After changing launcher , my bezels have become larger , making a 3mm outer section of the screen to not work , How do i restore my original screen resolution ?
Related
How can i made a large pic to fit into the screen for wallpaper?
I tried to set some pics as my wallpaper but due to the size of the pic my screen only show parts of the pic instead of making the pics fit to screen.
though having the dimension of the image set to 800x480 is not the perfect size due to portions on top and bottom part are used by the toolbars, it works great.
If I look carefully my display I can notice that display image is not properly centered, infact it has two different black vertical bounds.
I would like to expand image to cover all the display area (like a regulation for lcd displays for example...).
Is it possible??
Cavallipurosangue said:
If I look carefully my display I can notice that display image is not properly centered, infact it has two different black vertical bounds.
I would like to expand image to cover all the display area (like a regulation for lcd displays for example...).
Is it possible??
Click to expand...
Click to collapse
Hi. That's a bit vague - difficult to understand. Can you take a screenshot so we can see what you mean?
Yes I know it is a bit vague, but unfortunately I can't take any screenshot of this, bacause it would show nothing about this problem... I'll had to use an external camera, but at moment the only one I have is the leo's one...
Let me see if I can explain in little words... what I see is that the potential area of display is for example 480x800, but the real display (image on display) is smaller leaving black bounds all around it; it seems projected to a smaller surface, resulting in a smaller display experience (not so much to be honest ).
Given that in all pc monitors you can adjust image position and size to best fit its window, I was asking if it could be possible also on this leo device.
Hope you can better understand now...
If, for example, I open Internet Explorer and wait till the address bar and bottom buttons disappear, I'm left with a mostly white display. There IS a border of about 1mm all the way round this.
Is this what you are talking about?
Yes, it should be! In my case the stripe on the left side is a bit thinner than the one on the right...
Cavallipurosangue said:
Yes, it should be! In my case the stripe on the left side is a bit thinner than the one on the right...
Click to expand...
Click to collapse
That's not an active display area. The display shouldn't go to the very edge, so there's nothing wrong with your phone, and no, you can't expand the display.
Ok, thanks a lot!
I've noticed some faint diagonal stripes on my LG G2 (LG-D802). They make a pixel like pattern of stripes, only they are diagonal from upper left to lower right and mostly visible on solid clear colors like red, green or blue. The stripes are very thin and the width of the stripes is comparable/or slightly smaller then the pixel width of my old Samsung Galaxy S2 (>200PPI). In other words, it's not something I see all of the time but it gets noticeable when you look closely. And as I said it is mostly visible on solid colors, and not on text and other edges where pixels normally is visible (not that I think this is the actual pixels I see). One of the easiest ways to see it is to search after "red" on google images and open a red image, but it is also visible in most apps or on the homescreen.
Is this something anyone else has experienced/noticed, or is it it my display that is faulty?
I'm not allowed to post an outside link in my message (new user), but here is a picture if anybody want's to see.
It was not easy to capture this on camera, but the stripes are barely visible in the red of the Google+ icon and in the dark blue of the image icon. For size comparison; I use Nova Launcher with icon size 70% and the Minimal UI icon pack.
www[dot]dropbox.com/s/68roby6lgh310y0/DiagonalStripesLGG2.jpg
Could it be a problem with your screen protector? If not i recommend sending it in for a check..
Thanks for the reply.
I don't have any screen protector on, but the lines does seem to be fixed to the screen. I.e. if I move an object the lines does not stick to the object but "new" lines gets visible, so it can look like it can be something with the glass.
If nobody else has experienced the lines I will definitively send the phone in for service.
I tried the local phone store, but the guy only laughed at me because he did'nt see it. Great service attitude when you make the customers feel stupid
Maybe you are talking about the touch sensors?
All the phones have it and it's more visible on xperia phones.
Maybe, but I think the lines/pattern is to small and dense to be the normal grid that people see. When I turn the screen off I can (barely) see the the digitzer grid, but it is a completely different pattern (horizontal and vertical lines) and the lines are separated by several line widths (some millimeters maybe?). The diagonal lines I see are very close together. It looks like they are only a line width apart from each other.
One other thing I just noticed is that the lines does not rotate when the screen is in landscape mode. They still go from the front-camera corner down to the corner to the right of the LG logo.
Is it nobody with a good sight that can confirm if they see the stripes or not? Would have helped me a lot when proceeding with getting the phone in for service.
I dropped my phone. Now, one strip of the screen (where the address bar in Chrome is) is no longer responsive to my touch.
I've come up with a workaround: using Nomone resolution changer to lower the screen height to avoid the problematic screen parts.
This is not ideal because the app removes screen size from both the top and the bottom, so I waste valuable screen real estate. Is there any app or any way I can adjust the screen height from only the top and not the bottom? Alternatively, feel free to suggest other workarounds
tongrhj said:
I dropped my phone. Now, one strip of the screen (where the address bar in Chrome is) is no longer responsive to my touch.
I've come up with a workaround: using Nomone resolution changer to lower the screen height to avoid the problematic screen parts.
This is not ideal because the app removes screen size from both the top and the bottom, so I waste valuable screen real estate. Is there any app or any way I can adjust the screen height from only the top and not the bottom? Alternatively, feel free to suggest other workarounds
Click to expand...
Click to collapse
You can change system DPI in build.prop.
Hi there,
I have seen images where there was a background image (or picture ) active with a green border so you could easily align the screenprotector and see if it covers any screen.
Where can I download this image? Can't seem to find it back.
And I think my newly installed screenprotector covers 2mm ps screen on each side.