Related
hey guys,
i tried the new rom by civato, for this i flashed the NE6 bootloader. the rom didn't work as expected (no data) so i tried to restore the stock rom NB7 via odin.
odin said succes, but the phone did not boot. i flashed cwm and flashed som roms from there, but i always got a freeze/bootloop, even after factory reset.
so i tried a full new flash with nand erase all. flash succeded, but i could not boot.
then i downloaded the N9005ZHUENE6 firmware from hongkong and tried to flash it, but odin always fails. now i get the "firmware upgrade encountered an issue." message and can't do anything with the phone anymore.
Can you please help me?
thank you in advance!
edit: problem solved, the NE4 pit file from sajjjjjjad did the job!
uluf said:
hey guys,
i tried the new rom by civato, for this i flashed the NE6 bootloader. the rom didn't work as expected (no data) so i tried to restore the stock rom NB7 via odin.
odin said succes, but the phone did not boot. i flashed cwm and flashed som roms from there, but i always got a freeze/bootloop, even after factory reset.
so i tried a full new flash with nand erase all. flash succeded, but i could not boot.
then i downloaded the N9005ZHUENE6 firmware from hongkong and tried to flash it, but odin always fails. now i get the "firmware upgrade encountered an issue." message and can't do anything with the phone anymore.
Can you please help me?
thank you in advance!
Click to expand...
Click to collapse
Head over to the HK thread(s) and see how to restore back to normal with Hong Kong variants it's a little different (you do have a HK version I assume? and not just risked an HK FW flash?)--- You can flash via ODIN again even with that error on the device.
radicalisto said:
Head over to the HK thread(s) and see how to restore back to normal with Hong Kong variants it's a little different (you do have a HK version I assume? and not just risked an HK FW flash?)--- You can flash via ODIN again even with that error on the device.
Click to expand...
Click to collapse
Is there a difference between the international N9005 and the HK variant? my N9005 is from germany. i flashed the german firmware again and the error is gone, but the device is still in the bootloop..
uluf said:
Is there a difference between the international N9005 and the HK variant? my N9005 is from germany. i flashed the german firmware again and the error is gone, but the device is still in the bootloop..
Click to expand...
Click to collapse
Very slightly yes. More to do with some HK Software issues, that's the only N9005 firmware which shouldn't/can't be flashed on every device model N9005 - regarding your bootlooping.
Grab a PIT file, sort out what firmware you use and match them, then flash via Odin, there are a few guides and it's pretty straightforward, however you need to read properly or you risk a hard-brick.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
radicalisto said:
Very slightly yes. More to do with some HK Software issues, that's the only N9005 firmware which shouldn't/can't be flashed on every device model N9005 - regarding your bootlooping.
Grab a PIT file, sort out what firmware you use and match them, then flash via Odin, there are a few guides and it's pretty straightforward, however you need to read properly or you risk a hard-brick.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I flashed the latest DBT firmware a couple of times, with a PIT file and without, with full nand erase and without. Odin always says passed but i get no boot sound and the device gets stuck at the boot animation.
I think the problem could be the NE6 bootloader i flashed, but if i flash the NE6 again after i flashed the NB7 firmware it doesn't boot either. Is it possible to downgrade the bootloader to another KitKat firmware?
uluf said:
I flashed the latest DBT firmware a couple of times, with a PIT file and without, with full nand erase and without. Odin always says passed but i get no boot sound and the device gets stuck at the boot animation.
I think the problem could be the NE6 bootloader i flashed, but if i flash the NE6 again after i flashed the NB7 firmware it doesn't boot either. Is it possible to downgrade the bootloader to another KitKat firmware?
Click to expand...
Click to collapse
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
alom5 said:
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
Click to expand...
Click to collapse
thanks for the tip, do you have a source for the NE5? i can't find a download for this.
You can use www.sammobile.com/firmwares.
Make sure you have the correct pit file as you changed it to the hk version before
Sent from my SM-N9005 using Tapatalk
on this site i can't find a NE5 version. i flashed the ND6, device didn't boot.
so i tried to flash cwm, worked fine. then i was able to install and boot the latest cm11, but the baseband, min, prl-version, meid, imei and iccid are shown as unknown. so i tried to restore the efs backup i made via terminal emulator, it looks like it worked but when i reboot nothing changed.
any other ideas?
alom5 said:
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
Click to expand...
Click to collapse
Sorry for bursting here >>> and Just to make sure
If I'm on the N9005XXUEND6 ( btw the best Firmware so far).....the new Hong Kong PDA: N9005ZHUENE6
is not 100% safe/compatible ?
