Related
in short: i need the mojo`s stock android rom in a form wich i can flash with twrp!
Hey Guys,
i am new here. i can t undersund why i can t directly write this thread in the mojo dev section where it belongs: http://forum.xda-developers.com/mad-catz-mojo/development
it says i have not enough rights for that - not understundable for me.
to the case:
already from the beginning i had the mojo, i worried becouse there were no recovery system like romanger or twrp available. i worried, if i make me the whole work, with installing configuring apps and system and an error occured, that i will have no posibility to play a working backup back and exact like that, it was comming:
suddenly sixaxis app wasn t working anymore and gave me the error-message: couldn t load hcl-library-something.
i deletet data and cache of this app, deinstalled, reinstalled, still the same proplem. so my worst nightmares came true.
now i had the choice to set the system to factory defaults (not sure if with this the spoken error were fixed) and lose everything and make the whole work again, or forget it and put the mojo to ebay or to look if in the meanwhile a recovery system is available so that i would have the whole work again, but then, through the posibility of recovery i am on the safe side.
so i decide it and i found out that now a twrp was available and and a unoffical cm12 rom:
[ROM][UNOFFICIAL][mojo] CyanogenMod 12 Mad Catz M.O.J.O: http://forum.xda-developers.com/mad.../rom-cyanogenmod-12-mad-catz-m-o-j-o-t2976401
let me say, that i am not a linuxfreak or a nerd. i see me as an enduser. i want to use things only, i don t have the time, nerves and even the intention to be more.
explanation: if you want for example fly to anywhere, you must not know how exact a plain is working, becouse you only want to use it.
so you buy an ticket jump into the plain and thats it.
i say that through i am no expert, i managed to install twrp and i managed to flash the custom rom.
then the problems began. after flashing it seems that i have no root. so i must research an half day to find out that you must hit seven times dev options to give the root setting free. i don t understund why people do this and don t give this information clear out. if anyone is able to install an costum rom, then you must not save him, with trying to hide the posiblity of root! this makes no sense for me.
my problem actual is that i need the stock rom, becouse the only thing i ever wantet was a working recovery system and this i have now.
i only installed the cm12 rom, becouse there was no stock rom, so i have had no choice.
I hope anyone can provide me the orginal mojo stock rom that i can flash it with twrp.
so if possible, please help me.
best regards
p.s.: forgive me my bad english wich isn t my foreign language. my german is much better
[email protected] said:
in short: i need the mojo`s stock android rom in a form wich i can flash with twrp!
Hey Guys,
i am new here. i can t undersund why i can t directly write this thread in the mojo dev section where it belongs: http://forum.xda-developers.com/mad-catz-mojo/development
it says i have not enough rights for that - not understundable for me.
to the case:
already from the beginning i had the mojo, i worried becouse there were no recovery system like romanger or twrp available. i worried, if i make me the whole work, with installing configuring apps and system and an error occured, that i will have no posibility to play a working backup back and exact like that, it was comming:
suddenly sixaxis app wasn t working anymore and gave me the error-message: couldn t load hcl-library-something.
i deletet data and cache of this app, deinstalled, reinstalled, still the same proplem. so my worst nightmares came true.
now i had the choice to set the system to factory defaults (not sure if with this the spoken error were fixed) and lose everything and make the whole work again, or forget it and put the mojo to ebay or to look if in the meanwhile a recovery system is available so that i would have the whole work again, but then, through the posibility of recovery i am on the safe side.
so i decide it and i found out that now a twrp was available and and a unoffical cm12 rom:
[ROM][UNOFFICIAL][mojo] CyanogenMod 12 Mad Catz M.O.J.O: http://forum.xda-developers.com/mad.../rom-cyanogenmod-12-mad-catz-m-o-j-o-t2976401
let me say, that i am not a linuxfreak or a nerd. i see me as an enduser. i want to use things only, i don t have the time, nerves and even the intention to be more.
explanation: if you want for example fly to anywhere, you must not know how exact a plain is working, becouse you only want to use it.
so you buy an ticket jump into the plain and thats it.
i say that through i am no expert, i managed to install twrp and i managed to flash the custom rom.
then the problems began. after flashing it seems that i have no root. so i must research an half day to find out that you must hit seven times dev options to give the root setting free. i don t understund why people do this and don t give this information clear out. if anyone is able to install an costum rom, then you must not save him, with trying to hide the posiblity of root! this makes no sense for me.
my problem actual is that i need the stock rom, becouse the only thing i ever wantet was a working recovery system and this i have now.
i only installed the cm12 rom, becouse there was no stock rom, so i have had no choice.
