Good evening I have a problem in my phone I get a message "that the system has been destroyed" because I tried to root, for information the method of pressing the power button and the down button does not work. I do not know now how to solve the problem. Please help me. Thank you leurs:leurs:leurs:
lyes987 said:
Good evening I have a problem in my phone I get a message "that the system has been destroyed" because I tried to root, for information the method of pressing the power button and the down button does not work. I do not know now how to solve the problem. Please help me. Thank you leurs:leurs:leurs:
Click to expand...
Click to collapse
Try dirty-flashing your ROM.
Related
Hello EveryBody,
I have a problem with my SGN3! I've just flash with a new rom and now I can't boot in recovery and my phone don't boot and I see a Yellow Triangle.... with the message " Custom binary blocked by reactivation lock"
SECURE FAIL : RECOVERY
Anybody can help me ?
My phone is dead?
deauegi rate
Try to press volume up in the download mode. This should boot and allow you to deactivate reactivation lock.
Ok I'm on download mode. What I supposed to do now?
what he said: press volume up button
then, go to settings and deactivate that reactivation lock
SuicideFlasher said:
what he said: press volume up button
then, go to settings and deactivate that reactivation lock
Click to expand...
Click to collapse
I'm in ODIN mode now. That's the only availaible mode And Volume UP do nothing.
Before that I have a choice to continue with Volume UP and Down to boot but if I do button down , same error message.
Kinoal said:
I'm in ODIN mode now. That's the only availaible mode And Volume UP do nothing.
Before that I have a choice to continue with Volume UP and Down to boot but if I do button down , same error message.
Click to expand...
Click to collapse
sorry then :/ can't help, i'm not a samsung user yet, so i know nothing about ODIN and stuff
try searching for some way to bypass it
oh wow... you flashed rom without reading instructions? all rom installations say ensure activation lock is unticked :/
I know what it feels like to brick a phone, however you are yet to experience a hard brick
good luck hope someone can help you out man
Every time I think about flashing custom room I read post which puts me off. Another dude failed to follow instructions, I feel for you. Hope you find solution keep us updated.
Kinoal said:
I'm in ODIN mode now. That's the only availaible mode And Volume UP do nothing.
Before that I have a choice to continue with Volume UP and Down to boot but if I do button down , same error message.
Click to expand...
Click to collapse
Ok go to www.sammobile.com download your firmware and flash with odin
I appear to have bricked my phone while trying to get back to stock firmware. I am using a galaxy s4 on verizon with windows 8 for reference. My problem is I cannot enter download or recovery mode. When I try to enter either of them it flashes for a second and then disappears. After that I have to remove the battery because the phone won't respond. The same thing happens on a normal boot so I am stuck. Also I am noticing that the phone boots up on it's own when I put the battery it. Could the power button be stuck or something? What can I do to get the phone back to working order?
POWER BUTTON FIX: Ok after some more research I found this which solved my power button problem (Can't insert the youtube video until I have 10 posts) but you basically flick the top and bottom of the phone near the power button to fix it.
Now I am able to go into recovery and download modes
futurepro62 said:
I appear to have bricked my phone while trying to get back to stock firmware. I am using a galaxy s4 on verizon with windows 8 for reference. My problem is I cannot enter download or recovery mode. When I try to enter either of them it flashes for a second and then disappears. After that I have to remove the battery because the phone won't respond. The same thing happens on a normal boot so I am stuck. My battery was fully charged before it was bricked so I don't think that is the problem. Can someone help me out? What can I do to get the phone back to working order?
Click to expand...
Click to collapse
Hi mate ,
Just before suggesting any other kind of action , check you power button......maybe is stuck ( is not uncommon ), seems like is press all the time
MAX 404 said:
Hi mate ,
Just before suggesting any other kind of action , check you power button......maybe is stuck ( is not uncommon ), seems like is press all the time
Click to expand...
Click to collapse
Yep, it looks like that was the problem. Thanks for the response. This thread can be closed mods.
futurepro62 said:
Yep, it looks like that was the problem. Thanks for the response. This thread can be closed mods.
Click to expand...
Click to collapse
Great mate!!
Glad it was easy.
Hello, i have problem : i cant turn off screen. When i press power button it not working. Power button works only when i want shutdown my phone. I also trying do faktory reset. I lost my root too. Please help me. Sorry for my english.
You have to press the home button and the power button together
Thanks for replying. But this is not working. Only doing screenshots.
Sorry, I misread Try to restart the phone
Thanks, but nothing isn't working, i try factory reset and reeboting too. Now I dowloading firmware from sammobile.com. I hope that fix it. I think of that broken some module from Xposed. Sorry for my english.
So i was downgrading to Kitkat from Lollipop and when finished flashing the ROM through Odin, i found out that i forgot to put the Auto-reboot on.
