Related
Hey guys,
Ive been having problems running PA 2.99 -
http://forum.xda-developers.com/showthread.php?t=1800268
I get through initial set up and BAM! "Unfortunately, launcher has stopped"
I thought it might have been UI settings, i flicked across main page and there was a settings shortcut, clicked it and changed UI to all different modes i could, phone, phablet, tablet, tablet (mid). after that i lost top and bottom bars. I reset and now I have a black screen with
"Unfortunately, launcher has stopped"
any ideas here? I only have eyes for PA
I'm running Motley kernel build 244 - http://forum.xda-developers.com/showthread.php?t=1775798
Might want to read the thread some. It's a known issue and has had quite a few mentions in the past 24-48 hours.
Sent from my Nexus 7 using Tapatalk HD
gapps? what version of gaaps did u flash?
Sent from my Nexus 7
lyrad12 said:
gapps? what version of gaaps did u flash?
Sent from my Nexus 7
Click to expand...
Click to collapse
Also make sure you wipe cache/dalvik before the GAPPS flash.
lyrad12 said:
gapps? what version of gaaps did u flash?
Sent from my Nexus 7
Click to expand...
Click to collapse
Ok I just woke up so forgive me.
I have reflashed and wiped everything but WITHOUT Gapps.
problem seems to be gone and I will be loading APK's via TWRP for the time being.
mabye i should try this Gapps instead? - http://goo.im/devs/paranoidandroid/roms/gapps - second one on the list, I was using the one at the top of the list.
I have been using the Nov. 30 signed gapps package at goo.im/gapps. That is the most recent one that didn't cause the launcher issue for me. Another option if you don't want to change gapp packages and you intend to use a different launcher is to click on notifications and then one of the play store notifications. Once in the market install your launcher of choice and open it and set it as default. That is what I did this time and have had no issues using Nova launcher.
mellodroid said:
I have been using the Nov. 30 signed gapps package at goo.im/gapps. That is the most recent one that didn't cause the launcher issue for me. Another option if you don't want to change gapp packages and you intend to use a different launcher is to click on notifications and then one of the play store notifications. Once in the market install your launcher of choice and open it and set it as default. That is what I did this time and have had no issues using Nova launcher.
Click to expand...
Click to collapse
Ok i might give that a try.. Thanks
hi all,
i have a n7 2012 with multirom mod. i am trying to find a rom with multiwindow support but every time i add a rom having mw support to multirom mw doesnt work. actually it work but i cant open 2 apps at the same time, when the second app is opened first one closes.
i dont know which rom it was but once i opened 2 app at the same time (youtube and yandex navi app). but this time when i switch between apps the other one pauses.
is this a kernel issue? should i also flash a kernel? because i use rooted stock kernel.
regards
any idea?
hugo_bjk said:
hi all,
i have a n7 2012 with multirom mod. i am trying to find a rom with multiwindow support but every time i add a rom having mw support to multirom mw doesnt work. actually it work but i cant open 2 apps at the same time, when the second app is opened first one closes.
i dont know which rom it was but once i opened 2 app at the same time (youtube and yandex navi app). but this time when i switch between apps the other one pauses.
is this a kernel issue? should i also flash a kernel? because i use rooted stock kernel.
regards
Click to expand...
Click to collapse
i'm having same issue with xposed module xmultiwindow on stock + xposed framework, so that's not gonna help ya
any other help please
First you need root,xposed installer ..see here
after those follow the steps
Steps:
download xhalo floating module for lollipop from here
now install and enable the module in xposed installer
give root permission to xhalo and reboot
now install floatification app from here [this is trial ,you need to get full version]
now after installing full version ,open app goto settings and tick Launch App in Halo window
in app notifications select the apps[select the pin icon also in that] you want to used as halo mode[for example see attachment]
now goto phone settings and click accessibility,in that turn ON floatification and reboot
And Result will be like in attachment pic..
Credits @zst123 for XHALO module and @rovo89 for xposed installer
Sorry for testing it on another device, but it is working as expected. Device used: Motorola Razr HD Android version 5.1.
WasifGD said:
Sorry for testing it on another device, but it is working as expected. Device used: Motorola Razr HD Android version 5.1.
Click to expand...
Click to collapse
Works with every android phones which are having Xposed
Comments for floatification app looks weird. Does it really works stable?