I hope anyone can provide me the orginal mojo stock rom that i can flash it with twrp.
so if possible, please help me.
best regards
p.s.: forgive me my bad english wich isn t my foreign language. my german is much better
Click to expand...
Click to collapse
try:
ftp://86.54.116.234/pub/software/mojo/
Not sure if it's flashable
gwaldo said:
try:
Not sure if it's flashable
Click to expand...
Click to collapse
i am also not sure if its flashable and i don t want destroy my mojo.
you are the first one, since i startet this threat, who are concern and tried to help.
thank you!
greetings
[email protected] said:
i am also not sure if its flashable and i don t want destroy my mojo.
you are the first one, since i startet this threat, who are concern and tried to help.
thank you!
greetings
Click to expand...
Click to collapse
Hi,
I'm not an andriod expert , and i too have no interest in trashing my mojo.
maybe ask on the dev forum for cm12 thread.
I'm 75% sure it will work :-\
gwaldo said:
Hi,
I'm not an andriod expert , and i too have no interest in trashing my mojo.
maybe ask on the dev forum for cm12 thread.
I'm 75% sure it will work :-\
Click to expand...
Click to collapse
i tried to write there:
i am new here. i can t undersund why i can t directly write this thread in the mojo dev section where it belongs: http://forum.xda-developers.com/mad-...jo/development
it says i have not enough rights for that - not understundable for me.
Click to expand...
Click to collapse
, but its not possible for me and it looks my thread get not moved to the correct section.
maybe someone with an stock mojo can install twrp:
[RECOVERY][mojo] TWRP 2.8.2.0 recovery Mad Catz M.O.J.O. :http://forum.xda-developers.com/mad...overy-twrp-2-8-2-0-recovery-mad-catz-t2973640
make a bakcup of his system with it and give me the rom.
i think this should work.
[email protected] said:
i tried to write there:
, but its not possible for me and it looks my thread get not moved to the correct section.
maybe someone with an stock mojo can install twrp:
[RECOVERY][mojo] TWRP 2.8.2.0 recovery Mad Catz M.O.J.O. :http://forum.xda-developers.com/mad...overy-twrp-2-8-2-0-recovery-mad-catz-t2973640
make a bakcup of his system with it and give me the rom.
i think this should work.
Click to expand...
Click to collapse
You can ask in the cm12 thread
gwaldo said:
You can ask in the cm12 thread
Click to expand...
Click to collapse
thank you! did so.
[email protected] said:
thank you! did so.
Click to expand...
Click to collapse
It's flashable just flash the zip and your back on stock.
Unjustified Dev said:
It's flashable just flash the zip and your back on stock.
Click to expand...
Click to collapse
thats sounds great. thanks!
can you please say me wich file exactly i need from the link?
there are several .zip files
[email protected] said:
thats sounds great. thanks!
can you please say me wich file exactly i need from the link?
there are several .zip files
Click to expand...
Click to collapse
I use MO0205-TS
Unjustified Dev said:
I use MO0205-TS
Click to expand...
Click to collapse
thank you very much! then my problem should to solved.
you also seem to be responsible for the MOJOs twrp-port. also thank you for that!
i was waiting for such an recovery system since i bought the mojo.
now i can work without beeing afraid to have no backup for the worst case.
nice work!
greetings
Unjustified Dev said:
It's flashable just flash the zip and your back on stock.
Click to expand...
Click to collapse
Unable to flash on my end. It's there an update to this?
paulie_gogetit said:
Unable to flash on my end. It's there an update to this?
Click to expand...
Click to collapse
Flash, the remix OS rom first and then flash this rom. It has to do with the partition structure. i was also unable to flash the stock rom after having CM12 on my mojo, but I first flashed remix OS and then was able to flash the stock rom.
I'm now running the stock rom happily and will not go back to any custom roms. The bottom line is that there is just one dev doing custom rom work and while I appreciate his work, It just doesn't seem like any of the custom roms are there yet in regards to stability.
Is there a keyboard sequence to get into recovery? I have bricked my MOJO because I failed to realize that it failed to flash the stock firmware after I wiped it.
(EDIT) I found a solution to the above!