My phone is the international version
:good:
hi
i have this problem too!(Downgrade baseband)
http://forum.xda-developers.com/showthread.php?p=53111058
when i downgrade to nd4 imei set to null null and ....
Hong Kong ROM is Only for 16gb N9005 !!!!!!!
you'r bootloader upgpraded to NE6 and You most downgrade to ne4
i export pit file from ne4:
https://mega.co.nz/#!T4YgnaYL!-FBDWMpBpTUWCmYDpGfBqaM26ZH9HK_u7SuRB3xoF0Q
try to flash 4 file rom ne4 with my pit file.
Hong Kong firmware is not for the international version. Hk phone is 16gb only and had different partition. So don't bother with it.
There is the NE5 firmware on sammobile site. I downloaded it from there. ..
Is pda NE4 csc NE5
Sent from my SM-N9005 using Tapatalk
sajjjjjjad said:
hi
i have this problem too!(Downgrade baseband)
http://forum.xda-developers.com/showthread.php?p=53111058
when i downgrade to nd4 imei set to null null and ....
Hong Kong ROM is Only for 16gb N9005 !!!!!!!
you'r bootloader upgpraded to NE6 and You most downgrade to ne4
i export pit file from ne4:
https://mega.co.nz/#!T4YgnaYL!-FBDWMpBpTUWCmYDpGfBqaM26ZH9HK_u7SuRB3xoF0Q
try to flash 4 file rom ne4 with my pit file.
Click to expand...
Click to collapse
thanks for the pit file, i'm downloading the NE4 right now, but as a one file version. do you know where i can get the 4 file rom? i only find the 1 file versions.
THANK YOU! with your pit file, it worked again!
http://forum.xda-developers.com/showthread.php?t=2774970
hey guys i think that i had the same problem with you . i updated my bootloader and my modem as civato said and now imei null and baseband unknown . can you help me how to fix this . thanx in advance
Ι fixed it too
Misterjunky said:
If your baseband is NB4/ND4/NE6 then you cannot downgrade however you can
upgrade if when any updates are available.
Good luck!
Click to expand...
Click to collapse
upgrade if when any updates are available.
I have buy in Austria a Note 4 910F with Open Firmware. I have flash many custom roms and i will back to stock but this not work. I have download the latest ATO Firmware but i get a ext4 error in Odin and too big size error. Thene i have download a open germany firmware but with the same probleme. Is there a open Europe firmware?
Schrotty35 said:
I have buy in Austria a Note 4 910F with Open Firmware. I have flash many custom roms and i will back to stock but this not work. I have download the latest ATO Firmware but i get a ext4 error in Odin and too big size error. Thene i have download a open germany firmware but with the same probleme. Is there a open Europe firmware?
Click to expand...
Click to collapse
I had the same problem with my note 3, I just reflashed it and it worked like a charm...try downloading the latest firmware from sammobile, there is one unbranded from France which was released in January 2015 and try flashing it again...also try doing a complete wipe before flashing anything
You also have the Nordic open.
Sent by a mobile gadget...
Make a firmware repair from Kies settings and will be able to get the latest version of your phone.
Kies repair not work on root phone. Only Odin.
Start kies repair without phone on. Just enter model and serial number
mariosraptor said:
Start kies repair without phone on. Just enter model and serial number
Click to expand...
Click to collapse
Not work. I enter SM-910F / 910F but nothing found.
this is nothing but a new headache introduced by samsung, even if you have the same soc you cant flash rom from different regions. One solution to this is to use the pit file along with the regional rom which we are about to flash. Unfortunately we dont have any dedicated thread for pit file collection.
Schrotty35 said:
Not work. I enter SM-910F / 910F but nothing found.
Click to expand...
Click to collapse
I think it should be SM-N910F
schrotty35 said:
not work. I enter sm-910f / 910f but nothing found.
Click to expand...
Click to collapse
you have to write like it is written on the imei sticker.
Capitals and exactly like it is.
Sm-910f
bala_gamer said:
this is nothing but a new headache introduced by samsung, even if you have the same soc you cant flash rom from different regions. One solution to this is to use the pit file along with the regional rom which we are about to flash. Unfortunately we dont have any dedicated thread for pit file collection.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2911989
The pit file in this thread worked for me so I could flash again after that annoying size error when flashing
Skickat från min iPhone med Tapatalk
The pit file have help you? How have you install this with Odin (which settings)?
Schrotty35 said:
The pit file have help you? How have you install this with Odin (which settings)?