Phoost said:
Comments for floatification app looks weird. Does it really works stable?
Click to expand...
Click to collapse
His latest version messed up..
Use v1.7.5 floatifications.. That is the best he gave
Do you have a reliable source for this older version?
I tried it with version 1.7.5
It looks very nice. Awesome functionality.
Later I discovered a serious problem.
After moving chathead I had two chatheads on the screen. If you reboot in this state phone will stuck in boot circle. Only solution I found was reflash firmware.
Because moving of chathead could be done acidently this bug was too major for me. I decided to not use the (otherwise) wonderful feature.
Would be nice to have a stable version.
Phoost said:
I tried it with version 1.7.5
It looks very nice. Awesome functionality.
Later I discovered a serious problem.
After moving chathead I had two chatheads on the screen. If you reboot in this state phone will stuck in boot circle. Only solution I found was reflash firmware.
Because moving of chathead could be done acidently this bug was too major for me. I decided to not use the (otherwise) wonderful feature.
Would be nice to have a stable version.
Click to expand...
Click to collapse
It is ultra rare to show two chathead, and if they come, just force close the floatifications that's all..
Btw turn on floatifications in the accessibility
Thanks for the advice. For me two chatheads appears more or less allways. Anyway, I'll give it a try.
Now I'm using the new version of Floatification app. With this one you can't accidently move the chathead. (Even if you do there are no double chatheads with this version).
The app is full of small bugs. Right now I'm fighting with adding a new app to chatheads. Chatheads simply not updated even if I press "Set Standard" which restarts the service. Closing floatification app doesn't help, too.
The features it provides are GREAT but I hope there will be an update.
causes to boot-loop on stock firmware
Not working
Recently, when looking for a ROM for my Nexus 7 (2013) I found, that those guys actually also build ROMs for our Z3C. Been using them for several months now and I am very satisfied - very stable ROM.
So here you go:
www.exodus-developers.net/exodus-5.1/z3c/
Xposed users:
Wipe Cache + Dalvik after flashing Xposed. Wipe also after recovering apps with Titanium Backup with already installed Xposed.
Exodus Updater - like in CyanDelta you can add additional zips to be flashed with ROM updates (find it in settings), like custom kernel / Xposed /... (M5 kernel is awesome and works great with Exodus)
Zwulf said:
Recently, when looking for a ROM for my Nexus 7 (2013) I found, that those guys actually also build ROMs for our Z3C. Been using them for about 10 days and I am very satisfied, very stable ROM.
So here you go:
www.exodus-developers.net/exodus-5.1/z3c/
Btw. you can find an Exodus updater app in Play Store - like in CyanDelta you can add additional zips to be flashed with ROM updates (find it in settings), like custom kernel / Xposed /... (M5 kernel is awesome and works great with Exodus)
Mods: If this is the wrong place for the thread or offends anyone in any way: sorry, please remove it. Just wanted to post it, where people usually watch out for ROMs, so they find it quickly - I didn't see an Exodus thread yet in Z3C sections.
Click to expand...
Click to collapse
How about the camera? There is the reverse fisheye bug right?
sfrique said:
How about the camera? There is the reverse fisheye bug right?
Click to expand...
Click to collapse
Sadly, yes. Didn't find a custom ROM without it yet. Also got it in stock, but the effect is not as strong there. Still no clean pic with Z3C, neither in stock nor in any custom ROM. Anyway a very good ROM.
Gesendet von meinem Nexus 7 mit Tapatalk
Zwulf said:
Sadly, yes. Didn't find a custom ROM without it yet. Also got it in stock, but the effect is not as strong there. Still no clean pic with Z3C, neither in stock nor in any custom ROM. Anyway a very good ROM.
Gesendet von meinem Nexus 7 mit Tapatalk
Click to expand...
Click to collapse
How good is the support for this ROM, because on the part of custom ROM support is one of the most needed part.
loopguru said:
How good is the support for this ROM, because on the part of custom ROM support is one of the most needed part.
Click to expand...
Click to collapse
Well, there is no ROM-thread for Z3C Exodus build... I'm not the creator nor the maintainer of the build, just found it and wanted to share the link, so it's hard for me to say how good the support is, didn't need it yet - everything works fine on my device. Not one single random reboot with Xposed since I use this ROM.
If you need support you probably should watch out on G+ (read pinned post!):
https://plus.google.com/communities/106801227383087889476
Great ROM, been running it for months, Devs are aggressive on bug fixing.