Okay so the method I used to get into recovery is to use the MoDaCo root tool and edit the superboot-windows.bat file and change boot.superboot.img
to twrp-2.8.7.0-mojo.img. Of course you have to have the TWRP image as well to do this. This got me into TWRP, but the following issue still stands.
Okay, I can't seem to get Remix OS or the factory rom to install, CM12 installs fine though, anyone know how to fix this?
Side note:
I have a TWRP backup of my other MOJO but TWRP doesn't see anything when I choose restore, and I have tried choosing internal and SD card for the source to no avail, does anyone know how to get around that? Or is this just a current issue with this version of TWRP on the MOJO?
Please help need mojo stock rom
Hello all some reason my stock rom didn't back up and I've lost it please if anyone can help I need the stock rom for madcatz mojo thank you
konser13 said:
Hello all some reason my stock rom didn't back up and I've lost it please if anyone can help I need the stock rom for madcatz mojo thank you
Click to expand...
Click to collapse
Me too
Sent from my LG-H815 using Tapatalk
Their is a way to get it back to stock
To 1eyedmonster I had left information but I will explain how to do this if you can use ( Firefox internet browser ) you can download the stock frameware from madcatz site where you can find stock 4.2.2 for the m.o.j.o. link to original thread http://forum.xda-developers.com/mad...refox-to-download-madcatz-mojo-4-2-2-t3431587
imseanross1 said:
Is there a keyboard sequence to get into recovery? I have bricked my MOJO because I failed to realize that it failed to flash the stock firmware after I wiped it.
(EDIT) I found a solution to the above!
Okay so the method I used to get into recovery is to use the MoDaCo root tool and edit the superboot-windows.bat file and change boot.superboot.img
to twrp-2.8.7.0-mojo.img. Of course you have to have the TWRP image as well to do this. This got me into TWRP, but the following issue still stands.
Okay, I can't seem to get Remix OS or the factory rom to install, CM12 installs fine though, anyone know how to fix this?
Side note:
I have a TWRP backup of my other MOJO but TWRP doesn't see anything when I choose restore, and I have tried choosing internal and SD card for the source to no avail, does anyone know how to get around that? Or is this just a current issue with this version of TWRP on the MOJO?
Click to expand...
Click to collapse
If you still have issues entering recovery install terminal emulator from play store
Make sure usb debugging enabled in developer options
Then open terminal emulator and enter following commmnds you will need a keyboard for this Then follow these steps
Adb devices (enter)
Adb reboot recovery (enter)
Then you should be in twrp
Hello, thank you very much for reading, I hope you can help me. I need one or more files to be able to recover my phone: Samsung Galaxy S7 Active.
These are the files that I need:
prog_emmc_firehose_8996.mbn (.elf)
rawprogram0.xml
patch0.xml
I do not know if I would also need these:
MPRG8996.hex
rawprogram_unsparse.xml
I think these files are the same as prog_emmc_firehose_8996.mbn (.elf):
8996_msimage.mbn
MSM8996.mbn
How did I make a brick my phone? Installing the first official version:
SM-G891A_G891AUCU1APG7_ATT_Full_Repair_Frimware
Previously I used this version without any problem:
G891AUCS2API2_CL8737252_QB10881022_REV02_user_low_ship_MULTI_CERT
I wish someone could help me, I have read more than 50 pages, but I have not been able to solve the problem.
Please.
Can anybody help me?
hey.... i'm on the same situation..
i need zuk Z2 pro/ prog_ufs_firehose_8996_ddr_zuk.mbn but i only have elf....
it's to remove this stupid frp lock from someone who forgot his first mail... :/
keep going we are going to find out the solution
yakine13 said:
hey.... i'm on the same situation..
i need zuk Z2 pro/ prog_ufs_firehose_8996_ddr_zuk.mbn but i only have elf....
it's to remove this stupid frp lock from someone who forgot his first mail... :/
keep going we are going to find out the solution
Click to expand...
Click to collapse
I hope someone helps us.
HEY!
I found a way!!!
