Hey guys, i've been doing a couple searches but it doesn't seem like I've been able to find the answer I was looking for. How can I turn up the phones earpiece volume? (ie. the speaker at the top of the phone in between the blinking lights for incoming/outgoing calls).
I tried editing everything outlined in this thread:
http://forum.xda-developers.com/viewtopic.php?t=41273&postdays=0&postorder=asc&start=0
without any luck other than getting my ringtones and media volumes to play louder.
I also found another thread here:
http://forum.xda-developers.com/viewtopic.php?t=42246&highlight=sound+vol - that asks the same questions without any results.
Can this be done? I hope so because during calls the volume is just too low for my tastes, even with the slider up to the highest setting.
Thanks.
Same problem here
Same here the volume on this thing is terrible. Speaker phone is useless as well. I used to use a program on my treo called volume care wish there was something like this for the MDA, the only way i can hear it at all in the car is with my bluetooth and everything turned up to max.
there has to be some sort of fix for this.
I'm sure most of you know what I'm talking about. If you recieve any notifications When listening to any audio through headphones (or through the mini usb port), the device pushes the notification sound through the speaker. This is fine when having a ringer enabled because I'd obviously want to hear the ring. What I dislike though, is when I have notfications (rings, text messages, etc.) on silent or vibrate, it pushes the audio that I'm listening to through the speaker still. I've always disliked this in WM. My PPC6700 did the same thing, but now I'd really like to know if there's a way to change this.
Now that I have an 8GB SD card, my Titan has started to become my primary mp3 player. I do FOH sound at a local club, and when playing music between bands, it's really annoying to have the music suddenlly cut out because a phone call is coming in. Likewise when I'm quietly watching MobiTV with my headphones on at work, and suddenly, Survivorman is blaring through the speaker because a call is coming in...You get the point. The ringer is off, but the phone still trys to let a ring through the speaker anyway, and since no ring is selected, it pushes any audio being played through.
I realize that this relatively simple problem probably does not have a simple solution as this is probably buried deep in the architecture of how WM handles audio gateways...that almost sounded like I knew what I was talking about; I can assure you that I do not . This is where you guys come in. I'm willing to test any ideas you guys have got. I don't care if it f&#*s up my phone...a hard reset isn't going to ruin my day. I'd just like a solution for this.
Ideas??
Thanks for your help and for this forum!..it has saved my phone more then a few times already.
Me too having the same problem. I listen to music via my bluetooth mono headset and these notifications (whcih I get plenty) disconnect the bluetooth audio gateway, forcing me to reach out to my phone and enabling the audio gateway again.
Yeah, I hate that too! I have the i760, one other thing on this phone I dislike is that the volume must be on to hear audio through my headphones. But there I am in a store listening to some rock at a loud volume, and there it is playing for the entire f'n store to hear when I get a call, thanks PPC!
Possible Solution!!!!
Might I recommend a Profiler. Like PPCProfiler. Just Google it.
What you could do is create a profile called music or what ever you want to name it. Then you could set up that profile to turn ringers on with the volume level you like and with or without vibration and select silent or vibrate only for the notifications. You could really but together any combination. I believe with PPCProfile you can even make a profile as a Headset Mode. So it will auto detect the headset and switch without having to do anything else.
Cheers.
Curious G.
Thanks for the reply, but a profiler isn't exactly what I'm looking for. I've had them before in previous roms. The problem isn't that it's an inconvienence to switch to silent or vibrate. It's that when things are silenced or on vibrate, any background audio is pushed through the speaker while the notification is going off. Meanwhile that audio that I want to be played cuts out of the path that I want it going through (ie. headphones).
Thanks tho...I'm open to any ideas.
Hi all,
When I talk to others using my SGS, they hear a lot of background sound of my side. Sometimes the background sound is even noisier than my voice, so I have to talk very loud at the phone. This problem is worse if I'm in the crowded areas / subway.
I think the mic is too sensitive on my SGS, but I wonder if anyone else experience the same problem. Is my phone a faulty one?
there is an option to turn off auto mic boost, forgot the name
you know the one that option that automatically add mic gains
that might help
i also saw a few apps that lets you control the mic volume and gain, also forgot the name of those but it's in the market, or you can simply Google for android apps to control volume
I dont know what I am doing wrong but I find the sound level extremely poor for calls
I tried with a bluetooth headset, the outside speaker and the jack with my mp3 headset
it's pretty weird since when I play videos or music I am impressed by how loud I can push the Tab...
I am on AT&T with JMC (but was the same on JM6). And I set the sound at max
anybody has the same issue? Am I doing something wrong? Or is there any sound booster app for calls? (and is it necessary?)