What is the base of the ROM ?
I also installed it today. Wisely many things are not added in this rom, like camera, calendar, music. 9th October build is going into bootloop bcoz of xposed installer, anyone having similar issues
Sent from my GT-I9192 using XDA Free mobile app
nathan30 said:
What is the base of the ROM ?
Click to expand...
Click to collapse
CM12.1 nightlies.
loopguru said:
I also installed it today. Wisely many things are not added in this rom, like camera, calendar, music. 9th October build is going into bootloop bcoz of xposed installer, anyone having similar issues
Sent from my GT-I9192 using XDA Free mobile app
Click to expand...
Click to collapse
I'm using it with M5 permissive kernel and Slim Zero Gapps. Try this config, works great for me, no bootloops. You should wipe cache and dalvik directly after flashing Xposed, without doing this you will probably run into a bootloop or get a system starting and constantly rebooting after system is up. Use latest version (v75 arm) of Xposed.
Zwulf said:
CM12.1 nightlies.
I'm using it with M5 permissive kernel and Slim Zero Gapps. Try this config, works great for me, no bootloops. You should wipe cache and dalvik directly after flashing Xposed, without doing this you will probably run into a bootloop or get a system starting and constantly rebooting after system is up. Use latest version (v75 arm) of Xposed.
Click to expand...
Click to collapse
What is the things add by this ROM instead of CM12.1 ?
nathan30 said:
What is the things add by this ROM instead of CM12.1 ?
Click to expand...
Click to collapse
You could easily give it a shot with MultiROM. I'm too lazy to list everything here... ;-P
There are quite a few things. Most important ones for me personally are the customizable clear all button in recents, customizable navigation bar height, double tap to sleep on lockscreen (double tap anywhere) and four tiles per row in quick settings. I also like it to be able to deactivate navigation ring as I never use it and it only gets on my nerves when accidentally swiping over the navigation bar.
It is not this rom version but you can say build after 5th October causing this kind of problem. May be some minor bug with latest builds
Sent from my Xperia Z3C using XDA Free mobile app
loopguru said:
It is not this rom version but you can say build after 5th October causing this kind of problem. May be some minor bug with latest builds
Sent from my Xperia Z3C using XDA Free mobile app
Click to expand...
Click to collapse
No problem with bootloops except one case:
1) Factory Reset
2) Flash ROM
3) Flash M5 (permissive) kernel (for V4A)
4) Flash Xposed v75 arm
5) Wipe cache & dalvik
6) Boot up system
7) Restore many (300+) apps with Titanium Backup
In this case ROM will reboot shortly after TB is closed and a few seconds after system is running and up it will reboot and do this again and again until the battery is empty.
Solution: Boot to recovery, wipe cache & dalvik again. Everything should be fine now, no more bootloops.
This behavior also occurs on CM12.1 nightlies for me so seems to have nothing to do with the ROM itself but rather CM base.
Zwulf said:
No problem with bootloops except one case:
1) Factory Reset
2) Flash ROM
3) Flash M5 (permissive) kernel (for V4A)
4) Flash Xposed v75 arm
5) Wipe cache & dalvik
6) Boot up system
7) Restore many (300+) apps with Titanium Backup
In this case ROM will start and a few seconds after system is running and up it will reboot and do this again and again until the battery is empty.
Solution: Boot to recovery, wipe cache & dalvik again. Everything should be fine now, no more bootloops.
This behavior also occurs on CM12.1 nightlies for me so seems to have nothing to do with the ROM itself but rather CM base.
Click to expand...
Click to collapse
Thanks for the reply, i moved out of this ROM ,bootloop problem sorted out with exposed v75 arm.
loopguru said:
Thanks for the reply, i moved out of this ROM ,bootloop problem sorted out with exposed v75 arm.
Click to expand...
Click to collapse
Same here, without Xposed no bootloop at all. With Xposed: constantly rebooting after recovering apps (Xposed already installed) but gone after wiping cache & dalvik again.
hey guys. have someone problem with navbar? idk why is doesnt show buttons in landscape. i tryed to implement other navbar with gravitybox, but same.
it keep sayin error 7!
whats the problem?
hmnt said:
it keep sayin error 7!
whats the problem?
Click to expand...