Click to expand...
Click to collapse
The standard Odin options and then choose the pit and check re-partition and and erase nand I think it is called. Dont have Odin befor me now but it should be named something like that. But be aware that flashing with a pit can be dangerous! Your phone can be seriously bricked so be careful!
Schrotty35 said:
I have buy in Austria a Note 4 910F with Open Firmware. I have flash many custom roms and i will back to stock but this not work. I have download the latest ATO Firmware but i get a ext4 error in Odin and too big size error. Thene i have download a open germany firmware but with the same probleme. Is there a open Europe firmware?
Click to expand...
Click to collapse
I remember i got a similar issue with my SP GS5 with KK FWs, it was partition size not matching in my case, i didn't manage to find the the proper FW, but i found a workaround by removing the not matching partition file from the FW (it was the preload/HIDDEN image), repacked the FW and flashed it through Odin.
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
LS.xD said:
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
Click to expand...
Click to collapse
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
daganteng15 said:
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
Click to expand...
Click to collapse
Please tell me which firmware version is actually installed and which version you want to flash? Which region is your phone?
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
3xhon said:
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
Click to expand...
Click to collapse
Yah.. were the same.. there are two new update on grand prime XTC Philippines (open line) but cant flash in odin. And also can not update the device in OTA. Please help.
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Shinkumara said:
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Click to expand...
Click to collapse
To upgrade the device is not necesarry to download the firmware of the respective region, u can flash any version of firmware for another regions, the only need to know is the respective version of firmware is for your device only that, i have flashed many firmware in my prime without issues ever from other regions ( most actual than my original region ) and y device is working ike a charm
Have you rooted the phone?
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Hello guys I have solve this issue by flashing different firmware I used Nepal firmware. XTC firmware is corrupted.
You can use different region firmware if your phone is openline.
You can read my posts here
http://forum.xda-developers.com/gra...ully-rooted-galaxy-grand-prime-t2935607/page8
Shinkumara said:
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Click to expand...
Click to collapse
no i dont flash many versions in my device, just flash the latest update from other region and works fine, the region is not important
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Apocalypse Now said:
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Click to expand...
Click to collapse
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
vancer32 said:
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
Click to expand...
Click to collapse
Solved it. Thanks. I should have flashed a newer version of firmware; I flashed Kazakhstan and it went OK.
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
You have to flash exact soft for your region and phone. Grand Prime have many versions so you must select right one. In East Europe there is no secure bootloader or maybe I haven't encountered it yet. If you have secured bootloader so probably it's gonna be same like Sony or HTC. You'll have to unlock it. I can't say where
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
And did you solve that problem guys?
awha said:
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
Click to expand...
Click to collapse
The order did not do any difference. Why should it do?!
Before a chance the rom, I rooted my cellphone by this way
[ androidxda. com/root-samsung-galaxy-grand-prime-sm-g530h ]
It worked!
As someone said here, I should need to unlock the bootloader, I looked for I solution and I find this one
[ techtudo. com.br/dicas-e-tutoriais/noticia/2014/07/como-destravar-o-bootloader-de-um-dispositivo-android.html ]
this site is in portuguese-Br
it did not work
so, I installed samsung kies, and odin 3.04. And also didn't worked.
Now, I installed CMW recovery
[ mediafire .com/download/w0gzfrq7xtvztdr/Galaxy+Grand+Prime+CWM+Recovery.zip ]
still the same
finally, I downloaded odin 3.10.6, and instal a rom from india. As I find here [ droidviews .com/install-android-5-0-2-lollipop-firmware-on-galaxy-grand-prime-sm-g530h/ ]
Before I was trying Russia's rom.
After all, I noticed, and I read here, that depends on firmware which I was intalling
Hello,
I currently have an unlocked G930A that is running on 7.0, I am using the T-Mobile carrier and I would like to flash to the T-Mobile rom. I know it was possible on marshmallow but I couldn't find any posts regarding 7.0.
If I follow these instructions
Talal916 said:
Thanks bro! You know which version of Odin to use? I'm on 3.12.3 and it's giving me invalid sha md5 error. File is fine. Other guy mentioned Odin from Verizon thread. Couldn't find it
Edit: Found it! It's PrinceComsy Odin 3.12. It worked perfectly! However, now my fingerprint sensor doesn't work. Is that because I didn't flash bootloader? If I flash just bootloader, will it still wipe the system?
Edit 2: Goddamnit Samsung Pay isn't working either. Says I made unauthorized modifications.
