My redmi 2 prime(2014813)'s emmc just died. It seems that the hynix emmc that was used in this redmi 2 variant was not very good.
For those who had the same problem and was forced to change their emmc, what brand and model did you use? Can you provide the files(dump,...) needed for the new emmc ?
You can find those files online actually, just install it and put it into 9008 com mode, it should boot into it without anything on the emmc.
Then use the tool you can find to flash the rom and you are good to go. If it didn't boot into edl (9008 mode), use this guide for booting to edl mode: https://c.mi.com/thread-1479882-1-0.html
You can find the ROM here, follow the guide i gave you and unbrick your device. (yea this is basically unbricking)
Happy Hacking!
Related
Hi All,
I need help to bring back my Asus Zenfone 2 Laser ze550kl from dead condition, I can't enter fastboot mode to flash any ROM also. Device manager only shows "Qualcomm HS-USB QDLoader 9008 (COM3)" under Ports section. After searching online, I found a link to recover it, but it needs certain files which I could not find in web. The files required are:
rawprogram0.xml
patch0.xml
for ze550kl. I have installed QPST 2.7 Qualcomm tool, and additinally need the complete EMMC image.
https://devlakiutak.wordpress.com/2013/08/10/fixdeadboot/
Can someone please help ?
Thanks
gurung_vishwas1 said:
Hi All,
I need help to bring back my Asus Zenfone 2 Laser ze550kl from dead condition, I can't enter fastboot mode to flash any ROM also. Device manager only shows "Qualcomm HS-USB QDLoader 9008 (COM3)" under Ports section. After searching online, I found a link to recover it, but it needs certain files which I could not find in web. The files required are:
rawprogram0.xml
patch0.xml
for ze550kl. I have installed QPST 2.7 Qualcomm tool, and additinally need the complete EMMC image.
https://devlakiutak.wordpress.com/2013/08/10/fixdeadboot/
Can someone please help ?
Thanks
Click to expand...
Click to collapse
if your mobile is turning then surely u can enter the fastboot mode, bsc i hav faced it too
Here you have another tutorial: http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Someone said it the comments that you will find rawprogram0.xml patch0.xml and file after you extract them from the ROM.
Here is the stock marshmallow ROM: https://www.asus.com/support/Download/39/1/0/22/ZROQURlyupei1ZQz/32/
The same happens to me, trying to unlock the bootloader phone. I've sended my phone to warranty and they opened the phone to fix
Sorry for bad english
Good luck
gurung_vishwas1 said:
Hi All,
I need help to bring back my Asus Zenfone 2 Laser ze550kl from dead condition, I can't enter fastboot mode to flash any ROM also. Device manager only shows "Qualcomm HS-USB QDLoader 9008 (COM3)" under Ports section. After searching online, I found a link to recover it, but it needs certain files which I could not find in web. The files required are:
rawprogram0.xml
patch0.xml
for ze550kl. I have installed QPST 2.7 Qualcomm tool, and additinally need the complete EMMC image.
https://devlakiutak.wordpress.com/2013/08/10/fixdeadboot/
Can someone please help ?
Thanks
Click to expand...
Click to collapse
colonho said:
The same happens to me, trying to unlock the bootloader phone. I've sended my phone to warranty and they opened the phone to fix
Sorry for bad english
Good luck
Click to expand...
Click to collapse
Thanks for reply. I think that is the last option which I have now. I was trying to correct it myself, but can't unless I have at least FASTBOOT working.
Fastboot erase config....
After that I stucked at boot logo
Used xfstk then aft but stucked at boot used fastboot commands for flashing system all gonna smooth but stucked at boot...
Used recovery to sideload marshmallow ... succeed. But also stucked at boot ..unlock boot loader flash TWRP flashing custom rom also stucked at boot logo... PLZZ help me guyzzz
And it shows error in TWRP
Unable:to mount Config(invalid argument)
First, apologize for poor English.