Click to collapse
that should help u
Hello
With Resurrection Remix (Oreo) on a Samsung Galaxy S5 I can't drag down the status bar when the screen switches to fullscreen. Youtube for instance. It works when I start the device on safe mode. I disabled some apps which I thought they may cause this issue. I also disabled all Xposed modules. I guess safe mode not only affects which apps are loaded or not. It might also just not apply some internal settings.
Also I tried another launcher. Nova and Google.
What could I do now?
I started already a topic on the Resurrection subforum, but no answers.
nobody?
Really nobody? Or is it forbidden to talk about the statusbar?
XtraWater said:
Really nobody? Or is it forbidden to talk about the statusbar?
Click to expand...
Click to collapse
You can talk about it buts it's probably best to post this sort of question in the rom thread where people who use the rom are more likely to see it
I don't use that rom - I'm using lineageos 15.1 & don't have any such issue
TheFixItMan said:
You can talk about it buts it's probably best to post this sort of question in the rom thread where people who use the rom are more likely to see it
I don't use that rom - I'm using lineageos 15.1 & don't have any such issue
Click to expand...
Click to collapse
I see. Could I switch to Lineage without lose my data and settings? I guess not...but who knows....
XtraWater said:
I see. Could I switch to Lineage without lose my data and settings? I guess not...but who knows....
Click to expand...
Click to collapse
No if switching roms always format system data cache first
XtraWater said:
Hello
With Resurrection Remix (Oreo) on a Samsung Galaxy S5 I can't drag down the status bar when the screen switches to fullscreen. Youtube for instance. It works when I start the device on safe mode. I disabled some apps which I thought they may cause this issue. I also disabled all Xposed modules. I guess safe mode not only affects which apps are loaded or not. It might also just not apply some internal settings.
Also I tried another launcher. Nova and Google.
What could I do now?
I started already a topic on the Resurrection subforum, but no answers.
Click to expand...
Click to collapse
I don't have this issue in RR Oreo. Just tried it again, status bar works fine in YouTube
BlueCyclone said:
I don't have this issue in RR Oreo. Just tried it again, status bar works fine in YouTube
Click to expand...
Click to collapse
Thank you.
The problem is, no status bar and no screen rotation. With that, this rom is actually quite useless.
There is just nothing like a decent replacement for the stock rom. I guess, there are users or developers here who could provide a solution to this issue. But well.... Nobody is willing to help.
XtraWater said:
Thank you.
The problem is, no status bar and no screen rotation. With that, this rom is actually quite useless.
There is just nothing like a decent replacement for the stock rom. I guess, there are users or developers here who could provide a solution to this issue. But well.... Nobody is willing to help.
Click to expand...
Click to collapse
Sensors have been fixed in lineage 15.1
You need to understand that custom roms generally use the same common device source code - if the source code has a bug every rom based on that source code will have that bug
All I can say is the previous user using the same rom doesn't have that issue & I don't have that issue with lineageos & the rotation was fixed in the last build (rotation would work in previous builds but may randomly stop until restart)
From reading the resurrection remix thread the sensors commits have been merged into their source in the last build yesterday - you should update the rom & wipe delvik/art cache if not already done so
If you still have problems I would format system data cache & then flash the latest official version of lineageos from their website
Remember that there are different versions of the galaxy s5
Mine is 900f or klte
Flash the correct version for your variant
If problems still exist logcat & send to developer
TheFixItMan said:
Sensors have been fixed in lineage 15.1
You need to understand that custom roms generally use the same common device source code - if the source code has a bug every rom based on that source code will have that bug
All I can say is the previous user using the same rom doesn't have that issue & I don't have that issue with lineageos & the rotation was fixed in the last build (rotation would work in previous builds but may randomly stop until restart)
From reading the resurrection remix thread the sensors commits have been merged into their source in the last build yesterday - you should update the rom & wipe delvik/art cache if not already done so
GdddF too.
If you still have problems I would format system data cache & then flash the latest official version of lineageos from their website
Remember that there are different versions of the galaxy s5
Mine is 900f or klte
Flash the correct version for your variant
If problems still exist logcat & send to developer
Click to expand...
Click to collapse
Hello
Mine is a G900F too.
I just upgraded to the latest RR version. Now I played around and it seems, auto rotation just works fine. It's even quite fast. Wow. If it stays that way, I'm more than happy. It also doesn't longer rotate the desktop. The behavior of auto-rotate seems to be now as it supposed to be.
