Related
Hello,
my borther brougt me this tablet from china for chrismas: Lenovo Lepad y1011 (sry can't send a link becaus i'm a new user...)
But Lenovo has changed everything on android and they call it OS 2.0 (= Android 2.2 )
Maybe someone found a solution to update the OS to honeycomb or to install CWM?
I have read so mutch chinese forms but the googletranslator didn't find something usefull for me.
I hope someone of you may help me.
thx MiracelVip
_____________________________________________________
Here is a mirror for the roms:
3G001_0100.3010_user_mode(1).rar h**p://ul.to/mmv76osx
WiFi001_0100.3010_user_mode.rar h**p://ul.to/26utcnuo
hi, the thinkpad tablet never came with anything lower than 3.1, also that isn't a valid model number for this tablet.
I think you must have something other than a thinkpad tablet
Cheers
Tom
Check here, shows the instructions for that model.
TS
Yes i know this thread! But its just about rooting and installing google maps and the market... but the market in this thread isn't working anymore! i think the version is to old...
but i hate the lenove OS, i would like it to install another one or maybe develop my own one if CWM would work
it's this one: h**p://appserver.lenovo.com.cn/shop/shop_Detail.aspx?gdsid=A2100014142
Unfortunately, it's said that Lenovo has no any upgrade plan for this pad. LePad S1(Y1011) is the first mode of pad from Lenovo. the product, particularly its deep customized OS, is in very low maturity. short after its released to the market, it's ended production and replaced by A1 series pad. that's the situation, so disappointed, and angry. and finally, its ROM leaked.
i searched some Chinese forum and got the following leaked ROM:
* LePad S1 Ver_Wifi ROM here
* LePad S1 Ver_3G ROM here
* resource pack here
hope it helpful to you guys who may interested look into the code
Thanks for this informations! Does someone know what we can do with this files?
________________________________________________________________________
This files are working! While I tried to install Gapps i bricked my Y1011 and i was able to reflash everything by using fastboot and LePad S1 Ver_3G ROM.
thx again for the files
hi i have the same tablet and really heavy problems. i look at all chinese forums with google translation and it is horrible to find anything about a working custom firmware.
if you instal the upper firmware it will be nice to tell us something about the changes. when i want to download i didnt work download allways stopp. the name is the same like the orriginal number.
im loking for a stable full android version. im read that there is a chinese caled chita he costum firmware for the lephone and the lephone works normal withe leos like the lepad.
so if anybody knew news about the lepad y1011 it wil be nice to write it here.
mfg
thorwald
yes i was able to install the firmeware above but ther are no changes! its just a leaked original version
at the moment i'm uploading the firmewares to uploaded.to
watch the 1. post
Thanks for your post. So i wont install the leaked rom if it isnt a full android. Do you know anything about Chitas Roms.
I worked with Costum Rom for my Archos Tablet and for HTC sensation xl but i m not god enough to custom a own one.
But i got Market place working without Gaaps. I have some mistakes with 492 but only by a few apps.
Thanks for upp the Files if I break it its easy to unbrick it. I will download it.
If some from China will inform us it will be very nice.
you have been able to install the market?! could you give me tutorial how you have done this? and thefiles you installed?
everytime i've tried it i bricked my device
(gerne auch auf deutsch )
At First German is on this forum not allowed. Forum rules (mir wärs auch lieber)
I have got market work with some mistakes on some files got mistake 492 if you find the APK on other Place the most will work but not with autoupdate.
Some Games will not work bcause the OS2.0.0 The Hardware is god enough
So here are how to do it
Install LeTools on Windows 7 PC. it is assumed that LenovoStore on your Lepad is already connected usin wifi.
Connect USB cable with Windows 7 PC
unzip attached file to your PC.
1. Copy all attached files to your LePad using LeTools in any known directory.
2. Use LePad filemanager and click on z4root.apk and install it. Its icon will appear on last Desktop
3. Use LePad file manager and click on Root_Explorer.apk and install it. Its icon will appear on last Desktop
4. Click on Z4root icon to run it. select temporary root permission
5. Click on Root_Explorer icon. It may say that it needs a restart to gain root access. so re run.
6. Now little hardwork. Find the folder where you copied the files. You have to copy following files to the folder /system/app
a. Vending.apk
b. Network location.apk
c. Market updater.apk
d. talk.apk
e. googleServicesFramework.apk
f. googlePartnerSetup.apk
7. Touch the file name and hold for a second, menu will appear. Select copy and go on top of listed files where .. is there for going to previous directory. keep going back till you reach the root folder.
8. Go to folder /system/app and touch the copy button at bottom of LePad screen.
9. Repeat the process for all above files.
10. Change the permissions on each copied file by touching the file name and holding for a second, from menu selecting permissions.
Select permissions as follows
User - Read and write
Group - Read
Others - Read
11. Now shutdown the LePad and then Power On.
12. Use file Manager and go to folder where you initially copied the files. Touch the Vending.apk to install it.
13. Now you should have Google market icon on Last Desktop.
14. All the best. You are needed to have a gmail account to use Google market.
I will look were i can Upload the files. If you start and stop the market it will automatik update to the 4.3.3
h**p://dl.dropbox.com/u/56215670/rootet.rar
Hope i could you Help
MFG
Thorwald
Any chance that there will be an Custom Rom For the S1 with android v2.3 or v4?
New LEOS vers. in China
Ther is a new leos version upcomming in china vers Nr WiFi001_C_S_1.0100.3014.rar
Hopefully i will update it in a Few days after Test
MFG
Thorwald
[GUIDE/TUTORIAL/HOWTO] HTC One M7 Stock to Android 11 / LineageOS 18.1
[GUIDE/TUTORIAL/HOWTO] HTC One M7 any version (m7, m7ul, m7spr, m7vzw) stock to Android 11 R / LineageOS 18.1
This detailed step-by-step guide helps you transform your HTC One M7 (any version) to a powerful one with Android 11.
