Please help! Phone can't get past boot animation - Xiaomi Redmi Note 7 Questions & Answers

The phone's just stuck at boot animation. I can get past the 'Redmi' screen but once the boot animation starts, it just goes black even if the battery's charge.
I've tried flashing fastboot rom, but it's still the same. Can't get past the boot animation. My backups didn't help either. It would sometimes get past the boot animation, then after a few hours of use, it will shutdown without warning, same with custom roms (Syberia, Lineage, Pixel Experience, Havoc etc...).
I've read some threads that holding the power button for more than 5 seconds works, but it won't get past boot animation. It loads for a few seconds then the screen goes black.
I've never had any of these issues on my Redmi Note 3. Please help!
Notes:
- I can use Orangefox and Fastboot perfectly without issues. I just can't get past the boot animation.
- Bootloader is unlocked.
- I always Clean flash. After before every rom migration.

Make a backup of it internal sd.
Format system, data, dalvik, cache, vendor (not vendor Image) and the internal.
Reboot in to the recovery.
Flash again orangefox.
Flash last firmware, rom, gapps, maybe a customer kernel (I use morfuz), magisk and reboot in the system.
Wait...
Full charged!

Related

Won't load after flashing

After flashing my phone in Amon RA's recovery the phone will go to the black HTC screen and just stay there. Immediately after flashing I rebooted within recovery and the phone began to reboot, but then shut off. I had to remove the battery to get it to power on again, and it's just stuck at the HTC screen.
Tried to flash boot, recovery, and misc images, but on boot I get no space on device write error. Help?
When you flashed something did you wipe first?
Yes, I wiped, and have wiped the several times I have attempted to do it again.

[help please] Nexus 4 not booting past animation screen

Hi, doing this for a friend whose Nexus 4 was stuck at the boot screen. Tried many things but even now still stuck at the boot screen.
1) unlocked bootloader
2) installed custom recovery (tried both twrp and cwm)
3) tried installing 3-4 different custom ROM's but for each of those, it does not go past the boot screen
What am I doing wrong?
Thanks in advance
Flash a stock rom, including the userdata.img file, which should be the last partition flashed to the phone, boot directly to recovery from fastboot mode, factory wipe, and reboot.

TicWatch E stuck at boot logo after flashing using Mediatek Flasher.

Yesterday I tried to get rid of the ugly green UI on the TicWatch E following https://forum.xda-developers.com/smartwatch/other-smartwatches/ticwatch-e-chinese-version-ticwear-t3781183 . It worked, and my watch looked beautiful. But Bluetooth didn't work correctly. This wasn't a new issue, as the very first day I got the watch, I had the same issue. I tried to reboot, and many other solutions but had to reset like the first time. This time, it booted into TWRP as I had rooted my watch. I proceeded as normal, wiping the user data partition and cache, and rebooting. This time, the watch didn't reboot but went into TWRP instantly. I tried to reboot a couple of times, but ended up in TWRP every time. So I decide to do the most idiotic thing: try to reset again. This time, the watch simply shut off and dint respond to pressing the button. No sound, no vibration, nothing. Thankfully, it showed up in Mediatek flashing tool, so I followed https://forum.xda-developers.com/smartwatch/other-smartwatches/ticwatch-e-chinese-version-ticwear-t3781183 and got it to boot up. I messed up in flashing the userdata.img as well, but I doubt itll have any consequences as I then erased that partition using fast boot. Now, it has been showing the weird circle-throwing-ball animation for the last 4 hours.
For anyone finding this thread, this 7z worked for me
mega.nz/#!tw4hEZyA!xZD7RkSvnuXKcOayeHSvU3DMUat_NGLi0WI3nwIGU1A
Model WF12066
AutismicPootatoe said:
Yesterday I tried to ...
Click to expand...
Click to collapse
drive.google.com/open?id=1cLp_ALZhG-xdqd3fSj5xD7xj5UWfz95p
To explain more, that previous link was for android 5. It got the watch up and booting again. I found an Android 7 ROM on XDA, spliced in the img files and that booted too. Managed to get into TWRP and load my backups. Rerooted and enabled the black menus.
Above is a dump from my ticwatch e after all is said and done (except for userdata, that's still from the same link from above). The recovery is TWRP, system and boot are my restores from TWRP (running oreo), oem is preserved (to keep my oem.prop changes). The rest of the img files are from that mega link above (filename TicwearToAndroidWear.7z). Note: I haven't tested it, but if my SP Flash reading skills need some work, you should be able to replicate my steps ( download TicwearToAndroidWear.7z, replace recovery with TWRP, splice in the boot, system, userdata from forum.xda-developers.com/smartwatch/other-smartwatches/rom-kernel-t3786600, then find a TWRP backup to restore from. I can probably provide my boot and system WIN files if my img files don't work.

A205YN not booting custom ROM after flash through TWRP

It seems every ROM I’ve tried installing never boot after “successfully” through TWRP. (Like even 10 mins of waiting)
My idea is that unlocking the bootloader (where it gives you warnings every time the thing boots) has something to do with it, seeing as the flashing guides don‘t mention this in depth.
Factory reset through TWRP after flash, that wipe after flashing that has the button on the finished page
Now it can’t boot into TWRP, or download mode, just stuck between the power screen and black (seemingly turned off)
Did you flash Magisk-v23.0.apk through TWRP?
burningcreation said:
Did you flash Magisk-v23.0.apk through TWRP?
Click to expand...
Click to collapse
No, I was following this and this which don’t list Magisk as a step
Would that have been important to do?
Also any ideas on how to get it to download mode? So far it just gets stuck on the Galaxy A20 screen with a warning about it being unlocked, no button combo gets past that, even though it does reboot

Recovery bootloop

Hi,
i have an issue with my phone constantly rebooting to the recovery.
I have TWRP installed and tried various things (factory reset, full wipe) with restoring partial previous backup or re-installing lineage 17 but could't fix the issue.
At best it passes MI logo and load lineage boot animation then suddenly reboot to TWRP or sometimes doesn't even load the lineage animation (twice MI logo then TWRP).
I need help identifying and fixing the issue please.
Thanks
Go to fastboot, flash twrp with adb, boot to twrp and format data, reboot twrp, factory reset, flash only Lineage.
Or flash stock MIUI, and from MIUI go all yhe way back to Lineage

Categories

Resources