Thanks for your help
My Tab isn't phone-enabled, but since you're new to Android, I thought I should point out that there are multiple volume settings, and in-call volume is one of them. Menu Key -> Settings -> Sound Settings -> Volume should give you all the sliders (Ringtone, Media, Alarm, System, Notification...). There are apps/widgets too that let you get to/change these settings without having to go into the settings menu every time (audio manager has been a decent widget for me). Until you're actually in the call the hardware rocker is usually doing the ringtone or media volume.
When I use mine with Skype 60% is usually blaringly loud for me, and I don't even have the system or media volume maxed out.
Sorry if it's something you know you've done, but thought it might help. If not, maybe someone else has had the same issue and solved it.
BuglessFan said:
My Tab isn't phone-enabled, but since you're new to Android, I thought I should point out that there are multiple volume settings, and in-call volume is one of them. Menu Key -> Settings -> Sound Settings -> Volume should give you all the sliders (Ringtone, Media, Alarm, System, Notification...). There are apps/widgets too that let you get to/change these settings without having to go into the settings menu every time (audio manager has been a decent widget for me). Until you're actually in the call the hardware rocker is usually doing the ringtone or media volume.
When I use mine with Skype 60% is usually blaringly loud for me, and I don't even have the system or media volume maxed out.
Sorry if it's something you know you've done, but thought it might help. If not, maybe someone else has had the same issue and solved it.
Click to expand...
Click to collapse
yes this I had figured out and set at the maximum
Everything non call related is really strong... It's conversation from normal calls that is ridiculously low
Am I the only one ?? What's wrong with my tab ?
Anyone with an opinion about this ?
Voice-enabled on AT&T with JM6. Have good results with the built-in speakers and cheap Nokia BH-214 stereo Bluetooth earbuds. I ordered the OEM earbuds, but I do understand that the 3.5mm jack port in finicky. Is your Bluetooth 2.1 or newer? Do you have many open applications when trying to place or receive calls? I've notice the sound stutter a bit on the speakers when I've got several apps open.
Here's something I noticed, when in call using my BT Headset, the volume slider sometimes says its on max but the output isnt. Try to lower or increase your volume. Once you hear the max level beep, it gets louder.
Im on a SingTel Tab by the way.
ishtangli said:
Here's something I noticed, when in call using my BT Headset, the volume slider sometimes says its on max but the output isnt. Try to lower or increase your volume. Once you hear the max level beep, it gets louder.
Im on a SingTel Tab by the way.
Click to expand...
Click to collapse
Thank you, will try right away
Edit: yeah I can definitely reduce the volume but my max was my actual max. As anybody tried to compare the volume on the speaker when playing music whith the volume on the speaker when on a call... It's like 5 to 10 times higher volume on a call !! And then same issue on a headset
DonDerham said:
Voice-enabled on AT&T with JM6. Have good results with the built-in speakers and cheap Nokia BH-214 stereo Bluetooth earbuds. I ordered the OEM earbuds, but I do understand that the 3.5mm jack port in finicky. Is your Bluetooth 2.1 or newer? Do you have many open applications when trying to place or receive calls? I've notice the sound stutter a bit on the speakers when I've got several apps open.
Click to expand...
Click to collapse
As mentioned I tried it with everything I could... The default external speaker, a simple stereo headset (Not bluetooth), a bluetooth headset. They all give the same. Low volume
If you don't like volume in speaker, headset, bluetooth....You can change settings in "hidden" Audio menu. There you can change volume of individual ouput, but be careful!!!!!
Before change anything, make sure you can put it back the same number if you are not satisfied or have problem ..so wright it somewhere anything you wish to change.
Good Luck with experiment. If I remember correctly(from my old Samsung i780-Windows phone) "TX" settings is for output and "RX" for imput, but I can be wrong, so be careful.
Alcibiade said:
Thank you, will try right away
Edit: yeah I can definitely reduce the volume but my max was my actual max. As anybody tried to compare the volume on the speaker when playing music whith the volume on the speaker when on a call... It's like 5 to 10 times higher volume on a call !! And then same issue on a headset
Click to expand...
Click to collapse
what I do is, when in a call, I lower the volume by about 2, then increase it until i hear the max volume beep. The moment i hear it, the volume on my headset usually jumps up.
I have the same problem with the speaker volume. At maximum you cannot hear it. The bluetooth seems to work OK. IIRC JK5 software seemed to work correctly.
09CarreraS said:
I have the same problem with the speaker volume. At maximum you cannot hear it. The bluetooth seems to work OK. IIRC JK5 software seemed to work correctly.
Click to expand...
Click to collapse
So I guess for you too, music or movies play with a high volume on the speakers whereas for calls it's rather low volume ?
Yes bluetooth or headset I can hear but still quite low volume compared with music...
stefanopolis said:
If you don't like volume in speaker, headset, bluetooth....You can change settings in "hidden" Audio menu. There you can change volume of individual ouput, but be careful!!!!!