Make sure you have the One M7 model, in Android, go to Settings > About phone and check the model.
CHANGELOG
v8. Upgrade to Android 11, improve readability, update pack
v7. Updated pack with MagiskManager 8.0.7 and Magisk 21.4
v6. Infos in case of Simlock
v5. Moved to Android 10 thanks to @tarkzim, updated pack with Magisk 20.4
v4. Moving to Android 9. I was wrong in v3 ;- Thx @tarkzim), good for all M7 versions
v3. Reverted back to Android 7.1. No stable ROM for Android 8 or 9 (and will never be)
v2. Tutorial updated for Android 8.1 Oreo, updated pack with TWRP 3.3.1-0
v1. Initial release
1) DOWNLOAD
- djibe HTC One M7 pack (44.3 Mo) v2 : http://bit.ly/djibe-onem7-v1
(includes HTC drivers, recovery TWRP 3.6.1_9-0 for all m7 by Xeno1, Magisk Root 23 adb & fastboot.exe).
Unzip the djibe folder from the zip on root folder of C: drive.
- ROM Unofficial Lineage OS 18.1 for M7: https://forum.xda-developers.com/t/rom-11-0-unofficial-m7-all-lineageos-18-1-stable.4454219/
Download latest build for M7 here: https://androidfilehost.com/?w=files&flid=334598&sort_by=date&sort_dir=DESC
+ BitGApps ARM 11 v1.4+: https://github.com/BiTGApps/BiTGApps-Release/releases/
+ Charge phone to 100 %
WARNING. This tutorial uses Microsoft Windows.
WARNING. Warranty is now void.
WARNING. Read carefully the sentences starting with ###.
2) BACKUP DATA AND INSTALL DRIVERS
Disable Antivirus.
Install drivers from my pack:
right click on HTCDriver.exe -> click on Run as administrator and continue the setup.
Then install HTC_BMP_USB_Driver_x64.msi (or *_x86 if you have a 32bits Windows edition).
### Install doesn't work ? Try these drivers for Win10 : https://htcusbdriver.com/download/htc-usb-driver-v4-02-0-001
Now go to my folder flash, and right click the adb 15seconds installer > Run as administrator.
During install, every time the command asks you a confirmation, enter Y and confirm with Enter.
Connect HTC One (while phone on) to PC, let drivers install.
In Windows explorer, HTC One should be available.
### If not make sure phone connection is in File transfer mode (see Android notifications).
Collect all personal photos, videos, etc ... and copy these on PC.
Use an app like Backupyourmobile to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
Disconnect phone.
### If your phone is Simlocked/carrier locked/Network locked, don't go further.
Visit official website of your network carrier (or call their support) to retrieve your desimlock code.
Ask them for details on how to remove simlock.
How do I know my phone is simlocked ? When you insert a SIM card from another operator, network is not accessible.
Only a stock ROM can remove simlock.
To go back from custom ROM to stock in 1 zipfile flash, follow this tutorial: https://tcg96.github.io/m7gurureset
3) UNLOCK BOOTLOADER
In Android, go to Settings > About > Software information > More.
Tap 7 times on Build number. It unlocks Developer options.
Go back to the About menu, you can see the new Developer options menu.
Tap on it, accept the warning.
Toggle on the USB debugging option.
Connect phone, a message appears on phone : Allow USB debugging?
check Always allow and confirm by tapping on OK.
Now, open a Windows command on my "flash" folder (hold Shift + right click on folder -> Open a windows command here).
### Then navigate to my flash folder (if it is on desktop) with this command :
Code:
cd /d C:\djibe\flash
Enter command :
Code:
adb devices
, confirm by pressing Enter.
Command returns :
Code:
List of devices attached
HT35****** device
### If no device is found, uninstall and reinstall properly the drivers while antivirus is off.
### Or start fresh on another PC.
Now type :
Code:
adb reboot bootloader
Authorize ADB commands on phone.
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Type :
Code:
fastboot devices
Command returns :
Code:
HT35**** fastboot
Type :
Code:
fastboot oem get_identifier_token
, confirm by pressing Enter.
Command returns multiple lines.
Select with your mouse all the lines from
Code:
<<<< Identifier Token Start >>>>
(included)
to the line
Code:
<<<<< Identifier token end >>>>>
(included).
Now on keyboard copy (Ctrl + C combo), then open Notepad.
In Notepad, paste those lines (Ctrl + V combo).
Now manually remove all the (bootloader) strings from each line.
Your notepad should now look like this :
<<<< Identifier Token Start >>>>
37A5DBF4FE5F0D9F4425E54AA91AFDBF
2A20E9C67C3BB4FAE60263F76BDEC6AC
847BF9FFB11DAEA4AB88AC8710435449
9BC12E93DF4C54FFE3D064C4C810C49A
2CDAF2E0CD3A164FED4A568CB0FD2AC6
C01AA991733D949C00987062D691DE91
8AA1C97CEBC3ACE83FECE75A1D03CE72
62414C7DC36A73AFCBF433E1EBE2EDC7
E272F73309632D3EF8C86E472B65E8EF
37E46B52FE3F94FC69D1854CA3DE6F48
C3E10001B233A70B1EAF35134F51FCC6
353E0CC98534E6E60A241A7063D0BE2F
A5B752E75C1C47E6F739BDBE67D024DA
3292A14278247557632639802722A86C
E61424F7666AE085AA9905096FEED1AD
5ECBBD867544E95ABDDA277690B8CB55
<<<<< Identifier Token End >>>>>
Now visit this website : https://www.htcdev.com/bootloader/
Register on the site. Confirm registration with your email.
In the select menu, chose HTC One (M7), click Begin unlock Bootloader button.
Agree to legal terms.
Next page, go to the bottom and click continue to step 5.
In the bottom of this page, in the lower textarea "My Device Identifier Token",
copy and paste the multiple lines you just edited (my example is just above).
Click Submit.
HTC tells you : Token Submitted Successfully.
Open your mailbox (associated to your HTC account).
