As though I've dragged down at end of phone call - Xiaomi Redmi Note 7 Questions & Answers

When I have finished a phone calk and want to hang up I see the notification screen from the top and have to swipe it up so that I can get to the red end call button.
Could it be me accidently swiping down during the call or is this what happens? I've never has this problem with other phones. Does anybody else experience this?
I am using miui 11 and had the same problem on miui 10. Official EU phone.
Thanks for any help to this annoying problem

Related

Phone locks "on call" - phone app crash

Hi,
I faced this problem too often, so I ask on this forum to know if it only happens to me:
when I end the call, telephone programs stucks. In the top bar, the indication of an on going call is still there. Everything is working except telephone application. I can't open the telephone options. Even if I turn on Airplane mode, the phone logo in the top bar remains.
Any idea?
I had that problem once. Did it occur when you dialed a number not in your phone book? It turned out the prompt for saving a new dialed number was still there but I somehow couldn't access it. Perhaps turn that setting off?
no, it was an outgoing call to someone in my phonebook. (at least in my last problem)
facing the same problem. after ending a call the phone app freeze a couple of minutes and sometimes more than ten minutes
Did you installed the HTC patch to avoid the freeze ?
I didn't.
Could it be usefull there ?
This is really annoying if you have to wait 10mn before doing an another call !
Problem happened again
The problem happened again yesterday.
But worse. I was leaving a message on an answering machine. and I couldn't end the call !
Pressing the right key (end call) had no effect !
Usually in my previous problems, the other user was ending the call.
So I had to switch off the phone in comm manager !
I'm surprised that no one else faced this problem !
I tried to follow one's advice to wait then until phone gets back to normal. (release the phone icon in the top bar).
After one hour, I finaly rebooted the phone to be able to do an outgoing call.
Help !
Phone blocks during or after a call
Hello guys and girls
I had the same problem last week, a couple of times in a row, I was on the phone with a contact, after a couple of minutes I couldn't hear anything anymore and tried to end the call but no joy, a soft reset did the thing the first time, the second I waited a couple of minutes wich worked aswell. It was very annoying I must say especially as it happened 4 times in a row...
Hoping for a solution
Greetz
It seems a bug. You can press volume up/down buttons on the device itself to open the volume bar screen. After that just press somewhere on the grey area to go back to home screen. The top bar will restore from the phone application.
It's not the top bar. The phone application is completely unavailable.
We see the top bar,but the phone icon is stuck. Like if we were still on call.
I too have a similar problem.
Although I haven't particularly logged the prolems, I think that it only happens on incoming calls, and not outgoing ones.
During a phone call, the incoming sound just goes mute, and afterwards I can't hang up the call.
I reckon I have lost well over half the calls I have received because of this.
Luckily, not many people call me!!
I reckon this is a CRAP phone, and am seriously thinking of getting a REAL phone, and just using the HD as a PDA device. Good old HTC!!!!!!
I edited the title of this topic.
The phone app is really stucked : I called an answering machine, I wasn't able to end the call !
Help !
I am thinking of changing ROM.

2nd call/Call waiting

I have a random problem with my Touch HD.
If I am in a call and someone else calls me, it puts the 1st call on hold and then puts the other call through without any warning/alert or anything.
Does anyone know if this is an option that I can change? Am I pressing the switch/accept button with my face when I'm on the phone?
I have looked through the phone options but I cant find anything to do with 2nd lines/call waiting.
I am running Duttys 1.7 if that makes any difference..
Thanks

*SOLVED* Buttons light up, but screen stays black after stanby

Hi guys.
I have this strange problem.
If I dont use my phone for a while and I go to use it it the screen sometimes doesnt come on. The buttons light up but that is all.
i have tried to call it when that happens and I can hear a ringtone but the phone itself doesnt ring. The only solution is to pull the battery out.
When I switch it back on the call I made to the phone doesnt appear on the call history as a missed call either.
I am using energy rom
Anyone got any ideas?
salv90 said:
Hi guys.
I have this strange problem.
If I dont use my phone for a while and I go to use it it the screen sometimes doesnt come on. The buttons light up but that is all.
i have tried to call it when that happens and I can hear a ringtone but the phone itself doesnt ring. The only solution is to pull the battery out.
When I switch it back on the call I made to the phone doesnt appear on the call history as a missed call either.
I am using energy rom
Anyone got any ideas?
Click to expand...
Click to collapse
mine done that, i always use the call button rather then the hang up to wake it up, not had a problem since, hope it helps!
Nice to know I am not alone.
Just been looking at miri's latest rom and apparently he has put a fix in for some people whose phone didnt wake up, so am flashing phone now to see how it goes
Just as an update, been three days since I reflashed with miri rom and no problems.

