So, I recently ordered a new N910F on eBay to replace my dead N910T, which died catastophically last month after catching fire while charging. I recieved the F on the 11th, and all was working fine. Product was working exactly as seller described, new in factory-sealed and shrink-wrapped Samsung N4 box, complete with warranty paperwork. It even had the extras like stock charging cable/power supply and white earbuds. The sticky paper was on the screen as well. A visual inspection of the inside/outside of phone gave every appearance that it was in fact 100% new. Odin's download page read as Knox warranty 0x0, meaning it had never been rooted, TWRPed, etc. Completely virgin.
After powering it on I installed several OTAs until there were no more updates. At this point audio was fine, I had to test my SIM card to make sure calls worked, no issues.
Earlier yesterday I downloaded the following firmware from SamMobile, which is latest UK BTU:
https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/BTU/download/N910FXXU1DRI2/249766/
It flashed in Odin fine, I factory reset afterwards, ROM boots up.....but audio isn't working anywhere. I cant hear calls, YouTube plays videos but without audio, touch sounds dont work even though audio is completely turned up. It is also crashing/freezing semi-frequently.
I live in the US, I am using this phone on T-Mobile's network. At this point I'm stumped, a stock firmware flash *SHOULD* resolve this, but nope. I'm going to try for awhile to fix it some other way, if I can't then I will contact seller to see if they will return me return the phone for an exchange.
If anyone can suggest how this might be diagnosed and fixed then I'd appreciate the help.
Thanks!
Edit: I'm also trying to do an emergency firmware repair with Kies. I've tried both Kies 2 and Kies 3, they say device not supported. And they say that Samsung Smart Switch supports my device. But after installing Smart Switch, it also says device not supported. I'm going to try a KitKat downgrade with Odin and see what happens. I'm at wit's end here.
I wasn't able to flash KK, 7-Zip gave an error when trying to extract the tar.md5 from the zip. Anyway, I'm convinced that the speakers on my new F must have been defective out of box, there's no other possible explanation.
As a test, I flashed TWRP with Odin, then Resurrection Remix Pie by @mobspyguy.....audio doesn't work in RR either. Which means it isn't a firmware problem, since a custom ROM had the issue. I just find it strange that audio stopped working immediately after flashing stock firmware, but was OK before that.
So I'm going to Odin it back to stock, I already left a detailed message with the seller about an exchange, hopefully they'll get back to me on that.
Related
Hi all,
Ever since updating to the latest MGA via OTA firmware nearly 2 weeks ago the Wifi has been causing me a lot of issues. The following evening after updating the firmware, the wifi just randomly turned itself off and would refuse to turn on again. When I attempted to turn it back on via the widget, it would go grey as it's attempting to turn on but then it would just stay at that and it will not turn on at all. After a few minutes it will either go back to being completely turned off or the phone would just reboot itself.
Now, I have tried several things to rectify the problem i.e. applying the MGA wifi fix, factory restoring the phone via the settings and also in Kies, downgrading back down to the MEA firmware, re-flashing the stock MGA firmware via Odin and re-flashing both the MEA & MGA modems seperately - all to no sucess!
At the same time while all this is going on, the phone itself will sometimes randomly reboot itself when attempting to turn on the wifi or even in the rare case when the wifi does turn on and it will work for 5 or so minutes - the phone will reboot itself again while trying to simultaneously update various apps through the play store.
Lastly, the phone has already been sent back to Samsung a few days ago regarding this issue and the phone was returned back to me yesterday with Samsung apparently stating that they had diagnosed and found an issue with the phone (even though they could not tell me what??) and that they had sucessfully repaired it. Upon turning the phone back on going through setting up the phone again, I come to the wifi connection and guess what... it doesn't turn on. Yep that's right, I'm still stuck with the same problem!
I got straight onto Samsung on the phone and complained about this as I'm not happy at all, and they have agreed to have the phone back in for another repair and apparently something will be done properly this time.
