Database Users

Avin Android -----need a big help -----

Good morning, I'm MARCO from Milan Italy. I hope that someone can help me
I have got an Avin unit Avant 2 for BMW E46 purchased on january 2015 with Android 4.4.1 and last firmware release
After two years of perfect run now I have a big problem. I want to make a short summary of avin e46 isuues. (sorry for my bad english)
On the 2th January 2017 in the afternoon I start my car from a park and avin unit run without problem;
After 10 min of travel with navi on, unit stop to run screen become black and when I restart the car or the unit avin logo was showed for a few second and after disappear:
On the 3th January 2017 when I start my car in the mornng unit was run regular but during the day i park my car and when i restart I've got the same issue of day before. So I try to make a soft reset but nothing run (
On the 4th january 2017 I hope then unit start after the night but when I start my car in the morning nothing run. Avin logo appears NOW for less than a second and anything run.
So I wrote an email to Avin support and after I try to:
- check wires and check battery (wires ok battery is a brand new exide plus)
- made reset factory whit power button (8 shot + 1 15 sec as you suggest) result RESET FACTORY DON'T START
- update with sd card in navi slot and reset hole with your software update result UPDATE DON'T START
- remove unit from the car and power in with a 12v dc external power source result SAME ISSUE THAN MOUNTED IN CAR
All thing that I do give me the same response: nothing.... run and avin logo for less then a second (power is ok because red light is on, cd run ecc ecc)
Please someone can help me because buying this quality unit was very expensive I have preferred it for a cinese unit but I need that it works fine. Thank you Marco

When my Avin Avant 2 was bricked i used this link with the malaysk rom.
https://forum.xda-developers.com/showpost.php?p=67184851&postcount=50
Create the sd card with malaysk rom. Put in the sd in the gps slot and set the car to acc. This should start the update. At least thats what happend to my Avin Avant.

THANK YOU my unit think does not boot. Avin logo appears for less than a second

what kind of rom did you choose for Avin Avant 2? Thank you very much Marco

Unit bricked from begining - how to identify

Hello,
I recived android unit for BMW E46. The problem is unit is bricked from the begining so i dont know what is my MCU.
Unit is dead, Black screen and buttons,zero reaction .
On MCU supply I measured 3.30v and on SOM power supply pin i have 0, so I think problem is with my MCU.
I know that unit is based on PX3 with 2GB RAM and 16 GB memory android 7.1

Thought about returning it?

I recived it for free

Potencial in old Xtrons head unit for Audi ?

Hello everyone!
I dont have a lot of experience with android, but would love if someone would take a bit of time to explain if I can get a better performance out of my old head unit.
I have an old Xtrons for audi tt, with android 4.2.2 on it ( I can take a "about device picture if needed ). It is a bit slow right after boot up, but after that runs fine, just a bit slow.
Would it benefit from updating to newer android, and how should I do it? thanks!!
Best regards,

CCC 12.3" Android Problems

Hello,
I have recently purchased a 12.3 android unit and got round to installing it the other day.
Everything works on the unit the only problem I seem to be having is a timed cut off on the android unit of the old ccc.
The ccc menu will only power on the android side when the old power plug is connected to the old screen. I can remove the power from the old screen and it will still run on the android side for a short amount of time before doing the same. I have to connect the old power plug back to old screen for it to load up on the android side.
Any help would be much appreciated

Is it an MTCD device?

marchnz said:
Is it an MTCD device?
Click to expand...
Click to collapse
All I know is that apparently it is a 8gb ram model with the MTK P60 processor

GrizzlyE70 said:
All I know is that apparently it is a 8gb ram model with the MTK P60 processor
Click to expand...
Click to collapse

It's not an MTCD device, you might get better exposure in the android head units forum.
I've requested a moderator moves this post to Android Head-units forum.

Alps Q92 head unit

Device Alps Q92 long story short, fake Android version and fake ram as per Fake Device Test. Device won't open CPU-Z. It will download but when attempting to open it shuts down/closes down. I would like to upgrade the unit but i can't seem to find it in XYAuto. Can someone guide me to where i might be able to upgrade this unit. Please see attached.

Anyone?