...for me:/
why you want this emmc_firehose_8996.mbn?
actually, i think that you don't need that file especially, it doesn't exist from where i've searched.
if it's to flash your phone all you need is odin and a flashable file of your phone firmware
i had a zuk z2 pro and was locked with frp when i wanted to setup custom rom AOSP 9.0.0 for example.
but i managed to unlock it by flashing a custom rom without gapps in the first place to no get locked out.
tell me how your phone is reacting, what do you have access to, and your initial step before brick
yakine13 said:
hey.... i'm on the same situation..
i need zuk Z2 pro/ prog_ufs_firehose_8996_ddr_zuk.mbn but i only have elf....
it's to remove this stupid frp lock from someone who forgot his first mail... :/
keep going we are going to find out the solution
Click to expand...
Click to collapse
yakine13 said:
HEY!
I found a way!!!
...for me:/
why you want this emmc_firehose_8996.mbn?
actually, i think that you don't need that file especially, it doesn't exist from where i've searched.
if it's to flash your phone all you need is odin and a flashable file of your phone firmware
i had a zuk z2 pro and was locked with frp when i wanted to setup custom rom AOSP 9.0.0 for example.
but i managed to unlock it by flashing a custom rom without gapps in the first place to no get locked out.
tell me how your phone is reacting, what do you have access to, and your initial step before brick
Click to expand...
Click to collapse
Hello, sorry for my bad English. My phone is a Samsung Galaxy S7 Active (SM-G891A). I will try to explain what happened.
I had this version of Android 6 installed (via Odin) on the phone:
G891AUCS2API2_CL8737252_QB10881022_REV02_user_low_ship_MULTI_CERT
With that version my phone was fine, but then I tried to install the first version of Android 6 (official) via Odin:
SM-G891A_G891AUCU1APG7_ATT_Full_Repair_Frimware
When the installation was completed (Odin said the installation was successful), the phone never restarted. There is no way to turn it on with any combination of buttons, nor with a microSD with a debrick.img. A USB JIG has not worked for me either.
Windows detects my phone in Qualcomm 9008 mode. Odin does not detect it.
did you find a solution?
actually it look like to be a hard brick but as it's snapdragon 820 you can recover from it
I'm waiting for the day when noobs and half-noobs (no offense, all of us have been there) will start reading before writing and stop assuming that their 1st aid kit will revive a kitten ran over by a train.
It's okay not to know, but before writing a spam reply, just consider for a second that the user already tried your solution and is already a step ahead.
Listen guy, go to Halab Tech. They have certain firmwares for what you need, but they ask money.
Those type of firmwares have a prefix "DEBUG_EMERGENCY_DOWNLOAD_FA....'
In my case it's "DEBUG_EMERGENCY_DOWNLOAD_FA70_G955U1SQU6ASG1_CL12542406_QB24669289_REV00_user_mid_noship_MULTI_CERT.tgz"
As I consider that a bastard move (since they are selling Samsung's intellectual property as their own, stuff that should be public in the first place), I encourage you to share the files if you buy them, so that we can all use them and screw over these monopoly playing-intellectual property stealing bastards.
I'm now working on a recovery of my G955U1 (S8+ Qualcomm USA). I paid $25 for a god damn firmware and I'm gonna post it in next couple of days.
I'm personally having trouble of flashing the firmware (because not many flash tools support flashing .elf flash loaders), but I used one FRP tool (Octoplus FRP tool) to check the loader and it managed to send it, receive the "hello" packet, read partitions and erase the FRP partition (I assume it worked by the log), but I don't have a way to flash other partitions yet.
You people should have in mind one thing: even though certain devices have the same chipset, doesn't mean that you can use the same firehose flash loader, since manufacturers create different loaders for them and write their digital signatures into the chip (don't know is it hardwired or flashed), meaning that you cannot use Xiaomi's prog_ufs_firehose_8998_ddr.elf (just an example) to flash a Samsung device with MSM8992 chipset.
In fact, I think that each phone model and possibly even it's different firmware revisions have unique loaders, since I didn't manage to get a successful response from my G955U1 by sending G955U2 loader, and the loader which I managed to send is actually stated to be for G955U1U6 (U6 is the bootloader revision number, while U1 is the part of the model number).
Best of luck, contact me if you need help.
I want to install TWRP as my recovery I've tried at least four different versions that are listed here and a few others from other links:
https://forum.xda-developers.com/t/...p-for-oneplus-8-8-pro-unified-stable.4101313/
I'm not having driver issues anymore so I'm working with adb and fastboot fine. All commands are going through fine and I've tried flashing to recovery_a and recovery_b. Factory resetting doesn't resolve the issue. Every walkthrough I find I get to says flash then boot to TWRP but every time I flash it qualcomm dumps and every time I boot to it it qualcomm dumps.