Copy the Unlock_code.bin file attached to email in my "flash" folder you unzipped.
In Windows command, type :
Code:
fastboot flash unlocktoken Unlock_code.bin
, confirm with Enter.
Command should return :
Code:
unlock token check successfully
Back to phone, press Volume+ to select "Yes, unlock bootloader", then Power button to confirm flash.
Now wait while phone is going to Factory reset.
Don't let Android restart by holding both Power + Volume- to enter bootloader immediately.
FASTBOOT menu is overlined in red.
4) FLASH TWRP RECOVERY
Using the same Windows command prompt, enter :
Code:
fastboot devices
to make sure phone is still available.
Then
Code:
fastboot flash recovery twrp-3.6.1_9-0-m7univ.img
Command returns :
Code:
finished. total time: x.xxxxs
##€ If it fails, tries with a Windows Powershell shell.
Now on phone, press Volume- to select Bootloader, confirm with Power button.
You are back to the booloader screen (UNLOCKED is written on top line), press Volume- to navigate to RECOVERY, and confirm with Power button.
Phone reboots in TWRP recovery.
5) WIPE PARTITIONS
In TWRP, check Never show this screen and Swipe to Allow Modifications.
You land on TWRP Home screen.
Go to Wipe > Advanced wipe.
Select Dalvik, Cache, System, Data, Internal Storage then Swipe to Wipe, go back to Wipe menu.
6) FLASH ROM, GAPPS AND ROOT (OPTIONNAL)
We first have to get our zips on the phone.
Still on TWRP Home screen, tap on Mount > deselect all partitions except Data, then connect phone to PC.
In Windows Explorer, you can see MTP Device, copy the zips of ROM, GApps, Magisk + Magisk Manager right in the Internal Storage folder.
Tap on Disable MTP once copy is finished.
Then back to Home screen, tap on Install > choose lineage*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active)
then Add more Zips -> Magisk*.zip,
then Add more Zips -> bitgapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end (can be long).
When completed successfully, tap on Reboot.
Tap on Do not install when TWRP asks for the app install.
Wait during long first boot.
Setup Android.
7) You can use Backupyourmobile to restore data,
use GPS Status & Toolbox app to enhance GPS fix.
That's it.
Enjoy,
djibe
THANKS --------------
Teams of : TWRP, LineageOS team, tarkzim, zsoerenm, alray, ., Flyhalf205, icxj1, R1ghtC, gimmeitorilltell, All M7/MSM8960 contributors.
Just my 2 cents
Just my 2 cents if it can help
djibe89 said:
- a microSD card (FAT32 format). Copy the zips of ROM, GApps, addonsu and deviceid*.apk (both in my pack) on the root folder of microSD, then insert it in phone.
Click to expand...
Click to collapse
The M7 is not equipped with a mircoSD card slot, only a virtual /sdcard (symlink to /data/media/0) ... So they'll either have to adb sideload or adb push the files to internal memory which is pointless at this stage since it will be wiped during bootloader unlock. Or drag n drop the files using mtp from twrp once it's installed on the phone.
3 ) UNLOCK BOOTLOADER
[...]
Now wait while phone is going to Factory reset.
Setup Android again on next boot.
4 ) FLASH RECOVERY
Now re-enable USB debugging in Android.
Using the same Windows command prompt, type
Code:
adb reboot bootloader
again.
Click to expand...
Click to collapse
You could save a lot of time just force rebooting to bootloader (power + vol down) right after BL unlock/factory reset are completed so you don't have to setup the system you're going to wipe 2 steps later. USB debug anyway isn't required to fastboot flash recovery so it's not like booting back in system is mandatory before flashing recovery.
:good:
@alray : Thank you so much for help.
I'm lazy with baby waking up every night and did some awful copy-paste.
I correct all these right now.
Thanks.
I would highly recommend to use the official downloads of twrp, HTC drivers, roms and so on, you uploaded these files to your google drive and there is stuff in it nobody will ever need. And nobody knows if those files are in original condition. Strange thats the third time this year someone tries to get users to use their stuff (for a five years old device) there are already a lot of guides out there and several thousand people did it several thousand times without problems. Also you wrote that this would be official lineage but its unofficial, and for that there is already a thread here. The other two threads got deleted by mods because they tried to get users to use files from unknown suspects sources. Use android file host and maybe tell in los thread where those files are stored, whats the source and who made it.
saturday_night said:
I would highly recommend to use the official downloads of twrp, HTC drivers, roms and so on, you uploaded these files to your google drive and there is stuff in it nobody will ever need. And nobody knows if those files are in original condition. Strange thats the third time this year someone tries to get users to use their stuff (for a five years old device) there are already a lot of guides out there and several thousand people did it several thousand times without problems. Also you wrote that this would be official lineage but its unofficial, and for that there is already a thread here. The other two threads got deleted by mods because they tried to get users to use files from unknown suspects sources. Use android file host and maybe tell in los thread where those files are stored, whats the source and who made it.
Click to expand...
Click to collapse
Because you are a senior member you know where to download everything.
But everyone is not like you.
So I tried to compile a ready-to-go pack for the newcomers, like I did for many devices by know.
This allows noobs to profit from custom ROMs and don't keep it esoteric.
Like you say, many downloads are just hacks, so I tried to bundle lowest size safe files.
saturday_night said:
I would highly recommend to use the official downloads of twrp, HTC drivers, roms and so on, you uploaded these files to your google drive and there is stuff in it nobody will ever need. And nobody knows if those files are in original condition. Strange thats the third time this year someone tries to get users to use their stuff (for a five years old device) there are already a lot of guides out there and several thousand people did it several thousand times without problems. Also you wrote that this would be official lineage but its unofficial, and for that there is already a thread here. The other two threads got deleted by mods because they tried to get users to use files from unknown suspects sources. Use android file host and maybe tell in los thread where those files are stored, whats the source and who made it.
Click to expand...
