Wifi not working after restoring from A10 beta 1 - OnePlus 5 Questions & Answers

Hi everyone!
The day before yesterday I installed the new OP5 Android 10 beta 1, but I could it was not working as I liked (it's normal, it's a beta and they to optimize everything OFC...)
The thing is when I nandroid restored and I started the old system, everything looked fine and working
But Today I noticed the Wifi switch is not working.. If I try to turn it on, they come back to off
I was thinking, but I'm not sure about this.. maybe the new beta reallocate vendor partitions and now is unable to find the wifi driver (I'm not sure, just a theory)
Did you have the same problem? Did you fix it? How can I do it?
I try to record a log.. it's attached

Related

CM --> MIUI --> CM Bluetooth Dies!

Hi folks,
I tried out the MIUI ROM and liked it, but for various reasons, I wanted to go back to CMod again. So, I restored my NAND backup of my CM6 install. When I did this, I noticed that Bluetooth was no longer working correctly, i.e. it would pair successfully with my radio, but it failed to connect to it.
When I restored my MIUI backup, bluetooth worked again.
I cleared every cache known to man and once more returned to my CM backup, but once again my Bluetooth failed to work.
In the end, the only thing that seemed to fix the problem was wipe all the settings (again) and flash the latest CM nightlies (very nice btw!). After this, all was well.
I am attaching a logcat file if anybody is interested in the Bluetooth output. My totally uniformed suspicion is that it had something to do with the way MIUI uses the Bluetooth stack to get the radio working, but I'm sure somebody out there knows better than I do.

[solved] Gyro sensor stopped working

I installed the official CM10 stable about a week ago and was really surprised how much faster the ROM is than the original ASUS firmware.
suddenly about 2 days ago my screen didn't rotate anymore when I turned the tablet. (Autorotate is switched on!)
I then installed a water level app to check the sensor values and found it to always return 0 deg.
I already tried rebooting and also tried recovering from a TWRP backup, I made right after installing CM10, but the sensors still refuse to give me any feedback.
Any help would be really appreciated.
edit:
Doing a full wipe before restoring my backup resolved the issue!

[Q] Wifi doesn't work on ICS aurora 5.0 update 20

Hello.
First of all thanks dzo for an amazing ROM Updating to latest version I faced a couple of problems, with wifi. First i had ran ICS 2.0 or so for a long time since that was working great i didn't see the need to update again, but now checking the thread and seeing there's loads of updates and hotfixes i decided to go for it and update to the latest, 5.0 u20 version. I decided to clean-up first, so i reverted back to 2.3.5 official and re-rooted and installed CWM 5.5.0.4, then ICS aurora 5.0 experimental, booted it up to see it was working ( I got to the startup screen, but couldn't press any buttons as the touchscreen was not working, not sure why but i continued updating hoping it would fix) and then rebooted back to CWM, installed 5.0 update 20.. Everything working fine now, except once i try to connect to my WIFI. I insert the password like I would normally, but instead of getting the "connecting... receiving IP" etc. it doesn't say anything. I can just see my WIFI as available but not able to connect to it.
I didn't want to give up so easily, so I re-did everything, now after 5.0 experimental i installed update 2 to see if some of the hotfixes caused the problem. Yes indeed, with update 2 my touchscreen was working just fine and so was WIFI.
So here I am wondering, what could be the cause for not being able to connect to my WIFI and how would I be able to fix it? Or maybe just settle for one of the earlier hotfixes, but I would prefer to sort this thing out.
Thanks.
Got same thing but with me its on every rom.
I think its because of the GB update I did. Maybe it had an WIFI problem the one that I had
Sent from my LG-P990 using xda premium
Maybe you should just do all wipes again and flash up20 again. If you really want to update, wait for a newer version and try again
Lol... Well i did restore my backup back to 2.3.5 original ROM, then update thru ALL of the updates but no luck.. Then once i was out in shops and found a public WIFI, decided to try to connect, and voilá, it connected... Now back at home i decided to look thru my router settings and switched the mode to 802.11b+g and instantly connected... So i dunno, but now it seems to work.
Gheed said:
Lol... Well i did restore my backup back to 2.3.5 original ROM, then update thru ALL of the updates but no luck.. Then once i was out in shops and found a public WIFI, decided to try to connect, and voilá, it connected... Now back at home i decided to look thru my router settings and switched the mode to 802.11b+g and instantly connected... So i dunno, but now it seems to work.
Click to expand...
Click to collapse
Had this issue since Dzo changed Aurora's kernel to 3.0.8. I don't know why but after Aurora 3.1 wi-fi can't connect to my network if it's not a b+g or just b. After I understood that the problem is in wi-fi mode on router everything went fine.
Update 21?
Good Day
Aurora update5.0 update20 wi-fi reboot . Where can i download update 21 to fix wi-fi reboot.
Thankyou
WehanSA said:
Good Day
Aurora update5.0 update20 wi-fi reboot . Where can i download update 21 to fix wi-fi reboot.
Thankyou
Click to expand...
Click to collapse
Somewhere in aurora thread in development section. You must only search.. You'll find it.
Strange, works for me.