Is there something corrupted in my recovery I need to wipe somehow? If so how do I wipe it because the only command I found online that would run was fastboot -w and that didn't fix the issue either.
Honestly really annoying at this. This is my 4th OnePlus phone and I've never had so many issues flashing it.
Edit:
I have also tried to do whatever steps are needed to go back to base stock and OS and it doesn't seem to work either. Any help would be appreciated.
Edit 2:
I did it. For anyone who finds this thread in the future the MSM tool did finally work. This is the video I used in the end
(I muted it.) and the first few starts it failed. I went into the properties of the MSM exe and under compatibility checked ran as admin. I also did install the qualcomm driver at some point way before this so not sure if that helped. The MSM tool still didn't work until I started it, turned my phone off, held both volume buttons (not the power) while plugging the phone in. All the stuff online I saw had people starting the program at this point but mine had started already and was in a "waiting for device" state when it worked.
What a lifesaver. Won't be messing around with this again until TWRP is available.
Because you are unable to flash phone's Stock ROM take phone to authorized service center and let them fix it.
Flash stock recovery. TWRP is but compatible with OOS11 for 8/Pro.
Edit: not
Lossyx said:
Flash stock recovery. TWRP is but compatible with OOS11 for 8/Pro.
Click to expand...
Click to collapse
I have had so much trouble figuring that out too. Do you have a good link for that? I can't find an easy way to do it. I've seen people recommend the msmdownloadtool but every time I use it it doesn't pick up my phone.
I've settled with Lineage OS and Gapps until I figure out more.
TheFloppyDisk said:
I have had so much trouble figuring that out too. Do you have a good link for that? I can't find an easy way to do it. I've seen people recommend the msmdownloadtool but every time I use it it doesn't pick up my phone.
I've settled with Lineage OS and Gapps until I figure out more.
Click to expand...
Click to collapse
Meant to say it's **not** compatible with Android 11 yet.
Lossyx said:
Meant to say it's **not** compatible with Android 11 yet.
Click to expand...
Click to collapse
Sorry if I wasn't clear either. I was wondering if you have a good resource for flashing the stock again. I haven't been able to myself.
TheFloppyDisk said:
Sorry if I wasn't clear either. I was wondering if you have a good resource for flashing the stock again. I haven't been able to myself.
Click to expand...
Click to collapse
The same way to flashed TWRP.
fastboot flash recovery recovery_a and _b.
In the future, you should not flash both slots, just flash without specifying _a or _b.
Recovery image can be obtained here;
Android Dumps / oneplus / oneplus8pro · GitLab
GitLab Enterprise Edition
dumps.tadiphone.dev
Although i am not sure which OOS version you use, so you might have to change branch
Lossyx said:
The same way to flashed TWRP.
fastboot flash recovery recovery_a and _b.
In the future, you should not flash both slots, just flash without specifying _a or _b.
Recovery image can be obtained here;
Android Dumps / oneplus / oneplus8pro · GitLab
GitLab Enterprise Edition
dumps.tadiphone.dev
Although i am not sure which OOS version you use, so you might have to change branch
Click to expand...
Click to collapse
I hate to be this much of a noob about it but I see a recovery file listed in the link you sent. Is that the recovery I flash? And if so after flashing is this branch also a stock rom? I've been trying for a while now just to get back to the basic oxygen that comes with the phone but it's been a nightmare for me and it feels like no resource I find fully explains it.
TheFloppyDisk said:
I hate to be this much of a noob about it but I see a recovery file listed in the link you sent. Is that the recovery I flash? And if so after flashing is this branch also a stock rom? I've been trying for a while now just to get back to the basic oxygen that comes with the phone but it's been a nightmare for me and it feels like no resource I find fully explains it.
Click to expand...
Click to collapse
If you want OOS back / new start, best way is really to use MSM. Haven't really used it, so can't help you much. There are tutorials online / YouTube though
Lossyx said:
If you want OOS back / new start, best way is really to use MSM. Haven't really used it, so can't help you much. There are tutorials online / YouTube though
Click to expand...
Click to collapse
Gotcha. Unfortunately I haven't been able to get MSM to recognize my phone yet but I guess I will keep working on it and see what I can do. Thanks for your help.
TheFloppyDisk said:
Gotcha. Unfortunately I haven't been able to get MSM to recognize my phone yet but I guess I will keep working on it and see what I can do. Thanks for your help.