Before change anything, make sure you can put it back the same number if you are not satisfied or have problem ..so wright it somewhere anything you wish to change.
Good Luck with experiment. If I remember correctly(from my old Samsung i780-Windows phone) "TX" settings is for output and "RX" for imput, but I can be wrong, so be careful.
Click to expand...
Click to collapse
My problem is specifically for calls. Anything else is fine and working well. That's the weird issue... I dont want to boost the volume for anything else!
That's pretty weird... I have been playing with the tab and I found out that for calls, the highest level I can have (by hear) is two notches below the highest. That's by far the loudest I get (If I push higher the sound decreases)
Am I the only one ? It really pisses me off.... I don't know how it can be like that (I am on JMC ROM after flashing a JM6 ROM over the JK5 from Russia (I am on an AT&T Tab flashed to get phone working)
Someone else get the same experience ?
I can confirm that the max 'in call' volume is two notch below the max !!! And I have the same tab/setting of the OP.
Aren't there some codes you can enter to adjust the volume level on calls and music, etc.?? like the Galaxy S?
pakalrtb said:
I can confirm that the max 'in call' volume is two notch below the max !!! And I have the same tab/setting of the OP.
Click to expand...
Click to collapse
Thanks ! Ina sense I am a littel bit relieved to see I am not the only one !
Such a stupid bug. Come on Samsung...
FYI it is fixed with the firmware JME
Sound level is much more acceptable and the highest level is not anymore two notched below the max
Tried to ask in another thread but it was kinda off topic.
Last I knew people were playing with diagnostic codes but there was no consensus on what did or did not work.
Audio from the headphone jack and seemly the blue tooth was too quiet.
Is this still an issue?
Is that a no?
In all truth, i don't use the bluetooth. But i just checked my headphones, and they sound OK. My sony earphones work great on the phone. I did d/l that one app... Media Volume Settings and set the volume all the way to 100...that may be what is making mine work better. Hope this helps!
haven't tried Bluetooth...
But when i tried headphones it was waay to loud even at 1.
I don't know how to lower the volume using codes.
You should look through the diagnostics codes thread. It has some stuff about sound changes in there as well as some of the registry tweaks you should look up if you're unhappy enough with it to need to change something.
Funkadube: I did and couldn't seem to get any reliable change. Plus having to redo it everytime I restarted the phone seemed crazy.
I know when I had mine the volume level out of the head phone port was NOT loud enough when hooked to my car radio even though every other phone I've ever had was. You'd have to goto MAX VOLUME to get it very loud and if it was a quiet song or something not at loud (I'm staring at YOU SLACKER RADIO) then you could barely get it listenable.
I then installed Bluetooth module into the car and had the same issue with it also.
I'd wish I knew someone with one I could test IRL to see if its still a problem. I'd love to switch back to WP7...
Is there a way to boost the out-of-call Bluetooth volume on the Samsung Focus? Between builds 7712 and 7720, the Bluetooth volume for voice dial responses, TellMe, and text-to-speech were drastically reduced and now they are so low that I can't hear them with the phone turned all the way up to 30/30. I used to use the phone at 20/30 with my car's Bluetooth without a problem on 7712 and 7390. Has anyone else noticed this change since upgrading to 7720?
I didn't see other people complaining about the volume in the accessories thread.
I also have a bt headset and works fine for me.
EnderPsp said:
I didn't see other people complaining about the volume in the accessories thread.
I also have a bt headset and works fine for me.
Click to expand...
Click to collapse
I have a Bluetooth headset and it isn't as bad with the headset. But the text-to-speech is still significantly lower than call volume. In fact, the real issue is that there's a huge imbalance between the out-of-call volume and in-call volume with Bluetooth headsets in 7720.
As I mentioned before, when the phone is paired to the car I can turn the phone up to 30/30 from 20/30, but I still have to boost the volume from the car side about 5 levels higher when I'm out-of-a-call to get any decent level of audio out of the phone. The problem then is that when I take a call it is way too loud and I have to rush to turn down the volume on the car side. It makes the use of the feature so inconvenient that I've just turned it off. While I would be perfectly content with Microsoft returning volume levels to what they were since 7004, I'd just as readily use the Samsung Diagnostic app to make the adjustment myself, if it is possible. I'm looking for any remedy at this point.
Text-to-speech was the feature I was looking forward to the most in Mango, and now it's the only feature of the OS I can't use. I can't express how frustrated and disappointed I am that this has happened, and I just can't understand why this change was made. I've seen no reports of anyone ever complaining that the volume was too loud before 7720. It's one thing if I was seeking a feature that wasn't implemented, but it is implemented and it's broken. I just wish there was some solution or recourse to make it usable again.