Hello.
I have a problem with my mobile (LG G3 vigor LS885 sprint), You can see to image "Pic_1" which appear this problem when I try to reboot the mobile whereas show some lines about fastboot and I want to alert you about the mobile not show on PC (only show a message about connecting with unknow device) though I installed some drivers LG mobile on PC.
I searched about this problem and I tried to solve it by some solves, such as: make a factory reset for the mobile but show alert about can't format the mobile, then I tried to access to download mode but in it showed same these lines (please see to image: Pic_2), also I tried use LGUP but I can't use it because not access to the port after connected mobile with PC, also I used ADB but here also mobile not show after wrote a command: adb devices, and if I want to reboot mobile in this state then this process not completed (please see to image: Pic_3), and also I changed the mobile battery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help me to solve this problem.
Thank you.
Hello guys
can you help me please???
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Was looking for this for a very long while.Found them here to save the strain!!:victory:
Do you think these drivers will work on older xp computer?
uploading for xp ASAP!!
edit here
With this tool is very simple !
...........................http://forum.xda-developers.com/showthread.php?t=1983470
adb devices
Hey
I have installed about every driver package I could find of the Oppo find 5, but when I execute the "adb devices" command the device isn't being listed. The device is recognized in device manager and I am able to "see" my other devices (htc one s, nexus 7) in adb. Usb debugging is enabled altough it doesn't show warn me about it in the notification bar.
I got the same problem, my oppo find 5 is not recognized as a device in eclipse on my Mac. Though I can see it as an external storage, so I guess the drivers are installed.
USB Debugging is on of course.
Any idea what I could try so it's gonna be recognized in eclipse?
I am currently experiencing the same issue..i tried installing PDANet and it didnt work.. I will try and see if I can find a resolution.
Here I uploaded the drivers: https://dl.dropboxusercontent.com/u/21558454/Oppo_Find5_x909_drivers.zip
This is for Windows
Hi people.
I from Chile and sorry if I have bad english.
I bought an LG G2 D805
The problem is that the device came wrong flashed.
They wanted to put Lollipop and caused a brick.
When you turn on the device immediately get the recovery TWRP with the following
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I connect the device to the computer in recovery mode I can not use the MTP for the same reason as shown in the image.
In the recovery, selecting the install mode, appears in storage: internal storage (0)
I can enter the download mode (bootloader) so even I have hopes of saving the device.
I used various tutorials to fix the device and none has worked.
I used the method with LG Launcher .. and nothing
with flashtool, various methods (kdz and TOT) ... and nothing
I used ubuntu but recognizes it as computed Lg G802 and that caught my attention.
I think I can not fix the device while the recovery not moutn the data.
never before he had had problems following their tutorials but I have not found a solution for this problem and I need your help.
THANKS IN ADVANCE
I'm trying to TOT my VS980 like I have countless times for replacements and for some reason the usual method to get into download mode doesn't want to work. I power the phone off fully, hold the volume up button, then plug in my USB. It says download mode for a moment but then goes to a black screen and my PC opens about 10-15 different windows telling me "I need to format the disk in drive E: before you can use it."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried the usual things, uninstalling and reinstalling drivers and haven't had any luck in case its driver/PC related. The phone is currently running DR87s Euphoria 5.1.1 build and I have no issues with ADB working or getting into the devices file system when its booted.
Any suggestions? I've been looking around for quite some time but can't find much on my specific issue.
Right now you have bricked your phone, however all you have to do is download srk tools and unbrick your phone.
Sent from my LG-D800 using Tapatalk
So I'm stick in a bit of a rut here, I have tried using LGUP (including patched versions, Uppercut, COM41, different KDZ files) to reset my VS995 LG V20. No matter what, it stops at some point and says "Error: 0x2BC, Invalid command response code = 0x800002022". This has happened at 12%, 29%, and 30%.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have also tried using the LG flash tool (according to this guide), and it stopped at 4% at Step 14, even though it was supposed to go to 150%. It gives an error "0x2000, VS9951CA01.dz file does NOT support...", but I cannot read the rest of the line because the window cannot be resized.
What are my options here? I've scoured the forums everywhere and can't find any method that will work. If someone is willing to offer help, I can offer $5 or so via PayPal for your time and effort, as I have reached the end of what I know to try.
The solution was to use a different USB port... sometimes the solution is the most obvious one
It's not my phone but of a friend. Huawei P8 lite 2015. She is not technical, so she doesn't have any idea what could have happened. She just normally uses the phone and now it is doing this
Func no 10 (boot image)
Error no 1 (security verify failed!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
She said she was getting a similar error (with a green android) already before but she always managed to get over it by holding some button and then tapping on that link and the phone then booted. (yes I told her WTH didn't she care back then about the error) Now with this one she can't do anything.
How could this have happened and is there a fix which doesn't mean erasing everything?
If I get into a Fastboot mode, connect this to a PC, can I then access the data and photos in it at least via HiSuite for example?
unfortunately I don't have any special experience with Huawei phones and updating of firmware, so I would appreciate any hints
could simple update this way help here?
bump. Could HiSuite work in such state of the phone and maybe transfer data from it? Or do you think I can get to recovery mode in such state?
try to use the link
you just need a usb cable and a computer (windows i think)