Hey guys. So I bought a SM-t580 on OfferUp. Guy said his kid downloaded a game and it crashed on him. I have tinkered with phones and roms in the past so figured I could fix it. To make a long story short, I've tried everything to no avail. The tablet only boots to download mode. Will not go to recovery. Frp lock is on. Everytime I try Odin(latest version) it gets stuck either at setup connection or initialization. I've tried original USB cable, reinstalled the drivers, you name it. I've never had a tablet/phone beat me. I will not be defeated! Just need some advice. Thanks y'all!
beergenius said:
Hey guys. So I bought a SM-t580 on OfferUp. Guy said his kid downloaded a game and it crashed on him. I have tinkered with phones and roms in the past so figured I could fix it. To make a long story short, I've tried everything to no avail. The tablet only boots to download mode. Will not go to recovery. Frp lock is on. Everytime I try Odin(latest version) it gets stuck either at setup connection or initialization. I've tried original USB cable, reinstalled the drivers, you name it. I've never had a tablet/phone beat me. I will not be defeated! Just need some advice. Thanks y'all!
Click to expand...
Click to collapse
Until you get rid of the FRP lock, the tablet is a brick. BUT, there are too many post here to count on how to do that. Read the latest ones using the combo files.
I've tried them. None work.
Related
So I've searched around the past few hours and can't seem to find a solution to my issue. I have a friend that is currently down on his luck and staying at a homeless shelter, he bought this phone because phones are pretty much a necessity nowadays, samsung galaxy on5, trouble is that the phone was locked when he turned it on so he was stuck with a paperweight, it's been a long time since I tinkered with phones but I figured I could help him out by booting into recovery and doing a factory reset. I had no idea about samsung factory reset protection and now were back to paperweight mode. I downloaded jodin3 and heimdall, but it never shows as connected. Can I root the phone while in recovery or load the factory rom so I can get the phone working again? Thanks for any help.
No, the only options are either ordering a remote unlocking service or find a guide on YouTube. The YouTube way will involve some patience and trial and error. Many guides don't specify what update on the phone they are working on and/or will state that their particular method works for EVERY phone. The stock recovery will tell you what update that it is on by the build number. This might help pinpoint which method to work.
FRP = Google Factory Reset Protection
Samsung Reactivation Lock is a different beast.
Which one does the phone have?
Hey guys,
I could use your expertise and help.
After updating my stock Note 4 Att variant from 5.1.1. to 6.0.1, I came back to my phone powered off. After turning it back on it freezes at the Att logo screen. Trying to boot into safe mode was a no go so I tried booting into recovery. Everything looked go for a second, I was greeted with an installing updates animation but that quickly was shut down and I got the "dm-verity verification failed..." error.
I tried wiping the cache and doing a factory reset. Talking with att technical support was no help at all. They basically told me if wiping the cache and factory reset didn't work I would have to get the phone replaced and pay a $150 deductible. I'm not paying them another dime when their update bricked my phone
So I'm here heart in hand hoping you guys could help me out. I did root my note 2 back in the day but forgot most of what it entails and was pretty bummed when I found out there was no root for the note 4. So I'm not a total noob but bear with me.
I did try Kies 3 but my phone wont connect. I tried off, on and in recovery still nothing.
Searching online it seems like most of the solutions require root access which this phone doesn't have. It also looks like it needs the stock firmware but most of the links I found here and elsewhere are dead, and sammobile doesn't have them either.
So what should I do? Am I out of options? Should I junk it cause Att sucks? Any sort of direction would be a big help! :highfive:
Mal-0 said:
Hey guys,
I could use your expertise and help.
After updating my stock Note 4 Att variant from 5.1.1. to 6.0.1, I came back to my phone powered off. After turning it back on it freezes at the Att logo screen. Trying to boot into safe mode was a no go so I tried booting into recovery. Everything looked go for a second, I was greeted with an installing updates animation but that quickly was shut down and I got the "dm-verity verification failed..." error.
I tried wiping the cache and doing a factory reset. Talking with att technical support was no help at all. They basically told me if wiping the cache and factory reset didn't work I would have to get the phone replaced and pay a $150 deductible. I'm not paying them another dime when their update bricked my phone
So I'm here heart in hand hoping you guys could help me out. I did root my note 2 back in the day but forgot most of what it entails and was pretty bummed when I found out there was no root for the note 4. So I'm not a total noob but bear with me.