Thank you very much. I upgraded RR last week the first time and thought...well...maybe that would solve it. So, I wouldn't tried it again without your suggestion.
Now I have to solve the issue with the status bar. It works well when I boot the phone into safe mode. With that I guess a particular app is responsible for this issue. But I wasn't able to identify it.
I had an app 'Bootmanager' but it end of life. I would like to disable 50% of the apps and see if it works. If not, disable the other 50%. Now I'm not sure what is the best way to isolate the culprit.
If i can solve this issue, then RR would provide all I need.
For the moment, I use the Xposed Edge modul (it's a great module btw.) were I'm able to expand the notification panel with a swipe gesture. That's ok.
I also played around with the 'extended desktop feature'. But no success.
XtraWater said:
Hello
Mine is a G900F too.
I just upgraded to the latest RR version. Now I played around and it seems, auto rotation just works fine. It's even quite fast. Wow. If it stays that way, I'm more than happy. It also doesn't longer rotate the desktop. The behavior of auto-rotate seems to be now as it supposed to be.
Thank you very much. I upgraded RR last week the first time and thought...well...maybe that would solve it. So, I wouldn't tried it again without your suggestion.
Now I have to solve the issue with the status bar. It works well when I boot the phone into safe mode. With that I guess a particular app is responsible for this issue. But I wasn't able to identify it.
I had an app 'Bootmanager' but it end of life. I would like to disable 50% of the apps and see if it works. If not, disable the other 50%. Now I'm not sure what is the best way to isolate the culprit.
If i can solve this issue, then RR would provide all I need.
For the moment, I use the Xposed Edge modul (it's a great module btw.) were I'm able to expand the notification panel with a swipe gesture. That's ok.
I also played around with the 'extended desktop feature'. But no success.
Click to expand...
Click to collapse
Expanded desktop works fine for me in lineageos 15.1
The chances are the xposed framework itself or the module is taking over
I don't have xposed installed
TheFixItMan said:
Expanded desktop works fine for me in lineageos 15.1
The chances are the xposed framework itself or the module is taking over
I don't have xposed installed
Click to expand...
Click to collapse
I had the same idea and disabled Xposed module. Still same. Now, as I upgraded RR I tried to pull down the notification bar in Youtube fullscreen. Isn't possible. Then I installed Xposed Framework again.
For some reason this time I had not install TWRP again after the upgrade. Last time TWRP was gone.....
However, auto-rotation works perfect. Rebooted the device, tested it on several apps. That's fantastic.
XtraWater said:
I had the same idea and disabled Xposed module. Still same. Now, as I upgraded RR I tried to pull down the notification bar in Youtube fullscreen. Isn't possible. Then I installed Xposed Framework again.
For some reason this time I had not install TWRP again after the upgrade. Last time TWRP was gone.....
Click to expand...
Click to collapse
Although it's disabled it may still be causing the problem
Format system data cache
Flash only rom zip & mindthegapps and test
That will tell you if it's a rom issue or something else
If it's a rom issue logcat it & send to developer
TheFixItMan said:
Although it's disabled it may still be causing the problem
Format system data cache
Flash only rom zip & mindthegapps and test
That will tell you if it's a rom issue or something else
If it's a rom issue logcat it & send to developer
Click to expand...
Click to collapse
I uninstalled Xposed framework and tested it again. No luck. Then I uninstalled Nova Launcher. Also no luck.
There are not so many apps which are running in the background. I stopped a few....
I booted again in safe mode and it works just great.
I don't know what I further can do.
However, auto rotation is working great.
TheFixItMan said:
Although it's disabled it may still be causing the problem
Format system data cache
Flash only rom zip & mindthegapps and test
That will tell you if it's a rom issue or something else
If it's a rom issue logcat it & send to developer
Click to expand...
Click to collapse
Just an update: To get some practice with all that custom rom stuff TWRP. Then, I updated Gapps to the version of today. And now guess what... the status bar works in fullscreen.
With that, everything works fine.
e last thing what is a bit weird: I was able to search settings. For instance, when I searched Sound it came up several sound settings. Now it shows only apps which 'Sound' contains within the name. I guess I did somewhere changed the setting. But can't find anything.
Th
Finally it works. I updated TWRP and GAPPS. Whatever the issue caused, it's gone.