[Q] Why does my Wifi & Bluetooth not working even with stock rom?

Hey guys,
I have a Galaxy S4 (i9500). I installed Omega ROM v22 on it and everything went smoothly, Wifi & BT working perfectly.
After a few hours of using the device (nothing special at all, texts and stuff like that) - I noticed my wifi isn't working and by not working I mean that I click the wi-fi button and it changes from gray to the mid-state between gray to green for around 20 seconds before it goes back to green ago.
If I open the menu to see my networks it just says "Enabling" without any networks there.
I had to drive somewhere so I went to my car and tried to enable Bluetooth, and same thing happens there - Bluetooth will not turn on and will stay stuck on mid-state between gray and green for a while and go back to green.
I flashed omega rom v22 again and the problem was gone, or so I thought. I went back to the car for another drive and realized the bluetooth issue is back - and when I got home I realized the wifi issue is back as well.
I figured I need to reset everything so I tried the following:
Full wipe (including dalvik and even including "internal SD card") and then flashing stock rom (from the official website, stock rom of my country).
The issue was back after a few hours. I do not have BT or Wifi access. Yesterday Wifi suddenly started working for a few hours but then it stopped working again.
I really need help! I have no idea what to do with this issue!
Well rule number one when you have problems after flashing without wipe.
1. perform a full wipe and see if the problem persists.
Lennyz1988 said:
Well rule number one when you have problems after flashing without wipe.
1. perform a full wipe and see if the problem persists.
Click to expand...
Click to collapse
Tried that, no luck.
What else would you try?
In some places when people had problems with Wi-Fi they said to flash a different kernel but I don't see why I would have this specific issue with Omega Rom and why the default kernel with it wont work well?
Maybe this could be a root issue? My root works fine but I have this weird gut feeling like this is some permissions thing that's going on.
I'm trying to think why it would work right after the wipe but then stop working shortly after.
Another symptom: It randomly started working for a few minutes and then stopped again (around three hours ago).
Any idea what's going on?
Well, if you fully wiped and didn't restore any apps and settings then it can be two other things.
Or it's a bug in the rom or a hardware failure in your phone.
I would suggest trying a different rom first. Do not restore anything, not even your google account.
wi-fi fix?
Do you actually have an i9505? or is it a canadian or att version? if its the latter sometimes the devs offer some wifi-fixes, also try a different kernel. otherwise it could be that your radio/modem are not compatible with the version of the ROM you are flashing.
Tried arrow ROM and this issue doesn't seem to happen in this rom. Hope it stays like that...
morhsn said:
Tried arrow ROM and this issue doesn't seem to happen in this rom. Hope it stays like that...
Click to expand...
Click to collapse
Sadly, it did happen with this rom, after just a few hours.
I'm now using stock rom and still suffering from the issue.
Does anyone have ANY idea what I can do to fix this?
Thanks in advance!

[Q] CM7.1 stable - wifi stops working properly?

Hi all,
I still use my old defy sometimes as a gps when I'm out and about. I'm running the official stable cm7.2 build. It has no sim card so I just connect to wifi at home to update apps etc. I find that after a couple of months wifi stops working properly. It's still connected but no traffic comes in or out. Happens on all wifi networks. I've found the only way to fix it is to wipe and reflash Cm. Then it's fine again for a few more months. Any ideas? It's a bit of a pain to have to set it up each time.
Are there any other roms that perform well, good battery life etc but are also very stable?
Thanks a lot
It looks like disabling wifi-n by editing the tiwlan.ini has solved the problem for now. But I'll wait and see if the issue happens again. The process is simple and described here: http://chromloop.com/2011/09/how-to...roblem-wifi-connected-but-no-internet-access/ The hardest part is probably making sure that you have read/write access to the files in question.
Note that I had to edit two files, tiwlan.ini and tiwlan_ap.ini (as someone mentioned in the comments of the above link) to get wifi working properly.
lobie81 said:
Hi all,
I still use my old defy sometimes as a gps when I'm out and about. I'm running the official stable cm7.2 build. It has no sim card so I just connect to wifi at home to update apps etc. I find that after a couple of months wifi stops working properly. It's still connected but no traffic comes in or out. Happens on all wifi networks. I've found the only way to fix it is to wipe and reflash Cm. Then it's fine again for a few more months. Any ideas? It's a bit of a pain to have to set it up each time.
Are there any other roms that perform well, good battery life etc but are also very stable?
Thanks a lot
Click to expand...
Click to collapse
lobie81 said:
I've found the only way to fix it is to wipe and reflash Cm. Then it's fine again for a few more months. Any ideas? It's a bit of a pain to have to set it up each time.
Click to expand...
Click to collapse
may i suggest you do a nandroid backup after you reflash your rom. then the next time it plays up again you just have to do a recovery instead of re-flashing and re-setup your gps again?
edit:especially now that you've edited your rom as in your second post.

Categories

Resources