After powering it down, now the device wont start AT all even by click on the power button
Any help/suggestions please?
Samsung Galaxy A300F
I am almost sure it has nothing to do with auto reboot, something went wrong with the process i am guessing. Its dumb thing to do to downgrade
Try to hold volume up+down with power and homebutton at same time for some seconds, helps me on my a5,its boot to download mode then.
GREEETZ!!!!
klemen241 said:
I am almost sure it has nothing to do with auto reboot, something went wrong with the process i am guessing. Its dumb thing to do to downgrade
Click to expand...
Click to collapse
So any suggestions?
_CALIBAN666_ said:
Try to hold volume up+down with power and homebutton at same time for some seconds, helps me on my a5,its boot to download mode then.
Click to expand...
Click to collapse
Didnt work :/
Supervinom said:
So i was downgrading to Kitkat from Lollipop and when finished flashing the ROM through Odin, i found out that i forgot to put the Auto-reboot on.
After powering it down, now the device wont start AT all even by click on the power button
Any help/suggestions please?
Samsung Galaxy A300F
Click to expand...
Click to collapse
It's seems it's corrupted Bootloader, go to your service center. :/
mygalaxya said:
It's seems it's corrupted Bootloader, go to your service center. :/
Click to expand...
Click to collapse
Can they fix?
Is there any fix in general? Or its just a hopeless case?
Supervinom said:
Can they fix?
Is there any fix in general? Or its just a hopeless case?
Click to expand...
Click to collapse
No, infortunately, they can't fix it, the only thing they can make for you is replacing your phone, don't worry
I seen many topics around here with this problem..
Hi
I have rooted my A7. I all time recive message :"
were detected unauthorized activity, please touch to.... (sory because bad english, but i mean that you now what is problem.How i can disable this notifications?
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
Everything seemed to be going to plan until the final step where i reboot my phone & now its stuck on the little animation screen with the red & two little white dots..
have absolutely no idea how to fix this help? anyone? PLEASE!!!!
ps. tried holding down power & volume down (nothing happens) also tried using the command prompt on windows but its 'Waiting for device' if any of that helps the cause.
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
Everything seemed to be going to plan until the final step where i reboot my phone & now its stuck on the little animation screen with the red & two little white dots..
have absolutely no idea how to fix this help? anyone? PLEASE!!!!
ps. tried holding down power & volume down (nothing happens) also tried using the command prompt on windows but its 'Waiting for device' if any of that helps the cause.
Click to expand...
Click to collapse
Try flashing stock rom through fastboot: http://www.androidsage.com/2016/03/12/restore-oneplus-2-full-stock-firmware/
Try Flashing stock rom through TWRP: http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.0.2/
You said that you are unable to get to recovery with the volume keys but I think you are doing it wrong. So to get to recovery power off the device by holding the power button. And then keep holding volume down and power button until you see the oneplus logo and feel the vibration. Let go of both of the buttons once the vibration finish's because if do it to early it will not go to twrp. If if does not work try multiple times
Dead oneplus2.
Hi guys and thanks to all xda community for helping us. I tried to upgrade from 2.0.2 to 3.0.2. But after the instalation my oneplus2 stucks into bootlogo(powered by android). Before i try to upgrade i forgot to enable on system oem unlocking. Now i'm not having access to recovery option,when i try to press volume- +power the op2 vibrate and flashes the screen till i stop pressing the power button,and when i try to enable oem via fastboot always get this message: <remote oem unlock is disabled>. I tried so many option but always getting this message: remote oem unlock is disabled. Please help me...
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
/QUOTE]
@eoinkearney95 did you installed the proper version of Supersu..?
Click to expand...
Click to collapse
Bibin John said:
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
/QUOTE]
@eoinkearney95 did you installed the proper version of Supersu..?
Click to expand...
Click to collapse
I dont know. i tried to instal the 3.0.2 sending the firmware to the folder downloads and then i restarted the op2 in recovery mode and the choosed the option to instal from the internal storage.
Click to expand...
Click to collapse
ciroportugues said:
Hi guys and thanks to all xda community for helping us. I tried to upgrade from 2.0.2 to 3.0.2. But after the instalation my oneplus2 stucks into bootlogo(powered by android). Before i try to upgrade i forgot to enable on system oem unlocking. Now i'm not having access to recovery option,when i try to press volume- +power the op2 vibrate and flashes the screen till i stop pressing the power button,and when i try to enable oem via fastboot always get this message: <remote oem unlock is disabled>. I tried so many option but always getting this message: remote oem unlock is disabled. Please help me...
Click to expand...
Click to collapse
Try this mega unbrick guide and try all the methods if the other ones do not work: https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/