Does anyone have full system backup as single img or bin file? Accidentally flash ZUK Z1 rom when porting MIUI8 and now my device is bricked, and partitions is a mess. QFIL doesn't allow me flash because detect ZUK device. Is anyone kind enough to make backup with EMMCRAW_1.4.0.0 or something similar? It's important to be a software without model check, just simple raw copy as single file.
update: Things goes worst. Tried to save it with Qfil but it fail, Miflash fail too and ruined my partitions. Long story short, now my device doesn't boot, blank screen, windows XP,7 and 10 recognize Qualcomm 9008 mode if i power it on without battery. With plugged battery recognized as Linux CD...something, without partitions. ADB and Fastboot doesn't work on any case. On many tries, Qfil accept only ZUK Z1 rom, flashing fine but doesn't boot off course. If i start QPST Configuration tool, it detects port but progress bar loading and never goes full, EMMC Software Download tool fail too. So, i'm asking for advice.
I found a friend with the same phone and make raw system dump, but result is same, only Qualcomm 9008 mode. Is my mainboard broken?
Did you try with older qfil? QPST ver2.7.422?
maybe this help
Krasimir said:
First, apologize for poor English.
Does anyone have full system backup as single img or bin file? Accidentally flash ZUK Z1 rom when porting MIUI8 and now my device is bricked, and partitions is a mess. QFIL doesn't allow me flash because detect ZUK device. Is anyone kind enough to make backup with EMMCRAW_1.4.0.0 or something similar? It's important to be a software without model check, just simple raw copy as single file.
update: Things goes worst. Tried to save it with Qfil but it fail, Miflash fail too and ruined my partitions. Long story short, now my device doesn't boot, blank screen, windows XP,7 and 10 recognize Qualcomm 9008 mode if i power it on without battery. With plugged battery recognized as Linux CD...something, without partitions. ADB and Fastboot doesn't work on any case. On many tries, Qfil accept only ZUK Z1 rom, flashing fine but doesn't boot off course. If i start QPST Configuration tool, it detects port but progress bar loading and never goes full, EMMC Software Download tool fail too. So, i'm asking for advice.
Click to expand...
Click to collapse
try volume down + power and try formating everything fro that menu
K920
Hi,
I have exactly the same problem. Did you resolve it?
Hi there!!!
My OP5 is full dead!!! Black screen, no charging, no buttons !!!
That why ive tried change rom, flashed via twrp installed!!!
I think the good thing is PC can recognize because device in the Qualcomm HS-USB Qdloader 9008 /EDL mode.
I have tried unbrick it, using this tools
QFIL
Q phone download tool
eMMC DL TOOL
Xiaomi Mi Flas Tool
But....................I NEED A STOCK ROM MUST HAVE
“rawprogram0.XML”, “patch0.XML”, “prog_emmc_firehose_8974.mbn” and “MPRG8974.mbn” flashers . ETC, ETC
BECAUSE
OnePlus5OXYGEN_23_OTA_009_all_1707032123_c10521d0fb8b46c0. ZIP
is missing that kind of files.
DOES SOMEBODY CAN TELL ME WHERE CAN I GET THIS KIND OF ROM FOR OP5!!!????
HELP HELP
Get it from the official site
i have a redmi 4 prime don't boot i succed to flash it but it don't boot it ever on qualcomm HS-uSB qdloader 9008. there is no fastboot no recover
ever a black screen.
no one to help me??????
hi, sounds like you r hard bricked.
you need to make a deep flash cable. use it to flash stock image ..this normally works
look for "xiaomi deep flash cable"
and please always supply helper with more info..
eg.
how did u manage to flash without fastboot, what image did u flash, how did u brick it.. and so on.
I bricked my asus, I searched the forum and I figured out how to unbrick it, but the problem is that I can't connect it in EDL mode to flash it, I installed all the drivers, and I use the QPST flash tool, I put pictures to help me find the EDL mode, thank you all