WP7 End Call Issue

Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon
jonathan.stowell said:
Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon
Click to expand...
Click to collapse
Did you not try the end call on the screen? Not the hard one on the bottom right of phone
Russ
The screen turns off when making a call so the touch buttons are not available. This is why I have to remove the battery as I have no other way of bringing the display back to life. Obviously if I make a call and the other person hangs up it's fine. However if they do not answer and it goes to voicemail or I call my voicemail I get stuck in a never ending loop of press 2 to hear your messages.
jonathan.stowell said:
The screen turns off when making a call so the touch buttons are not available. This is why I have to remove the battery as I have no other way of bringing the display back to life. Obviously if I make a call and the other person hangs up it's fine. However if they do not answer and it goes to voicemail or I call my voicemail I get stuck in a never ending loop of press 2 to hear your messages.
Click to expand...
Click to collapse
Official windows phones have no hard end call button, just the on screen one, therefor I dont think its possible to end a call with the hardware button. Yes, the screen goes off when making a call, but due to the proximity censor it should come back when you move it away from your head. If it does not, make sure its not covered, even a screen protector can block the proximity sensor. Its located next to the speaker.
Hmm I removed the screen protector and still no joy when I move the phone away from my face. The screen just remains black. I did crack the screen about 5 months ago and had it replaced, perhaps they've done a poor job on this....
Don't think so... My is in perfect shape. proximity works on android but not on wp7... i also can't press end call button.
same thing with me
well i get the same problem with mine also, is there anything we can do for that.
I have the same issue, though it only happens to me when calling my voicemail. I hit "end call" and it just hangs there with the message "Ending call..." and I have to pull the battery :/ Regular phone calls have been just fine though.
Finally cracked this one!
I have been experiencing this issue on my Optimus 7 phone since day one, on all firmware versions and I now have the latest update.
This is what worked for me:
-set the automatic brightness to off and choose any manual setting that suits your needs, I chose medium.
-set the screen timeout to never (not sure that this is necessary, I will change it back to 30 sec to see if the issue returns and post back)
I hope this works with your phones, it was really frustrating to pull the batery out. Good luck!
I've had this issue as well. Pressing the end call button on the screen won't end many of my calls, voicemail or to another person. But it's rare enough that it hasn't bothered me, too much. But is a problem that needs to be figured out, if possible.
We should come up witha way to re map the hard buttons to usefull use
jonathan.stowell said:
Hi Guys,
I have been having issues when trying to end a call with the new WP7 Rom. I also used to have this when using Andriod Roms.
When I go to end a call, pressing the end call button does nothing apart from light up the keypad. I've tried pressing every button but nothing but the keypad lighting up happens, the call never ends! I have to remove my battery and switch the phone back on to get the use of my phone back.
I have :
HardSPL 2.08
MAGDLR111
Radio 2.15.50.14
Any Ideas?
Thanks,
Jon
Click to expand...
Click to collapse
I'm assuming your phone is an HD2. First of all, the call should automatically end when the other party hangs up. Secondly, just hit the Power button to turn the screen back on and then unlock the phone and hang up. What is so difficult? WP7 remaps the HD2 buttons so they don't work as they did in WM.
swangoose said:
I have been experiencing this issue on my Optimus 7 phone since day one, on all firmware versions and I now have the latest update.
This is what worked for me:
-set the automatic brightness to off and choose any manual setting that suits your needs, I chose medium.
-set the screen timeout to never (not sure that this is necessary, I will change it back to 30 sec to see if the issue returns and post back)
I hope this works with your phones, it was really frustrating to pull the batery out. Good luck!
Click to expand...
Click to collapse
Worked. T H A N K S!!!

[Q] Issue with Call-Waiting

Have a weird issue with my call waiting -- it just seems to go through and switch me over without notice and without my input. I'll be talking to someone, and then suddenly I'm talking to someone else .. ?!?!
Anyone else having this issue? I don't even hear a -beep- like my old phones which used to warn me of a second call ..
My theory is that when the call comes through the screen lights-up and waits for my input and perhaps my face is accepting the change-over?!
If I hold the phone and use speakerphone, I see the prompt for the second-call ..
any help appreciated!
Exactly same isssue..
Your theory is right, i'm experienced twice at least today.. There is a big green button at lower screen area while call waiting state.. It's too easy to activate one of them accidentally with your face..
Anyway, i want to change dialer, but every dialer app only change dialer, but "on-call screen" stay stock one which i don't like...
Any suggestions ?
Reason4444 said:
Exactly same isssue..
Your theory is right, i'm experienced twice at least today.. There is a big green button at lower screen area while call waiting state.. It's too easy to activate one of them accidentally with your face..
Anyway, i want to change dialer, but every dialer app only change dialer, but "on-call screen" stay stock one which i don't like...
Any suggestions ?
Click to expand...
Click to collapse
Sorry, hadn't seen your response ---
I still haven't resolved this issue either .. very annoying. I'm talking to one person then all of a sudden I'm speaking to someone else.
I've tried to reproduce the problem by having a conversation and having someone then call me .. but I couldn't .. this time I heard the call-waiting beep and it didn't switch over, it waited for my input.
When I get 'the issue', it just switches over to the other call without my permission and it terminates the first call.
I'm wondering if this is a fault with my phone, or an issue with the pseudo-roms i have on my phone like Gingerblur, gladiatrix, etc --- or the dialer itself .. shrug
no one else experience this?

Categories

Resources