I did try Kies 3 but my phone wont connect. I tried off, on and in recovery still nothing.
Searching online it seems like most of the solutions require root access which this phone doesn't have. It also looks like it needs the stock firmware but most of the links I found here and elsewhere are dead, and sammobile doesn't have them either.
So what should I do? Am I out of options? Should I junk it cause Att sucks? Any sort of direction would be a big help! :highfive:
Click to expand...
Click to collapse
Make sure samsung kies or samsung usb drivers are installed on your pc.
Download stock marshmallow firmware and flash through odin .this method does not require root.
After flashing dont let the phone boot just go to recovery and wipe cache+wipe data factory reset then reboot.
Wait 10 to 15 minutes.
Stock rom link.
https://www.androidfilehost.com/?fid=24651430732238073
Extract file and choose AP tab in odin.
Upload firmware file then connct device via usb cable to pc.
Hit start in odin.
You're the man! Not only did you save my phone, you stuck it to Att's money grubbing hands in one fell swoop. People will write songs about you, you'll go down in the history books as the man, the myth, the legend! People will swoon in your presence!
In all seriousness though you're awesome! Thank you!
One last question, will I be able to use the ota updates from here? Not that I would be too comfortable using them after this debacle, just wondering if they should work.
Mal-0 said:
You're the man! Not only did you save my phone, you stuck it to Att's money grubbing hands in one fell swoop. People will write songs about you, you'll go down in the history books as the man, the myth, the legend! People will swoon in your presence!
In all seriousness though you're awesome! Thank you!
One last question, will I be able to use the ota updates from here? Not that I would be too comfortable using them after this debacle, just wondering if they should work.
Click to expand...
Click to collapse
Thanks for the compliment. you just made me feel like i am a Hercules :victory:
If you want my advice dont ever take ota updates.
Just go to www.sammobiles.com/firmwares and grab latest rom for your model and flash in odin as you did.
Latest rom comes with the same security patch update the 1 comes in ota.
I personally do this way all the time.
Hope that helps and have a good day.
Hello there,
i need help with fixing my phone, i tried to change the model of the phone by changing the build.prop file, like everyone else who does something like this for the first time. i bricked my phone and it went into a bootloop.
after ton of research on multiple websites and especially xda-developers, i managed to flash the phone with a suitable frameware form the galalxy S5, the first time i did it i accidently put the firmware into the BL position into ODIN. then i put it into AP and reset the device.
the download was succesfull, but the phone didnt start up. the next day i turned the phone on, and after 5 mins being stuck on the Samsung logo, it finally booted up and i managed to get inside the phone. i thought it has been fixed, the device asked if i wanted to apply updates, which i said yes to. It updated and tried to restart itself.
now it wont turn on, everytime i try restarting it it is just shutting itself again animated samsung logo fades.
i don´t know what i should do right now, i tried looking for similar situations to mine but i couldn´t find anything similar.
Can someone tell me what i should do in oder to get it fixed pls.
model: SM-g900f
thanks in advance.
edit: it is working again, but it has been completely reset. for now it worked. going to update it again, i will put if the same problem accours again.
bayar16 said:
i tried to change the model of the phone by changing the build.prop file, like everyone else who does something like this for the first time. i bricked my phone and it went into a bootloop.
Click to expand...
Click to collapse
Most likely you forgot to set permissions 0x644 for this file after editing it.
It's a common mistake.
Folks I initially tried to root my phone *SM-G935F* using Odin and a CF hero2lte file. The flashing was all good to go with a green pass. Then upon rebooting the phone got stuck on the Samsung logo boot screen with red words at the top that said **Recovery Is Not Seandroid Enforcing**. This being the case all I was able to get into was (Download Mode). I tried to do the samething a few times and gave up after no successful attempts and the phone not being able to successfully reboot.
Fast forward to present I downloaded the phone's firmware which was a zip that contained 4 files (5 total actually because there was another CS file in the event that you wanted to preserve your data etc.). I loaded all of the files in Odin and made an attempt to flash the phone again however it got stuck on *System* and never go to Green *Pass*. So I figured I would try it a couple of more times in case Odin or something just got hung up on the first try. Any how that wasn't the case.