It's not good enough though, to me all it looks like that Samsung have done their end on the original repair is re-flash it with the MGA firmware once again, shove it back in the box back to me and hope for the best. Even the Samsung agent on the phone yesterday could not tell me exactly how they apparently repaired the phone as there was not anything on the repair report what so ever, unbelievable!
Anyway, do any of you guys have any ideas with what else I can do my end to try and rectify the problem? To me though, this sounds like a physical hardware fault that only Samsung themselves can sort out...
Thanks - Liam
AndroidLEK said:
Hi all,
Ever since updating to the latest MGA via OTA firmware nearly 2 weeks ago the Wifi has been causing me a lot of issues. The following evening after updating the firmware, the wifi just randomly turned itself off and would refuse to turn on again. When I attempted to turn it back on via the widget, it would go grey as it's attempting to turn on but then it would just stay at that and it will not turn on at all. After a few minutes it will either go back to being completely turned off or the phone would just reboot itself.
Now, I have tried several things to rectify the problem i.e. applying the MGA wifi fix, factory restoring the phone via the settings and also in Kies, downgrading back down to the MEA firmware, re-flashing the stock MGA firmware via Odin and re-flashing both the MEA & MGA modems seperately - all to no sucess!
At the same time while all this is going on, the phone itself will sometimes randomly reboot itself when attempting to turn on the wifi or even in the rare case when the wifi does turn on and it will work for 5 or so minutes - the phone will reboot itself again while trying to simultaneously update various apps through the play store.
Lastly, the phone has already been sent back to Samsung a few days ago regarding this issue and the phone was returned back to me yesterday with Samsung apparently stating that they had diagnosed and found an issue with the phone (even though they could not tell me what??) and that they had sucessfully repaired it. Upon turning the phone back on going through setting up the phone again, I come to the wifi connection and guess what... it doesn't turn on. Yep that's right, I'm still stuck with the same problem!
I got straight onto Samsung on the phone and complained about this as I'm not happy at all, and they have agreed to have the phone back in for another repair and apparently something will be done properly this time.
It's not good enough though, to me all it looks like that Samsung have done their end on the original repair is re-flash it with the MGA firmware once again, shove it back in the box back to me and hope for the best. Even the Samsung agent on the phone yesterday could not tell me exactly how they apparently repaired the phone as there was not anything on the repair report what so ever, unbelievable!
Anyway, do any of you guys have any ideas with what else I can do my end to try and rectify the problem? To me though, this sounds like a physical hardware fault that only Samsung themselves can sort out...
Thanks - Liam
Click to expand...
Click to collapse
Well I have only had this problem with rooting phones etc... to me this happened with so many ROMs I tried. Even certain stock roms. I am not sure fully how I fixed it, but I know now I am running the OMEGA rom and this seemed to have worked for me so possible to try that? Just an option
PSPNikos said:
Well I have only had this problem with rooting phones etc... to me this happened with so many ROMs I tried. Even certain stock roms. I am not sure fully how I fixed it, but I know now I am running the OMEGA rom and this seemed to have worked for me so possible to try that? Just an option
Click to expand...
Click to collapse
When I first downgraded back down to the MEA firmware that I was linked to from another forum, I discovered straight after flashing that it was a pre-rooted ROM and the wifi still would not turn on then.
The phone has been sent back to Samsung again today for another repair but last night as a last ditched attempt, I downloaded & flashed the stock XXUAMDM firmware from April and the wifi still refused to turn on.
I'm still convinced that the problem itself is hardware related rather than software based going by that the problem is still present regardless of what ROM I'm on, it's just a case of trying to get Samsung to see that. I can understand now why that Samsung the first time round probably only did a fresh re-flash of the MGA firmware instead of going ahead and taking the phone apart/replacing parts as I imagine it's very labour intensive/standard procedure and not only that - the S4's mainboard (from what I've seen the wifi module is part of the mainboard) retails at over £200 which is a hefty repair cost on their part.
Liam
It is some sort of permissions issue.
If you do chmod 777 on /dev/*, /system/etc/wifi/* it should be working.