Click to collapse
For the official LOS ROM, tell LOS to store official builds. As they don't do it anymore, we must rely on personnal builds.
A lot of guides out there ? Made extensive search for cracking this phone, never found a step by step one.
Five year old device ? Still so good once unleashed. Custom ROMs are for these devices isn't it ?
@djibe89 Might be useful to point out in your opening post that the 20180420 build has DT2W enabled, but I'd like feedback from people with a functional battery if it makes their device reboot or not, similar to issues reported in the original kernel thread. I suspect my battery is on its way out. The 20180416 build is completely stock upstream LineageOS, no DT2W.
Thanks for the credit .
.:B:. said:
@djibe89 Might be useful to point out in your opening post that the 20180420 build has DT2W enabled, but I'd like feedback from people with a functional battery if it makes their device reboot or not, similar to issues reported in the original kernel thread. I suspect my battery is on its way out. The 20180416 build is completely stock upstream LineageOS, no DT2W.
Thanks for the credit .
Click to expand...
Click to collapse
Thanks for your explanations.
Any trouble following this tutorial guys ? How to enhence it ?
802D device supported?
M.Z.F said:
802D device supported?
Click to expand...
Click to collapse
Hi, no idea, does your model has another model name/code ?
djibe89 said:
Hi, no idea, does your model has another model name/code ?
Click to expand...
Click to collapse
Model name & code like?
PRI Version= 4.22_001
PRL Version = 10012
Getting this message: Updater process ended with ERROR: 7 Error installing zip file '/sdcard/lineage-14.1-20180520-UNOFFICIAL-m7.zip'
any help would be appreciated, thank you
I have tried all the custom roms mentioned above i.e. lineage os , Xenonhd and slim7. But non of them installed. It always shows error either this is not for your device , this device is cdwg or unable to mount. Please give me a link for custom rom for my device that is htc one 802d cdwg
Rafay106 said:
I have tried all the custom roms mentioned above i.e. lineage os , Xenonhd and slim7. But non of them installed. It always shows error either this is not for your device , this device is cdwg or unable to mount. Please give me a link for custom rom for my device that is htc one 802d cdwg
Click to expand...
Click to collapse
All the custom roms mentioned above are NOT for your phone variant.There were almost no development for the 802 branch at the peak of it's popularity and I didn't see anything new for this variant in the past 2 years or so. I wouldn't expect a 7.1 roms for this variant...
Maybe you'll have better luck searching on Asian forums
skovatov said:
Getting this message: Updater process ended with ERROR: 7 Error installing zip file '/sdcard/lineage-14.1-20180520-UNOFFICIAL-m7.zip'
any help would be appreciated, thank you
Click to expand...
Click to collapse
Here you have answer:
https://forum.xda-developers.com/showthread.php?t=2522762
---------- Post added at 05:30 PM ---------- Previous post was at 05:20 PM ----------
Hi.
After installing Android 7.1 Google Pay stop working on my phone. I have torn on NFC communication but terminal don't read my card from app. I don't turn on access to root. Any aidia how to solve this issue?
I have an M7 that I would like to update Android on however the above is a bit over my head. I have seen other sites and video showing this to only take a few minutes and not requiring a PC. Am I missing something? I just don't quite understand the process of it all.
Bazooka said:
I have an M7 that I would like to update Android on however the above is a bit over my head. I have seen other sites and video showing this to only take a few minutes and not requiring a PC. Am I missing something? I just don't quite understand the process of it all.
Click to expand...
Click to collapse
Flashing without a PC can be done but not recommended. If something goes wrong (and thrust me, it happens pretty often) you'll be stuck with a bootlooping phone.
The guide at post #1 is all you need, what part exactly do you have problem understanding?
alray said:
Flashing without a PC can be done but not recommended. If something goes wrong (and thrust me, it happens pretty often) you'll be stuck with a bootlooping phone.
The guide at post #1 is all you need, what part exactly do you have problem understanding?
Click to expand...
Click to collapse
Thanks for that. I tried to go through it nice and slow making sure I understood each step. I got to where I needed to open a command window on the "flash" folder to which I must have powershell(?) installed as it gave me that option. After inputting 'adb devices' it listed a device but stated it was offline. This is where I am stuck as the steps after this do not work.
drivers win10
Hi, I have a basic ask. Do you know where to get Win 10 drivers? I can't run the installer HTCDriver_4.2.0.001 on my Windows 10 (version 1803).
It gives me the error: The driver installer is not supported for your operating system. Thanks for your help.
Hello people of XDA,
as I promised here, here's a tutorial for getting Android Oreo 8.1 up and running to your device.
NOTE: I DID NOT MAKE THIS TUTORIAL! This is a translated guide from 4PDA by nik-kst. I've also rehosted some of the files on Google Drive so you won't have to register on 4PDA(hopefully).
Code:
[B]Your warranty is now void. [/B]
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Now that the disclaimer is dealt with, let's get on with this tutorial shall we?
First things first, we need to grab a bunch of things:
SP Flash Tool;
MediaTek VCOM Drivers;
The Stock Kernel(it will make sense to you soon!);
Scatter file for repartitioning, drop it inside the stock kernel folder(credit to fca.sjc);
ADB and Fastboot of your choice;
New recovery;
Oreo's Backup, drop it inside a MicroSD card or drop it once you have re-partitioned the device successfully;
Once you have everything setup and extracted, you're ready to go!
First, we gotta go ahead and install VCOM drivers - we won't be able to do anything to our phone without them.
If you're running Windows 8/10, make sure to disable Driver Signature Verification.
Go to Device Manager, click Action at the top and click Add legacy hardware. A new wizard window will appear.
Choose Install the hardware that I manually select from a list(Advanced);
In the next window, choose Show all devices and click Next, then click Have disk...
Then you will be prompted to direct to the driver install info, so click Browse...
Now go to the folder of drivers and select the Setup Information file that's fitting for your computer, x86 for 32-bit and x64 for 64-bit.
You should now find 5 new devices in the list, add them one by one by repeating steps 2 to 6 until you have all of them installed.