Click to expand...
Click to collapse
It is very sensitive to which USB port you use. For some people only USB2.0 works, for me USB3 works fine as long as it's chipset USB3. The second ASMedia controller doesn't work.
Also, use original cable, and switch off the phone completely, get MSM to the point it's waiting for device so start the download before connecting phone, then while holding the volume keys connect the USB cable and it should instantly start flashing.
Hello everyone, that's it. I have a Redmi 2 enhanced version (2014811) . It can be turned on now but it keeps restarting as soon as it enters the first page. Now it can enter the fastboot mode. How can I save it? (The phone should not be rooted before)
Postscript: If possible, can I take this opportunity to use a third party ROM to upgrade to a higher version of Android? (e.g. Android 10 or higher）
Thank you for your comments, thank you very much ! ! !
Deleted.
LR7875 said:
If you know how to use fastboot, try installing TWRP. (Execute command fastboot flash recovery twrp.xxx.img where twrp.xxx.img is the filename of twrp placed into the fastboot folder on your computer. If you don't understand ask me further.)
Wingtech Redmi 2
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Then wipe> factory reset in twrp
Then flash this rom
[ROM][11.0][UNOFFICIAL][wt88047x] LineageOS 18.1
Important information: This thread is for LineageOS 18.1 opensource builds for Wingtech WT88047, marketed as Redmi 2 by Xiaomi. The following will not be supported in this thread: Custom Kernels Mods Modified system files Xposed Magisk What's...
forum.xda-developers.com
Click to expand...
Click to collapse
First of all, thank you very much for your advices, bro! Do I need to unlock/root first before installing TWRP? Because I have not been rooted it before, can I just flash in TWRP directly under the fastboot environment without rooting? Sorry, I still don't know how to do it, maybe some concepts have not been figured out yet. .....
If the phone is stock and not rooted a factory reset should restore it.
You will lose all data.
It may be possible to start it and get it to run stabily in Safe mode, if so it's a 3rd party startup app causing it. Find it...
blackhawk said:
If the phone is stock and not rooted a factory reset should restore it.
You will lose all data.
It may be possible to start it and get it to run stabily in Safe mode, if so it's a 3rd party startup app causing it. Find it...
Click to expand...
Click to collapse
I'm afraid that during the entire flashing process, some things have been done wrong and cannot be remedied in the future. Are there any basic tutorials on flashing that I can learn?
Sorry, sent the wrong post. Try factory resetting in miui recovery mode. If it still not boots, your phone is permanently fried on the motherboard level.
2021redmi2fans said:
I'm afraid that during the entire flashing process, some things have been done wrong and cannot be remedied in the future. Are there any basic tutorials on flashing that I can learn?
Click to expand...
Click to collapse
I apologize that no, you will need to get into system and sign into your mi account in order to unlock the bootloader and allow you to flash anything, which you cannot do as for now.
LR7875 said:
I apologize that no, you will need to get into system and sign into your mi account in order to unlock the bootloader and allow you to flash anything, which you cannot do as for now.
Click to expand...
Click to collapse
He should be able to reflash the stock rom though, right?
LR7875 said:
Sorry, sent the wrong post. Try factory resetting in miui recovery mode. If it still not boots, your phone is permanently fried on the motherboard level.
Click to expand...
Click to collapse
It doesn’t matter, the problem is that I don’t know how to enter the miui recovery mode......
2021redmi2fans said:
It doesn’t matter, the problem is that I don’t know how to enter the miui recovery mode......
Click to expand...
Click to collapse
Whatever button sequence is used for that device.
Timing is everything, keep trying until you get it.
It's harder to do when you really need to
Take a break and make sure you got the right sequence/timing.
If it's booting up to the Home page it's salvageable I think... better than a boot loop.
However, before the loop occurs, Mokee 7.1.2 was installed and used it normally for a period of time, does that matter?
blackhawk said:
Whatever button sequence is used for that device.
Timing is everything, keep trying until you get it.
It's harder to do when you really need to
Take a break and make sure you got the right sequence/timing.
If it's booting up to the Home page it's salvageable I think... better than a boot loop.
Click to expand...
Click to collapse
Bro really thank you
2021redmi2fans said:
Bro really thank you
Click to expand...