The only thing I haven't figured out is why
And it has to be done again after rebooting the phone, wich makes me sad.....
How I fixed my WiFi and sound problems after updating to latest firmware over
Hi there. (Sorry for any mistake about my English). By the way, I'm newbie on Android.
After freaking out about my WiFi problem, i didn't even care about the others problems like the sound, and I don't know if there were or if there is still some, but WiFi and sound got fixed.
After a lot of research on Google and XDA I came to the conclusion that if I could just re-install the firmware, I had
1- I Download the same firmware you are on (i guess it safer this way) I got the same (I9505VJUEMKE) that had caused the problem when was update trough Kies.
GT-I9505_PDA_I9505VJUEMKE_4.3
Changelist: 2210919
Build date: Wed, 27 Nov 2013
CSC: I9505ZTOEMKE_ZTO_Brazil
MODEM: I9505VJUEMKE
Gdrive: (créditos ao +Alexandre Affonso - Vlw)
Two links for download this firmware. (really fast download since its on gdrive)
goo.gl / UrZWAE .
goo.gl / omJC9e "
2- Unpack the Zip File
3- Putt the phone in "Download Mode"
4- Open Odin 3.07 and Connected the cable. (check if Odin linked a port to your phone, i didnt get any color change, just the COM Port number and the "added" mentioned on Odin)
5- Load the firmware on "PDA", wait a few seconds till Odin load it.
6- Click Start and wait the whole process. Don't disconnect the cable until Odin says that it was Successfully.
Finished!
After all I did the root with Odin + CF Auto Root + Supersu and So far everything is fine and better than before.
Hope I can help few of you guys.
Thanks.
I've spent a lot of time now trying to fix my phone and i'm really quite worried.
It's a Samsung Galaxy S4 SGH-I337M (CSC I337MOYAAAMDJ, Baseband I337MVLUAMDJ, version 4.2.2).
I have had CM 10 on it running perfectly fine for about a year. I decided to update it though and didn't know that you could update CM right from the phone , so I downloaded the software from their site onto my phone and onto my PC. Followed the instructions installation froze and didn't move forward for over a day .... so I gave up.
I went looking for and downloaded the phone's stock firmware for both my carrier (Virgin Mobile, Canada) and for Bell's, so I installed TWRP with Odin 3.07 without issue. When I install the stock firmware my WiFi will not turn on.
So i've tried installing several rom's putting them on the SD card and using TWRP on my phone and i've found out that if I use Goldeneye and tell it my phone is an I9505, or hyperdrive (I9505) or at the moment Google Play Edition (JFLTE 5.01, kernel = Googy-Max3) that the WiFI DOES TURN ON as soon as the rom is loaded !!! So I thought I was good, but no
When flashed with either it's stock I337M firmware or these custom I9505 rom's my phone will play no audio. Chrome just crashes if I go to play any music or video. If someone call's, the ringer doesn't work but after several 'rings' my phone start's to vibrate indicating they called (aka the dialer lags out and then crashes). I can make calls too but when I talk the recipient can't hear me, nor I them.
It downloaded and re-installed all the app's of my google backup totally fine and using wi-fi. It play's games fine (but with no sound), i can txt fine, etc. It notices and connects to the network (Virgin Mobile) fine (I turned off wifi and tried downloaded stuff, txts go back and forth, and my phone labels Virgin)
I'm on a stupid 2 year contract and this phone cost $650 at the time I got it. It's knox 0x1 so no warranty to have it repaired. Does ANYONE have ANY idea what might be causing my phone not to play any sound's? I've tried pretty much everything I can think of.
I'd be willing to live with a totally cripples phone ... but it's got to at least work for receiving or sending phone calls and this sound issue crashes the dialer and even if I manage to pickup when it's vibrating before the other person has hung up there's no sound, neither of us can hear each other .