Windows might complain about unsigned drivers, just allow their installation and proceed.
If your ports list looks similar to the picture below, then you're set for the next step!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next, we'll want to back up the NVRAM partition, because AFAIK, it keeps important unique data about your device such as WiFi, IMEI etc. data.
Note: You may want to take out your MicroSD card and SIM cards prior to this just in case. Also, might be the possible fix if readback for NVRAM fails(needs confirmation).
First, open up Flashtool.exe as admin and go to Readback tab;
Click on Add, a new item in the list will appear. You want to double-click on it, so that a Save File window would appear.
Save that file anywhere you want, name it whatever you like, for convenience I've named mine ROM_NVRAM.
Now, you'll want to find the address in the memory for NVRAM partition. To do this, open up the stock firmware(credit to fca.sjc) scatter file in a text editor(like Notepad++), and find line partition_name: nvram
In that paragraph, find two values: linear_start_addr and partition_size they should be 0x380000 and 0x500000 respectively.
Punch in those values into the Readback block start address window, so it should look something like this:
Now, click Read Back, it should gray out along with Add and Remove.
Now, turn off your device, pull out the battery for about 30 seconds, reinsert it and DO NOT TURN IT ON YET! With the Volume Down "-" button pressed, plug in your device into the USB port.
The NVRAM partition should've been read and you'll get a giant green tick sign when it's done.
Now that that's done, we can start repartitioning our device.
Make sure your SP FlashTool is running as admin, otherwise restart it as admin.
Open up the Download tab and in the line Scatter-loading File click Choose and navigate to the 8.1 scatter file, it should be named MT6580_Android_scatter_8.1.txt.
From the dropdown list, select Format All + Download.
Again, take out the battery for 30 seconds and put it back in WITHOUT turning it back on.
Now click Download, and with the Volume down "-" button held down, plug the device into your PC. There should be a bunch of colored progress bars at the bottom of the window.
Once it's done, you should get the giant tick pop-up, after which you can disconnect the device, and start it normally.
NOTE: it takes a while for the first launch, so give it some time!
Once it starts up into the first launch wizard, we can now restore the NVRAM.
In order to activate the memory writing function of SP FlashTool, re-start it with admin and press Ctrl + Alt + V, the window header should have (Advanced mode) now.
From the Window drop-down, select Write Memory, it should redirect you to a new tab named accordingly.
In the File Path field, browse to the ROM_NVRAM backup that you made earlier.
In the Begin Address (HEX) field, copy the linear_start_addr value off the scatter file.
The region should be left at EMMC_USER.
Now, click the Write memory button, turn off the device, re-insert the battery just like before, and connect the device with the Volume Down "-" button pressed.
It should begin the writing of the NVRAM and once it's done a giant tick pop-up will appear.
Now after that is done, boot into the OS, check that everything works, including IMEI and WiFi.
Also, during the setup wizard or later in the settings setup a screen lock with a pattern or a PIN or a password(credit to fca.sjc), because the partitions may remain encrypted and show 0mb(needs confirmation)
Now you'll want to unlock the bootloader and flash the TWRP recovery.
Now this is a standard recovery flash, but for a quick summary:
Enable Developer options;
Enable OEM unlocking;
Reboot into bootloader mode(I like to use ADB for adb reboot-bootloader);
Make sure your device is detected via fastboot devices, if not, google some drivers for ADB;
Unlock the bootloader via fastboot oem unlock, and press the Volume up button to confirm the bootloader unlocking.
Now, reboot the phone, it will take a while to reboot, DO NOT PANIC AND WAIT.
Now that we have bootloader unlocked, we can flash the TWRP:
Go into bootloader mode;
Confirm you are being detected again by fastboot devices;
Flash the recovery with fastboot flash recovery [twrp recovery name].img;
now, WITHOUT booting into system we boot into recovery and confirm it works.
Now that you've done all this, you propably want to run Oreo now, eh? Well, here's what we do now:
Note: make sure you have the Oreo's backup zip extracted at it's own folder inside your MicroSD card or inside the phone's internal storage by now(thanks @ZappaDong for letting me know)
From recovery, select Wipe > Advanced Wipe and select system and vendor, and wipe them. Logs may complain about not seeing vendor, ignore that message.
Then, we restore everything from the Oreo backup;
Finally, do a factory reset(aka wipe Data, Dalvik and cache);
And reboot!
Now, fingers crossed, you should be booting into a fully functional 8.1 Oreo! if you did, congratulations!
Please let me know if I've made any mistakes and/or this has worked for you.
All credits go to the awesome people at 4PDA, especially nik-kst(if you're reading this, you the real MVP!), below I've linked the sources I've written this guide from.
Nik-kst's guide to repartitioning the device for Oreo;
Nik-kst's post about the Stable Oreo ROM.
Reserved for possible FAQ in the future
@aurismat, Hey man it worked as expected ! However, I was a bit confused on the repartitioning part when selecting ''Format all+download'' option then clicking ''start'' will only give an error stating that the IMG file of ''vendor'' is missing. (I am using SP FLASH v5.1744)
But nevertheless, I tried the ''Download only'' option and lucky it worked as well. I just wanted to clarify should it be Format all +download or Download only? Or is there a missing corresponding IMG file for vendor ?
Hey @JustAnormalGuy,
It should've been Format All + Download.
Also I'm glad that my post has helped at least one person.
Thanks for pointing out this omitted detail though, I'll edit the post ASAP.
Thanks for the translation!
--- solved ---
I have tried it three times but never managed to back up the NVRAM partition.
Error: s_dl-get_fram_setting_fail (5054) see attached screenshot
-----------
I have used Win 10 on my Mac and it worked.
Now I am stuck at step "5. Unlock the bootloader via fastboot oem unlock, and press the Volume up button to confirm the bootloader unlocking."
this looks O.K. to me
----------------------------------
>fastboot oem unlock
...