Now with the above being said what did change is when I would try to reboot into *Download Mode* again it said something along the lines of Emergency Smart Switch Recover. I downloaded Smart Switch onto my computer and went through the specific steps to try to Recover the phone using Smart Switch. Now after it was all done I got to the blue screen with the Android and it said *Erasing...* then the phone booted up and its now stuck at the Samsung animation screen. This being said as of current I can now access *Download Mode* and also boot into the black screen or *Recovery Mode* I think its called where I can reboot the phone through a bootloader, power off, factory data wipe / reset, etc etc.
The above being said I have tried the factory reset / wipe. The reboot in bootloader, reboot phone, all with no success.
Also would like to add that before doing all of the above I forgot to tick *USB Debugging* in Developers Mode when the phone was in its normal state. I must also mention that all of this was a first for me and I looked at doing so to try and recover lost data on my phone. Also wanna add that I am not too familiar with ADB or twrp or how to mess with any of that stuff given the limited access I have to my device because it can no longer bootup like it normally would.
I'm currently at a lost of words as to what I can do next as I am out of ideas and could really use some help. I would also be more than happy to donate a little to anyone who is able to help me boot my phone back up and get things back to normal.
Any and all help would be greatly appreciated.
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Hydranize said:
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Click to expand...
Click to collapse
Bro would you tell pls , what you did to restore. Thanks
shah22 said:
Bro would you tell pls , what you did to restore. Thanks
Click to expand...
Click to collapse
After me not being successful with the root or with flashing the stock OEM firmware using Odin the phone would get hung up in download mode and the only difference when it would go into download mode it would say to use SmartSwitch Emergency Recover which is what was used and that fixed the issue and the phone rebooted completely fine.
However the above being said I honestly still feel the phone has some small minor issues that I did try to resolve all with no luck. First off when loading to my home screen the icons, and clock, etc etc take about 2 or 3 seconds longer for them to appear on screen than it used like when the phone was new out of the box.
Other thing to note is for some odd reason this issue was thought to be worked out by just booting into recovery mode and doing a factory reset from there, wiping the cache, etc etc. Well this also didn't solve the issue and for some odd reason when performing this the phone didn't reboot on its own.
Basically how it should be normally is after you select that you want to do a factory reset, wipe cache, etc etc, the phone should normally reboot and go through the entire process by itself, however this was not the case. The phone instead went back to the recovery screen and I had to select reboot rather than it normally rebooting on its own.
I've honestly given up on things and given that it is in working order with just a few small minor hiccups I've decided to give the phone to a family member which they plan to use as trade-in credit towards a new Galaxy Note 8.
That being said I will always have a soft spot for the S7 Edge being it was my first smartphone after I had bought a Sony Xperia Z during the same year but returned it the day after because what was to me being poor quality of the Sony phone.
Hmm, looks strange bro , your phone didnt worked after flashing stock rom with odin , and this is the last resort , but you said it was normal before you tried to root , so i guess it was still a software issue other than some hardware problem due to software , but anyways wish you good luck in future , another thing is that my s7 edge has also a very poor build quality , has front camera issues , paint peeling around usb port , wifi issue and high battery degradation , but that happens i guess with today's phones
The version of Odin I used was v3.10.6. I had tried the most current version and a few others, and from the get go for whatever reason this was the only version that would actually pickup the phone being added. Well wait hold on a second the other version would say added when the phone was in but when hitting start nothing would happen, even after waiting an extensive amount of time, also note that the com was highlighted that blue ish color indicating the phone was being recognized by Odin but once again for some odd reason it was only version v3.10.6 that carried out the process of my root attempt and also the attempt I made flashing the original firmware on it.
As for quality the phone had no paint chip or peeling, neither the silver aluminum frame around it either. The build quality was beautiful and up to par with mine. I had a soft spot for my S7 Edge also because it was in the white color which at the time of purchasing was a bit more scarce than the other colors. I purchased the phone from an Amazon.com seller, and during that time I also purchased 2 others from other Amazon sellers but returned those because they had carrier animations for them that were Band LTE or Brand LTE, whatever its called.
This one had no carrier animation upon boot and turned out to be a UK Nougat model. Haven't really seen or came across another one since that would be from a trusted seller or source. Nowadays you never know what you're getting both on eBay and Amazon from these third party sellers.
Yeah thats really strange with odin , its good that you dont have quality issues which struck heavily on me , but yes everyone should be quite careful when ordering online and only should do with trusted resellers
Hydranize said:
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Click to expand...