Does ANYONE have ANY idea what could be doing this or how to fix it? I'm so depressed and worried right now that I just a phone I spent a lot of money and am on a stupid contract on :/. I fixed the wifi problem by flashing with a rom that 'makes it' a GT-I9505G, baseband I337MUMUAMDL (v 5.0.1) (vs SGH-I337M, baseband I337MVLUAMDJ (v 4.2.2)), but the same sound and audio/media problem exist's no matter what firmware or version the phone ends up being .
I should have just left it with CM as it was but *sigh* here I am, please help.
masterof1010 said:
I've spent a lot of time now trying to fix my phone and i'm really quite worried.
It's a Samsung Galaxy S4 SGH-I337M (CSC I337MOYAAAMDJ, Baseband I337MVLUAMDJ, version 4.2.2).
I have had CM 10 on it running perfectly fine for about a year. I decided to update it though and didn't know that you could update CM right from the phone , so I downloaded the software from their site onto my phone and onto my PC. Followed the instructions installation froze and didn't move forward for over a day .... so I gave up.
I went looking for and downloaded the phone's stock firmware for both my carrier (Virgin Mobile, Canada) and for Bell's, so I installed TWRP with Odin 3.07 without issue. When I install the stock firmware my WiFi will not turn on.
So i've tried installing several rom's putting them on the SD card and using TWRP on my phone and i've found out that if I use Goldeneye and tell it my phone is an I9505, or hyperdrive (I9505) or at the moment Google Play Edition (JFLTE 5.01, kernel = Googy-Max3) that the WiFI DOES TURN ON as soon as the rom is loaded !!! So I thought I was good, but no
When flashed with either it's stock I337M firmware or these custom I9505 rom's my phone will play no audio. Chrome just crashes if I go to play any music or video. If someone call's, the ringer doesn't work but after several 'rings' my phone start's to vibrate indicating they called (aka the dialer lags out and then crashes). I can make calls too but when I talk the recipient can't hear me, nor I them.
It downloaded and re-installed all the app's of my google backup totally fine and using wi-fi. It play's games fine (but with no sound), i can txt fine, etc. It notices and connects to the network (Virgin Mobile) fine (I turned off wifi and tried downloaded stuff, txts go back and forth, and my phone labels Virgin)
I'm on a stupid 2 year contract and this phone cost $650 at the time I got it. It's knox 0x1 so no warranty to have it repaired. Does ANYONE have ANY idea what might be causing my phone not to play any sound's? I've tried pretty much everything I can think of.
I'd be willing to live with a totally cripples phone ... but it's got to at least work for receiving or sending phone calls and this sound issue crashes the dialer and even if I manage to pickup when it's vibrating before the other person has hung up there's no sound, neither of us can hear each other .
Does ANYONE have ANY idea what could be doing this or how to fix it? I'm so depressed and worried right now that I just a phone I spent a lot of money and am on a stupid contract on :/. I fixed the wifi problem by flashing with a rom that 'makes it' a GT-I9505G, baseband I337MUMUAMDL (v 5.0.1) (vs SGH-I337M, baseband I337MVLUAMDJ (v 4.2.2)), but the same sound and audio/media problem exist's no matter what firmware or version the phone ends up being .
I should have just left it with CM as it was but *sigh* here I am, please help.
Click to expand...
Click to collapse
try with this firmware
lets me see
k thanks i'll try it (once it's slow download is done) and update this post. Looks the same except I guess it's android v5.0.1 (well and it's a different CSC/PDA).
K well i've tried that firmware and it's given me some abnormal problems.
Odin typically just writes in like two minutes and boom done, but when I tried to flash with the firmware you suggested like every 15 seconds it would say ...
"Receive Response from boot -loader"
"Transmission Complete.."
"Now Writing .. Please wait about 2 minutes"
It kept cycling through those 3 messages until it FINALLY finished and it say's PASS but it took 9 min 53 seconds which is like 5 times longer then it's ever taken.
Wheather this is relevant or not i'm not sure just trying to give as much details as I can.
Anyways, after booting the phone the samsung logo came up as usual and usually it takes like 5-10 min sitting at this logo before the phone completes loading, presumably setting up the firmware I imagine.