(bootloader) Start unlock flow
OKAY [ 16.047s]
finished. total time: 16.047s
-----------------------------------
But now nothing happens after
-----------------------------------
> fastboot reboot
rebooting...
finished. total time: 0.000s
-----------------------------------
It's stuck in
[Fastboot Mode] <<==
=> FASTBOOT Moe ...
and nothing happens.
UPDATE
O.K. I have used the Power Button to switch it off and on again, there was a small Android for a few seconds and the phone rebooted the second time. Now I am waiting for it to finish booting.
UPDATE 2
TWRP is working now
And what TWRP.img should I use for
"3. Flash the recovery with fastboot flash recovery [twrp recovery name].img;"
in the next paragraph? Is this the "New recovery;" from the download section at the top?
Thank you!
Missing tips:
- Put both scatter files inside the stock kernel folder before starting.
-I used the stock scatter file for the NVRAM backup then the 8.1 scatter only for the Formal all+Download step.
- When you first run the stock ROM, set up a pin or a password, otherwise you will have failed to mount data in twrp and data will show as 0mb due to its encryption.
@aurismat does that WW file includes the new vendor release?
In the vendor, a bug was detected, the camera with the auto flash turned on, did not turn on (rather, it turned on and off immediately), the flash when shooting video.
Now everything works as it should: yes2:
Fixed vendor: 07/07/2018
https://yadi.sk/d/DUGRYLnc3YtADV
I did everything according with this tutorial. Sadly my mobile network is not connecting idk why. I get an error saying Simprocessor and it doesnt connect on mobile network. It detects the networks but wont connect. Im going back to stock until someone can help me fix it.
@ZappaDong:
Yes, you should use the one I provided the link at the list of downloads.
Also, a bit late and I may be wrong, but your DRAM reads may be hindered by a MicroSD card(confirmation needed). Try ejecting it before you read off the NVRAM.
@fca.sjc:
First of all, thanks for pointing out my missing tips.
I'm not really sure if it includes the fixed vendor. I didn't really have any issues with the camera's flash, so they already included it(?)(again, needs confirmation).
For failed connections, make sure you flashed the NVRAM correctly(hence why you should test the telephony after you've repartitioned to stock 5.0 with the NVRAM backup flashed).If you failed to do that, I was told you should be able to recover the NVRAM data with Maui(?) software(confirmation needed, once again).
Thanks to both of you for pointing out these tips, I'll update the guide and credit you when I'll have more time. Cheers!
[*]For failed connections, make sure you flashed the NVRAM correctly(hence why you should test the telephony after you've repartitioned to stock 5.0 with the NVRAM backup flashed).If you failed to do that, I was told you should be able to recover the NVRAM data with Maui(?) software(confirmation needed, once again).
[/LIST]
Click to expand...
Click to collapse
After repartition, wifi, 3g and mobile signal works fine. I just cant flash twrp after unlocking bootloader otherwise i get a bootloop (unable to mount data and storage). So after i installed twrp and wiped/restore vendor and system, i reflashed stock recovery to acess android and then, restarted again to recovery. At this point, i did the write memory step again, using old vendor and the new vendor. None seem to work. I even backed up NVRAM using TWRP at first to make sure i did it right and tried to restore from there and it doesnt seem to be an IMEI issue. Maybe it has something to do with the frequency. Im on Brazil right now and idk
It does recognize my Sim card, my number, it downloads the data operators and etc but it doesnt connect to the mobile signal idk why. The bug starts at the restore step so it has something to do with this part.
I just test stuff but im pretty experienced at flashing and reflashing, etc. I guess only a dev can help and i actually went back to 7.1 UHANS rom, wich i got from 4pda.ru. Before using this rom, I was having a bluetooth audio stream bug and Ive tested like 4-5 roms, one for each kernel that was there. Lets see if someone can help me with this, cause i want oreo for better bluetooth audio stream.
Thanks for your help so far. I really apreciate it. This device is very good and we dont see many mods here on xda for it.
aurismat said:
@ZappaDong:
Yes, you should use the one I provided the link at the list of downloads.
Also, a bit late and I may be wrong, but your DRAM reads may be hindered by a MicroSD card(confirmation needed). Try ejecting it before you read off the NVRAM.
Click to expand...
Click to collapse
Thanks again!
I am using Windows 10 (bootcamp on the iMac) now and I have read the description in the 'old' [ROOT/TWRP] thread but used the files you have provided.
TWRP is working now, but I got an error that the ZIP file on the SD card was corrupted. Maybe I have damaged it when copying it to the SD card under OS X.
I am just redownloading it with Windows 10 and give it another try. (Yandex is very slow now, about 60 KB/s)
------------------------------------------------------------------
UPDATE
I have downloaded "WW_Phone-user_810_O11019_1528478718_release.zip" again, put in on the SD card, booted into Recovery, wiped system and vendor and chose "Install" , selected the "WW_Phone-user_810_O11019_1528478718_release.zip" file.
But I still get an error message.
Installing zip file '/external_SD/WW ... release.zip'
Checking for digest file
Skipping Digest Check: no Digest file found
[IN RED]Invailid zip file format!
Error installing zip file '/ 'external_SD/WW ... release.zip' [/IN RED]
Updating partion details...
...done
I have just copied the zip file from the download folder to the SD card - have I missed anything?
ZappaDong said:
And what TWRP.img should I use for
"3. Flash the recovery with fastboot flash recovery [twrp recovery name].img;"
in the next paragraph? Is this the "New recovery;" from the download section at the top?
Thank you!
Click to expand...
Click to collapse
Yup that one
@ZappaDong, yeah I kind of forgot to mention again - you should've extracted the .zip in which the backup came in. It's a backup, not an installation zip.
It needs to be extracted into its own folder inside the MicroSD card, so that then it could be used by TWRP to recover the partitions.
Thanks for pointing this out to me though, gonna edit it ASAP.
