hello
i'm using android Linux installer to install backtrack on my phone
i root my phone and install all tools that needed but when launch linux i got this error :
checking loop device ... MISSING
checking loop device ... /data/datacom.zpwebsites.linuxonandroid/files/bootscript.sh[99]: /data/data/com.zpwebsites.linuxonandroid/files/busybox: can't execute: permission denied
FAILED
error unable to create loop device
i edit bootscript.sh /dev/block/loop255 device is. I had to change the filesystem type from ext2 to ext3!
but the same error no thing change
i use stock rom 4.3
gt-i9500
is there any custom rom or kernel that support loop
any help ??
maybe follow this guide: http://www.securitygeeks.net/2013/03/how-to-install-backtrack-in-android.html
Tkkg1994 said:
maybe follow this guide: http://www.securitygeeks.net/2013/03/how-to-install-backtrack-in-android.html
Click to expand...
Click to collapse
the same problem
Here the link to the newest roms for the doogee x3
www.needrom.com/category/doogee/x3-doogee/
I am using linux and use the sp flash tool with wine with looks good so far,i have to study it first before starting,but i want to start the thread already.
first problem is unpacking the rar file ..... syntax error nearby unexpected symbol 'newline' after the command #unrar e <DOOGEE-X3-6.0.rar >solved,installing unrar and reboot system(!)...
second problem rooting phone after installing ...BETA-SuperSU-v2.50.zip... recovery said installation aborted...
Than smart phone flash tool wont recognice the doogee x3...
phone is connected through usb and connected as usb storage...(i am googling for advice...)
thanks for some advice
(SOLVED see post from 9okt)rooting DOOGEE X3
After putting BETA-SuperSU-v2.50.zip. on my sdcard i went in recovery mode,volume up and power button pressed, than choosed update system by sdcard,pressed power button,choose BETA-SuperSU-v2.50.zip and pressed power button.... recovery said installation aborted..
what to do...
thanks for some advice
after flashing the recovery i got the following result...
a red line(download DA 100%) and an popup telling ERROR: S_ TIMEOUT (1042)
on the terminal....
[[email protected] SP_Flash_Tool_exe_Linux_v5.1632.00.100]# ./flash_tool.sh
QGtkStyle was unable to detect the current GTK+ theme.
Qt: Session management error: None of the authentication protocols specified are supported
QMetaObject::connectSlotsByName: No matching signal for on_pushButton_browser_clicked()
QThread::setPriority: Cannot set priority, thread is not running
"07-30-2016"
QObject::moveToThread: Cannot move objects with a parent
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:13.2/usb2/2-5
[email protected]/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0
[email protected]/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.1
[email protected]/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.1/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 2000
device pid = 2000
com portName is: /dev/ttyACM0
Total wait time = -1472583651.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
COM port is open. Trying to sync with the target...
Failed to Connect DA: S_TIMEOUT
Disconnect!
BROM Exception! ( ERROR : S_TIMEOUT (1042)
[HINT]:
)((ConnectDA,../../../flashtool/Conn/Connection.cpp,131))
thanks for some advice...
connecting not as root but as user after setting gtk theme in user dir
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:12.2/usb1/1-4
[email protected]/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0
[email protected]/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.1
[email protected]/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.1/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 2000
device pid = 2000
com portName is: /dev/ttyACM0
Total wait time = -1472900250.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Connect BROM failed: S_COM_PORT_OPEN_FAIL
Disconnect!
BROM Exception! ( ERROR : S_COM_PORT_OPEN_FAIL (1013)
[COM] Failed to open COM port.
[HINT]:
)((ConnectBROM,../../../flashtool/Conn/Connection.cpp,85))
solved,i installed ubuntu followed al the instructions put the flashtool on upgrade connectthe phone and android 6.0 was installed after a few minutes.
devrieshh said:
solved,i installed ubuntu followed al the instructions put the flashtool on upgrade connectthe phone and android 6.0 was installed after a few minutes.
Click to expand...
Click to collapse
I made it in Windows yesterday successfully. There is also a way to flash TWRP on Doogee X3 running Android 6.0.
Look here: http://4pda.ru/forum/index.php?showtopic=713470&st=100#entry51434308
The Problem is, I don't understand russian and I even can't type it. Also the Captcha is a major problem. I think there is an account needed to be able to download the board attachments. Otherwise "404" error. Could anyone Download TWRP for Android 6.0 from this site + the scatter file there ? Would be awesome :highfive:
EDIT: I got it and already installed it. it works ! twrp on doogee x3 running android 6.0. just flash it with sp flash tool. you know how if you had flashed 6.0 already
link: http://www18.zippyshare.com/v/yAM5FXOt/file.html
have fun
EDIT: don't try to root it. doesn't work. neither supersu, kingo root nor kingroot. i tried it and my nvram was corrupt after trying with supersu. had to flash back imei and wifi mac address. i'm back on android 5.1 for this device.