It's been now sitting at that logo for over 20 minutes and i'm about to try wiping with TWRP the davlic cache/cache/data/internal and either trying again with odin (v3.07) OR
If that contines to not work I might put the tar.md5 on the external SD card and recover a saved backup I have on the SD card (with the stock firmware I had before that doesn't allow Wi-Fi to be enabled nor audio/media to play) and use Mobile Odin Pro .apk (I paid for the pro version) from within that restored recovery to flash the firmware you suggested to my phone again.
This is probably redundant but I just figure I might as well try absolutely everything I can possibly think of with your firmware.
If you have any idea why I might be experiencing these abnormal Odin flashing and/or initial loading conditions of the firmware you (or anybody ) suggested i'd appreciate any advice you can give.
I'm going to try and reflash with Odin on my PC again right now (i'm certain thing's like the USB cable are fine and my PC and phone can transfer data without issue .. but that's why i'm going to try mobile odin if after this next attempt doesn't work either).
I'll keep the thread updated, any and all advice is welcomed and highly appreciated
EDIT: OMG it made a like startup theme sound ... that's the first time it's outputted sound in 3 day's !!! It's at the Samsung screen loading the newly flashed firmware so hopefully that completes because wow my phone made noise finally !! Now to wait, and wait....
It won't go past the Samsung logo. So I guess i'll try Mobile Odin. I don't have much faith but it's worth trying.
Uh the backup of the stock firmware I made won't load ... but the hyperdrive rom did. Sound and the dialer work perfectly fine in this rom now, so I guess thing's are more or less fixed. Even though i've wiped the cache/davlic/internal/data in order to prepare to flash the other firmware or this hyperdrive rom (I wipe it every time) in this rom it's reporting my phone's baseband to be I337MVLUGOC4 which is that of the firmware you suggested ...
I'd still rather not use this rom, I thought it was ok at first but meh i'm going to try to go back to CM (after all this *rolls eyes*), trying to use Mobile Odin to install the firmware that you recommended and that appears to have ... somehow fixed the sound can't detect the model of my phone and is dumping, this is not something that has happened with the app before so I don't think i'll be flashing the firmware you suggested.
If it did something to globally fix the crashing when an app was instructed to play audio as it appears to have I guess i'm going to just go download the full CM now, put it on the SD card and install it with TWRP.
So uh, not 100% there yet but it does appear what you've suggested has solved my problem (because worst case scenario i'll just be stuck with the Hyperdrive rom ... but i'll have a working phone) so thanks so much bud I was quite upset and worried about what I was going to do still paying off a useless phone on a contract i'm stuck with for another year still.
I suppose there's no real need in continuing to update this thread as it appears my problems are solved and all that's left are things i'm doing not to fix anything but just because of personal preference over what rom to use but if you want to know anything more just ask, otherwise thank you so much you saved my ass and i'm very grateful.
Hello,
My story is pretty much the same as other people here. 2 weeks ago I rooted my S6 edge + and everything was fine, the device was working I downloaded lots of apps that needed special root permission done a lot of ad blocking---- Long story short the root was successful with ODIN and everything was working fine, I didn't mess around with other parts of the OS tho. So today I was checking my snap chat when all the sudden my phone started lagging, it does that every once a while, it used to happen on my note 3 too its just Samsung bug. Anyways it was lagging so I decided to press the restart button, I put the phone on my desk and continued to finish my work on my laptop about half an hour later I checked my phone for snap chats, but i realised that it didn't turn back on. I held the power button and this came up on top left corner.
KERNEL IS NOT SEANDROID ENFORCING (this one showed up before every time I booted after my root)
CUSTOM BINARY BLOCKED BY FRP LOCK (this one was new tho, I never seen it before)
Which means Im F***** because Im on a bootloop, and my battery could die anytime...