Click to collapse
Stock Androids are easy, that's one reason I run stock. The only thing that really kills them is an outright hardware failure.
blackhawk said:
Stock Androids are easy, that's one reason I run stock. The only thing that really kills them is an outright hardware failure.
Click to expand...
Click to collapse
redmi 2 runs on stock rom android 4.2 right? you can not install any single app on that.
when the op fixed it it is advised to install a custom rom.
I bought this phone in large part due to the EDL flashing tool which OnePlus decided to lock down and start charging money for. So I'm pretty bummed to see a landscape without much activity or support from various well known projects like TWRP and Lineage. Is there any recovery out there on par with TWRP that works right now whose GitHub repo hasn't been deleted?
Custom recvoerys like TWRP dont play a big role anymore. At least i did not need one on my last 3 devices. OnePlus 8 Pro, Nothing Phone 1, Pixel 7 Pro. All have custom roms and everything is fine.
The only thing i am missing is NandroidBackup but without sdcard sot Nandroid is not really useful anyway.
Short answer: No we have no custom recovery but we dont need one.
Ia there anything working with this Nothing phone
Nandroid backup saved me so many times...
I would like so much TWRP
xtcislove said:
Short answer: No we have no custom recovery but we dont need one.
Click to expand...
Click to collapse
For me, that's not true.
I have a couple of cases that the TWRP can solve.
- delete some apps in the super partition.
- use scripts from @osm0sis to deactivate force encryption and make super partition writable again
- nandroid backup
- delete magisk modules if they make problems or bootloops
- and much more that I have forgotten
I'm not an expert, but I loved to flash ROM (before my NP!)
Now I'm with 1.5.3 with a big fear to brick my NP1 to jump on a Custom ROM
Every Custom ROM has a particular instruction to flash it, XDA is no more the basic area where the threat are updated, now is Telegram where are all the info
But these "info" are not simple and explained step by step...
TWRP would have been a safe port for me (us? @dreas74 )
... I have no such scripts.
osm0sis said:
... I have no such scripts.
Click to expand...
Click to collapse
I may have mistaken the author.
In any case, the works are inspired by you.
example:
[Deprecated] Universal DM-Verity, ForceEncrypt, Disk Quota Disabler [11/2/2020]
Hi all! For the past couple of months, I've been looking into making a more universal solution to disable dm-verity and forceencrypt. Needing to take different zips, modify them for different devices, and then cross your fingers when you switch...
forum.xda-developers.com
xtcislove said:
Custom recvoerys like TWRP dont play a big role anymore. At least i did not need one on my last 3 devices. OnePlus 8 Pro, Nothing Phone 1, Pixel 7 Pro. All have custom roms and everything is fine.
The only thing i am missing is NandroidBackup but without sdcard sot Nandroid is not really useful anyway.
Short answer: No we have no custom recovery but we dont need one.
Click to expand...
Click to collapse
I think the problem for the most users is they can't handle adb and fastboot and that's why they want a recovery. I haven't used any recovery since OnePlus 8 series and i never missed it.
P6P said:
I think the problem for the most users is they can't handle adb and fastboot and that's why they want a recovery. I haven't used any recovery since OnePlus 8 series and i never missed it.
Click to expand...
Click to collapse
Then put us in the entire light of the platform tools gods.
How can I disable encryption of the data partition and how can I delete youtube parts in the system partition with ADB or fastboot?
P6P said:
I think the problem for the most users is they can't handle adb and fastboot and that's why they want a recovery. I haven't used any recovery since OnePlus 8 series and i never missed it.
Click to expand...
Click to collapse
I use ADB and fastboot all the time, but it would be nice to regain the ability to do things without being tethered to a laptop.
Heard somewhere (Telegram group) that TWRP is coming soon.
solomon.rajan said:
Heard somewhere (Telegram group) that TWRP is coming soon.
Click to expand...
Click to collapse
How can I join this group?
solomon.rajan said:
Heard somewhere (Telegram group) that TWRP is coming soon.
Click to expand...
Click to collapse
I've been reading this almost since the release of NP1.
[Unofficial] [12.1] OrangeFox Recovery (spacewar) (Experimental)
OrangeFox Recovery ℹ️ Information Status: Experimental Version: 12.1 Release Date: 2022-08-23 Source Code: View Source on GitHub! ⬇️Download: Latest Version Download 📲 Installation on Nothing Phone 1: - Download the latest OrangeFox build from...
forum.xda-developers.com