@fca.sjc bro AFAIK that problem of yours could be because of one or more of the following:
1. Your IMEI is missing or null. I would suggest SN Write tool (since I already tried it). Is quite effective, it is comparable to Maui Meta although I haven't tried it yet. (Tutorial here ==> https://forum.hovatek.com/thread-12306.html )
It is better to use PC restore tools since it writes directly to the nvram unlike apks like Chamelephon which (according to what I know) writes only to nvdata.
2. You need to switch the sims. What i mean is just if you have 2 sims on your phone, switch sim 1 in with sim 2. I forgot the explanation on it but it helps.
3. You need to switch off data connection on the other sim. On the several roms I tried on 4pda including this 8.1 pixel based rom, upon first bootup, the data connection on both sims are already on, therefore 3G cannot work. So first turn both sim's connection off then check if network mode is set to 3G. If not do the Solution #2.
JustAnormalGuy said:
@fca.sjc bro AFAIK that problem of yours could be because of one or more of the following:
1. Your IMEI is missing or null. I would suggest SN Write tool (since I already tried it). Is quite effective, it is comparable to Maui Meta although I haven't tried it yet. (Tutorial here ==> https://forum.hovatek.com/thread-12306.html )
It is the best IMEI restore tool since it writes directly to the nvram. (Meaning it retains even after wipes to data, system etc. via twrp)
2. You need to switch the sims. What i mean is just if you have 2 sims on your phone, switch sim 1 with sim 2. I forgot the logic on how that helps but I've seen it as a solution as the phone rereads the sims.
3. You need to switch off data connection on the other sim. On the several roms I tried on 4pda including this 8.1 pixel based rom, upon first bootup, the data connection on both sims are already on, therefore 3G cannot work. So first turn both sim's connection off then check if network mode is set to 3G. If not do the Solution #2.
Click to expand...
Click to collapse
Thanks for your help bro. I did check the IMEI while i was on this oreo rom. It seem to be ok. Number was there but i did not check if it was the right number. I might check it when i try to flash again. Probably later today when i'm home.
The problem wasnt just data connection, it was the connection itself. I couldnt call or receive SMS to activate whatsapp, for example. Like i said previously, those features were ok after repartitioning (on stock repartitioned). After the restore step, i did check all network options, including data, network mode, network connections available,etc. I'll follow your tutorial to restore the IMEI if the numbers are different then. I'll remember to take some screenshots next time so you guys can help me figure out what the problem is. Thanks again
aurismat said:
@ZappaDongIt's a backup, not an installation zip.
Click to expand...
Click to collapse
Yes, that did the trick. The installation went through and everything seems to work now.
Thank you again for your patience.
I saw there in the forum 4pda that are doing roms project treble pro zenfone go, only that I can not understand the mode of installation, you know how?
Ricardo Flowers said:
I saw there in the forum 4pda that are doing roms project treble pro zenfone go, only that I can not understand the mode of installation, you know how?
Click to expand...
Click to collapse
Yeah, it is possible -
FIrstly you'd need a vendor image that has fixed RIL(telephony) - vendor off this thread's 8.1 has RIL broken in Treble ROMs.
Luckily you can get it off any 8.1 custom ROM off ska-vova in 4pda. Just download any of his .zips(i.e. his ResurrectionRemix ROM(which imo is just official ResRemix with their Russian preference for a browser, but fine)), flash them and then backup the /vendor off it(and /boot for good measure)
Buuuuut then you need a TWRP that supports system image flashing - not sure if the one I provided here has it, if it hasn't - I'll post it here.
Then all you need to do is flash the Treble image, restore the /vendor(and /boot if you need to) and hope for the best!
Sadly the Havoc OS 2.0, the only ARM A-Only Pie-based ROM available here didn't work for me - just straight bootloops.
Your mileage may vary - if you get the Havoc OS 2.0 instaled, I'd love to read about it.
aurismat said:
Yeah, it is possible -
FIrstly you'd need a vendor image that has fixed RIL(telephony) - vendor off this thread's 8.1 has RIL broken in Treble ROMs.
Luckily you can get it off any 8.1 custom ROM off ska-vova in 4pda. Just download any of his .zips(i.e. his ResurrectionRemix ROM(which imo is just official ResRemix with their Russian preference for a browser, but fine)), flash them and then backup the /vendor off it(and /boot for good measure)
Buuuuut then you need a TWRP that supports system image flashing - not sure if the one I provided here has it, if it hasn't - I'll post it here.
Then all you need to do is flash the Treble image, restore the /vendor(and /boot if you need to) and hope for the best!
Sadly the Havoc OS 2.0, the only ARM A-Only Pie-based ROM available here didn't work for me - just straight bootloops.
Your mileage may vary - if you get the Havoc OS 2.0 instaled, I'd love to read about it.
Click to expand...
Click to collapse
Can you do a tutorial? I did not quite understand how it installs. Sorry, google translate does not help.
Deleted
Hello folks,
I ran into a poblem with my old Samsung Galaxy Grand Prime Plus. 3 years ago I was messing up with the phone and I ran into an invalid IMEI problem. As I was a real newbie, I brought it straight to a friend of a friend of a friend who had a phone shop, and he fixed it for me.
Everything OK until last week, when I suddenly realized that probably the guy had flashed the wrong IMEI to it, mistyping 2 numbers of one of the two IMEIs.
Currently, I then have a perfectly working phone, but the IMEI is incorrect and I need to fix it.
I don't have the box anymore, but luckilly the numbers under the battery are perfectly clear and readable, although this is quite an old device.
As the shop of the guy who did the work is long gone, I started to look around for instruction on how to deal with the problem, and I followed all the possible tutorials, but apparently I'm not able to fix the issue.
I just know it can be done, as this was done to the very same phone in the past, creating the problem. I just do not happen to know how he did...
Here's what I tried so far:
1. APP: Mobileuncle Tools
Whenever I tap onto "IMEI Backup Restore (MTK)" I get an error message that says "No support".