So I've done a little researching and I came up with the conclusion that I can use ODIN to put Official stock firmware back on my phone, but as I think everyone knows. I don't think there is Official stock firmware for G928W8. Which is weird, its the only firmware left out by who ever creates or extracts official firmware off Samsung phones. I also tried using smart switch but the device is apparently is not supported, although ODIN recognises it. I tried re rooting, on my phone it said Custom Binary(BOOT) blocked y FRP Lock. So basically I paid $1,150.00 and my phone bricked itself after 2 weeks. No stock firmware for G928W8, and no luck with Smart Switch. I don't have any other phone to use while an original stock firmware gets released by XDA. I looked pretty much everywhere there is no G928W8 Stock Firmware. So any ideas I really need to make some calls?
Thanks,
Artin P
Bro. I had the same problem couple of days ago but I managed to restore my phone like you mentioned by flashing the Original firmware via Odin and I remember seeing your version as well at Sammobile.com check it out you might want to subscribe to their cheapest subscription which is about $8 for a 14day subscription but the download time will be worth it trust me.
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
I'm having a similar issue. This afternoon, 2 apps threw errors and closed. I rebooted, which apparently was the wrong thing to do. The reboot stalled on the AT&T logo and stayed that way for 5 min - the unit became very hot & the power button did not respond, even while holding it down. I got into recovery, cleared the cache and factory reset, then rebooted. The unit came back up and started reinstalling everything. I took it back down into the download status and attempted to reload 935x via Odin, only to stall at "initialzation" [sic] as you did. I got out of that after waiting for some sort of response. SuperSU was still in my apps as was Root Checker. Root Checker indicates the system is rooted. SuperSU indicates it needs the binary updated. BusyBox and TiBu indicate they cannot find root. I deleted all the root apps and tried reinstalling root via adb which completed successfully, but the same outcome with all the root apps. So I'm not sure if I'm still really rooted as Root Checker claims, or not.
EDIT: I just saw that I have 2 "Knox Settings" apps. Clicking on either returns, "Unfortunately, Container Agent2 has stopped."
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
NovaEDM™ said:
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
Click to expand...
Click to collapse
I was having the exact same problem you had with Odin. It seemed I was able to flash stock firmware using this version of Odin: http://www.mediafire.com/download/2t2sjqxtogbkafk/odin_3.12.3.rar
rob219 said:
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
Click to expand...
Click to collapse
did you have any problems with the u version of the s7 edge firmware, like the fingerprint scanner not responding? i am on that version and cant get any odin version or any version of s7 edge g935a firmware to flash, tried unrooting and was forced to use the U version of the s7 edge firmware, everything works except the fingerprint scanner, cant get back to full stock firmware, need help!
im having the exact same problem, when i put my phone into download mode and flash the stock at&t firmware, Odin get stuck in "initialization" and my phone screen displays and error message.
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
nicetucu said:
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
Click to expand...
Click to collapse
I used Odin_v3.12.3_Patched_SHA256 to flash the 935U Firmware then used Odin3_v3.11.2 to flash the June Firmware release.
Hi All,
So, I have spent 2 days trying to get my Galaxy s8+ back to normal. However, I seem to only have made it worse. It all happened when I decided to change the /data partition from ext4 to another format and then back again to get the /data partition to mount in TWRP after flashing Pascal Rom. However when I rebooted, nothing worked, no boot up screen, no recovery, no life, but all I could get was download mode. It then must of froze up after another restart and I couldn't get anything for 12 hours or so.