Final Edit: So apparently you have to flash Bootloader as well to get Samsung Pay and fingerprint sensor to work.
Basically, Download PrinceComsy's 3.12 Odin from Verizon Root thread. Then flash the latest G930T ROM from SamMobile. Tick BL, AP, CP, AND CSC. Make sure you ran Odin with admin privileges. It'll wipe internal SD so back that up.
Click to expand...
Click to collapse
But using the 7.0 T-Mobile ROM from sam mobile. (I have made a backup of the device with smart switch.)
Should I be okay?
Also to mention: If its only possible to flash the U rom, please do let me know.
Im flash t-mobile rom 7.0 on sm-g930a without any problem and works great and i have better network strenght signal.Im on Ultra-mobile network witch is T-mobile.Wi-fi calling works.
ok i also have ATT sm-g930a and want to install the tmobile rom as i am on tmobile.
the phone is sim unlocked.
do i need to turn off find my samsung fiirst?
Hello,
I flashed my factory unlocked Samsung Galaxy S8 with the Verizon carrier firmware awhile back in order to gain some carrier features. Since then I have gotten a new device and want to flash my S8 back to the unlocked firmware. Flashing to the Verizon firmware was uneventful, but trying to flash it back to the factory unlocked XAA U1 firmware always results in a SHA256 Invalid error right after I click Start in Odin. I've tried the Prince Comsy version as suggested on a few threads, but it just gives a failed to write error. I have also tried another firmware version download (from Updato), different versions of Odin, and different PCs.
Any help would be greatly appreciated.
Thanks.
Master_W said:
Hello,
I flashed my factory unlocked Samsung Galaxy S8 with the Verizon carrier firmware awhile back in order to gain some carrier features. Since then I have gotten a new device and want to flash my S8 back to the unlocked firmware. Flashing to the Verizon firmware was uneventful, but trying to flash it back to the factory unlocked XAA U1 firmware always results in a SHA256 Invalid error right after I click Start in Odin. I've tried the Prince Comsy version as suggested on a few threads, but it just gives a failed to write error. I have also tried another firmware version download (from Updato), different versions of Odin, and different PCs.
Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
thread moved to Q&A
Anyone?
Still haven’t been able to find a fix for this. Tried with a patched version of Odin to bypass the SHA256 check, but it’s giving me a different error. I’ve attached photos of the exact error messages below. Surely someone here knows something about this?
download latest firmware
its maybe because you are flashing old file with v1 bootloader
sahilg009 said:
download latest firmware
its maybe because you are flashing old file with v1 bootloader
Click to expand...
Click to collapse
Already using the latest from Updato. Thanks though.
Still haven’t found a fix for this. Any suggestions would really be appreciated. Not sure what else to try here.
sahilg009 said:
download latest firmware
its maybe because you are flashing old file with v1 bootloader
Click to expand...
Click to collapse
Well, you were pretty close. For anyone who is interested, the issue I’ve discovered is that the current Verizon firmware has bootloader v4 on it, and the latest U1 firmware only goes up to bootloader v3. Looks like I’ll just have to wait it out.
Master_W said:
Hello,
I flashed my factory unlocked Samsung Galaxy S8 with the Verizon carrier firmware awhile back in order to gain some carrier features. Since then I have gotten a new device and want to flash my S8 back to the unlocked firmware. Flashing to the Verizon firmware was uneventful, but trying to flash it back to the factory unlocked XAA U1 firmware always results in a SHA256 Invalid error right after I click Start in Odin. I've tried the Prince Comsy version as suggested on a few threads, but it just gives a failed to write error. I have also tried another firmware version download (from Updato), different versions of Odin, and different PCs.
Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
Did you fix your problem, if yes - how ?
novosti said:
Did you fix your problem, if yes - how ?
Click to expand...
Click to collapse
Yes, I was getting that error because the unlocked firmware I was trying to flash had an older boot loader than the Verizon firmware that was on the phone. Had to wait until an updated version of the unlocked firmware was uploaded.
Master_W said:
Yes, I was getting that error because the unlocked firmware I was trying to flash had an older boot loader than the Verizon firmware that was on the phone. Had to wait until an updated version of the unlocked firmware was uploaded.
Click to expand...
Click to collapse
How to check what version of boot loader is on the phone.
and what version is on firmware ?
thank you
novosti said:
How to check what version of boot loader is on the phone.
and what version is on firmware ?
thank you
Click to expand...
Click to collapse
I don’t quite remember, I sold that phone soon afterwards. It has something to do with the name of the firmware, I’m sure Google could help you there.