Click to collapse
I'm facing the same problem buddy. Could you pass me the process for the recovery that was used?
vini3237 said:
I'm facing the same problem buddy. Could you pass me the process for the recovery that was used?
Click to expand...
Click to collapse
What phone are you having the issue with and what are you using that caused the issue? I can possibly try to help you out if I know a little more about your situation and device.
Hydranize said:
What phone are you having the issue with and what are you using that caused the issue? I can possibly try to help you out if I know a little more about your situation and device.
Click to expand...
Click to collapse
Phone is SM-G935FD
I do not know what caused it, I already got the celuar so, in status it says Custom.
I already tried to blink for odin 3 different Stocks and the same thing continues.
When I got it it could not access the recovery mode, only the download mode was accessible, after flashing the Brazilian Stock 6.0.1 I was able to access recovery mode.
The phone turns on, and hangs at boot, Samsung logo, restarts and stays in infinite looping.
Can it be Hardware?
Try to flash the original Firmware for it, make sure the Firmware is the one specific to that model, download it and load all of the Firmware files into Odin.
Hydranize said:
Try to flash the original Firmware for it, make sure the Firmware is the one specific to that model, download it and load all of the Firmware files into Odin.
Click to expand...
Click to collapse
Ok now i think what was the problem , you didnt enabled usb debugging , and for flashing with odin its a must ! , for guys who want to flash firmware using odin .. please enable usb debugging in developer options or you will have much issues and may also brick your phone , so if you dont want to enable usb debugging or developer options , just use samsung smart switch on pc to flash your firmware.
Yeah that was my issue was I had OEM Unlock checked off and one other thing in Developer Options and forgot to enable USB Debugging leaving me stuck in the process when the phone couldn't reboot normally after the flash attempts. But yeah SmartSwitch Emergency Recovery should definitely be able to fix and resolve the issue if the phone can't reboot normally.
Hello Everyone,
First of all I am a newbie when it comes to Android, so forgive me for asking such a noob question.
So here is the story, my girlfriend's dad passed away few months ago. He used an old Samsung S8, sadly we do not know what the login pattern is or his Google account password (We did try recovery options but to no avail)
As there was no other option, I went ahead and had the phone factory reset, and from what I learned the phone is now FRP locked.
After a reading a few more guides I downloaded a tool called Odin and some 'Stock ROM' and flashed it hoping that would resolve the issue (Oh boy, how wrong I was) and the phone is now stuck on a screen saying "Error occurred while updating the device software, use the emergency recovery function"
My girlfriend just wanted to be able to use it for some time, and now I feel really bad for screwing it up.
Just wondering what my options are and if the phone is salvageable at all?
Hey, are you sure you downloaded the right ROM for this S8? Since there are two models of this phone, each with a different chipset (Exynos / Qualcomm Snapdragon). I feel like this error could come from a bad firmware? Does Odin still see the phone when you connect it to the PC?
Edit: Apparently people solved this problem using Samsung's Smart Switch on PC.
Yes, I think I downloaded the correct one. The phone is from Telstra Australia and so downloaded the ROM from Samfrew that was listed as Telstra, I typed in the model number which is SM-G950F it is this firmware that came up.
Yes when I put the phone into Recovery mode and connect to PC, Odin detects it, but the flash gets stuck halfway. I've loaded the BL, AP, CP and CSC that came within the ZIP file from Samfrew and under options only ticked 'Auto Reboot' and 'F.Reset Time'
Also tried just with the BL and AP but same deal.
blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
Have you tried Samsung's Smart Switch app on PC? Apparently people successfuly fixed this error with it.
blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
I've never had to deal with a Samsung that has a FRP lock, that could just be the reason why the flashing fails, i wouldn't know. I hope you can get the Factory Reset to work :/
Also tried the Smart Switch app but it would recognize the phone. Thank you for looking into this.
You could send a message to this user "makeyourself" : https://forum.xda-developers.com/t/i-think-i-screwed-the-pooch-on-this-one.3939572/post-79729654 , he seems aware about the FRP locks / flashing issues.
Good luck with your S8.
@Derbi75 thanks heaps, will message makeyourself now.
Ideas? Anyone?
blackslash said:
Ideas? Anyone?
Click to expand...
Click to collapse
From what I know, the error only appears if the phone was interrupted during flashing. Such as, Odin was writing into phone but you probably removed the USB or stuff. The screen you see is actually download mode. It is just renamed. Try plugging in your device when it's on the error screen then re-flash it.