The next step I tried once i got download mode again was to flash stock firmware for the G955F, I can't remember the version of this firmware, but I still had nothing change. So then i flashed the latest firmware from SamFirm's downloading client, which was G955FXXU2CRF7 - Australian Optus Branded Firmware (OPS). I was able to get as far as the "hello start screen" and then my phone restarted, it then tried to upgrade my system again, then started "erasing" and then it rebooted and I still had the same issue, nothing but download mode and still no recovery, it still wouldn't turn on. So I flashed the latest International/Unbranded Australian firmware (XSA) - G955FXXU3CRGH, still the same result. I now can't go back to the OPS version of firmware because I get the Check error with the bootloader (since it's a more recent version), so I can't go backwards. I also can only flash "Official Binaries" now. Oh and to make things worse, I read that Odin Option "Nand Erase" just erased user data, so I thought I might as well try it, and as a result, I now can't flash even the (XSA) firmware because of ODIN failing and I now have an "An Error has Occurred while updating the device software. Use the emergency recovery function in the smart switch PC Software.". I am a bloody idiot :good: . Oh, I have tried multiple versions of Both Samsung Kies & Smart Switch (Which both had the option for "recovery & initialisation"), however, I get a message that my device is unsupported after adding in my device model and S/N. I tried a PIT file and then found out it's now included in all the latest firmware img files.. so yeah lol. Fun times. Soooo I feel like I am out of Options, nothing I do is working. The worst of all this is my wife is not happy haha which means after years of tinkering with android phones (flashing custom ROMS, Kernels, Root Solutions, e.c.t ), this may be the end of the road for me if I can't fix this phone. I really hope this thread isn't true too : https://forum.xda-developers.com/galaxy-s8+/help/sm-g955fd-access-download-mode-t3748228
So Please, someone help me out if it is at all fixable even if it requires opening the phone up lol.
The stats i have on download mode are the following:
RMM State as Prenormal
OEM Lock: OFF
FRP Lock: OFF
CARRIER_ID: OPS (which is super weird because it only accepts XSA to be flashed :S )
Secure download: Enabled
System Status: Custom
Warranty Void: 1
Current Binary: Samsun Official
If you need more, just let me know.
Ok, quick update: I have got rid of the error that I mentioned. I managed to flash XSA firmware again, it went to the blue Andriod is updating the system screen, then started "erasing" then rebooted and nothing again, still only download mode available. Nothing happens when I try to turn it on or try recovery mode.
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Quick Update: Maybe Fixed now!
Even though no one has replied yet, as it's only been an hour or so. I just wanted to let anyone else know who is experiencing a similar issue in the future on how to possibly fix it.
This was a real nightmare, however quick disclaimer, I am not responsible for any damage incurred to your device/property by following my instructions.
So the way I have fixed it, is I flashed the AP file only (from the firmware zip i had downloaded from SamFirm) with "Auto Reboot" Off. When ODIN finished, I held the Vol Down + power button, to reset it. It gave me a blue "No Command" Screen, I then waited and it then went black and the recovery screen appeared. I cleared the cache, rebooted to bootloader, which it didn't turn back on, so I left it because I thought it was the same thing. Came back 10 mins later and turned it on (or hard restarted, can't remember) and it worked. It booted!
I did soon learn it looks like it was having a charging problem because it had no charge and kept telling me there was water in the port (even though it was dry), I restarted it again after putting it on a wireless charging pad and it is seeming fine so far with the USB charger. So big note to anyone in the future, that it could be possibly bugging out with charging as well if you can't get it back on. I did have the device tell me here and there the last two days that there was water in the port when it was off. So kinda weird.
I know this all sounds a little hocus pocus, superstitious almost, but hey, my phone is working, so maybe replicating my actions may just help lol. :cyclops:
spawnlives said:
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Click to expand...
Click to collapse
Oh right, well, I did hear that SamFirm is not supported anymore, as that's where that firmware came from. Maybe it's dishing out incorrect firmware now? Possible the structure of where ever it is getting its firmware from (pretty sure it's pulled from samsung) has possibly been altered?
Just for reference I use www.updato.com for downloading firmware it is usually up to date. No reference to the firmware you mentioned (not for Australia anyway)
The screenshot I took: Imgur link:
https://imgur.com/a/lqyzWW7
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
spawnlives said:
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
Click to expand...
Click to collapse
Yeah, it's seeming to work now, but my fast charge isn't working. However, my other oreo ROM didn't work with fast charge either. So i am unsure if it is my phone or an orio bug :/ lol
Well at least you got it working and not using as a door stop
that was really sad story man.....
spawnlives said:
Well at least you got it working and not using as a door stop
Click to expand...
Click to collapse
Yeah haha, so glad it's not a door stop haha