Flashing didnt work,it said coudnt find files or path wasnt right,a red line...
after a wile the flash window got black and wite got frosen,i closed it started to reload and then the flash window didnt showed up and the message in the therminal was ...
:~/Desktop/SP_Flash_Tool_exe_Linux_v5.1520.00.100$ ./flash_tool.sh
QGtkStyle was unable to detect the current GTK+ theme.
QObject::moveToThread: Cannot move objects with a parent
so i dont know what to do now for the moment
solved,reinstalled ubuntu.. flashed TWRP_3.0.2_Doogee-X3_Android-6.0.zip
Ok i managed to root our doogee X3,tryed it with an old root tool used with my samsung gio,flashed with the TWRP 3.0.2.
SOLVED (file is already .img ,not .dat) trying to port cm-13.0-20160817-UNOFFICIAL-TECNO W4-nana (MTK 6580) i got a problem after the ./sdat2img.py command .../S2603_DG_A42_PUBLIC_M_V0.2.8_S160628$ sudo ./sdat2img.py system.transfer.list system.new.dat sys
tem.img
Traceback (most recent call last):
File "./sdat2img.py", line 131, in <module>
main(sys.argv)
File "./sdat2img.py", line 75, in main
version, new_blocks, commands = parse_transfer_list_file(TRANSFER_LIST_FILE)
File "./sdat2img.py", line 43, in parse_transfer_list_file
trans_list = open(TRANSFER_LIST_FILE, 'r')
FileNotFoundError: [Errno 2] No such file or directory: 'system.transfer.list'
anybody know what to do...
doing the same with the cm 13 rom...
/cm-13.0-20160817-UNOFFICIAL-TECNO W4-nana$ sudo ./sdat2img.py cm-13.0-20160817-UNOFFICIAL-TECNO
%20W4-nana .transfer.list system.new.dat system.img
Traceback (most recent call last):
File "./sdat2img.py", line 131, in <module>
main(sys.argv)
File "./sdat2img.py", line 75, in main
version, new_blocks, commands = parse_transfer_list_file(TRANSFER_LIST_FILE)
File "./sdat2img.py", line 43, in parse_transfer_list_file
trans_list = open(TRANSFER_LIST_FILE, 'r')
FileNotFoundError: [Errno 2] No such file or directory: 'cm-13.0-20160817-UNOFFICIAL-TECNO%20W4-nana'
devrieshh said:
Ok i managed to root our doogee X3,tryed it with an old root tool used with my samsung gio,flashed with the TWRP 3.0.2.
Click to expand...
Click to collapse
[at first for everyone to know: it affects Android 6.0 for the Doogee X3. Android 5.1 is no problem.]
root checker told me my device is rooted after I flashed your zip. The problem I experienced was, I got no asking for root triggered by any app which uses root permission. And also when I try to update SuperSU binary inside the app it tells me there is no "su data" and it couldn't update it. I think to get a flawless root permission it would take a while
SOLVED $mkdir working and than.... $ sudo mount -t ext4 -o loop /img-tools/sys.raw working/
so i did succeed to format the system.img to sys.raw but after trying to mount the sys.raw image i got the following response after the in the tortual suggested command
Am I right that you are already working in the directory "/img-tools" and want to mount the sys.raw file in it ? So then, if you determine to mount "/img-tools/sys.raw" that this could be interpreted as mount "/img-tools/img-tools/sys.raw", a directory that doesn't exist ?
Or am I seeing something wrong ?
i have compiled the system.img file to sys.raw and i want the sys.raw folder so that you can swich framework,apps and other folders with roms to port
i want to have the outcom from the sys.raw ext4 file mounted in the /base home/working folder..
see .http://forum.xda-developers.com/chef-central/android/guide-how-to-port-lollipop-marshmallow-t3283452
mounting system.img should do the job ,so you do not have to format it to sys.raw.
i made a map working in the img-tools map,but with the command below i got ...mount point working/ does not exist
base home/img-tools$ sudo mount -t ext4 -o loop system.img working/
mount: mount point working/ does not exist
devrieshh said:
i have compiled the system.img file to sys.raw and i want the sys.raw folder so that you can swich framework,apps and other folders with roms to port
i want to have the outcom from the sys.raw ext4 file mounted in the /base home/working folder..
see .http://forum.xda-developers.com/chef-central/android/guide-how-to-port-lollipop-marshmallow-t3283452
mounting system.img should do the job ,so you do not have to format it to sys.raw.
i made a map working in the img-tools map,but with the command below i got ...mount point working/ does not exist
base home/img-tools$ sudo mount -t ext4 -o loop system.img working/
mount: mount point working/ does not exist
Click to expand...
