able to "push" bubble out by pressing on screen or is more like cured glue separated from glass?
Sent from my SM-N910T using XDA Free mobile app
Pressing on it doesn't make the bubble go away or change shape in any way.
be good if some way we can see a picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
There it finally allowed me to post photos.
yeah that's a strange one! Only thing I can think of is that it was there when you first bought it, but it was too small for you take notice until it got bigger!
Exchange!
This is the adhesive that fuses the LCD panel to the glass digitizer separating. Definitely a factory defect and definitely get it exchanged. This should not be happening.
Mine is separating in the same spot. Can only see it when the light it on it just right, hasn't gotten as bad as yours yet
Inb4 bubblegate