2. APP: MTK engineering mode
I open the app, and whenever I tap onto "MTK Settings" I get an error message that says: "Cannot find EngineerMode App - Mediatek chipset is mandatory and stock ROM must be installed".
I tried both Mobileuncle Tools and MTK Engineering mode with 3 different ROMs downloaded from different sources, before and after rooting the device with Super SU, but to no avail.
3. With any xposed module
This could be a solution... but not a real one.
At least according to all the documentation I found (also here on the forum), any xposed module like "IMEI Changer", "chamaleon", "device changer", "hijack suite free" etc only mask the IMEI in front of other apps, but do not really change the IMEI of the phone.
So basically I would still have a phone with an illegal IMEI on it.
Not ideal: this is not what I am looking for.
4. IMEI Maker and IMEI Repair
I followed the tutorial I found here:
https://forum.xda-developers.com/showthread.php?t=2399037
I encounter no errors at all, and TWRP shows a clean log, nothing seems to be wrong. But after flashing the new IMEI, nothing changes: with *#06# I can still see the wrong IMEI there.
The file in data/nvram/md/NVRAM/NVD_IMEI/MP0B_001 just remains the same, dating 2016, and does not get replaced by the new one.
I tried to replace the file manually, using ROM Toolbox Lite. At the beginning I could not delete the original MP0B_001 file, even after changin permissions to 775. It kept saying "File deleted" but the file remained there.
I then installed BusyBox Free, and it did the trick: now using ROM Toolbox Lite I definitely can delete the MP0B_001 file. The problem is that the original file keeps coming back again and again, after every reboot.
Nevermind if I place the new MP0B_001 file in the folder copying and pasting it or flashing it with TWRP, it will get overwritten by the old file with the wrong IMEI.
5. Flashing a Combination ROM
I didn't find a specific tutorial for this one, but I just tried to flash the combination ROM and see whether I could get any luck touching things in there.
No luck!
6. With SN write tool (windows software)
Here the big problem is, I can't find the BP file anywhere.
No AP_BP_database seems to contain the BP file for the MT6737T (that is the chipset of the G532F). As I am writing, I am thinking about trying to use a different BP file, from a different chipset. This will probably won't work, but after trying all of these, I mean, why not...
I also tried to look for the BP file into the folder /system/etc/mddb/ , as advised here: https://forum.hovatek.com/thread-11609.html . I looked for ir with any of the 3 different stock ROMs I tried to install. Yet again, absolutely nooooo luck here.
7. MTK Droid Root & Tools (windows software)
This won't even connect to the phone. That is, whenever I connect the phone to the PC, I get the following errors:
" --- Estructura de ROM desconocida, no se puede hacer backup ! "
That would be something like: "Unknown ROM structure, cannot perform backup"
The device gets recognized (hardware, model, build number...), so it should be a problem of drivers, cable or USB port. Also because I used the same setup to install all the stock ROM, TWRP, Super SU etc...
---------------------------
And here I am. After one week of try and fail, getting tired of all this!
I'm surprised on how persistent that wrong IMEI is, as I can't get rid of it in any way.
Do you have ANY kind of idea of what can I do?
As the points 1, 2, 4, 6 and 7 are specifically advised for MTK chipset. I'm starting to doubt that this is an MTK chipset altogether!!!
Thanks for your help
Peter
Update:
I tried with NCK Dongle AndroidMTK 2.5.6.2
Still no success (phone apparently not supported).
Hello every one .
Easy Firmware team proudly presents
The new site for root files WHICH SUPPORT ANY ANDORID VER FOR NOW
mod edit: xxxx
mod edit: xxxx Manager application
The site will be the source of root files in the GSM world
and it is free for everyone
It contains root files for all models and protections and if any new protection is released or new software is built, its root file will be uploaded directly!
mod edit: xxxx root provides full root access without problems
File sizes are between 7MB and 50MB
The download is free regardless of the number and size of files
Also the site allows you to report any file inside the site through the report button and also you can request a new file if it is not available through the site
The flashing process is done exclusively through the on-site tool
mod edit: xxxx Root Supports :
All models of Samsung devices, including exclusive models such as
A51 and M315F etc ...
The site contains mod edit: xxxx manager app to manage the root access and also to install any external addsons for the phone (such as pupg hacks etc.)
You can download files from the official website
mod edit: xxxxx
And through Google Play
You can download root manager app
mod edit: xxxx
https://play.google.com/store/apps/details…
Video For Website
mod edit: xxxx
Has anyone tried this? I hope i don't regret it. By the way, your .exe file is rejected as a virus when attempting to download it.
*UPDATE*
Tried it on SM-A207M, A20s
Does not work at all. Immediate boot.img fail
Was this tested?
I used Jamaica firmware as it matched one of the three file options. A207MUBU2ATC4. It also was ther most recent for Android 9. The wallpaper is horrific. Anyway, please fix this or at least test it before people assume it's working as you suggest. It's not.
SM-N910P worked perfectly
Already had my Note 4 (SM-N910P) rooted, but wanted to give this a try....,it worked perfectly. Only have one suggestion with the verbage the .exe will use in regards to what mode to reboot the phone into. The .exe has Reboot into Recovery which isn't correct for Samsung phones, so I clicked vol - to highlight reboot to bootloader, then clicked power button, as soon as the phone went to download mode the xxxx software did its thing and rooted the phone,
I do have a question in regards to the .apk file. After loading it does a root check and shows Not Rooted within the xxxx app itself (even though my phone was still rooted. So I uninstalled root, opened the xxxx again and yes still shows not rooted which now would be correct. Then rooted using xxxx recovery file download and went through the process, this is where I noticed the use of Recovery vs Download modes. First using adb reboot recovery... nothing happened...so I used vol - & then power to reboot to bootloader.... booooyaaaaa! Very smooth, superb work to anyone that helped put this tool together.
PimpinAintEasy ItJustAint
My Internet Security already blocked the download due to some HTTP content on the xxxx website. Later when I checked the download tool - 2 different anti virus complained about a Trojan in the file. Sorry, too risky for me.