Click to collapse
I'm more familiar with DOS. But the principle should be the same.
i will try to understand the link you posted...will keep you informed
EDIT: if i'm right, then you are inside the "img-tools" folder and trying with this command to mount system.img to a folder named "working" in it.
e.g.: /base home/img-tools/working
but you want to mount it to the folder /base home/working, right ?
so you have to type it in another way. try: sudo mount -t ext4 -o loop system.img /base home/working/
I'm not sure what Linux expect. maybe the slash before "base home" in my example is not needed.
fixt it http://stackoverflow.com/questions/8663891/how-to-mount-the-android-img-file-under-linux
/Downloads/doogee x3 porting/base/base home/img-tools$ mkdir sys
[email protected]:~/Downloads/doogee x3 porting/base/base home/img-tools$ sudo mount -t ext4 -o loop sys.raw sys/
[email protected]:~/Downloads/doogee x3 porting/base/base home/img-tools$
i had to use my sys.raw file and make a sys map with ...mkdir sys ... command
How to convert .img to .raw... download img-tools extract it in a folder (http://forum.xda-developers.com/chef-central/android/guide-how-to-port-lollipop-marshmallow-t3283452) put the system.img from base rom with it and run the command... ./simg2img system.img sys.raw
I sat the whole night to find any supersu which roots flawless our doogee x3 on android 6.0. and i found it ! i flashed, installed, reflashed about hundred of times another supersu version by version downwards. it's the version 2.61 which works properly ! and yes, you can still use the playstore update of supersu + binary update inside the app without losing root or getting a boot stuck. see linked zip for working supersu you'll better save it safely
http://www89.zippyshare.com/v/iUH99ub0/file.html
EDIT: I'm not sure it could be important, but I kept the system partition as read only as I installed SuperSU. Maybe you want to do it also.
i bought a doogee x5 so i am no longer active in this forum
Dear Friends,
I have Samsung Galaxy A7 (2018). I changed its pattern lock few days back, and Restarted the phone and realized that i forgot the pattern lock COMPLETELY.
I Googled the problem, and found most authentic post below:
RecoveryMode
I tried all methods on this post, but none could resolve my problem.
The first post said Download Aroma file manager on sd card and opt Update from SD card option to install Aroma Filemanager and delete the gesture.key file
I tried installing various versions of the Aroma File Manager app, but all installation aborted with Signature verification failed error having error code:
Code:
"E: failed to verify whole-file signature" "E: signature verification failed" "installation aborted."
I have some precious family pics inside the mobile, that why I want to recover it,
Please guide me how can i install the Aroma File Manager
I also tried the "adb" option from linux machine, where "adb devices" command didnt list my phone, i tried creating the file in /.android/somefile name but above command didnt list my file
Hi,
I've been using some custom Lineage with my S8 SM-G950F which worked for for a while and now I'm trying to get back to stock, usually its quite simple download the firmware from Sammobile and flash it with Odin.
I did it and it seem to work perfectly, download the latest version G950FXXSADTI1_G950FOXMADTI1_ITV, my phone is from Italy and bough directly from samsung.
I flashed with Odin 3.14 pointing the 4 files, used the CSC not the HOME one, clean everything, no errors.
I started to install things and after installed most of the stuff I try to add my Credit Cards to Google Pay and it does not let me do it and tell me it is a rooted phone and I could not do add credit cards.
Netflix doesn't even appear on PlayStore to donwload.
Everything works fine, I tried to reflash a couple of times with no success
Only thing strange is when I enter into recovery, it gives me some errors as bellow:
#fail to open recovery cause (no such file or directory)# --> the cause would be me holding keys while starting the phone I believe
Supported API: 3
e: unknow voulme for path [/odm]
e: unknow voulme for path [/vendor]
e: unknow voulme for path [/odm]
e: unknow voulme for path [/vendor]
#MANUAL MODE v1.0.0#
remove failed dir '/system/carrier/ATT/priv-app/AttIqi_ATT (no such file or directory)
can't open directory /system/omc/SUP/
....some others similar lines
E:[libfs_mgr]is_dt_compatible() firmware info not valid : '/proc/device-tre/firmware/android/compatible: no such file or directory
IF someone can help me here, I appreciate
Solved, just closed the bootloader.. Silly of me to forget it
Thanks anyway.